is there a custom firmware similar with stock one with no modification and has live wallpapers ?
Wildpuzzle is the closest to what you are looking for. It has all the features of stock and has support for LWPs.
but is it stable ?does it have bugs ?
Of course it is stable. I have used it before switching to CM7, and had absolutely no complaints. As for known bugs, I dont think there is any. If you wish to use Wifi hotspot + OC support, get kernel 0055 from OLD Wildpuzzle thread.
Hi all,
For everyone asking about custom roms ont 2.3.4 here is the situation :
For everyone who have upgraded the MS2 to the Official 2.3.4, no step back is possible to Froyo 2.2 or 2.2.2.
custom ROMs based on Froyo will not work (like CM7/9 from Tezet.)
=> Someone will have to build on based on the 2.3.4 kernel.
custom ROMs based on Chinese GB seems to work...
=> MS2Ginger for exemple.
custom ROMS based on Defy+ ROMs ?
So, who want that the CM or MIUI ROMs are ported to the newer Motorola kernel ? (So everyone could choose between BLUR, CM and others ?)
I say it on an other thread that the ms2ginger and the argen2stone roms are running on an ms2 with stock gb rom. Somebody must make an cm7 with the 2.3 kernel than wie can use customroms.
thanks for your thread.
But my question is, this official rom 2.3.4 does work better than froyo? or the custom rom 2.3.7 de CM7? It might be a dumb question or it's answered in another thread, if that case sorry.
Thanks
Yes i want Miui with the new kernel ! For a better touchsreen sensitivity for eg.
I try Argen2Stone 2.7 RE but i dont see adjust scrips and keep the old dialer from stock rom.
The 2.3.4 brings some bug fixes, and some upgrades.
From the kernel point of view, the same release is used (Linux Kernel 2.6.32.9). So no major bug fixes at kernel level for my point of view. Maybe some parameters changed.
The main point is for the "upgraders" to Gingerbread that can't go back to Froyo.
boorce.com said:
Hi all,
For everyone asking about custom roms ont 2.3.4 here is the situation :
For everyone who have upgraded the MS2 to the Official 2.3.4, no step back is possible to Froyo 2.2 or 2.2.2.
custom ROMs based on Froyo will not work (like CM7/9 from Tezet.)
=> Someone will have to build on based on the 2.3.4 kernel.
custom ROMs based on Chinese GB seems to work...
=> MS2Ginger for exemple.
custom ROMS based on Defy+ ROMs ?
So, who want that the CM or MIUI ROMs are ported to the newer Motorola kernel ? (So everyone could choose between BLUR, CM and others ?)
Click to expand...
Click to collapse
I tryed to flash MS2Ginger but the MS2 doesn't turn on.
I don't know.
could Anyone post how to flash step by step ?
tks
I think that the new kernel can improve MS2 performace so a rom based on the new kernel it's much better than the old modded rom.
Simokill said:
I think that the new kernel can improve MS2 performace so a rom based on the new kernel it's much better than the old modded rom.
Click to expand...
Click to collapse
I have the same idea...waiting for some MIUI or CM7 based on this new kernel.
I'd like someone who knows what they are doing to de-blur it. I have removed as much as I dare but still have too much moto... rubbish on the phone.
yeah agreed with u guys i wish a custom rom based on new gb 2.3.4
diavolobianco said:
yeah agreed with u guys i wish a custom rom based on new gb 2.3.4
Click to expand...
Click to collapse
+1
or new FR
is true. I think it's time to leave the kernel of froyo that is old and start to compile with the new kernel brings improvements and is of GB!
GB kernel is in fact the same linux kernel version as froyo kernel, so there are not any improvements except for some minor patches.... So no reason to leave froyo.
I just don't get why you all guys updated to GB and then you all crying, you can't use custom roms and that froyo kernel is old and why gingerbread isn't used... GB kernel in custom roms isn't high priority in dev right now. Deal with it. GB kernel don't bring any valuable improvements, so only reason to leave froyo and get in GB are you all, who did that mistake and upgraded to official GB without even reading the forum here (because it was already written so many times there...).
No offense please, I'm just sayin' that GB kernel in custom roms don't have high priority, because of missing downgrade capability and because they don't bring nothing so exciting and big or valuable, nothing worth. So when dev update to GB, he can't go back to froyo - and this is quite big limitation...
Actually CM9 does work over Euro GB kernel. It is based on Chinese GB kernel. And I must say Tezet has made some really good progress with CM9.
And Defy ROMs based on Defy+ kernel have also been proved to work on Euro GB kernel.
These ROMs work if we remove devtree.img and boot.img from the update.zip and thus only flash system.
So I guess it is only a matter of time.
