Related
Hi ,, all
Do you can Help me ?
My GalY is not Work , Flashing the ROM Jelly Blast ?
I Following step by step the tutorial in the Page Official and all step the result is bootloop
step by step from me ?
- The First me Flash the Stock Rom from ODIN .
- after that I Flash The JellyBlast Rom via CWM
- i'm wait wait wait 10 minute and the result is BOOTLoop
please someone user can Help me ?
my Gal Y is BootLoop and I want Installed the JBRom .
Sorry for I Can't English
You need to do a full data wipe and cache wipe before flashing the rom. Please read the instructions carefully.
||I'm just a PM away for help||
I have tried over and over again ..
Sorry For English ..
NearLighting said:
I have tried over and over again ..
Sorry For English ..
Click to expand...
Click to collapse
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
FYI, rooting isn't necessarily required for flashing roms. All custom roms so far are pre-rooted.
||I'm just a PM away for help||
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
Use Root or Deodex ROM ? DEODEX include the Root .. ?
hitme987 said:
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
Click to expand...
Click to collapse
Stock Recovery ? why not CWM ?
Sorry Bad English .
try wipe data/reset, wipe cache partition, in advanced mode wipe dalvik cache, then flash jellyblast
Sent from my GT-S5360
After flashing stock rom u should root ur phone nd den flash any rom
U can install creeds 3.5 on ur phone without root
Its d only rom which u can install without root
Sent from my GT-S5360 using xda premium
No it nlot. I installed hype gm without root!!
Sent from my GT-S5360 using xda app-developers app
NearLighting said:
Use Root or Deodex ROM ? DEODEX include the Root .. ?
Stock Recovery ? why not CWM ?
Sorry Bad English .
Click to expand...
Click to collapse
Root your phone. If already rooted, proceed to the next step.
Make sure that you're on Stock kernel.
If your'e NOT on Stock kernel, either flash stock kernel, or open the JELLYBLASTV3.signed.zip on your pc, delete boot.img from it, and then flash the zip. In that way, you'll be able to use ANY kernel you already have.
Switch off your phone.
Go to Clockwork mode. This is important, because CWM is necessary, or you won't be able to boot up with the new Kernel.
Use the volume keys to move up and down.
Wipe data and cache
Now choose: Install zip from sd card.
Choose JELLYBLAST V3.signed.zip
Choose "yes"
It will be Installed. Now reboot your phone. First boot will take time. Be patient.
If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.
Please wait until media scanning is completed.
Enjoy!!!
hello all
sorry if I make a full forum.
I wanted to ask.
I just installed this rom http://forum.xda-developers.com/showthread.php?t=2027351 but stuck in samsung galaxy y logo.
where is my mistake.?
thanks in advance
use CWM instead of stock,, wipe data,cache,dalvik,
mount system and data,,
intall rom, after finished,, wipe again the data/cache,,
reboot
Where you on stock ? Did you do the wipes ? Did not mount system before flasing ?
Well if your answer is no to any of the above questions then you got your problem solved
clearly,god is a democrat!
bosox01 said:
hello all
sorry if I make a full forum.
I wanted to ask.
I just installed this rom http://forum.xda-developers.com/showthread.php?t=2027351 but stuck in samsung galaxy y logo.
where is my mistake.?
thanks in advance
Click to expand...
Click to collapse
Flash stock rom via odin and try again installing rom in cwm
Search cwm galaxy y if you dont have cwm
cwm is Clock Work Mod
bosox01 said:
hello all
sorry if I make a full forum.
I wanted to ask.
I just installed this rom http://forum.xda-developers.com/showthread.php?t=2027351 but stuck in samsung galaxy y logo.
where is my mistake.?
thanks in advance
Click to expand...
Click to collapse
Well my successful way of flashing is wipe data and system in CWM and after flashing wipe data again..
You won't get the problem again
Hello,
I tried multiple times to install a ROM with ClockWordMod Recovery on a rooted Samsung Galaxy Y with stock kernel & rom.
Even when I reflash the stock rom with Odin and try everything what people suggest on the internet, it doesn't work.
I get the next error when I try to install a ROM like JellyBlast or some other ROM's: Installation aborted(bad).
What can I do to fix this ?
And also it isn't possible to flash ClockWordMod Recovery for permanent, need to flash it over and over when I restart recovery.
If this problem is with multiple roms, you need to probably try another zip file of CWM. If this is for one particular rom, download the rom zip again; you must not have downloaded it fully.
Sent from my GT-S5360 using xda premium
there are some roms which install only via recovery not cwm..
nd if u want permanent cwm try to install a kernel with cwm like savie's kernel..
**rooting is new for me...and i am noob to root...**
This happened because ur downloaded ROM file is bad. Do a redownliading or unzip it with zipper then zip it again. Then it will be ok. Last time i had a problam like this
Sent from my GT-S5360 using xda premium
Most probably corrupted files
clearly,god is a democrat!
Thank you all for the fast responses and I tried also different roms and I have a second problem too with unzipping the roms.
