Related
My problem:
No reaktion if i connect with usb.
I had n new device with update 4.0.3 official..
asus sync on P: foun no device.
adb devices = nothing.
I had two cable and tried them both.
Also the transformer what to do when connected.
other devices works.
Maybe a driver?
Please give me a help.
Kind regards
gandalf
You need the driver
1234556789 said:
My problem:
No reaktion if i connect with usb.
I had n new device with update 4.0.3 official..
asus sync on P: foun no device.
adb devices = nothing.
I had two cable and tried them both.
Also the transformer what to do when connected.
other devices works.
Maybe a driver?
Please give me a help.
Kind regards
gandalf
Click to expand...
Click to collapse
ASUS_Android_USB_drivers_for_Windows.zip file is attached. Just download and install on your pc.
Hope it works!
no message here
tedr44 said:
ASUS_Android_USB_drivers_for_Windows.zip file is attached. Just download and install on your pc.Hope it works!
Click to expand...
Click to collapse
-I am sorry-no- I don´t know exact how to install , so i install the asus PC-suite before witch include the driver.
How can i prove if driver is install?
It is strange that there is no change if i plug in the device - or am i wrong.
- with other device -usb sticks for example it works
I tried another computer wihout drivers - no reaktion if i plug in.
Any idea?
kind regards
gandalf
I had the same issue with usb and flashed the update zip which remedied the problem at hand.
Vintage76 said:
I had the same issue with usb and flashed the update zip which remedied the problem at hand.
Click to expand...
Click to collapse
Do you have a link -and can i use it for DE version?
on the official side i only find the same i have:
Eee Pad Transformer TF101 Firmware: V9.2.1.11 Only for DE SKU (Android 4.0.3)
--edit : found it - using the update OTA in the transformer--
I really hope it works - The update works- but the same Problem........
kind regards
gandalf
Is your device rooted?
I fill find the link and post it.......
---------- Post added at 12:56 AM ---------- Previous post was at 12:49 AM ----------
Here you go, read through it carefully.. DE version is untested.
Must be rooted.....
http://forum.xda-developers.com/showthread.php?t=1334673
No, it is not rooted.
-And i had already update to newest official version by OTA- .but thanks
Kind regards
Gandalf
1234556789 said:
-I am sorry-no- I don´t know exact how to install , so i install the asus PC-suite before witch include the driver.
How can i prove if driver is install?
It is strange that there is no change if i plug in the device - or am i wrong.
- with other device -usb sticks for example it works
I tried another computer wihout drivers - no reaktion if i plug in.
Any idea?
kind regards
gandalf
Click to expand...
Click to collapse
So the device driver is already installed but still no connection, maybe you should turn on usb debugging, try this:
Go to Settings, Developer options and check USB debugging then connect your usb. If it doesn't work, then your ICS update may have caused the problem. You may have to restore your tablet to HC and recheck your usb connection before upgrading to iCS. Good luck!
Did you try this?
Under Settings/Storage there is a menu in the upper right corner.
Open it and then check MTP.
Click to expand...
Click to collapse
Nebucatnetzer said:
Did you try this?
Click to expand...
Click to collapse
Good info, I wonder if the ICS update disabled this setting? That would definitely cause the usb connection problem.
I know from the GNEX that it happens sometimes if you're flashing a custom ROM so I thought it might be the same case here.
I just updated to .17 today and I'm still having the same issue he is. I haven't tried installing the driver, but my TF101 doesn't connect...
I updated from the .zip here:
http://forum.xda-developers.com/showthread.php?t=1546113
I guess it may be because I had the problem before the update so the simple update didn't fix it.
Is flashing the .zip from this thread like a new ROM? Will it wipe my data??
http://forum.xda-developers.com/showthread.php?t=1334673
Thanks for any help!!
jddunkley said:
I just updated to .17 today and I'm still having the same issue he is. I haven't tried installing the driver, but my TF101 doesn't connect...
