hi, i´ve a problem with the lockscreen, i´ll try to explain.. but sorry my english is not very good:
if i press the powerbutton without swipe to unlock the phone, only to watch at the clock, and then relock the phone with the powerbutton.
The Display goes off and the on again.... to make the display off, i´ll have to unlock it with swipe and then relock it using the powerbutton..
i´ve seen someone with the same problem while googleing.. but no solution
Please Help me!!
Wrong section, post in QA
ohh sorry :-/ thanks!!
please close this thread
Related
Hello,
I know, i am not the first one with this problem and i read many threads but i am not clearly understand the way (if there is a way) to fix my problem.
After updating my german xda Device i restarted and have been promped to enter my Pin, but the screen is frozen. So i did first a soft and after this a hard reset. Now after every hard reset i see the the O2-bubbles for some minutes and then the white screen with the blue bar on the top. Nothing is working.
I i wait for 10 or 20 Minuten the bubbles coming back - same game everytime.
I tried to enter the bootloader while holding the Power-Button while soft-resetting. BootLoader is seen, but shows a "gsm error".
I can not establish an active-sync-connection via USB-Cradle.
What can I do to rescue my XDA? Is there any possibility or can i put it to trash?
Any advice is very welcome!
Thanks!
Miwu
Dear all,
I am facing the same problem (XDA ROM update crashed) as miwu now . Can any expert teach me how to solve this problem by myself :?: or I need to let O2 engineer to fixing it :!: .
Thanks a lot !
Please HELP !
Dear all,
I can't get the white screen with the blue bar on the top because I am using 02 xda ver 4.00.11 (PPC2003), so that I can't use the repair.zip to fix it.
Any expert can to teach me how to fixing it by myself ?
Thanks !
Hi,
after half a night i fixed my described problem with the gsm-error in the bootloader.
I will post my solution in a new thread today in the afternoon.
Thanks to XDA-Developers for this great forum, its very helpful.
Thanks and regards from Berlin!
Miwu
Miwu,
That's great for you !
BTW, do you using PPC2003 as well ?
Hope to see your solution soon !
Thanks ! :wink:
Hello,
just posted my solution in a new thread
http://xda-developers.com/phpBB/viewtopic.php?t=2489
take a look there.
We first tried to fix it using 2003-SD-Flash but it become buggier, the pling-sound does not played, so we flashed back to PPC2002 and made it as described in the new thread!
Hope, you can flash CE with an PPC2002, maybe it helps, but I do not really know. Simply try or not!
Best regards from Berlin!
Miwu
I will try but I don't think it will work on mine because I am using bootloader v5.17 . Anyway, think for your help !
Best regards ! :lol:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Thank you!
Click to expand...
Click to collapse
We don't flame here. We just send the mob round to deliver a swift physical punishment.
Anyway, this was raised before under "flightmode" threads, here's one:
http://forum.xda-developers.com/showthread.php?t=279862&highlight=flightmode
Mike
Thank you! I will give them a try...
PS: don't be to rude!
mariner said:
Thank you! I will give them a try...
PS: don't be to rude!
Click to expand...
Click to collapse
We are here to serve
Mike
PS: Je ! grossier ! jamais, je suis un gentil type !
mariner said:
Hi guys...I'm about to loose my eyes searching trogh the forum for the answer to my question so please if this is a double thread don't flame me!!!
Here's the problem: I have a Tytn which doesn't load the phone module automatically at start.This means that I have to manually go to communication manager after boot is complete and start it...very annoying.
I wasn't able to identify a particular apps that disable or goes in conflict with the phone module after installing and I was wandering if there's a way to re-enable it without hard resetting the whole thing.
As I said I have a Tytn italian Rom and I didn't flash it yet...
Thank you!
Click to expand...
Click to collapse
Aha... I think I have found the problem...
Ms Voice Command v1.60 does it for me. As soon as I install it the phone won't start at boot up. Remove it and the problem is gone.
Wonder if everyone else with this problem has VC installed.
Hi folks !
I tried all the possible solutions offered here but none worked...sadly
I don't and I didn't have VC installed and I probably won't as it seems to be one possible guilty.
For me the only solution is hard reset at the moment...
Noe everything ( phone included ) works properly ( cross fingers )
but I fear next time I will try to install a new app...
If somebody gets news , please keep us updated!
C Ya
About one day ago, my friend tried to upgrade his wizard to wm6.
After flashing the device wont turo on! When he tried to power the wizard on, nothing hapens (NO LIGHT, NO SOUND, NOTHING.........)!
Please if someone know a way HOW to fix it, please HELP and HELP!!!
Thaks to all !!!!!!
_____________________
HTC Wizard
G4
ROM: TNT touch flo
i think its the battery ty to get a fully loaded batteri and then try again
it aint so easy to brick your phone at least i cant do it once i tryd but nothing
hi
please i have the same Problem ,i rty whith the battery
but nothing happened (sorry fot my english i'french )
PLEASE HELP MEEEEEEEEE
Search for the "jump-start battery" method on these boards.
If that doesn't work, you probably have a new paperweight.
...also, try to search the boards before asking a question. Often, the answers have already been given. You too, Frenchie.
I have a O2 Xda mini. It had german ROM on it, in order to change the language to english i upgraded the ROM but it did not work, so i downgraded it. Due to this the phone failed to boot up. Now whenever i try to switch it on the screen just blinks and the phone does not start. I need help, please somebody help me!!!!
Did you read the HEY Y'all fill youre signature thread...
biosky said:
I have a O2 Xda mini. It had german ROM on it, in order to change the language to english i upgraded the ROM but it did not work, so i downgraded it. Due to this the phone failed to boot up. Now whenever i try to switch it on the screen just blinks and the phone does not start. I need help, please somebody help me!!!!
Click to expand...
Click to collapse
And then ask please we need more info.
Hey Guyz.....
Recently i got a problem with my HD2.... sometimes when i pressed the back key the touch system doesn't work properly...But the phone doesn't stuck... other keys are working... when i locked the keypad and after unlock it , the touch is working properly...
I thought that something wrong with my android version... so I checked it after move to another android rom.... but problem is still there..
Can you guys help me to fix this..????
Thank You
hasitha77 said:
Hey Guyz.....
Recently i got a problem with my HD2.... sometimes when i pressed the back key the touch system doesn't work properly...But the phone doesn't stuck... other keys are working... when i locked the keypad and after unlock it , the touch is working properly...
I thought that something wrong with my android version... so I checked it after move to another android rom.... but problem is still there..
Can you guys help me to fix this..????
Thank You
Click to expand...
Click to collapse
any body please help me...??