A500 bricked . FIXED - Acer Iconia A500

Just wanted to share how i unbricked my A500 .
I bought an A500 that was stuck on android boothoping i could fix it .
Vol+/Power gave me an " unrecoverable bootloader error (0x19000008)"
Vol-/Power tried to boot from recovery but after a few seconds got the dead android with red triangle
tried various flash mode with device recognised as "acer picasso boot recovery device" to no avail ,
with A500 connected to pc in boot loop windows(7 x64) was looking for "MTP" driver which it could never find , DESPITE me having installed AND reinstalled usb drivers numerous times AND trying to manually force which driver windows used .
i even tried putting various stock roms on an sd card to try and force an update . No joy .
i had also left device in bootloop overnight hoping something would kick in , again to no avail . the only thing that did appear to help was blackthund3r's " ICS Root 7.1.1. " which got rid of my "unrecoverable bootloader error (0x19000008)" though i still could not flash an update from sdcard
So i decided to see what would happen if i booted up my other (working but never previously connected to pc)A500 , which the pc immediately recognised as "Acer Iconia Tab A500 "
and installed drivers .
THIS IS THE WEIRD BIT
as soon as i disconected the WORKING A500 from usb and connected the A500 which was still doing its boot loop , Windows suddenly recognise it as "Acer Iconia Tab A500 " and the Tab's screen almost immediately lit up with the Android welcome/setup screen !
i have no idea the number of other "fixes " i had tried (from here and other sites but it worked for me)
Yes i was lucky to have another A500 handy but if someone else is having boot problems , and has never connected their A500 to pc before they had problems this may work for them if they know someone else with a working one .

Nice, I have an A500 that is stuck in a bootloop, I will try to do some of these things to bring her back around, Thanks.

brysie said:
i decided to see what would happen if i booted up my other (working but never previously connected to pc)A500 , which the pc immediately recognised as "Acer Iconia Tab A500 "
and installed drivers .
THIS IS THE WEIRD BIT
as soon as i disconected the WORKING A500 from usb and connected the A500 which was still doing its boot loop , Windows suddenly recognise it as "Acer Iconia Tab A500 " and the Tab's screen almost immediately lit up with the Android welcome/setup screen !
i have no idea the number of other "fixes " i had tried (from here and other sites but it worked for me)
Yes i was lucky to have another A500 handy but if someone else is having boot problems , and has never connected their A500 to pc before they had problems this may work for them if they know someone else with a working one .
Click to expand...
Click to collapse
So you can only get PC to install drivers if you have a working tablet? Not available to download anywhere? So given this situation, do you know any method that could help someone with only one, broken, a500.
I have a stock, unrooted tablet that gets stuck on boot on the acer logo. It started happening after the battery died and I charged and tried to boot.

Related

[Q] Can't connect to PC with my A500

Finally i got myself a acer iconia a500 yesterday.
Rooting, flashing a CWM-Recovery and flashing the latest Taboonay rom was no problem so far.
But somehow I can't manage to connect my Tablet to my PC. I have been searching and trying for hours - without any solution.
I installed the official Acer driver, tried different usb ports & different cables.
I am running Windows 7 32 bit.
The tablet is recognized, but windows is failing finding the right drivers for MTP-USB device. Even pointing to the installed acer drivers doesn't help.
The device is shown as "Acer Tablet" in "Devices & Printer" but with an exclamation mark, leading me to the mentioned driver
Actually I am running out of ideas now
any idea or help is appreciated
ditto
-bump-
Same issues here :S
Ever since Taboonay I haven't been able to get anything to work. not even the stock Rom. :S
Actually i solved this problem in the meantime, by connecting with another Computer. Same OS - worked right away.
Guess, I had some kind of driver issues...

