Well I installed the latest nightly by Quarx.... with froyo kernel (As i have MB525 Red Lense). I am facing couple of issues:
1. Proximity Sensor issue.... as soon as i receive or dial any number the screen goes blank and will only come up once the other hangs up the call
2. Cannot change sensor values in Settings --> Display ....it always throws an error stationg " unfortunately settings has stopped"
I tried even flashing Froyo via RSD and and all from start but the issue is still there for me...
1. maybe this will help: http://forum.xda-developers.com/showthread.php?p=18620513
2. Try this: http://forum.xda-developers.com/showthread.php?p=34961509
Sent from my MB526 using xda app-developers app
What do you mean with froyo kernel?.... CM 10 doesn't need any kernel as they r already included in the rom. just flash the rom n gapps
Sent from my MB526 using xda premium
Related
Every day i have to restart my phone so i can call again...
when i dial the number and click send... the call ends immediately and tells that it was a 4 second call... and I cant make a call until a restart the phone...
i have a defy with the latest nightly from quarx cm7 mod
same problem buddy!! 111102 nightly...but I have this problem since I had cm7 (rco,rc1,rc1,5)
I get this too sometimes, and its so annoing when you need to make a fast call and i have to do a batt pull
Sent from my Defy CM7 using Tapatalk.
Anyone knows how to solve this?
?
Sent from my GT-I9100 using xda premium
Maybe the cm7 devs can, quarks eppy, maniac, what do you think?
Sent from my Defy CM7 using Tapatalk.
There is a FAQ thread in the sticky for fixing 3g. Your guys issue is related to the baseband switcher. Check it out
Sent from my MB525 using XDA App
drwario said:
There is a FAQ thread in the sticky for fixing 3g. Your guys issue is related to the baseband switcher. Check it out
Sent from my MB525 using XDA App
Click to expand...
Click to collapse
Well i dont think so ... in the beginning of the 3g thread it says
Note: this guide covers Android 2.1 (Eclair)
Click to expand...
Click to collapse
i have the same problem in CM7, the last night i flash de MIUI-1.12.2 and this day y restar 1 time.
Dont recive sms and phone call too
Do you have the recommended SBF in base ? If not do so and then let us know...
Can someone give me an advice?
I have a defy+ with bl7 and since I have flashed the 11.10 build I noticed that my phone acts weird:
1. the phone signal shows full, data is on(H-symbol) but the signal icon it's not blue and I cannot receive calls. Trying to turn on/off data nothing happens. Turn on/off airplane does nothing. Only if I reset the phone I can receive calls.
2. Flashing stock Rom or 2nd init builds solves this problem but appear another(random reboots)
3. In 2nd boot builds the battery drain is very high even with the latest build. Only when I change the file libril.... from Walter MSGINGER the battery drain its normal but the issue with the phone still on.
This is happening to me 2-4 times / day
So the advice I ask is that
It's a hardware problem or is a software problem?
Sent from my MB526 using xda app-developers app
cyrusct82 said:
Can someone give me an advice?
I have a defy+ with bl7 and since I have flashed the 11.10 build I noticed that my phone acts weird:
1. the phone signal shows full, data is on(H-symbol) but the signal icon it's not blue and I cannot receive calls. Trying to turn on/off data nothing happens. Turn on/off airplane does nothing. Only if I reset the phone I can receive calls.
2. Flashing stock Rom or 2nd init builds solves this problem but appear another(random reboots)
3. In 2nd boot builds the battery drain is very high even with the latest build. Only when I change the file libril.... from Walter MSGINGER the battery drain its normal but the issue with the phone still on.
This is happening to me 2-4 times / day
So the advice I ask is that
It's a hardware problem or is a software problem?
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
Same thing happened with me so I installed sbf Nordic and then cm9 and now using cm10 which is working awesome without any problem
Sent from my MB526 using Tapatalk HD
$iddy said:
Same thing happened with me so I installed sbf Nordic and then cm9 and now using cm10 which is working awesome without any problem
Sent from my MB526 using Tapatalk HD
Click to expand...
Click to collapse
What Nordic sbf?
and is bl7 rooted?
Sent from my MB526 using xda app-developers app
cyrusct82 said:
What Nordic sbf?
and is bl7 rooted?
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I flashed froyo because I got green lens and I rooted it with super one click then installed 2init recovery installer v2.0 then flashed cm9 epsy. Version and froyo kernel after that installed cm10 18 build update 3 and now 4th it is working awesome
Sent from my MB526 using Tapatalk HD
Hey guys..
I'm facing this problem.. After flashing CRAZY RABBIT 1.8 and wiping my battery stats, my Defy no longer enters deep sleep (some times).screen keep on after locking it, screen turn on automatically and off itself.. turn on and off keep doing this, which is making by battery last a lot less.
I've never had problems like this, because I was on MIUI Pikachu Edition...
I have search for hat but not success.
Any tips how to solve it? Thanks!
It could be a rogue app running in the background, since I am not aware of any whiterabbit issue like this
Sent from my MB526 using xda premium
thekguy said:
It could be a rogue app running in the background, since I am not aware of any whiterabbit issue like this
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
back on MIUI Pikachu but having same problem, screen turning on and off automatically after few minutes. Any suggestions?
