[Q&A] [ROM]【5.X】Google Play Edition 【JFLTE-GPE】
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
How to tell if my i9505 is "International"?
As per instruction, "INTL I9505 DEVICES SHOULD USE A CUSTOM GE KERNEL TO PREVENT RANDOM REBOOTS".
How do I tell if my i9505 is an international device?
Also, what is the danger of flashing a different kernel?
Thanks,
Ian
Hi,
I have an S4 i9505 running this rom, and the Ktoosez #1 Kernel. I am interesting in flashing the alucard kernel and have downloaded the GE verison. I am just wondering if I need to run any scripts or clear any settings before I flash the alucard kernel? Or does this get done automatically when I flash? Sorry if this is a repeated question, I have done a search.
Questions
Hello everyone !
I just bought a i9505 and i have some questions about this rom !
First of all, is this rom for i9505 ?
Is every functionnality are working ? (4G and stuff)
Samedi can five me a feedback of this rom ?
Thank you for everyone answers !
question, will this work on S4 GT-I9505? sorry for being a newbie, i don't know the difference of a google play edition of i9505.
Samsung S4 "Unknown device"
Hi, out of the blue my s4 is not recognized by any computer I have, I've tried 3 different computers and the message is always the same "problem installing the driver" or "the device cannot install because the hardware malfunctioned" . I've tried in w7 and xp. Same computers in which the phone used to work perfectly, and I didn't make any changes.
I think I have tried everything now, I've reinstalled the drivers, kies, several times too but nothing. I also tried to reinstall the ROM with all the wipes, and still nothing. Of course I tried debbuging mode and without it as well. It must be a phone issue, because it doesn't work in any computer, but I don't now what it can be. I don't now what else to do.
Right now I'm running the last Danvdh 4.4 Google Edition with ktoonsed kernel, I also tried Googy, and it runs smooth as always.
iansuy said:
As per instruction, "INTL I9505 DEVICES SHOULD USE A CUSTOM GE KERNEL TO PREVENT RANDOM REBOOTS".
How do I tell if my i9505 is an international device?
Also, what is the danger of flashing a different kernel?
Thanks,
Ian
Click to expand...
Click to collapse
Verify in settings about phone, normally none international devices specify another model number , like Canadian it says i337m or JFLTECAN. Or you can check back your battery and there is specified the model.
Install a new kernel don't have any problem, just verify the next things:
1. Kernel is compatible with your model: a lot of kernels are compatible with all i9505 models in AOSP and GoogleEdition kernel versions.
2. The kernel Zip is downloaded correctly: open the zip in any file explorer (windows or Android), if don't open is corrupt and you have yo download again. Another secure check is MD5, almost all developers give a MD5 checksum to verify the files, try to calculate your time download MD5 and compare it.
3. The kernel has to be compatible with ROM installed: there are kernels for Touch wiz, AOSP and Google editions, select the correct one. Caution with AOSP, not all AOSP-based ROMS are compatible with this kernels because has a lot of modifications, verify first in kernel forum (not in ROM forum) if is compatible.
I hope this could help you.
---------- Post added at 08:57 AM ---------- Previous post was at 08:55 AM ----------
nick_robbo said:
Hi,
I have an S4 i9505 running this rom, and the Ktoosez #1 Kernel. I am interesting in flashing the alucard kernel and have downloaded the GE verison. I am just wondering if I need to run any scripts or clear any settings before I flash the alucard kernel? Or does this get done automatically when I flash? Sorry if this is a repeated question, I have done a search.
Click to expand...
Click to collapse
Don't worry, just flash the new kernel. You can clean dalvik and cache , but is not necessary.
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
iSpeeX said:
Hello everyone !
I just bought a i9505 and i have some questions about this rom !
First of all, is this rom for i9505 ?
Is every functionnality are working ? (4G and stuff)
Samedi can five me a feedback of this rom ?
Thank you for everyone answers !
Click to expand...
Click to collapse
Yes, yes, and is awesome, is a "you have to try it" ROM
---------- Post added at 09:00 AM ---------- Previous post was at 08:58 AM ----------
popodc said:
question, will this work on S4 GT-I9505? sorry for being a newbie, i don't know the difference of a google play edition of i9505.
Click to expand...
Click to collapse
Google Edition is just a variant of i9505, like at&t or T-Mobile, but with the difference is a clean android ROM without touch wiz and all Samsung blootware, updated by google.
---------- Post added at 09:04 AM ---------- Previous post was at 09:00 AM ----------
Ambite said:
Hi, out of the blue my s4 is not recognized by any computer I have, I've tried 3 different computers and the message is always the same "problem installing the driver" or "the device cannot install because the hardware malfunctioned" . I've tried in w7 and xp. Same computers in which the phone used to work perfectly, and I didn't make any changes.