[Q] Stuck on FireFireFire logo slightly diffrent problem

So after reading and trying how others on here fixed that very same problem I deiced its time to make a post and ask for help because those other methods did not work.
Ok I did something stupid and I went ahead and did a factory reset to my kindle. Yes I know it was a complete noob thing to do and I should have known better seeing that I have rooted and flashed ROMs on all my other android devices and never once did something that dumb but I did it this time. Now I do have a back up made and had it safely stored on my PC.
Problem is that I can't get into recovery it stuck on the FFF logo and holding down the button only brings it back up. When the device restarts windows recognizes it as an unknown usb device and won't connect and Adb also wont recognize the device or show that it is connected. So now I need to ask someone who is more knowledgeable then me on what to do next. Any help will be appreciated
Ok update: Was able to solve my own problem using the Kindle fire utility and by uninstalling the drive for the kindle through the device manager, then using the drive install_drivers.bat in the KFU folder to reinstall the drivers. I next unplugged my kindle from the pc, turned it off by holding the button on the kindle in and then restarted it with the usb plugged into the pc. My Pc recognized my kindle and I was then able to use KFUs Bootmode menu and once in there used option 1. to boot it in normal mode. Hope this helps anyone who was stuck like I was. My memory of which adb commands to use was a bit rusty but using the KFU helped with that part.

Please Help! TF101 bricked; USB dead

Please help me with my TF101.
My TF now is bricked and the USB does not get recognize on any computer (1 PC, 2 laptops, 12 different ports). Only if I can have a USB connection, i can try to flash the TF. I installed CWM 5.8.3.4 and it killed my tablet. I was trying to make backup before installing CM9. Now, it is stuck on CWM recovery loop, freezes on cold boot, and I dont even know if APX mode is working for my tablet. Before I rooted the tablet, I was running ICS and was already having hard time getting the tablet get detected by my PC. After trying different ports, i was able to root with 1-Click Transformer Root. Installed OTA Root Keeper, SuperUser, then CWM. And now it is dead.
I have try drivers but there's no point, it does not get detected Nothing under device manager says APX device or TF101. Try Android SDK, ADB, NvFlash (tried to get in APX mode no sign of detection), but no point, computer can't detect it.
I am really clueless what to try anymore....Please any suggestions is greatly appreciated.
What happens exactly when you boot with power + vol down, and with power + vol up ?
(your tablet fully charged)
Bricked tf101
I have been scoping, reading many topics about bricked tf's couldn't find the answer yet.
Looks like it's all skattered all over this forum, mayby a bricked section would be wise.
So i bricked mine to and i have been at it for 2 weeks now, trying everything i could read here, wondering weither i should start (yet again) a topic, my own topic, concerning the bricked status of my tf....
sherlock1 said:
I have been scoping, reading many topics about bricked tf's couldn't find the answer yet.
Looks like it's all skattered all over this forum, mayby a bricked section would be wise.
So i bricked mine to and i have been at it for 2 weeks now, trying everything i could read here, wondering weither i should start (yet again) a topic, my own topic, concerning the bricked status of my tf....
Click to expand...
Click to collapse
I am also in the same boat, if nothing else any information on fixing the usb, is it the port, is it cables, software etc...