When I try to unzip all of the roms that I tried, It gives an error that I can't unzip it, and I tried 4 times to download again and again the ZIP, but nothing works.
Do you guys have an idea of a kernel with permanent CWM and an ICS rom for Galaxy Y that works by installing it with CWM ?
So yes, could you please send me the XDA-thread if possible ?
@menewtoroot: Could you send me the correct topic of that Kernel with working download links and can you also confirm that this will work for a permanent CWM ?
Thank you all again, I will wait for you
Firstly :
Problem if you fail to flash, try to check the flashable zip file, maybe Bad file/corrupt file
Second :
if you want to have permanent CWM on your phone, i recommend you to try using Savie kernel
it so fast and more performance and have Permanent CWM
Dr.oidbio said:
Firstly :
Problem if you fail to flash, try to check the flashable zip file, maybe Bad file/corrupt file
Second :
if you want to have permanent CWM on your phone, i recommend you to try using Savie kernel
it so fast and more performance and have Permanent CWM
Click to expand...
Click to collapse
If you really want your phone to work fast and default CWM.
I suggest you use Merruk kernel.
Fast and bug free.
If I helped maybe you would consider hitting thanks button.
Sent from my GT-S5360 using xda app-developers app
prashantj95 said:
If you really want your phone to work fast and default CWM.
I suggest you use Merruk kernel.
Fast and bug free.
If I helped maybe you would consider hitting thanks button.
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Yup, some people isn't same think but all kernel it good
but, in some case some people again hehe it's hard to install merruk
Turkdale said:
Thank you all for the fast responses and I tried also different roms and I have a second problem too with unzipping the roms.
When I try to unzip all of the roms that I tried, It gives an error that I can't unzip it, and I tried 4 times to download again and again the ZIP, but nothing works.
Do you guys have an idea of a kernel with permanent CWM and an ICS rom for Galaxy Y that works by installing it with CWM ?
So yes, could you please send me the XDA-thread if possible ?
@menewtoroot: Could you send me the correct topic of that Kernel with working download links and can you also confirm that this will work for a permanent CWM ?
Thank you all again, I will wait for you
Click to expand...
Click to collapse
I dont come on xda via laptop so it will be difficult for me..
Bt i will try me best to help u..
Till then use the search function..
Just type savie's kernel for galaxy y..
U.will surely get it..
**rooting is new for me...and i am noob to root...**
Thank you guys for all the information. I will look for it and try it if it works.
I will keep you guys updated
And ofcourse I will hit the thanks button if you helped me
Hello guys,
I did try everything like it does need to be working, but it doesn't work.
First time I tried, the ROM booted but everything crashed so I started over again:
Wiped everything
Flashed Stock rom with Odin
Flashed the Jellyblast rom
Flashed CWM with Merruk kernel
Tried to boot and stuck at boot screen
Tried this for several times, even without flashing Merruk's kernel it doesn't work.
Can you please provide me a short SELF-MADE tutorial with the easy steps to do what and FLASH what?
With the files included please ?
Thank you all!
Turkdale said:
Hello guys,
I did try everything like it does need to be working, but it doesn't work.
First time I tried, the ROM booted but everything crashed so I started over again:
Wiped everything
Flashed Stock rom with Odin
Flashed the Jellyblast rom
Flashed CWM with Merruk kernel
Tried to boot and stuck at boot screen
Tried this for several times, even without flashing Merruk's kernel it doesn't work.
Can you please provide me a short SELF-MADE tutorial with the easy steps to do what and FLASH what?
With the files included please ?
Thank you all!
Click to expand...
Click to collapse
I dont knw...
I didnt try jelly blast by now..
Bt follow these steps..
Flash stock via odin..
Turn on ur phone..
Then switch it off again..
Now go to cwm nd mount system data...
Now clear data nd cache..
Nd dalvik cache in advanced menu..
Now follow the instructions given in jellyblast rom thread...
.
If still stuck in a boot loop...
Then reboot to recovery..
Try to clear data..cache nd dalvik cache again..
Nd remove battery stats too..
Now reboot..
This will help..
** rooting is new for me,
nd i am a noob to root....**
Good Morning for xda peoples
im a newbie here.. i have some question please help me with this thing...
this day i finally decided to use this " ►►[AOSP] 4.3 - S4 Google Edition - v6 - Feel the Experience of Nexus◄◄ " on my Samsung galaxy s4..
the question is...
i already do his step explanation Flashing:
1. Disabled your Sim-Pin
2. Boot to your recovery
3. Wipe data and cache
4. Install the zip
until the 4th step.. its failed.. theres some kind of red notification in the instalation. " E: signature ... failed " if im not wrong... and i tryied to use ROM manager to instal it...
and why i cant find any zip on it..?
how to flashing my s4 if theres a problem like this?
please help me with some intsruction.. i am really a newbie here... i hope u guys can lend me a help ^_^.. thanks before for reading this and replying to help me
What file did you try to flash if you can't find the rom you (hopefully) downloaded? Do you know witch recovery you are using?