I updated from the .zip here:
http://forum.xda-developers.com/showthread.php?t=1546113
I guess it may be because I had the problem before the update so the simple update didn't fix it.
Is flashing the .zip from this thread like a new ROM? Will it wipe my data??
http://forum.xda-developers.com/showthread.php?t=1334673
Thanks for any help!!
Click to expand...
Click to collapse
Did you try Nebucatnetzer's advice on Post #10, that may help? Click the MTP off and on a few times just to make sure then leave it on.
Yeah I did try that, and I turned on USB Debugging as well just to see if it would work. Still no luck Does anyone know if the ROM from the "[UPDATE] CWM - Stock + Root - 9.2.1.17 US Updated pi/2012" thread does a full wipe like it's a new install? Or is it just the update itself?
Quick question, what is your Bxx serial? Asus started changing code midstream in the B70 tabs, I have one of them and it's acting differently from my B50. That's one reason I favor an ota update rather than manual, the update codes may be different for different serials.
At this time I suggest a full backup then a factory reset to stock Android. You may have to go through a lengthy update process so make sure you're plugged in and fully charged first. Good luck!
tedr44 said:
Quick question, what is your Bxx serial? Asus started changing code midstream in the B70 tabs, I have one of them and it's acting differently from my B50. That's one reason I favor an ota update rather than manual, the update codes may be different for different serials.
At this time I suggest a full backup then a factory reset to stock Android. You may have to go through a lengthy update process so make sure you're plugged in and fully charged first. Good luck!
Click to expand...
Click to collapse
Mine is a B50. The reason I manually updated is because I rooted it a long time ago.... Anyway, I'm going to do that and just let the OTA's roll through. Hopefully I get my USB connection back! Thanks for the help!
jddunkley said:
Mine is a B50. The reason I manually updated is because I rooted it a long time ago.... Anyway, I'm going to do that and just let the OTA's roll through. Hopefully I get my USB connection back! Thanks for the help!
Click to expand...
Click to collapse
Good for you, my B50 is doing great after ICS and yours should be no different. Make sure your wifi is exclusively servicing your tab so there's no interference. Be patient, it will finish in due time. Talk to you later!
If we already have this thread. Does any one have an idea why adb can't see my TF?
Driver is installed, devices shows up under device manager and I can access the storage. But adb isn't working. USB debugging is checked.
It works with my GNEX though.
Updated to ICS, lost root and usb connection. I have the drivers installed and nothing happens. I've messed with MTP, USB Debugging and nothing works. If I boot the transformer into recovery and then connect it to my PC it can see the connection but does not have the proper drivers for it though.
Hello there, I have rooted my Arc S with this rom http://forum.xda-developers.com/showthread.php?t=1884958&highlight=wont+boot
After rebooting it stocked on Sony logo, now I can do anything more, It turn on it selfs, I cant shut down. The pc doesnt recognize it so cant flash other one which works...
Is there any other solution please help me. After couples of times trying to connect with PC, I have took of the battery and then none signal from the phone (Before it start it self). But when I try to turn it to recovery mode or connect with pc again the same problem, vibrate and stocked on Sony Logo.
Please anyone help. Will pay for it.
Just re flash some firmware through PC? I assume you've tried flash tool and that you're not using something else? Short if that there is also a Sony recovery program you could try...
Use Flashtool to recover.
ROMs are not for rooting, my friend. You also need to have custom kernel (for some of the ROMs), if you wish to install custom firmware/ROM.
You can use SEUS to flash the latest firmware to your phone provided you did not unlock bootloader. You can relock the bootloader if you have unlocked it earlier though...
僕のLT18iから送られてきた
It works
I have flashed with the official from sony, and now it works. I will wait for some ultimate update to add that rom
Locked or unlocked boot loader?
Give jjs hybrid a shot.
Now I have official software from xperia, and dont know which rom to add
Can someone give me advice for that, I want something that have Jelly Bean mods and etc.