Lost USB connection using Afterota

Am I stuck in APX mode with no USB connectivity and how do I get out of this? Here is what happened:
A500 with OTA Android Build: Acer_AV041_A500_1.033.00_PA_CUS1
Windows 7x64 with UAC turned off and restarted OS
- Launch Afterota v1.09
- Info tab > Install Driver ... "ACER ICONIA 3G DRIVER INSTALL"
- Boot A500 > ENABLE USB debugging
- Plug USB cable into A500 ... "Acer Iconia Tab A500 ... Your device is ready to use"
- Tablet Information ...
Tablet Serial : 11933073415
Tablet Cpuid : 028841854280E4D7
Tablet Sbk : 0x15290000 0x7FC6C006 0x47E52404 0x302C2103
Android Build : Acer_AV041_A500_1.033.00_PA_CUS1
Bootloader : 0.03.12-ICS
- Save Values to AcerIDs.txt
- Standard tab > Bootloader Ics v3.14.8 + Recovery Thor v1.7.3 > For A50X
- Install sys rw patched kernel (sys rw patch only, no overclocking)?
- Yes > OK
- A500 boots to APX Mode
- Afterota status ... flashing (about 1 minute) ... idle (no further activity ... ever)
A500 screen is BLACK, Power LED is ON, all the Afterota buttons are grayed out except for Unsoftbrick Browse.
Driver: OK - driver installed
Usb: ERROR - connect usb cable and enable usb debugging
I've tried reinstalling the USB driver multiple times and using different USB ports with no luck. I can turn A500 on and off by holding down the Power LED button for 3 seconds, but still a black screen.
Any ideas will be appreciated
May have a possible Fix for you
EDIT: OK May have a possible Fix for you I've just run this myself from apxmode and it worked for me...give it a whirl and see how you go!!!
check this thread here
##############################################################
the 'mode' yr tab is in now - black screen with power lite....
i'm sure its waiting for the apx driver to load this will enable yr tab to enter the next stage where the flash takes place..(this stage is called different things depending on which tool u use...which doesn't help matters at all...) you will know when u enter "the next stage" because yr tab will display some white text "a500 apx mode" or "acer download mode" even "a500 bootloader mode" they're all the same -
so if u do not have the white text displayed the only conclusion one can come to is that the required driver cannot be found....(if I'm wrong on this then please put your 2cents worth in and maybe we can get this problem solved once and for all)
you need to have the "acer usb-boot recovery driver" displayed in your system tray under safely remove h/w or in device manager. Is it there....?
Device manager is yr friend always have it open when trying to troubleshoot flash issues.
connect yr tab to yr pc with yr mini usb data cable - the flash will definietly not happen if you're using a regular sized usb cab le!!!!
is the driver listed under usb controllers?
is there an "APX Device" listed?
if not disconnect and power yr tab off
then enter apx mode manually and reconnect cable and see if the boot-recovery driver installs itself - if it doesn't then reinstall the acer drivers....again!
also if it hangs on the black screen again
always disconnect yr usb cable close the program down and try again.
your other choice is to use civs nvFlash cos it requires yr tab to be in apx mode first - if it fails it will show you an error which will help
There seems to be alot of ppl of late getting stuck in this mode...and there seems to be no real solution to it.....sometimes you just have to keep at it until it works... if all else fails then u may need to downgrade back to HC and try from there!!!
Please let us know how u get on....
cheers
EDIT you need the android drivers too - theres a zip file in my cpuid thread if u need them
I've tried your suggestions, only using AfterOTA so far ... still no success.
These are the steps I've been following:
1) Disable UAC > Restart
2) Run Afterota.exe
3) AfterOTA (Info tab): Install Driver
4) Power on A500 (screen is still black, Power LED is white) ... plug in micro-USB cable from PC ... "driver successfully installed"
5) AfterOTA (Advanced tab): Unsoftbrick ... browse to ... recovery_thor17_403.img
6) AfterOTA (Advanced tab): Unsoftbrick ... browse to ... ics_boot_unlk_V6_500.bin
7) AfterOTA (Advanced tab): Unsoftbrick ... Install
[1/3]loading apx mode bootloader
[2/3]flashing recovery ..
This is where it gets stuck. No vibrating, the screen remains black (no text), nothing even after 5 minutes. I've repeated steps 5-7 trying two different USB cables plugged into the A500 micro-USB (small) port and also connected to different USB ports on my PC. Each time I shut down AfterOTA, unplugged the USB cable, powered off A500 ... then try again. I've also tried uninstalling and reinstalling the USB driver using AfterOTA.
Every time A500 is powered on and connected to USB ...
- "Acer USB Boot-recovery driver" is listed in Device Manager, USB controllers
- "APX" is listed as an Unspecified device in Devices and Printers (not in Device Manager)
- "Usb: ERROR - connect usb cable and enable usb debugging" listed in AfterOTA (Info tab)
It appears AfterOTA can't establish communication over the USB connection.
The very first time I used AfterOTA, A500 was still able to boot to ICS, the USB connection was OK and I was able to retrieve the Acer IDs and save them to a txt file. It was only after flashing "Bootloader Ics v3.14.8 + Recovery Thor v1.7.3" that I got the "Black" screen. It appeared the flashing was successful, as it had completed step [5/5] and then showed status "idle .."
I guess first priority is to find a something (maybe other than AfterOTA) to see if it can communicate with A500. Haven't tried civs nvFlash ... yet.
Thanks for your help.
FCBelser said:
Every time A500 is powered on and connected to USB ...
- "Acer USB Boot-recovery driver" is listed in Device Manager, USB controllers
- "APX" is listed as an Unspecified device in Devices and Printers (not in Device Manager)
Click to expand...
Click to collapse
ok, this is weird:
you are saying device manager reports the boot-recovery driver installed
But there is also an unspecified APX device????
