I have to restore a full flash but my phone doesn't mount in pink screen. I flashed zip what is on "Get back your pink screen" -topic. Now I have access to pink screen but it won't mount internal storage. And also I can't get access to pink screen without SD-card.
PS. I've tried to mount phone with XP, W7 and Ubuntu.
That means there is a dload folder and files in your internal memory. Can you check that?
Sent from my U8800
entrapmen said:
That means there is a dload folder and files in your internal memory. Can you check that?
Sent from my U8800
Click to expand...
Click to collapse
Yes, there is dload folder with update.app file in it. I can't do anything to internal memory. Example, I delete dload folder succesfully with ES, reboot and dload folder is still there.
Is there any way to delete files from internal storage? I can delete files with ES but after reboot, files always remain in internal storage.
Raineruf said:
Yes, there is dload folder with update.app file in it. I can't do anything to internal memory. Example, I delete dload folder succesfully with ES, reboot and dload folder is still there.
Click to expand...
Click to collapse
Try to rename dload folder or the .app file.
Sent from my U8800
Mahdial said:
Try to rename dload folder or the .app file.
Sent from my U8800
Click to expand...
Click to collapse
I can't do any changes to internal memory trough phone or ADB.
Is there any kind of flashable zip out what would fix/unlock internal memory? I think it's somehow magically locked.
booting is damaged
after pink screen i connect it on ubuntu 12.04 , but in dmesg the device is not showing as a block device(storage device).
problem: at the time of presssing (power on &vol+&-) button not installing the official firmware 2.3.5 present in the sd card(\dload\update.app).
its goes to the pink screen. normally it should install the official firmware(present in the sdcard) while pressing (power on and vol+&-) button.
present condition:
my ideos x5 u8800 can only enter in:
1. blue screen (default power on)
2. pink screen (power,vol+,vol-)
past condition:
1.i had upgraded it to official 2.3.5 firmware from 2.2 using (copy dload folder to sdcard and powering on with vol+&- button)
2. rooted with superoneclick
3. replaced .cust_backup/image/recovery.img with recovery.img (cwm5.0.2.7), by remount and es file explorer
4.now started with cwm 5.0.2.7 to install custom rom
5. i wiped cache, system, dalvik cache, after that formatted /boot , /system,/cache,/data
6. i think after upgrade to 2.3.5 , the computer not detects as a storage device in pink screen mode
is there any tool(windows or linux) to
1.to flash firmware from computer or
2.to detect internal storage (for replacing /.cust_backup/boot.img and recovery.img)
sorry for bad english
plz help me
Raineruf said:
Is there any kind of flashable zip out what would fix/unlock internal memory? I think it's somehow magically locked.
Click to expand...
Click to collapse
So, you uptaded or downgraded your phone with dload in internal sd card right? And now you cant delete that delete folder to access pink screen in order to change recovery.img , is that it? Maybe you can simply root your phone (if it isnt already rooted) and use root explorer to manually change the recovery file. It should work...
bhaweshintouch said:
after pink screen i connect it on ubuntu 12.04 , but in dmesg the device is not showing as a block device(storage device).
problem: at the time of presssing (power on &vol+&-) button not installing the official firmware 2.3.5 present in the sd card(\dload\update.app).
its goes to the pink screen. normally it should install the official firmware(present in the sdcard) while pressing (power on and vol+&-) button.
present condition:
my ideos x5 u8800 can only enter in:
1. blue screen (default power on)
2. pink screen (power,vol+,vol-)
past condition:
1.i had upgraded it to official 2.3.5 firmware from 2.2 using (copy dload folder to sdcard and powering on with vol+&- button)
2. rooted with superoneclick
3. replaced .cust_backup/image/recovery.img with recovery.img (cwm5.0.2.7), by remount and es file explorer
4.now started with cwm 5.0.2.7 to install custom rom
5. i wiped cache, system, dalvik cache, after that formatted /boot , /system,/cache,/data
6. i think after upgrade to 2.3.5 , the computer not detects as a storage device in pink screen mode
is there any tool(windows or linux) to
1.to flash firmware from computer or
2.to detect internal storage (for replacing /.cust_backup/boot.img and recovery.img)
sorry for bad english
plz help me
Click to expand...