Also Links to which kernel to flash and how to I know to work with flashtool as I do it before.
Thanks
Dimemk said:
Now I have official software from xperia, and dont know which rom to add
Can someone give me advice for that, I want something that have Jelly Bean mods and etc.
Also Links to which kernel to flash and how to I know to work with flashtool as I do it before.
Thanks
Click to expand...
Click to collapse
Read the first link in my sig, then go browse the dev section.
Sent from myushi
Dimemk said:
Now I have official software from xperia, and dont know which rom to add
Can someone give me advice for that, I want something that have Jelly Bean mods and etc.
Also Links to which kernel to flash and how to I know to work with flashtool as I do it before.
Thanks
Click to expand...
Click to collapse
Try this one
http://forum.xda-developers.com/showthread.php?t=1955248
i find fix your problem !
Dimemk said:
Hello there, I have rooted my Arc S with this rom http://forum.xda-developers.com/showthread.php?t=1884958&highlight=wont+boot
After rebooting it stocked on Sony logo, now I can do anything more, It turn on it selfs, I cant shut down. The pc doesnt recognize it so cant flash other one which works...
Is there any other solution please help me. After couples of times trying to connect with PC, I have took of the battery and then none signal from the phone (Before it start it self). But when I try to turn it to recovery mode or connect with pc again the same problem, vibrate and stocked on Sony Logo.
Please anyone help. Will pay for it.
Click to expand...
Click to collapse
install --- KrAzY-ChargerFix --- CWM and OK.
boyob32 said:
Just re flash some firmware through PC? I assume you've tried flash tool and that you're not using something else? Short if that there is also a Sony recovery program you could try...
Click to expand...
Click to collapse
please help i recently rooted my phone and before that i unlocked the bootloader and now i also installed CWM through x-parts app but i am not able to open my phone in recovery mode in any ways using terminal emulator also it failed pls help
Hi is anyone have the same problem with there S4 connecting to PC with USB cable. I have all the drivers installed and I also tried connecting to another pc and same problem.. I also tried 2 cables and no good. I can connect with cable with odin but I can't move files with windows explorer.
So you have tried this on 2 pc's correct, you have keis loaded on both? Are you sure usb debugging is enabled in the dev section?
Are we guessing what phone you have here? Is it a iPuke S4?
Noobs: if you need help, and an accurate help...use this when asking, MAKE IT LAW!
1) What model phone
2) What Kernel
3) What recovery
4) and any other information you can provide.
Sch_i337
3.4.0-453947
theaxman said:
so you have tried this on 2 pc's correct, you have keis loaded on both? Are you sure usb debugging is enabled in the dev section?
Are we guessing what phone you have here? Is it a ipuke s4?:d
noobs: If you need help, and an accurate help...use this when asking, make it law!
1) what model phone
2) what kernel
3) what recovery
4) and any other information you can provide.
Click to expand...
Click to collapse
Sch_i337, hmm a samsung LCD...good phone here
ok you have a att device...and I do not know what you are trying to say here..
3.4.0
Anyways, PLEASE tell me what rom you are running...PLEASE!
stock rom 4.2.2
TheAxman said:
Sch_i337, hmm a samsung LCD...good phone here
ok you have a att device...and I do not know what you are trying to say here..
3.4.0
Anyways, PLEASE tell me what rom you are running...PLEASE!
Click to expand...
Click to collapse
I have the same exact problem as you, I uninstalled drivers, reinstalled, installed kies, turned on usb debugging, took out battery, did all sorts of stuff and it still doesn't work.
Thanks that it my problem that I am having.
dmai1994 said:
I have the same exact problem as you, I uninstalled drivers, reinstalled, installed kies, turned on usb debugging, took out battery, did all sorts of stuff and it still doesn't work.
Click to expand...
