Flashing error [solved] - HD2 Windows Phone 7 Q&A, Help & Troubleshooting an

Hi guys!
I was using one of pdaimatejam's roms, then i saw that dxdy posted a version with the 5.51 radio so i tried to flash it over the old rom. Im getting these:
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
What am i doing wrong? It also comes when i try to flash the old rom back so what did i mess up?
Thanks in advance.
EDIT: Changed the USB port n flashed again, it worked. Sorry to bother anyone, just ignore this post

zenekbezdesek said:
Hi guys!
I was using one of pdaimatejam's roms, then i saw that dxdy posted a version with the 5.51 radio so i tried to flash it over the old rom. Im getting these:
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
What am i doing wrong? It also comes when i try to flash the old rom back so what did i mess up?
Thanks in advance.
EDIT: Changed the USB port n flashed again, it worked. Sorry to bother anyone, just ignore this post
Click to expand...
Click to collapse
If you are using front USB ports on PC, it may have little less power than rear ports. Always use rear usb ports for such things. For laptops all have same power.

Related

[ERROR] DFT ANDROID SEND PARTITON DATA failed

I installed a NAND android rom but I didnt like it, so i downloaded a different one, went to usb flasher, ran the DFT android installer but then i get this:
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed
Info: .\RSPL\RSPL.cpp (586)
On the phone it told asked me if i wanted to clear an old partition so i pressed yes but still didnt work. I am new to this "flashing android to hd2", pls help this is getting very annoying
faizan445 said:
I installed a NAND android rom but I didnt like it, so i downloaded a different one, went to usb flasher, ran the DFT android installer but then i get this:
Error Description: send partition data failed
Info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed
Info: .\RSPL\RSPL.cpp (586)
On the phone it told asked me if i wanted to clear an old partition so i pressed yes but still didnt work. I am new to this "flashing android to hd2", pls help this is getting very annoying
Click to expand...
Click to collapse
try this : http://forum.xda-developers.com/showthread.php?t=945427
no workie
Looked promising but it didnt work, thanks for the reply tho
If you are using Vista or Win7,
you need to run the DFT.exe as Admin.
Right klick on DFT.exe
and then run as Administrator.
Im using winxp 32bit sp2 i still tried to run as admin but still not working... im going back to the SD version of android for now......

Can't flash using DAF ???

Hi guys ...
i have a problem when trying to flash my HD2 with any ROM using DAF
like DANDIEST ROMs
and here is the error i get (in the attachements)
Error happen
Read belew for more information
Error Description: send partition data failed
info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed.
info: .\RSPL\RSPL.cpp (586)
hasni2005 said:
Hi guys ...
i have a problem when trying to flash my HD2 with any ROM using DAF
like DANDIEST ROMs
and here is the error i get (in the attachements)
Error happen
Read belew for more information
Error Description: send partition data failed
info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed.
info: .\RSPL\RSPL.cpp (586)
Click to expand...
Click to collapse
[FIX] for Nand USB Init Failed The solution has already been stickied to the top of this forum. Try to search for your problem before you ask.
Before trying out the above solution...confirm if u are supposed 2 run DAF.exe instead of RUU.exe...???...
I say dis cuz i was once stuck trying 2 install stuff(can't remember wat) n i was supposed 2 run d RUU included in d downloaded folder but hweva i kept running DAF..naturally it didn't work ...So try it.
h.nocturna said:
[FIX] for Nand USB Init Failed The solution has already been stickied to the top of this forum. Try to search for your problem before you ask.
Click to expand...
Click to collapse
Thank you for the replay
I have already tried this but it does not work
knowing that I have already installed this ROM for many times

[Q] HEEEEELLLLLLPPPP nand

okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
i think you installed mgldr,after that don't click daf.just find a rom from nand thread,follow its instructions,if you can't, ask for help again.
You need to make sure you to right click on your mouse and Run as Administrator before running the DAF.exe file.
terrell60612 said:
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
Click to expand...
Click to collapse
u can help us by writing the steps u followed ... so we can help u ...u must mised solething ...

[Q] Error in MAGLDR

Hi guys,
I've got a problem when flashing a new ROM on my beloved HD2 and I hope you can help me.
I tried different roms and different SD-Cards, but I always get the same error message:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Does someone of you have an idea, why this happens?
Thank you
drwoonzer
a wp7 rom? (lose 5 points for total lack of info),, did you remember to 'use last 24m' first?
Thank you for the reply, indeed I tried different WP7 roms.
Changed the setting and worked
Thanks a lot

[Q] Need help in installing Windows Phone 7.

Every single time I try installing Windows Phone 7 on my HTC HD2 using DFT Windows Installer for HTC Leo [DWI100], I get an error saying the following..
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Please help. I need this to be installed asap, in a huge trouble.
read install tutorial from my signature...
compatibility issues
VishhSnoopy said:
Every single time I try installing Windows Phone 7 on my HTC HD2 using DFT Windows Installer for HTC Leo [DWI100], I get an error saying the following..
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Please help. I need this to be installed asap, in a huge trouble.
Click to expand...
Click to collapse
Seems like a compatibility issue. But windows automatically detects that and fixes it the next time u run the DWI. I had this same problem and it was compatibility. U can fix that manually by right clicking on DWI, go to properties, go to the compatibility tab, enable the option run this program in compatibility mode for *OS*, apply changes. Now run the installer again.

Resources