Click to collapse
You formatted things you shouldn't. Try to upgrade again. Put dload folder to sdacard and power with vol + - and power button. It should work.
HI, I have similar issue and can not see the phones storage at all in pink or blue screen, the computer is asking me install drivers for the 'device' when i connect it via usb, but i could find no drivers and suspect drivers wont help at this stage. I flashed and copied dload (official gingerbread) to the external sd card via another phone, reinserted to my phone and vol -+ the phone and the update started to take effect but stopped halfway through 2/2 install. There must be a way to boot/ bring the phone back to life from the external sd card , currently it seems the external sd card is the only way i can get into the phone, can anyone help me with this?
I got same problem. Phone boots only Huawei logo, but installation is successfull and phone can't be mounted on pink screen because it's not showing up to my computer (using Ubuntu). What they will say in repair service if the phone is in this condition?
problem solved
I have exactly the same problem with you, but I've managed to solve the problem. things I did the first time that ...
1. I remove my sdcard and reformat to FAT32
2. I make dload folder where there ROM from huaweidevice.com/ru/downloadCenter.do?method=toDownloadFile&flay=software&softid=Mzk2NTY=
3. then I attach my phone back to the sdcard
4. I press the power button and vol (top and bottom) and the results come back as early
I tried it in honnor huawei U8860
sorry for my english
bhaweshintouch said:
after pink screen i connect it on ubuntu 12.04 , but in dmesg the device is not showing as a block device(storage device).
problem: at the time of presssing (power on &vol+&-) button not installing the official firmware 2.3.5 present in the sd card(\dload\update.app).
its goes to the pink screen. normally it should install the official firmware(present in the sdcard) while pressing (power on and vol+&-) button.
present condition:
my ideos x5 u8800 can only enter in:
1. blue screen (default power on)
2. pink screen (power,vol+,vol-)
past condition:
1.i had upgraded it to official 2.3.5 firmware from 2.2 using (copy dload folder to sdcard and powering on with vol+&- button)
2. rooted with superoneclick
3. replaced .cust_backup/image/recovery.img with recovery.img (cwm5.0.2.7), by remount and es file explorer
4.now started with cwm 5.0.2.7 to install custom rom
5. i wiped cache, system, dalvik cache, after that formatted /boot , /system,/cache,/data
6. i think after upgrade to 2.3.5 , the computer not detects as a storage device in pink screen mode
is there any tool(windows or linux) to
1.to flash firmware from computer or
2.to detect internal storage (for replacing /.cust_backup/boot.img and recovery.img)
sorry for bad english
plz help me
Click to expand...
Click to collapse
problem solved
I have exactly the same problem with you, but I've managed to solve the problem. things I did the first time that ...
1. I remove my sdcard and reformat to FAT32
2. I make dload folder where there ROM from huaweidevice.com/ru/downloadCenter.do?method=toDownloadFile&flay=softw are&softid=Mzk2NTY=
3. then I attach my phone back to the sdcard
4. I press the power button and vol (top and bottom) and the results come back as early
I tried it in honnor huawei U8860
sorry for my english
fearless88 said:
problem solved
I have exactly the same problem with you, but I've managed to solve the problem. things I did the first time that ...
1. I remove my sdcard and reformat to FAT32
2. I make dload folder where there ROM from huaweidevice.com/ru/downloadCenter.do?method=toDownloadFile&flay=softw are&softid=Mzk2NTY=
3. then I attach my phone back to the sdcard
4. I press the power button and vol (top and bottom) and the results come back as early
I tried it in honnor huawei U8860
sorry for my english
Click to expand...
Click to collapse
I also have this problem since b528 update
Spitwista said:
I also have this problem since b528 update
Click to expand...
Click to collapse
this solution didn't work on huawei ascend g510-0200 .
Related
Hey, today I acquired an IDEOS X5.
I have checked out a few things and wondering.
Could anyone make it clear for me within this...
http://forum.xda-developers.com/showpost.php?p=13083454&postcount=1
"Ensure that there are no Huawei rom updates on your SD-Card in the dload folder and unplug the phone from your computer"
Where is this dload folder?