Click to collapse
i used to have a driver problem for my galaxy s4 at&t. i resolved it by restoring back to factory stock using odin. you can follow instructions here http://forum.xda-developers.com/showthread.php?t=2261573
I had the same issue as you op, and unfortunately I don't have a good solution. The only thing that fixed it for me was flashing a different rom. I was on Jedi and it wouldn't let me connect to PC (at first, it worked fine but a day later it stopped).
Flashing another rom (mint) fixed it for me.
Sent from my SAMSUNG-SGH-I337 using xda premium
Goliath27 said:
I had the same issue as you op, and unfortunately I don't have a good solution. The only thing that fixed it for me was flashing a different rom. I was on Jedi and it wouldn't let me connect to PC (at first, it worked fine but a day later it stopped).
Flashing another rom (mint) fixed it for me.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I am impressed here, you had and issue with a rom, before you went on a post rampage you tried another rom, and it worked, so you know now it was not a hardware issue but a rom issue, this is how you find solutions on your own. GOOD JOB. this deserves a thanks from me at least.
TheAxman said:
I am impressed here, you had and issue with a rom, before you went on a post rampage you tried another rom, and it worked, so you know now it was not a hardware issue but a rom issue, this is how you find solutions on your own. GOOD JOB. this deserves a thanks from me at least.
Click to expand...
Click to collapse
Not sure if serious. Jk, thanks. But I still think I could have figured out a better solution than completely ditching a rom.
I tried everything listed, from updating drivers to trying to mount the phone through twrp. Nothing worked, even re-flashing the rom, so that gave me the idea to try another.
Goliath27 said:
Not sure if serious. Jk, thanks. But I still think I could have figured out a better solution than completely ditching a rom.
I tried everything listed, from updating drivers to trying to mount the phone through twrp. Nothing worked, even re-flashing the rom, so that gave me the idea to try another.
Click to expand...
Click to collapse
Did not mean it that way, first troubleshooting step should be, are you having the same issue on another rom, if 2 roms have the issue, it is a more serious problem, but as you tried, it is a issue with that rom, so that person can find answers in that rom thread.
calmness sir, it was all in good meaning.
TheAxman said:
Did not mean it that way, first troubleshooting step should be, are you having the same issue on another rom, if 2 roms have the issue, it is a more serious problem, but as you tried, it is a issue with that rom, so that person can find answers in that rom thread.
calmness sir, it was all in good meaning.
Click to expand...
Click to collapse
lol Ax, I threw that JK in there to say Joking. I even said thanks man!
But you are correct, trying another rom did cancel out a hardware problem for me.
Goliath27 said:
lol Ax, I threw that JK in there to say Joking. I even said thanks man!
But you are correct, trying another rom did cancel out a hardware problem for me.
Click to expand...
Click to collapse
We cool, just giving ya some credit, thanks for the thanks
seemingly random loss of USB i337
jimsond said:
Hi is anyone have the same problem with there S4 connecting to PC with USB cable. I have all the drivers installed and I also tried connecting to another pc and same problem.. I also tried 2 cables and no good. I can connect with cable with odin but I can't move files with windows explorer.
Click to expand...
Click to collapse
OK, I337 rooted, unlocked, Goldeneye 7/10 ROM, 3.4.0-917495 kernel, USB debug enabled, running Net10/TMo, via *#0808# set to RNDIS+DM+MODEM, and AWS enabled via *#0011# OP process (I'm now getting 14.3M downloads off H+). wifi-Kies is Titanium frozen, as is restored crapware std email client. I had this problem once before when I left USB setting at RNDIC+DM+MODEM without completing the QPST process, but all was well after I did it right. Only other change I'm aware of is that I installed the Samsung USB drivers for the S3 so I could do the same AWS fix for the wife's i747. Anyway, the Samsung don't show in device manager now, even after reinstall the S4 drivers. Get a phone beep on plugging in, that's it. I plug her S3 in, get beep, screen says connecting as media device, windows 7 says installing drivers, via windows update, and eventually gets it done, saying "USB composite, sgh-i747, CDC/ACM, and ADB interface" (as shown), much as with S4 when it's usb driver install is successful. A puzzlement for a noob, for sure; clearly it's inside the S4, as when I try usb connect into an XP 'puter, while I get the phone beep, there's no usb recognition by the XP either.
