Hi guys,
I've got a problem when flashing a new ROM on my beloved HD2 and I hope you can help me.
I tried different roms and different SD-Cards, but I always get the same error message:
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Does someone of you have an idea, why this happens?
Thank you
drwoonzer
a wp7 rom? (lose 5 points for total lack of info),, did you remember to 'use last 24m' first?
Thank you for the reply, indeed I tried different WP7 roms.
Changed the setting and worked
Thanks a lot
Related
Hi guys ...
i have a problem when trying to flash my HD2 with any ROM using DAF
like DANDIEST ROMs
and here is the error i get (in the attachements)
Error happen
Read belew for more information
Error Description: send partition data failed
info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed.
info: .\RSPL\RSPL.cpp (586)
hasni2005 said:
Hi guys ...
i have a problem when trying to flash my HD2 with any ROM using DAF
like DANDIEST ROMs
and here is the error i get (in the attachements)
Error happen
Read belew for more information
Error Description: send partition data failed
info: .\RSPL\RSPL.cpp (802)
Error Description: flash write failed.
info: .\RSPL\RSPL.cpp (586)
Click to expand...
Click to collapse
[FIX] for Nand USB Init Failed The solution has already been stickied to the top of this forum. Try to search for your problem before you ask.
Before trying out the above solution...confirm if u are supposed 2 run DAF.exe instead of RUU.exe...???...
I say dis cuz i was once stuck trying 2 install stuff(can't remember wat) n i was supposed 2 run d RUU included in d downloaded folder but hweva i kept running DAF..naturally it didn't work ...So try it.
h.nocturna said:
[FIX] for Nand USB Init Failed The solution has already been stickied to the top of this forum. Try to search for your problem before you ask.
Click to expand...
Click to collapse
Thank you for the replay
I have already tried this but it does not work
knowing that I have already installed this ROM for many times
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
i think you installed mgldr,after that don't click daf.just find a rom from nand thread,follow its instructions,if you can't, ask for help again.
You need to make sure you to right click on your mouse and Run as Administrator before running the DAF.exe file.
terrell60612 said:
okay so im fairly new to all of this so y problem is i have a htc hd2 and i was trying to unlock it i guess with the nand software but when i get to the usb flasher mode the dft software reads Readme.txt for this release is missing.so i clicked next and it reads
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
now my phone is stuck like this and i dont have a replacement phone ugh please somebody help
Click to expand...
Click to collapse
u can help us by writing the steps u followed ... so we can help u ...u must mised solething ...
Hi anyone,
I have HTC HD2
check I got : PB81100-HC
SPL-1.42.HSPL XE
please avice me what I need if I want upgarde win 7 or newest Android 2.3.7
hope everybody can help thanks
only one HSPL is right for Android and WP7: 2.08
use hspl2 to uninstall hspl and install spl1.42, then use hspl 4 and install hspl2.08 (not hspl3.03)
go here http://forum.xda-developers.com/showthread.php?t=611433
then you need magldr 1.13.......(remember, you will lose wm6.5 now)
then flash any wp7/ android rom using magldr
thanks, I will try now please teel me where can I get win7 or Android 2.3.7.?
for WP7 recommended this one
http://forum.xda-developers.com/showthread.php?t=1356833 - links for ROM
for android search here
http://forum.xda-developers.com/forumdisplay.php?f=928
no problem installed for android, thanks for you all great work
but for WP7
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (993)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
do you know why?
Which Android is most stable for SD or dual boot with Mango??
universal said:
no problem installed for android, thanks for you all great work
but for WP7
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (993)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
do you know why?
Click to expand...
Click to collapse
you not read instructions... in magldr menu must use Settings - Use24LASTNAND
---------- Post added at 07:31 PM ---------- Previous post was at 07:30 PM ----------
SOHOM said:
Which Android is most stable for SD or dual boot with Mango??
Click to expand...
Click to collapse
for SD version look here
http://forum.xda-developers.com/forumdisplay.php?f=735
i tested this
http://forum.xda-developers.com/showthread.php?t=1361940, links is here
Hi guys!
I was using one of pdaimatejam's roms, then i saw that dxdy posted a version with the 5.51 radio so i tried to flash it over the old rom. Im getting these:
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
What am i doing wrong? It also comes when i try to flash the old rom back so what did i mess up?
Thanks in advance.
EDIT: Changed the USB port n flashed again, it worked. Sorry to bother anyone, just ignore this post
zenekbezdesek said:
Hi guys!
I was using one of pdaimatejam's roms, then i saw that dxdy posted a version with the 5.51 radio so i tried to flash it over the old rom. Im getting these:
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
What am i doing wrong? It also comes when i try to flash the old rom back so what did i mess up?
Thanks in advance.
EDIT: Changed the USB port n flashed again, it worked. Sorry to bother anyone, just ignore this post
Click to expand...
Click to collapse
If you are using front USB ports on PC, it may have little less power than rear ports. Always use rear usb ports for such things. For laptops all have same power.
Every single time I try installing Windows Phone 7 on my HTC HD2 using DFT Windows Installer for HTC Leo [DWI100], I get an error saying the following..
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Please help. I need this to be installed asap, in a huge trouble.
read install tutorial from my signature...
compatibility issues
VishhSnoopy said:
Every single time I try installing Windows Phone 7 on my HTC HD2 using DFT Windows Installer for HTC Leo [DWI100], I get an error saying the following..
An error has occurred
Read below for more information
Error Description: send d000ff partition data failed
Info: .\RSPL\RSPL.cpp (1279)
Error Description: block send fail
Info: .\RSPL\RSPL.cpp (962)
Error Description: Block is after end.
Info: .\RSPL\RSPL.cpp (704)
Please help. I need this to be installed asap, in a huge trouble.
Click to expand...
Click to collapse
Seems like a compatibility issue. But windows automatically detects that and fixes it the next time u run the DWI. I had this same problem and it was compatibility. U can fix that manually by right clicking on DWI, go to properties, go to the compatibility tab, enable the option run this program in compatibility mode for *OS*, apply changes. Now run the installer again.