Next thing that seems unclear...
"Connect the phone to your computer. In windows it will automatically mount one mass storage device which corresponds to the /cust_backup folder on your phone. If your OS supports EXT3 it will mount multiple devices, look for the one with an images directory and this is the device to use."
Will I get a drive called /cust_backup or something?
Next sup, my phone is using B133, bought it from Teknikmagasinet.se. I noticed the sound isn't the best and camera has strange colors at time by time, plus when I call my voice sound disorted. Recoding sound doesn't sound bad.
So I wanted to try out this rom.
http://forum.xda-developers.com/showthread.php?t=1059753
The thing is how do I install and will it damage anything if done correctly?
By seeing the installation guide I am guessing you would have to take the update option, not the install from zip option. Will it be a conflict with my swedish rom as it uses swedish and such things.
I really hope anyone would kindly help me !
Thanks in advance !
You wont have a "dload" folder on your sd-card unless you actually put one there.
Before flashing anything, visit this page and grab a copy of the correct rom so you have a backup of the original - in your case I believe it to be the sweden expert rom (has the swedish in it). http://wiki.modaco.com/index.php/Huawei_Firmware_U8800
Then put that on your SD-card in a folder called "original rom".
If things go pear shaped during flashing an alternate rom, just rename the folder to "dload" and you can then go into bootloader (both volume keys and power) and it will flash back to original, as if you had just taken the phone out of the box.
To get started first download the above rom and put it on your sd card as i stated.
Then download this recovery replacement: http://forum.xda-developers.com/showthread.php?t=1067490
Next, making sure you have no dload folder on the sd card (keep the backup as "original rom", put the phone into bootloader mode (purple screen).
connect it to the computer, and the cust_backup drive will show up. Rename the recovery image in that drive to recovery.bak, and copy the image recovery image downloaded to the drive. Now you have CWM installed.
From here you can try the BM160 rom by copying it and a bootloader to your sd card and using "install zip from sdcard" in clockwork recovery.
To get to clockwork recovery, turn the phone off, and press power + up volume.
hope this helps.
dash8brj said:
You wont have a "dload" folder on your sd-card unless you actually put one there.
Before flashing anything, visit this page and grab a copy of the correct rom so you have a backup of the original - in your case I believe it to be the sweden expert rom (has the swedish in it). http://wiki.modaco.com/index.php/Huawei_Firmware_U8800
Then put that on your SD-card in a folder called "original rom".
If things go pear shaped during flashing an alternate rom, just rename the folder to "dload" and you can then go into bootloader (both volume keys and power) and it will flash back to original, as if you had just taken the phone out of the box.
To get started first download the above rom and put it on your sd card as i stated.
Then download this recovery replacement: http://forum.xda-developers.com/showthread.php?t=1067490
Next, making sure you have no dload folder on the sd card (keep the backup as "original rom", put the phone into bootloader mode (purple screen).
connect it to the computer, and the cust_backup drive will show up. Rename the recovery image in that drive to recovery.bak, and copy the image recovery image downloaded to the drive. Now you have CWM installed.
From here you can try the BM160 rom by copying it and a bootloader to your sd card and using "install zip from sdcard" in clockwork recovery.
To get to clockwork recovery, turn the phone off, and press power + up volume.
hope this helps.
Click to expand...
Click to collapse
Thanks for the reply !
Glad to see someone giving their time to respond
I try to install the gingerbread on my Ideos x5 pro because I recently received "The blue screen of death" on it. It occured when i installed a 2.5.7 rom ontop of stock 2.2.2 firmware and couldnt boot. I then went into CWM and deleted cache, Dalvik etc and deleted to much obviously...
The problem is that I tried everything but when I hold the volume UP, volume DOWN and power, It will only go to pink screen and not "upgrade" screen ...
I have dload folder on my SDCard but it still does not work, I could install the first update.app but not the others Please help me!
Regards
Did you format your sdcard before putting dload in it?
Sent from my U8800 using Tapatalk 2
Yeah, i formated it into fat32 format before i put dload folder into it and i dont have any other file on it
Take battery out and boot with USB connected.