Hey!!
thanks in advance for reading my post, I really hope you can help me in some way.
(Sorry for my english)
Well, I rooted my S4 and everything went well. I managed to get the newest Philz Touch + SuperSU on my phone.
Afterwards I wanted to install the new Google Play ROM (4.4.3) from Danvdh. I cleaned up with Philz doing a ''fullwipe'' + ''clean to install a new rom''. Then a problem came up saying: Error 7 or something... Installation Aborted!
Since I did ''clean to install a new rom'' now even my stock rom is gone and I'm pretty much sitting here with an empty phone right? But i cant install another ROM that might install successful, because my phone gets always stuck in the ''Galaxy S4 Bootscreen''. All I can do is getting out the battery to turn it off.
But I can still get into Philz Recovery where I could install a new Rom that might work, but I cant put another ROM .zip to my SD-Card because my computer wont detect my phone since its not getting started and is stuck in the loading screen. Else I would simply put another ROM onto my SD-Card at my PC but my phone doesnt get detected at that point...
Now I tried to install the Stock ROM via Odin (thats what google said might help). But when i tried to flash the md5 ROM Odin just said: FAIL
Im pretty much done with my ideas.. I am really hoping somebody can help me in any way.
Thanks for reading and thanks for any support!
Greets!!!
Re download stock firmware and try again with Odin
Make sure kies isn't running
Try different USB port/cable
Sent from my GT-I9505 using XDA Premium HD app
Feisar90 said:
Hey!!
thanks in advance for reading my post, I really hope you can help me in some way.
(Sorry for my english)
Well, I rooted my S4 and everything went well. I managed to get the newest Philz Touch + SuperSU on my phone.
Afterwards I wanted to install the new Google Play ROM (4.4.3) from Danvdh. I cleaned up with Philz doing a ''fullwipe'' + ''clean to install a new rom''. Then a problem came up saying: Error 7 or something... Installation Aborted!
Since I did ''clean to install a new rom'' now even my stock rom is gone and I'm pretty much sitting here with an empty phone right? But i cant install another ROM that might install successful, because my phone gets always stuck in the ''Galaxy S4 Bootscreen''. All I can do is getting out the battery to turn it off.
But I can still get into Philz Recovery where I could install a new Rom that might work, but I cant put another ROM .zip to my SD-Card because my computer wont detect my phone since its not getting started and is stuck in the loading screen. Else I would simply put another ROM onto my SD-Card at my PC but my phone doesnt get detected at that point...
Now I tried to install the Stock ROM via Odin (thats what google said might help). But when i tried to flash the md5 ROM Odin just said: FAIL
Im pretty much done with my ideas.. I am really hoping somebody can help me in any way.
Thanks for reading and thanks for any support!
Greets!!!
Click to expand...
Click to collapse
Good Morning.
make sure youre phone is in download mode when using odin Volume Down + Home Button + Power Button from phone swithed Off
if u still want the 4.4.3 rom redownload it and make sure!!!!!! you have the correct rom for your phone model.
As a solution for your SD not being read by pc. Just remove it and use a Micro SD adaptor a plug it directly to the PC
Or just simply use sideload ... if u search around a bit youll find a guide for Sideload wich is pretty easy IMHO
Enviado do meu GT-I9505 através de Tapatalk
Error 7 is when you want to flash a rom that is not for your device. So make sure you pick the right rom and that you have the correct recovery for your phone.
[Q&A] [ROM]【5.X】Google Play Edition 【JFLTE-GPE】
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
How to tell if my i9505 is "International"?
As per instruction, "INTL I9505 DEVICES SHOULD USE A CUSTOM GE KERNEL TO PREVENT RANDOM REBOOTS".