You must flash full; sbf (Official Froyo Mb525, Gb Mb526) ,your problem should be corrected.
Don't worry will be good: Good:
Try flashing a Rom without restoring apps. If there is no problem then restore your apps carefully to check which one is causing the problem
If you have a problem even with a clean flash.. well that shouldn't happen
Sent from my MB526 using xda premium
Hey. When I try to install any MIUI rom on my normal U8800, it tells me to enter Pin-code. When I do, it says that android.process.com or something failed.
Aurora and CM7 and other roms work fine.
What can I do?
You have to turn off the pin code.
Sent from my U8800 using xda app-developers app
Guys i have problems with JB SISTER.
I dont know why, but i can not post in defy developer.... then i'll post here.
Thread JB SISTER: http://forum.xda-developers.com/showthread.php?t=2192807
My problems with this version: frequent LAG, freeze when i open any app. The only way for restart android is remove the battery. Ah yes! the boot takes too long to start. Too long!!
Well, i had before this version Quarx version (4.1.1), and i only wiped data and flashed above it.
Then i think: I'll back to stock rom.
Following instructions, i back to retail stock android, because i did not want more problems. After this, i flashed the JB SISTER.
This time, freeze are less frequent but, when i open two or more apps, the system freeze fully, then i remove battery and it all starts again. The problem of boot takes too long continues.
I wonder if anything succeed solve this problem.
Anyway, i think of changing this version totally unstable.
Thanks so much.
nope bro i oo did tat wipe and made it proper which made me not to install fursquare and lots many apps ... which says ur not allowed to install itseems ...yukkk ..remaining everything is awe and faster not a single lag for me MB526 motorola defy + JB sister
bootmenu-cpu settings-scroll down-set to default (should be 3rd option from the bottom)
see if this helps?
Sent from my MB526 using xda premium
i did a clean install from cm9
i m having no problems like that
only one bug i m facing is
that
whenever i open stock gallery in any photo editor
the fone gets stuck
so i m using quick pic now
p.s.
if u touched any settings in performance menu
change it to default
Sent from my MB526 using xda premium
hackergnome said:
bootmenu-cpu settings-scroll down-set to default (should be 3rd option from the bottom)
see if this helps?
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Sorry guy, but not solve for me.
Rawwr said:
i did a clean install from cm9
i m having no problems like that
only one bug i m facing is
that
whenever i open stock gallery in any photo editor
the fone gets stuck
so i m using quick pic now
p.s.
if u touched any settings in performance menu
change it to default
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
before this i had cm10, then i tried flash stock rom then after i flashed again the sister, but the system ever is strange.
ok guys, ty for help me. I think i will reflash another rom, quarx version.....
brunocasado said:
Sorry guy, but not solve for me.
before this i had cm10, then i tried flash stock rom then after i flashed again the sister, but the system ever is strange.
ok guys, ty for help me. I think i will reflash another rom, quarx version.....
Click to expand...
Click to collapse
or as the dev said
come from stable 2.3 rom
why dont u install it over wiui rom ?
Sent from my MB526 using xda premium
Rawwr said:
or as the dev said
come from stable 2.3 rom
why dont u install it over wiui rom ?
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
AFAIK base rom doesn't do anything in terms of performance!
Sent from my MB526 using xda premium
hackergnome said:
AFAIK base rom doesn't do anything in terms of performance!
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
u can check over there
he did mentioned it
Rawwr said:
u can check over there
he did mentioned it
Click to expand...
Click to collapse
where? the base rom doesn't matter because you wipe everything anyways, and because of 2nd-boot you don't use Motorola kernel either!
Sent from my MB526 using xda premium
it's happened to me too. after official froyo i installed that rom and all the phone became sluggish, every app i tried freeze so i had to flash another rom
hackergnome said:
where? the base rom doesn't matter because you wipe everything anyways, and because of 2nd-boot you don't use Motorola kernel either!
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
go and read that post
Sent from my MB526 using xda premium
Some issues i faces in Sister Jelly Bean ROM
I am on the latest build... 3.1.7
I have come from a WiUi rom...
I am not able to access the USB storage of the device.
Whenever I play a song the music has a bad image in the notification bar ( attached pic)
Kindly help.
AkonDefy+ said:
I am on the latest build... 3.1.7
I have come from a WiUi rom...
I am not able to access the USB storage of the device.
Whenever I play a song the music has a bad image in the notification bar ( attached pic)
Kindly help.
Click to expand...
Click to collapse
Change the rom
Flash xperia d 4.2 with minimal installation
Sent from my MB526 using xda premium
I screwed up... i deleted /system and rebooted..
Now i am stuck in Moto Logo and RSD Lite is not detecting my phone as well.
I have the drivers installed and yet nothing happens.
What should i do?
Sorry for asking such n00b questions.
hay
I was facing the same problem when i first found this thread. Then i just went to performance option in settings and checked . I found that cpu governance was set to interactive. I changed that to ondemand and my problem got solved.
Hope this helps you.