Are u using win7/64 by any chance as there have been some issues reported by those users - are u able to try another pc??
Try manually installing the driver the apx device, by pointing it to the acer folder in program data
what happens there??
- "Usb: ERROR - connect usb cable and enable usb debugging" listed in AfterOTA (Info tab)
It appears AfterOTA can't establish communication over the USB connection.
Click to expand...
Click to collapse
- while yr tab is in apx mode you will have no access to adb or usb b/c apx is using the USB connection -
I guess first priority is to find a something (maybe other than AfterOTA) to see if it can communicate with A500
Click to expand...
Click to collapse
Yeh I wish it were that easy - I've been working on this for a whole week now, as lately there have been a number of "stuck in apx mode" reports - altho yours is the first of it happening using afterOTA - there just doesnt seem to be an easy way out of it,,,its happened twice previously on my tab - i got it working but i cant tell you how....i just kept trying over and over till it worked!!!
If you do give nvFlash a try - edit the .bat file and delete the "cls" commands this will give you a chance to 'see' whats going on...
another tip: after entering your sbk make sure the "system information" window pops up - it will show amongst other things your "chip uid" this is yr cpuid - if you carry on without yr tab being in "bootloader mode" you can end up with a really, truly 'brick' on yr hands - see the walkthru in my sig if you need further guidance
[1/3]loading apx mode bootloader
[2/3]flashing recovery ..
Click to expand...
Click to collapse
once it completes "loading apx mode bootloader" this is when yr tab should vibrate and display the white text "acer a500 apx mode" which is what
leads me to believe that for some reason its waiting for the driver even when it seems to be installed already.....this is where i think the problem lay.
The only other tool that may work is timmydeans v4 it uses apx mode as well but will roll u back to HC, it also repartitions and 'resets' your tabs file system as alot of tabs have got stuck on "formatting partitions" with the flash...hopefully this won't happen to yours but you'll find out after running nvFlash tool...
apxFlash has never been able to pick up the fact my tab is in apx mode, it, like afterOTA relies on adb to gather the required tab info, and of course if it doesnt recognise your tab it doesnt know its connecteD!!! At least afterota recognises this by the fact the "unbrick" menus are not greyed out...
The only other thing i might suggest is putting yr tab in apx mode manually -
Turn tab off
use a paper clip to push and hold the reset button
then press and hold the power button UNTIL the power Lite comes on
count 3 secs and release
then after another second release the reset button
might seem strange thing to try, but you never know it may just 'jog' something into life
Yes ... I'm using Win7 64-bit.
When I plug the USB cable into the A500 ...
1) Acer USB Boot-recovery driver shows up in Device Manager ... listed under USB controllers
2) An APX icon shows up in Devices and Printers (not in Device Manager) ... it's listed under a category call "Unspecified"
When I unplug the USB cable, both 1) and 2) go away.
For manual driver install ... are you referring to:
C:\Program Files (x86)\Acer Inc\ACER ICONIA TAB3G\Win7\ADB\x64\android_usb.inf
-or-
C:\Program Files (x86)\Acer Inc\ACER ICONIA TAB3G\Win7\USB_ethernet_rndis\x64\acer_usb_ethernet_rndis.inf
-or- something else?
I have an older laptop running Win7 32-bit, so I'll also try that too.
FCBelser said:
Yes ... I'm using Win7 64-bit.
When I plug the USB cable into the A500 ...
1) Acer USB Boot-recovery driver shows up in Device Manager ... listed under USB controllers
2) An APX icon shows up in Devices and Printers (not in Device Manager) ... it's listed under a category call "Unspecified"
When I unplug the USB cable, both 1) and 2) go away.
For manual driver install ... are you referring to:
C:\Program Files (x86)\Acer Inc\ACER ICONIA TAB3G\Win7\ADB\x64\android_usb.inf
-or-
C:\Program Files (x86)\Acer Inc\ACER ICONIA TAB3G\Win7\USB_ethernet_rndis\x64\acer_usb_ethernet_rndis.inf
-or- something else?
I have an older laptop running Win7 32-bit, so I'll also try that too.
Click to expand...
Click to collapse
something else, lol hold on....i'll just go check
I tried the paper clip / power button trick ... and then back to AfterOTA on Win7x64 ... no luck. I also tried AfterOTA on my laptop (Win7 32-bit) ... exact same problem.
ok this is where things get even weirder...and from memory it was a real pain to get this apx device installed....windows kept wanting an inf file but i'm positive that in the end i got it to install from a folder - i just cant remember how????
I cancelled the hardware wizard from doing its thing
then in the next window there are 2 options
let windows choose or let me choose - something like that
i kept trying let me choose and got nowhere
then i think i tried "search my computer" and chose the C drive - i'm sure it found the right ones that way
and i think i uninstalled all acer and android drivers, rebooted and reinstalled them before i could get any joy....i know it took a good 5-6 hours of mucking about - until finally something worked...
and yes def give 32 bit a go before we get too carried away!!!
oh no... i think i've jsut got stuck in apx mode...
---------- Post added at 08:41 AM ---------- Previous post was at 08:17 AM ----------
FCBelser said:
I tried the paper clip / power button trick ... and then back to AfterOTA on Win7x64 ... no luck. I also tried AfterOTA on my laptop (Win7 32-bit) ... exact same problem.
Click to expand...
Click to collapse
then the only other thing to do is a rollback using timmydeansv4. run the tool without yr cable connected and wait for the instructions to put yr tab into manual apx mode - you wont have to worry bout that seeing as you're in it already!!! connect yr cable and click OK - enter cpuid and wait 10mins for it to do its thing...it won't take any longer than this -
let us know how you go!! and good luck m8