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz said:
Take battery out and boot with USB connected.
Sent from my U8800 using Tapatalk 2
Click to expand...
Click to collapse
Didnt work, still pink screen I pressed volym UP + volym DOWN and while holding it in i connected the USB, still nothing. Those it matter if the USB is connected the PC or the charger?
Tried with the USB connected to both charger and PC, still didnt work
Downloaded 2.2.2 official update but still got the problem that it only shows the pink screen. I cant understand why i could install step1 of the upgrade but not step2 I need to get this phone back to life guys, i only had it for a week
Update: Okay i searched around the internet and found out that if the phone cant find the sdcard it goes into pink screen and the solution is to put "dload" folder inside of the INTERNAL sdcard. Anyone got a way of doing this with my current problem? when i connect the ideos to the PC with the usb it only goes into blue screen and the "image" folder comes up exactly like i boot into pink screen :s
if ur issue is still alive, try 512mb card, instead of 1gb or more.
In my case it works. To upgrade stock from sd.
Update: Okay, i returned the phone to the company i bought it from and it ended with a new phone and 50% cheaper price ;D
They sayed it was a connector to the screen that broke lols xD
Help me please!
Fillingen90 said:
Update: Okay, i returned the phone to the company i bought it from and it ended with a new phone and 50% cheaper price ;D
They sayed it was a connector to the screen that broke lols xD
Click to expand...
Click to collapse
I have the same not-upgrade problem
I tried with the Official B512 and the official B521
With B512, I managed to do the first step.
Then, I copied the new UPDATE.APP from step with, (I did not delete the log file).
NOTE: I Just copied that file. Should I rename it to update_g.app?
I went into pink screen, no update.
I formated the card, tried again nothing.
I copied the dload folder in the internal SD, nothing.
Restored defaults (unfortunately).
I tried the B521 update.app nothing.
Generally, I cannot upgrade and I am furious with myself because I lost all my personal data and the customizations because the backup did not stored data (for example, where on earth is the Lama files stored?)
s91066 said:
I have the same not-upgrade problem
I tried with the Official B512 and the official B521
With B512, I managed to do the first step.
Then, I copied the new UPDATE.APP from step with, (I did not delete the log file).
NOTE: I Just copied that file. Should I rename it to update_g.app?
I went into pink screen, no update.
I formated the card, tried again nothing.
I copied the dload folder in the internal SD, nothing.
Restored defaults (unfortunately).
I tried the B521 update.app nothing.
Generally, I cannot upgrade and I am furious with myself because I lost all my personal data and the customizations because the backup did not stored data (for example, where on earth is the Lama files stored?)
Click to expand...
Click to collapse
I managed to found the English PDF and thus, to apply the correct procedure, which is to:
Create a dload directory in your SD card (it's not important if it is the internal or the external. If you use the internal card, make sure that NO external card is installed.
Insert the update.app file from Step 1
Rename the update.app from Step 2 to update_g.app and copy it to the dload folder of your SD card
Update the phone.
It cant mount sd card, i cant format sd card and now i have blue screen error. By mistake i deleted everything I made a file image and put amss.mbn
boot.img
EMMCBOOT.MBN
recovery.img
to in it but still cant oopen phone What will i do?
Dear all i am very sad, i was using 2.3.5 official update on u8800 x5, then i tried to update 4.0, after installing that was not loading anything and got hang on startup,
then i tried to downgrade to 2.3 official cwm 5 was installed and i format everything, including boot etc, now it only shows blue screen. i can also go to pink screen, but as i connect to pc, it doesnt show and folder or drive so that i can copy dload or image files.
cannot access recovery mod or any type of drive during pink screen. how to solve my problem.
Note that i cannot access any drive or directory of device when connected to pc in pink screen,
no way to copy any type of data in fone no recovery mod also:crying:
First,download this;(Thanks to Blefish for MediaFire link)
http://www.mediafire.com/download.php?lws54xxb3lcm7di
Copy the dload to your SD Card
Pull out the battery from phone and insert the sd card to phone
Connect the Phone to Computer while presssing + and - buttons (audio buttons). Battery must pulled out from phone.