Sent from my GT-I9505 using xda premium
Preciousillusion said:
Do you know witch recovery you are using?
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
thanks for the fast responed for u...
i guess i was using ROM manager apk if im not wrong mention it...theres instal ROM from SD card option... when i put the Zip on it wipe and clean.. theres a option to reboot on sistem recovery...
is like Android system recovery (3e) theres no option for installing or anything
-reboot system now
=apply update from ADB
-aply update from exxternal storage
-wipe cehck partition
-aply update from cache...
i guess thats all... am i entering wrong recovery mode?sorry for if im too noob at this
ZachariasErsa said:
i guess thats all... am i entering wrong recovery mode?sorry for if im too noob at this
Click to expand...
Click to collapse
I think Before you can flash a rom with rom manager, you will need a custom recovery.
there are a couple to chose from :
TWRP
CWM
CWM Philz Touch
The creator from the google rom rom wich you want to flash gave no specific one, so you can pick one and all three should work. i'm using philz touch at the moment.
The custom recovery must be flashed from pc with odin, if you never used odin before, you need to install usb drivers / or 'kies' first.
If you never used Odin, then make sure you read a little first on how to use it, it's simple but can give bootloops or worse if not used well.
Since you have to flash this recovery you might as well flash it from there? it's easier i think and has more options then rom manager.
turn off phone -> press volume up - menu button - power button at the same time wich will open custom recovery and from there follow the guidelines from the google edition v6 topic on how to flash it.
-> Inside the custom recovery there is an option for backup, i suggest if this is your first custom rom tryout, that you make a backup in that custom recovery before trying, like that you can't do much wrong while testing
i guess i made it ... thanks for anyone who trying to help me..
now running JB4.3 thanks before
-> owyess, those custom recoverys are for i9505, if you have an i9500 or other device, DON't flash these but get your own version at the 'original android development' threads from your device
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
mjobanjatt said:
I have googled but cannot find any. Plz give a link(for gts 5360)
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Varun hellboy said:
Here is it.... :good:
JUST PRESS THANKS IF I HELPED...
Click to expand...
Click to collapse
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
because it is a temporary cwm so you should flash it again and again for use
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
There are two types of cwm
Temporary - for users of stock kernel or custom kernel that uses stock recovery
Permanent - cwm is built into the custom kernel & replaces stock recovery
if you want a permanent cwm flash a kernel with permanent cwm (see the kernel features in it's thread)
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
Flash any kernel that has integrated cwm to have cwm permanently .....
mjobanjatt said:
The installation was successful and it boots into CWM but next time I boot into recovery and there was stock recovery. I reinstalled CWM and same thing happens
Sent from my GT-S5660 using xda app-developers app
Click to expand...
Click to collapse
try hells fusion.... best kernel for SGY....
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Kobro said:
Hasn't ANYONE come up with a permanent cwm for our cute little y?!
Click to expand...
Click to collapse
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
marcussmith2626 said:
there has been a permanent cwm for galaxy y for years!!
there are two types of cwm
1 - tempory cwm zip
flash this in stock recovery to get to cwm - needs to be flashed each time you want to enter cwm
2 - permanent cwm
flash a custom kernel with cwm built in - this replaces stock recovery
If you want a permanent cwm just flash a kernel that has cwm built it!
Click to expand...
Click to collapse
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Kobro said:
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
Then get another phone that has that function.
Remember, our phones are not godly, not everything-can-do phones. They are only bottom-range phones. Hardware and software limitations cause this issue. If you want to fix it, do it yourself.
But if you want to contradict yourself and say "I wanna stick to my little Y" then flash a kernel.
Which is essentially in a zip.
And then you get permanent CWM.
Problem solved.
Kobro said:
thats exactly what i meant! the first option is hardly permanent, especially if you accidentally delete the .zip.
and what if someone doesn't want to flash kernels?
other phones have a .zip that you flash once and have cwm permanently. that's what i meant by a permanent cwm!
Click to expand...
Click to collapse
other phones work in a different way - for example HTC phones have fastboot and a recovery totally different from a samsung galaxy y 5360
the only way in this phone to replace the recovery perminantly is to flash a kernel that has it
GT-S5360b Problems with rom /cwm
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Guh18 said:
Hello guys, I was trying to install the rom PureKat 3.0 (also tried the 1.0 and the 1.5 update extreme) in Galaxy Y GT-S5360b with cwm v5.0.2.6, but got the following message
'' E: Can not open / sdcrd/PureKat1.0.zip
(bad)
Installation aborted. ''
Please, Would anyone help me solve this, I have already given wipe data / reset, wipe cache partition, went into mounts and storage and wipe gave to all options and let it all assembled, but received the same message.
attachments below
. www . dropbox . com /s / yjemrraamenyd1x / CAM00302 . jpg
i'm new herre,so , sorry for write the link with space .
Click to expand...
Click to collapse
Your download was incomplete.Re-download the whole ROM again without any data interruption.
samsung galaxy y
hi guys i want to bring back my original samsung galaxy y os. please give me the link to flash it back. thanks