I think I have tried everything now, I've reinstalled the drivers, kies, several times too but nothing. I also tried to reinstall the ROM with all the wipes, and still nothing. Of course I tried debbuging mode and without it as well. It must be a phone issue, because it doesn't work in any computer, but I don't now what it can be. I don't now what else to do.
Right now I'm running the last Danvdh 4.4 Google Edition with ktoonsed kernel, I also tried Googy, and it runs smooth as always.
Click to expand...
Click to collapse
Just a few questions, did you try with another cable? Sometimes USB cable have problems. Did you try uninstalling all Samsung devices and connect in PC ? Using different USB ports in PC? Did you try in Linux? Did you try connecting with other ROM like CM or Touchwiz?
furbyx92 said:
Just a few questions, did you try with another cable? Sometimes USB cable have problems. Did you try uninstalling all Samsung devices and connect in PC ? Using different USB ports in PC? Did you try in Linux? Did you try connecting with other ROM like CM or Touchwiz?
Click to expand...
Click to collapse
Hi, I did try several cables, even different computers, nothing works. I have tried another S4 (with stock ROM) and a S3 (Alliance ROM), when I connect them to a computer in which there are no drivers installed (right after installing windows in it), the computer says SAMSUNG_DEVICE, but when I connect mine the computer says UNKNOWN_DEVICE. In computers with the drivers installed, the other two work just fine, but mine is still UKNOWN_DEVICE, or cannot complete the install due to a hardware malfunction. I tried WXP and W7. I don't have access to Linux.
At the moment I have only tried the Danvdh ROM, I've done a clean install twice already not solving the problem. I haven't tried yet another ROM because I like this one and I was hoping anyone to know what is happening. Next step is trying another ROM, but it doesn't make any sense to me.
Thanks for the response.
Ambite said:
Hi, I did try several cables, even different computers, nothing works. I have tried another S4 (with stock ROM) and a S3 (Alliance ROM), when I connect them to a computer in which there are no drivers installed (right after installing windows in it), the computer says SAMSUNG_DEVICE, but when I connect mine the computer says UNKNOWN_DEVICE. In computers with the drivers installed, the other two work just fine, but mine is still UKNOWN_DEVICE, or cannot complete the install due to a hardware malfunction. I tried WXP and W7. I don't have access to Linux.
At the moment I have only tried the Danvdh ROM, I've done a clean install twice already not solving the problem. I haven't tried yet another ROM because I like this one and I was hoping anyone to know what is happening. Next step is trying another ROM, but it doesn't make any sense to me.
Thanks for the response.
Click to expand...
Click to collapse
Device detection could depend of device sign, maybe is something with device or is a configuration in ROM or Kernel. Do you have last boot loader?
furbyx92 said:
Device detection could depend of device sign, maybe is something with device or is a configuration in ROM or Kernel. Do you have last boot loader?
Click to expand...
Click to collapse
No, I don't. Can I edit the device sign with root explorer? If not,can you recommend a ROM which does it all together? I can't connect via odin either, the message is the same.
Thanks!
Ambite said:
No, I don't. Can I edit the device sign with root explorer? If not,can you recommend a ROM which does it all together? I can't connect via odin either, the message is the same.
Thanks!
Click to expand...
Click to collapse
Odin I believe only works with Samsung stock ROM, you could try that just to be sure is not device problem. Check if your build.prop file in system is correct, verify it with an original build.prop (search in Google)
furbyx92 said:
Odin I believe only works with Samsung stock ROM, you could try that just to be sure is not device problem. Check if your build.prop file in system is correct, verify it with an original build.prop (search in Google)
Click to expand...
Click to collapse
I tried a STOCK ROM, the problem remains. I can't understand what happened, because the USB is not broken because the computer recognizes something.. I don't understand. I don't know what else can I do.
Ambite said:
I tried a STOCK ROM, the problem remains. I can't understand what happened, because the USB is not broken because the computer recognizes something.. I don't understand. I don't know what else can I do.
Click to expand...
Click to collapse
Me neither, I'm out of ideas.... What do you think [emoji55] [emoji53]
furbyx92 said:
Me neither, I'm out of ideas.... What do you think [emoji55] [emoji53]
Click to expand...
Click to collapse
OK! Thank you for your help! Maybe someone else thinks of something.
Ambite said:
OK! Thank you for your help! Maybe someone else thinks of something.
Click to expand...
Click to collapse
OK, just to rewind
Cable problem ? Not, because it works with other phones.
PC problem ? Not, because it works with other phones and drivers are OK.
ROM problem ? Not, because other ROM doesn't work too.
Phone problem ? You don't think so, because it charge. But if I remember, charge USB needs only 2 pins and not the 4 one, PC communication needs the 4 pins. Try with a OTG Cable to connect a USB storage to your phone and if it's detected then I have no more ideas but if not then maybe is phone USB problem. (Hardware problem)
USB OTG is an USB cable with female USB - micro USB to connect a USB to you phone, is useful because you can connect a keyboard, mouse, USB storage and other devices. It works with the 4 pins and maybe help to detect where is the problem.
furbyx92 said:
OK, just to rewind
Cable problem ? Not, because it works with other phones.