Installation should be started.
:laugh:
forumber2 said:
First,download this;(Thanks to Blefish for MediaFire link)
http://www.mediafire.com/download.php?lws54xxb3lcm7di
Copy the dload to your SD Card
Pull out the battery from phone and insert the sd card to phone
Connect the Phone to Computer while presssing + and - buttons (audio buttons). Battery must pulled out from phone.
Installation should be started.
Click to expand...
Click to collapse
My dear i have no words to thank u.
Thanx soooooooooooooo much it worked
I f*cked up my u8800 pro...i tried to flash b928 original firmware throught internal sd...i tried step 1,ok...i tried to boot on recovery but nothing...i tried to enable it but got on bootloop...tried to flash step 2 throught external sd but it flashes the one from internal sd....if anyone has any kind of idea..please be my guest
Pink screen accesable?
-Rik[Rittik]
Try to flash without battery while pluged to power source. Any step 1/2
Sent from my U8800PRO using Tapatalk 2
driveroni21 said:
I f*cked up my u8800 pro...i tried to flash b928 original firmware throught internal sd...i tried step 1,ok...i tried to boot on recovery but nothing...i tried to enable it but got on bootloop...tried to flash step 2 throught external sd but it flashes the one from internal sd....if anyone has any kind of idea..please be my guest
Click to expand...
Click to collapse
From what firmware you was coming???? Please don't tell me you was coming from froyo.....
Inviato dal mio U8800Pro con Tapatalk 2
driveroni21 said:
I f*cked up my u8800 pro...i tried to flash b928 original firmware throught internal sd...i tried step 1,ok...i tried to boot on recovery but nothing...i tried to enable it but got on bootloop...tried to flash step 2 throught external sd but it flashes the one from internal sd....if anyone has any kind of idea..please be my guest
Click to expand...
Click to collapse
start again from step1
and use external sdcard only
and do everything without the battery (use the computer to power your phone)
Sent from my GT-i9500 using XDA-Developers app
I have a similar situation when trying to flash rom 1.6.8 pikachukaki
pink screen still works
CWM recovery not working
Can not flash rom from SD card
sorry for my English is not very good!
newbier02 said:
I have a similar situation when trying to flash rom 1.6.8 pikachukaki
pink screen still works
CWM recovery not working
Can not flash rom from SD card
sorry for my English is not very good!
Click to expand...
Click to collapse
restore all the files in "image" folder from stock ICS
Sent from my GT-i9500 using XDA-Developers app
prakharkmr27 said:
restore all the files in "image" folder from stock ICS
Sent from my GT-i9500 using XDA-Developers app
Click to expand...
Click to collapse
I've tried deleting all "image" folder on your computer from your PC, copy and paste the folder "image" of the stock 2.3 . But it still can not get into CWM, the only air link huawei logo, then stop there.
Can you guide me specifically not to CWM recovery? Thanks
newbier02 said:
I've tried deleting all "image" folder on your computer from your PC, copy and paste the folder "image" of the stock 2.3. But it still can not get into CWM, the only air link huawei logo, then stop there.
Click to expand...
Click to collapse
What you want to do??
Flash official firmware with "dload" folder.
Phone don't boot cause it has no rom to boot.
Sent from my U8800Pro using xda premium
gkalenis said:
What you want to do??
Flash official firmware with "dload" folder.
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
Yeah! I want I want it back to Flash official firmware with "dload" folder.
newbier02 said:
Yeah! I want I want it back to Flash official firmware with "dload" folder.
Click to expand...
Click to collapse
Follow the guide here .... http://forum.xda-developers.com/showthread.php?p=37953739
Just update thread , with stock ICS image folder , and by how to flash update from GB to ICS .
You can use battery or usb to flash update.
AND DO NOT EVER put the "dload" folder in your internal sd , ONLY in micro sd card , ( you cannot do that in your situation , just for others).
Sent from my U8800Pro using xda premium
You are still not answered to my question.....is very important, belive me.....