How do I tell if my i9505 is an international device?
Also, what is the danger of flashing a different kernel?
Thanks,
Ian
Hi,
I have an S4 i9505 running this rom, and the Ktoosez #1 Kernel. I am interesting in flashing the alucard kernel and have downloaded the GE verison. I am just wondering if I need to run any scripts or clear any settings before I flash the alucard kernel? Or does this get done automatically when I flash? Sorry if this is a repeated question, I have done a search.
Questions
Hello everyone !
I just bought a i9505 and i have some questions about this rom !
First of all, is this rom for i9505 ?
Is every functionnality are working ? (4G and stuff)
Samedi can five me a feedback of this rom ?
Thank you for everyone answers !
question, will this work on S4 GT-I9505? sorry for being a newbie, i don't know the difference of a google play edition of i9505.
Samsung S4 "Unknown device"
Hi, out of the blue my s4 is not recognized by any computer I have, I've tried 3 different computers and the message is always the same "problem installing the driver" or "the device cannot install because the hardware malfunctioned" . I've tried in w7 and xp. Same computers in which the phone used to work perfectly, and I didn't make any changes.
I think I have tried everything now, I've reinstalled the drivers, kies, several times too but nothing. I also tried to reinstall the ROM with all the wipes, and still nothing. Of course I tried debbuging mode and without it as well. It must be a phone issue, because it doesn't work in any computer, but I don't now what it can be. I don't now what else to do.
Right now I'm running the last Danvdh 4.4 Google Edition with ktoonsed kernel, I also tried Googy, and it runs smooth as always.
iansuy said:
As per instruction, "INTL I9505 DEVICES SHOULD USE A CUSTOM GE KERNEL TO PREVENT RANDOM REBOOTS".
How do I tell if my i9505 is an international device?
Also, what is the danger of flashing a different kernel?
Thanks,
Ian
Click to expand...
Click to collapse
Verify in settings about phone, normally none international devices specify another model number , like Canadian it says i337m or JFLTECAN. Or you can check back your battery and there is specified the model.
Install a new kernel don't have any problem, just verify the next things:
1. Kernel is compatible with your model: a lot of kernels are compatible with all i9505 models in AOSP and GoogleEdition kernel versions.
2. The kernel Zip is downloaded correctly: open the zip in any file explorer (windows or Android), if don't open is corrupt and you have yo download again. Another secure check is MD5, almost all developers give a MD5 checksum to verify the files, try to calculate your time download MD5 and compare it.
3. The kernel has to be compatible with ROM installed: there are kernels for Touch wiz, AOSP and Google editions, select the correct one. Caution with AOSP, not all AOSP-based ROMS are compatible with this kernels because has a lot of modifications, verify first in kernel forum (not in ROM forum) if is compatible.
I hope this could help you.
---------- Post added at 08:57 AM ---------- Previous post was at 08:55 AM ----------
nick_robbo said:
Hi,
I have an S4 i9505 running this rom, and the Ktoosez #1 Kernel. I am interesting in flashing the alucard kernel and have downloaded the GE verison. I am just wondering if I need to run any scripts or clear any settings before I flash the alucard kernel? Or does this get done automatically when I flash? Sorry if this is a repeated question, I have done a search.
Click to expand...
Click to collapse
Don't worry, just flash the new kernel. You can clean dalvik and cache , but is not necessary.
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
iSpeeX said:
Hello everyone !
I just bought a i9505 and i have some questions about this rom !
First of all, is this rom for i9505 ?
Is every functionnality are working ? (4G and stuff)
Samedi can five me a feedback of this rom ?
Thank you for everyone answers !
Click to expand...
Click to collapse
Yes, yes, and is awesome, is a "you have to try it" ROM
---------- Post added at 09:00 AM ---------- Previous post was at 08:58 AM ----------
popodc said:
question, will this work on S4 GT-I9505? sorry for being a newbie, i don't know the difference of a google play edition of i9505.