Anonymous_ said:
I just don't get why you all guys updated to GB and then you all crying, you can't use custom roms and that froyo kernel is old and why gingerbread isn't used... GB kernel in custom roms isn't high priority in dev right now. Deal with it. GB kernel don't bring any valuable improvements, so only reason to leave froyo and get in GB are you all, who did that mistake and upgraded to official GB without even reading the forum here (because it was already written so many times there...).
Click to expand...
Click to collapse
Good sir, your silver tongue rivals that of our finest bards! Please, travel amongst the populace, spreading joy and soothing woes.
Anonymous_ said:
I just don't get why you all guys updated to GB and then you all crying
Click to expand...
Click to collapse
No crying here, just discussion, which is what the forum is for. What was your point?
may be it's better to find a way to downgrade.
Kangburra said:
No crying here, just discussion, which is what the forum is for. What was your point?
Click to expand...
Click to collapse
I think I said my point clearly... But once again then:
I'm just sayin' that GB kernel in custom roms don't have high priority, because of missing downgrade capability and because they don't bring nothing so exciting and big or valuable, nothing worth. So when dev update to GB, he can't go back to froyo - and this is quite big limitation...
And don't take my words too personal. Easy man, easy...
Sometimes it's cool to have stock ROM. But,it will be much cooler if we can switch to custom ROM's. Stock ROMs are slower and less free RAM than CM7 or MIUI. Now,I'm getting bored with MS2Ginger2.1.
All we have to do is just wait..
hi, did anyone manage to overclock after updated to stock 2.3?
android overclock doesn't work anymore after i updated
I've just flashed the Official ICS Room and made the root my self ! I prefere the Stock room's, but when i'm tring to flash the Pershoot Kermel, with overclock, i can't get the wi-fi working, anyone can tell me why ? I know that pershoot kermel is made for the CM Room, but dont work in any other? If dont can you tell me a Kernel with oc that work in my rooted stock rom ?
Other question, is it possible to flash a 7510 Rom in a 7500 tablet ? i got the 3g version but i never use the 3g, and i've want to try the Task Room, everybody says it the best one and i'm curious.
Ps: Sorry for the bad english
Pershoots kernel does not support the official ICS ROM. He said he might do a one time release of his kernel for the official ROM..
Bummer
Perhaps I'll get my hands on it so WiFi will work,won't promise though...
rueloparente said:
I've just flashed the Official ICS Room and made the root my self ! I prefere the Stock room's, but when i'm tring to flash the Pershoot Kermel, with overclock, i can't get the wi-fi working, anyone can tell me why ? I know that pershoot kermel is made for the CM Room, but dont work in any other? If dont can you tell me a Kernel with oc that work in my rooted stock rom ?
Other question, is it possible to flash a 7510 Rom in a 7500 tablet ? i got the 3g version but i never use the 3g, and i've want to try the Task Room, everybody says it the best one and i'm curious.
Ps: Sorry for the bad english
Click to expand...
Click to collapse
Check the Dev section - The A1 kernel is designed for stock ICS. The XE version I believe is OC'd to 1.4 GHz if I'm not mistaken.
I don't have a 3G tablet to be able to say for sure but I believe lots of ROM threads have info where people have asked this question. Research the Task ICS thread for details but I believe you'll be fine - short of losing 3G of course
The A1 kernel did nothing to fix the issue on my device(flickering screen still...),I don't say it's useless though...
Is it at all possible to just update the bluetooth stack from the new 4.3 release to a 4.2 rom? I don't want to give up pacman rom (or illusion) but it might be awhile before they move over to 4.3. AVRCP 1.3 is the main feature I want from 4.3. Is there any way to go about this?
superkevx said:
Is it at all possible to just update the bluetooth stack from the new 4.3 release to a 4.2 rom? I don't want to give up pacman rom (or illusion) but it might be awhile before they move over to 4.3. AVRCP 1.3 is the main feature I want from 4.3. Is there any way to go about this?
Click to expand...
Click to collapse
I was searching some time ago and I didn't find anything.. the PA team said they may have merged android 4.3 today in his ROM..
I have some audio issues with some games (constant distorsions and cracks)
I am on KitKat Omega rom with Civz 1.9 kernel. I like this combination, it is pretty smooth and error free, but i was wondering if, by trying other kernels i could obtain some new audio drivers to achieve better sound in those games.
https://forum.xda-developers.com/galaxy-note-3/orig-development/adreno-330-drivers-note-3-t3523915
Thank you, so it's in the Rom. One more question if i may.
Can i go from Kit Kat directly to 6.0 custom rom? And (in case i want to go back) vice versa? Thanks buddy!
you should update to the latest availiable stock at first. theb you can istall custome 5/6/7 based rom
I had the latest official (5.0) and went down to custom KitKat 4.4.2, which is great so far, but, if there is room for improvement, i may give it a shot.
Question is, am i bootloader proof ?