Inviato dal mio U8800Pro con Tapatalk 2
still not be. I can not flash from the SD card. when pressing the power button + volum + & - it just shows up pink screen and stop there rather than place the flash from sd card;
I tried to replace the whole image of internal card in turn from the Froyo -> GB -> ICS (of you), but still can not do it.
newbier02 said:
still not be. I can not flash from the SD card. when pressing the power button + volum + & - it just shows up pink screen and stop there rather than place the flash from sd card;
I tried to replace the whole image of internal card in turn from the Froyo -> GB -> ICS (of you), but still can not do it.
Click to expand...
Click to collapse
Put dload folder on sd , and use the usb cable not battery .
Do not press any button , just put dload folder and then connect usb cable .
Use GB image folder.
Sent from my U8800Pro using xda premium
gkalenis said:
Put dload folder on sd , and use the usb cable not battery .
Do not press any button , just put dload folder and then connect usb cable .
Use GB image folder.
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
I have done the following steps:
1. the pink screen -> connect to PC.
2. internal drive format -> copy the folder "stock2.3image" (which has been renamed the "image") on the internal drive.
3. disconnect the USB cable -> computer power off
4. inserted SD card has been formatted and copy dload folder (inside the folder containing the file and UPDATE_g.APP UPDATE.APP) on the machine.
5. connected to the PC by USB cable.
6. machine boot sequence, Huawei logo appears, then it just repeats the same (reboot).
newbier02 said:
I have done the following steps:
1. the pink screen -> connect to PC.
2. internal drive format -> copy the folder "stock2.3image" (which has been renamed the "image") on the internal drive.
3. disconnect the USB cable -> computer power off
4. inserted SD card has been formatted and copy dload folder (inside the folder containing the file and UPDATE_g.APP UPDATE.APP) on the machine.
5. connected to the PC by USB cable.
6. machine boot sequence, Huawei logo appears, then it just repeats the same (reboot).
Click to expand...
Click to collapse
No, put only ,step2 , UPDATE.APP , without rename it , and connect usb , without press anything.
If nothing happens, do the same by pressing the 3 buttons (vol+ vol- power) , until vibration and leave them.
Sent from my U8800Pro using xda premium
gkalenis said:
No, put only ,step2 , UPDATE.APP , without rename it , and connect usb , without press anything.
If nothing happens, do the same by pressing the 3 buttons (vol+ vol- power) , until vibration and leave them.
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
I did the same. when connected with USB cable, the machine starts automatically (up logo) then power off and silent. When I pulled the cable out and reconnect with the press hold vol + vol - and power button, then it connects to the pink screen, and also on the internal card is not done flash process.
I ALSO HAVE THIS EXECT SAME PROBLEM......i m very SCARED :crying:
I DO THE FOLLOWING THINGS TO REGAINING A NEW LIFE TO MU PHONE
you can use b928 IMAGE FOLDER BACKUP ....AND PUT IT TO IMAGE FOLDER BY PRESSING VOLUME +,VOLUME-, AND POWER BUTTON...
AND THEN COPY STEP 2 dload FOLDER TO FAT32 FORMATTED SD CARD AND BY PRESSING 3 BUTTON COMBINATIONS IT HAVE BEEN INSTALL ..............
newbier02 said:
I did the same. when connected with USB cable, the machine starts automatically (up logo) then power off and silent. When I pulled the cable out and reconnect with the press hold vol + vol - and power button, then it connects to the pink screen, and also on the internal card is not done flash process.
Click to expand...
Click to collapse
Try the same , with GB image folder and now flash ICS official steps , not GB.
Sent from my U8800Pro using xda premium
yeah! I will try to reinstall Win and try again step by step. If successful I will tell you. Thanks!
Ok so I got the bluescreen after doing a moronic thing and formatting the boot.img. I can boot into the pink screen by holding both the volume buttons and turning on, I get the bluescreen with just any other way of turning it on.
I am on Windows 8 and I had a hard time getting the drivers to install for the Huawei 8800-51 for rooting but I managed to root through a method called "poot" and it worked. this was some time ago so forgive me if I don't supply the source of that root method, Google provided it when i searched it.
Now back to the problem, When i plug in my phone I get about a dozen or so usb popups in "my computer". I was just looking to see what files I need to use and where to place them.