Where can I find timmydeansv4? Google search isn't finding it.
Thanks
FCBelser said:
I tried the paper clip / power button trick ... and then back to AfterOTA on Win7x64 ... no luck. I also tried AfterOTA on my laptop (Win7 32-bit) ... exact same problem.
Click to expand...
Click to collapse
i renamed the Acer Folder in Program Files
I then put my tab in manual apx
when the driver went to install
i cancelled "skip searching windows update"
in usb controllers an acer picasso boot recovery is listed
AND in Printers and Hardware the APX device is there - i didnt do anything with it at all
I fired up afterOTA but it couldnt see my tab
So I used civs V8 nvflash pckg
tab went into the proper apx mode with the txt displayed
it flashed and now running v8 and cwm 1.7.3
I did this via HC 3.1 win7 32
That worked !!!
I followed your The Chickens Guide to Flashing the bootloader manually after installing the USB driver from the Acer support website. Now I'm back to ICS without having lost any of my data or settings.
A couple of noob questions:
1) Would an ota update from Acer wipe out the newly installed V8 bootloader & Thor 1.7.3 recovery?
2) What's the most reliable way to root ICS?
Thanks so much for your patience with my problem!
FCBelser said:
That worked !!!
I followed your The Chickens Guide to Flashing the bootloader manually after installing the USB driver from the Acer support website. Now I'm back to ICS without having lost any of my data or settings.
A couple of noob questions:
1) Would an ota update from Acer wipe out the newly installed V8 bootloader & Thor 1.7.3 recovery?
2) What's the most reliable way to root ICS?
Thanks so much for your patience with my problem!
Click to expand...
Click to collapse
Oh m8 thats made my day:laugh::laugh::laugh::laugh: rapt for u!!!
So u think it was the drivers??
1) don't know, we haven't recd an ota to find out - but in my experience nothing wipes unless u do! An EUU may do it or an official updaate.zip.
2) icsroot by blackthund3r google it
3) if u install a custom rom you will need to do a full wipe and format via cwm b4 and after flashing this includes Jr internal storage else all sorts of glitches happen.
Your welcome., as I said its been a problem with no real solution, awesome to know it that in the end it finally worked
I'm not sure it is the drivers. I installed Acer USB Driver v1.00.0524 (2011-10-06) from the Acer website. It appears to be the same version installed by AfterOTA. Maybe it's something else in AfterOTA that just gets hung up on a combination of hardware and software that wasn't anticipated? I'm sure gersma couldn't anticipate or check out every combination.
I'll try ICS Root.
Thanks again for all the help.
FCBelser said:
Where can I find timmydeansv4? Google search isn't finding it.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1307539
i have exactly the same problem, issue is that wen ur in APX mode and win7 has detected ur acer recovery driver and when u start your process of ICS rooting OR apxflashing or bootloading whatever the USB driver disconnects and that's the reason why nothing works and its stuck in partiton format or what ever process your in btwn and when you once again in a hurry power off the device and power u the acer recovery driver, its back there but still its stuck nothing goes on... Also even when acer recovery driver is there and you enter any mode then it says device not connected or found...please help
rondlu said:
i have exactly the same problem, issue is that wen ur in APX mode and win7 has detected ur acer recovery driver and when u start your process of ICS rooting OR apxflashing or bootloading whatever the USB driver disconnects and that's the reason why nothing works and its stuck in partiton format or what ever process your in btwn and when you once again in a hurry power off the device and power u the acer recovery driver, its back there but still its stuck nothing goes on... Also even when acer recovery driver is there and you enter any mode then it says device not connected or found...please help
Click to expand...
Click to collapse
If the usb connection is disconnecting here's a few things you can check.
Both sets of drivers are installed. The Acer ones and the android ones.
Try a different usb cable.
Win 64 bit has issues try xp, ,vista or win 7 machine.
If still no joy try civs manual flash or Ubuntu.
Sounds like a driver issue so check those first.
Dibb
Sent from my GT-I9300 using Tapatalk 4 Beta
Thanks so much for the reply the drive i have is Acer USB boot recovery drive and before that Picasso was visible .. there is just one driver how can i get two drives here? i have read many forum and the links they gaved is Just one two drivers, one was Picasso and the other was simple that i mentioned at first but the Device Manager just shows one (Acer USB boot recovery drive)
Three cables are changed but all it happens that it stuck at partition fomating or flashing recovery
Also like to mention that i Used AFTEROTA which shows the status under
Driver - OK - driver installed
USB - ERROR connect usb cable and enable usb debugging
(how can usb debugging be enabled when tablet is totally dead)
In the cpuid guide in my sig there's a download for adb/fast boot drivers. You must have these installed.
Was yr tab running ok before all this?
Sent from my GT-I9300 using Tapatalk 4 Beta
Sorry but i m new to this android and this forum ,i have followed ur link and im confused that which version (honeycomb or ICs was my tab) yes everything was working fine and suddenly the OS and apps started to held and behave abnormal so then i had to turn it off and after that all this happened
I have followed ur link and this is what i see
DRIVERS
Acer Support for Acer APX/Fastboot/Recovery Drivers
Android SDK for the adb/USB drivers - You can d/l a mini zip containing just the adb and fastboot drivers attached to this post "adb_fast.zip"
i went to ace support and download the honeycomb first version but the adb_fast.zip doesn't have any driver its a program... Kindly suggest where is the other driver
Sir Kindly reply i am waiting for your suggestion.:crying:

Computer cant recognize Acer A500 ????? NEED HELP!!!!

Ok so I figured this is my MAIN problem not being able to flash my Acer A500 and not being able to put a custom bootloader and recovery on it. My computer all together cant recognize my Acer ONLY when its in APX mode! My Acer IS ROOTED as well. My computer will recognize it normaly when its on and plugged i and i can transfer files and what not bewteen my computer and the Acer. But once I put it in APX mode thats when things go down hill! My computer installed a driver called "Acer Bootloader-Recovery" driver the first time i put it in APX mode. But still wont seem to recognize it! BUT!! I can go into my "Devices and Printers" and their it shows i have an "APX" device connected and its under "Unspificed" devices. So no matter WHAT program I use to flash it or install a custom recovery/bootloader, it can NEVER find my Acer! Even when i try to do an EUU to fully wipe the thing back to HC it STILL wont recognize my Tablet!!!! Its SO FRUSTRATING.... since to do anything with my tablet it needs to be in APX mode....I have ALL drivers installed. I got em off the website and downloaded the "HC 3.0.2" drivers (since they dont have any drivers for my ICS 4.0.3v).... So can anyone help me on this? Ive tried almost EVERYTHING i can in the book to get this thing to flash and recognize my Acer, but just wont.....heres ALL my tablet info if this helps at all:
Tablet Serial : 12713752215
Tablet Cpuid : 037C61C9408103D7
Tablet Sbk : 0xE4531F00 0x18070000 0xF74EE402 0x11DE2003
Android Build : Acer_AV041_A500_1.033.00_PA_CUS1
Bootloader : 0.03.12-ICS
Not even the Babsector.rar file will recognize it! If anyone could help in anyway possible please do so! Im at my last resort and i really cant think of anything else to do to it....

Categories

Resources