Click to expand...
Click to collapse
Google Edition is just a variant of i9505, like at&t or T-Mobile, but with the difference is a clean android ROM without touch wiz and all Samsung blootware, updated by google.
---------- Post added at 09:04 AM ---------- Previous post was at 09:00 AM ----------
Ambite said:
Hi, out of the blue my s4 is not recognized by any computer I have, I've tried 3 different computers and the message is always the same "problem installing the driver" or "the device cannot install because the hardware malfunctioned" . I've tried in w7 and xp. Same computers in which the phone used to work perfectly, and I didn't make any changes.
I think I have tried everything now, I've reinstalled the drivers, kies, several times too but nothing. I also tried to reinstall the ROM with all the wipes, and still nothing. Of course I tried debbuging mode and without it as well. It must be a phone issue, because it doesn't work in any computer, but I don't now what it can be. I don't now what else to do.
Right now I'm running the last Danvdh 4.4 Google Edition with ktoonsed kernel, I also tried Googy, and it runs smooth as always.
Click to expand...
Click to collapse
Just a few questions, did you try with another cable? Sometimes USB cable have problems. Did you try uninstalling all Samsung devices and connect in PC ? Using different USB ports in PC? Did you try in Linux? Did you try connecting with other ROM like CM or Touchwiz?
furbyx92 said:
Just a few questions, did you try with another cable? Sometimes USB cable have problems. Did you try uninstalling all Samsung devices and connect in PC ? Using different USB ports in PC? Did you try in Linux? Did you try connecting with other ROM like CM or Touchwiz?
Click to expand...
Click to collapse
Hi, I did try several cables, even different computers, nothing works. I have tried another S4 (with stock ROM) and a S3 (Alliance ROM), when I connect them to a computer in which there are no drivers installed (right after installing windows in it), the computer says SAMSUNG_DEVICE, but when I connect mine the computer says UNKNOWN_DEVICE. In computers with the drivers installed, the other two work just fine, but mine is still UKNOWN_DEVICE, or cannot complete the install due to a hardware malfunction. I tried WXP and W7. I don't have access to Linux.
At the moment I have only tried the Danvdh ROM, I've done a clean install twice already not solving the problem. I haven't tried yet another ROM because I like this one and I was hoping anyone to know what is happening. Next step is trying another ROM, but it doesn't make any sense to me.
Thanks for the response.
Ambite said:
Hi, I did try several cables, even different computers, nothing works. I have tried another S4 (with stock ROM) and a S3 (Alliance ROM), when I connect them to a computer in which there are no drivers installed (right after installing windows in it), the computer says SAMSUNG_DEVICE, but when I connect mine the computer says UNKNOWN_DEVICE. In computers with the drivers installed, the other two work just fine, but mine is still UKNOWN_DEVICE, or cannot complete the install due to a hardware malfunction. I tried WXP and W7. I don't have access to Linux.
At the moment I have only tried the Danvdh ROM, I've done a clean install twice already not solving the problem. I haven't tried yet another ROM because I like this one and I was hoping anyone to know what is happening. Next step is trying another ROM, but it doesn't make any sense to me.
Thanks for the response.
Click to expand...
Click to collapse
Device detection could depend of device sign, maybe is something with device or is a configuration in ROM or Kernel. Do you have last boot loader?
furbyx92 said:
Device detection could depend of device sign, maybe is something with device or is a configuration in ROM or Kernel. Do you have last boot loader?
Click to expand...
Click to collapse
No, I don't. Can I edit the device sign with root explorer? If not,can you recommend a ROM which does it all together? I can't connect via odin either, the message is the same.
Thanks!
Ambite said:
No, I don't. Can I edit the device sign with root explorer? If not,can you recommend a ROM which does it all together? I can't connect via odin either, the message is the same.
Thanks!
Click to expand...