I have read all over about "dload" folder and placing the "steps" in it but I cant get access to my formatted sd card when I plug it into the computer.
Is there something I'm not understanding? Can I copy the basis of a rom (system folder, boot.im etc...) into the main 1gb portion of the 12 usb sections that appear and boot?
If I could get into CWM ill be fine its just getting that far. any help would be gladly appreciated.
Again I have tried the previous methods of the Dload folder but I cant get my SD card to be recognized from my phone when plugged int.
cheers, and sorry if this is in the wrong section or if its been posted, I cant find anything relating to windows 8 side of things and cant get the driver installed so I feel a bit lost.
Huawei U8800-51 At&t
JLloydMedia said:
Ok so I got the bluescreen after doing a moronic thing and formatting the boot.img. I can boot into the pink screen by holding both the volume buttons and turning on, I get the bluescreen with just any other way of turning it on.
I am on Windows 8 and I had a hard time getting the drivers to install for the Huawei 8800-51 for rooting but I managed to root through a method called "poot" and it worked. this was some time ago so forgive me if I don't supply the source of that root method, Google provided it when i searched it.
Now back to the problem, When i plug in my phone I get about a dozen or so usb popups in "my computer". I was just looking to see what files I need to use and where to place them.
I have read all over about "dload" folder and placing the "steps" in it but I cant get access to my formatted sd card when I plug it into the computer.
Is there something I'm not understanding? Can I copy the basis of a rom (system folder, boot.im etc...) into the main 1gb portion of the 12 usb sections that appear and boot?
If I could get into CWM ill be fine its just getting that far. any help would be gladly appreciated.
Again I have tried the previous methods of the Dload folder but I cant get my SD card to be recognized from my phone when plugged int.
cheers, and sorry if this is in the wrong section or if its been posted, I cant find anything relating to windows 8 side of things and cant get the driver installed so I feel a bit lost.
Huawei U8800-51 At&t
Click to expand...
Click to collapse
When you place the dload folder onto an sd card and back into your phone, plug it into your computer while holding both volume buttons but NOT the power button.
I kept holding the power too and it would'nt go into update mode. maybe it was the bad English I was reading from others but it never mentioned it.
maybe this may help you
format your sd card. after that put in DLOAD (froyo dload that means 2.2) dont use 2.3 dload. and install with press 2 volume key and power button. that what i did before. settle the problem:good:
yusopa said:
format your sd card. after that put in DLOAD (froyo dload that means 2.2) dont use 2.3 dload. and install with press 2 volume key and power button. that what i did before. settle the problem:good:
Click to expand...
Click to collapse
No. He has -51...
You need to flash 2.3 stock.
Place 2.3 dload in that folder
Or restore the .cust_img
Sent from my SGH-T769 using Tapatalk 4
You can boot into the pink screen, right?
Just connect it to your computer in the pink screen mode and replace the boot.img file with a proper boot.img file.
I guess that should work.
Sent from my U8800 using xda app-developers app
Try replacing the boot image.
Somcom3X said:
No. He has -51...
You need to flash 2.3 stock.
Place 2.3 dload in that folder
Or restore the .cust_img
Sent from my SGH-T769 using Tapatalk 4
Click to expand...
Click to collapse
That my idea to save my phone before. But sorry if that idea cant help. But my ideos still live till now with my method
Sent from my GT-I9205 using xda app-developers app
After install 2.2 you still upgrade right.
Try this if you can access the Bootloader.
Bluescreen usually wipes the Bootloader, but you can fix that if you can still access it...
In case you lost all the data in Bootloader (pink screen), format the partition with FAT32, create a folder called "image" and copy the following files on there.
EMMCBOOT - http://www.mediafire.com/?lb6ifvgk72iru4a
AMSS.MBN - http://www.mediafire.com/?d6r45q6p5gew59v
Recovery.img - http://www.mediafire.com/?57njygc8oianjac
Boot.img - http://www.mediafire.com/?6d5i0714a7o9z97
If you can't access the Bootloader (pink screen), I'm afraid it's going back to warranty.
Sent from my U8800 using xda app-developers.
oled
try find someone with windows 7 and just replace img
hope that helpd