Click to collapse
Odin I believe only works with Samsung stock ROM, you could try that just to be sure is not device problem. Check if your build.prop file in system is correct, verify it with an original build.prop (search in Google)
furbyx92 said:
Odin I believe only works with Samsung stock ROM, you could try that just to be sure is not device problem. Check if your build.prop file in system is correct, verify it with an original build.prop (search in Google)
Click to expand...
Click to collapse
I tried a STOCK ROM, the problem remains. I can't understand what happened, because the USB is not broken because the computer recognizes something.. I don't understand. I don't know what else can I do.
Ambite said:
I tried a STOCK ROM, the problem remains. I can't understand what happened, because the USB is not broken because the computer recognizes something.. I don't understand. I don't know what else can I do.
Click to expand...
Click to collapse
Me neither, I'm out of ideas.... What do you think [emoji55] [emoji53]
furbyx92 said:
Me neither, I'm out of ideas.... What do you think [emoji55] [emoji53]
Click to expand...
Click to collapse
OK! Thank you for your help! Maybe someone else thinks of something.
Ambite said:
OK! Thank you for your help! Maybe someone else thinks of something.
Click to expand...
Click to collapse
OK, just to rewind
Cable problem ? Not, because it works with other phones.
PC problem ? Not, because it works with other phones and drivers are OK.
ROM problem ? Not, because other ROM doesn't work too.
Phone problem ? You don't think so, because it charge. But if I remember, charge USB needs only 2 pins and not the 4 one, PC communication needs the 4 pins. Try with a OTG Cable to connect a USB storage to your phone and if it's detected then I have no more ideas but if not then maybe is phone USB problem. (Hardware problem)
USB OTG is an USB cable with female USB - micro USB to connect a USB to you phone, is useful because you can connect a keyboard, mouse, USB storage and other devices. It works with the 4 pins and maybe help to detect where is the problem.
furbyx92 said:
OK, just to rewind
Cable problem ? Not, because it works with other phones.
PC problem ? Not, because it works with other phones and drivers are OK.
ROM problem ? Not, because other ROM doesn't work too.
Phone problem ? You don't think so, because it charge. But if I remember, charge USB needs only 2 pins and not the 4 one, PC communication needs the 4 pins. Try with a OTG Cable to connect a USB storage to your phone and if it's detected then I have no more ideas but if not then maybe is phone USB problem. (Hardware problem)
USB OTG is an USB cable with female USB - micro USB to connect a USB to you phone, is useful because you can connect a keyboard, mouse, USB storage and other devices. It works with the 4 pins and maybe help to detect where is the problem.
Click to expand...
Click to collapse
I just bought the USB DOCK in eBay, I'm going to replace the hole piece. I'll let you know what happened. Thanks a lot.
Hi at all I represent my problem with news:
If I skip manually tracks volume remain equal for all tracks, but if I don't touch the phone and tracks changes automatically at the end of one, the next track has an upper volume. To normalize the volume of this track I have to change track to another and then return to this one...
I've tried also to change from MUSICFX to DSP manager but nothing change.
I puntualize that only volume changes, not EQ presets not applied or other.... only volume locks on upper db..
Inviato dal mio GT-I9505G utilizzando Tapatalk
elzangi said:
Hi at all I represent my problem with news:
If I skip manually tracks volume remain equal for all tracks, but if I don't touch the phone and tracks changes automatically at the end of one, the next track has an upper volume. To normalize the volume of this track I have to change track to another and then return to this one...
I've tried also to change from MUSICFX to DSP manager but nothing change.
I puntualize that only volume changes, not EQ presets not applied or other.... only volume locks on upper db..
Inviato dal mio GT-I9505G utilizzando Tapatalk
Click to expand...
Click to collapse
Which app do you use? Because there are apps that doesn't use android equalizer.
.
I just flashed a pure nexus build and when I lock my screen I lose signal after a few minutes... I have no idea where to go from here as I'm on the newest firmware... Any help please?
Really want to fix this issue
Sent from my GT-I9505G using XDA Free mobile app