PC problem ? Not, because it works with other phones and drivers are OK.
ROM problem ? Not, because other ROM doesn't work too.
Phone problem ? You don't think so, because it charge. But if I remember, charge USB needs only 2 pins and not the 4 one, PC communication needs the 4 pins. Try with a OTG Cable to connect a USB storage to your phone and if it's detected then I have no more ideas but if not then maybe is phone USB problem. (Hardware problem)
USB OTG is an USB cable with female USB - micro USB to connect a USB to you phone, is useful because you can connect a keyboard, mouse, USB storage and other devices. It works with the 4 pins and maybe help to detect where is the problem.
Click to expand...
Click to collapse
I just bought the USB DOCK in eBay, I'm going to replace the hole piece. I'll let you know what happened. Thanks a lot.
Hi at all I represent my problem with news:
If I skip manually tracks volume remain equal for all tracks, but if I don't touch the phone and tracks changes automatically at the end of one, the next track has an upper volume. To normalize the volume of this track I have to change track to another and then return to this one...
I've tried also to change from MUSICFX to DSP manager but nothing change.
I puntualize that only volume changes, not EQ presets not applied or other.... only volume locks on upper db..
Inviato dal mio GT-I9505G utilizzando Tapatalk
elzangi said:
Hi at all I represent my problem with news:
If I skip manually tracks volume remain equal for all tracks, but if I don't touch the phone and tracks changes automatically at the end of one, the next track has an upper volume. To normalize the volume of this track I have to change track to another and then return to this one...
I've tried also to change from MUSICFX to DSP manager but nothing change.
I puntualize that only volume changes, not EQ presets not applied or other.... only volume locks on upper db..
Inviato dal mio GT-I9505G utilizzando Tapatalk
Click to expand...
Click to collapse
Which app do you use? Because there are apps that doesn't use android equalizer.
.
I just flashed a pure nexus build and when I lock my screen I lose signal after a few minutes... I have no idea where to go from here as I'm on the newest firmware... Any help please?
Really want to fix this issue
Sent from my GT-I9505G using XDA Free mobile app
Related
My problem:
No reaktion if i connect with usb.
I had n new device with update 4.0.3 official..
asus sync on P: foun no device.
adb devices = nothing.
I had two cable and tried them both.
Also the transformer what to do when connected.
other devices works.
Maybe a driver?
Please give me a help.
Kind regards
gandalf
You need the driver
1234556789 said:
My problem:
No reaktion if i connect with usb.
I had n new device with update 4.0.3 official..
asus sync on P: foun no device.
adb devices = nothing.
I had two cable and tried them both.
Also the transformer what to do when connected.
other devices works.
Maybe a driver?
Please give me a help.
Kind regards
gandalf
Click to expand...
Click to collapse
ASUS_Android_USB_drivers_for_Windows.zip file is attached. Just download and install on your pc.
Hope it works!
no message here
tedr44 said:
ASUS_Android_USB_drivers_for_Windows.zip file is attached. Just download and install on your pc.Hope it works!
Click to expand...
Click to collapse
-I am sorry-no- I don´t know exact how to install , so i install the asus PC-suite before witch include the driver.
How can i prove if driver is install?
It is strange that there is no change if i plug in the device - or am i wrong.
- with other device -usb sticks for example it works
I tried another computer wihout drivers - no reaktion if i plug in.
Any idea?
kind regards
gandalf
I had the same issue with usb and flashed the update zip which remedied the problem at hand.
Vintage76 said:
I had the same issue with usb and flashed the update zip which remedied the problem at hand.
Click to expand...
Click to collapse
Do you have a link -and can i use it for DE version?
on the official side i only find the same i have:
Eee Pad Transformer TF101 Firmware: V9.2.1.11 Only for DE SKU (Android 4.0.3)
--edit : found it - using the update OTA in the transformer--
I really hope it works - The update works- but the same Problem........
kind regards
gandalf
Is your device rooted?
I fill find the link and post it.......
---------- Post added at 12:56 AM ---------- Previous post was at 12:49 AM ----------
Here you go, read through it carefully.. DE version is untested.
Must be rooted.....
http://forum.xda-developers.com/showthread.php?t=1334673
No, it is not rooted.
-And i had already update to newest official version by OTA- .but thanks
Kind regards
Gandalf
1234556789 said:
-I am sorry-no- I don´t know exact how to install , so i install the asus PC-suite before witch include the driver.
How can i prove if driver is install?
It is strange that there is no change if i plug in the device - or am i wrong.
- with other device -usb sticks for example it works
I tried another computer wihout drivers - no reaktion if i plug in.
Any idea?
kind regards
gandalf
Click to expand...
Click to collapse
So the device driver is already installed but still no connection, maybe you should turn on usb debugging, try this:
Go to Settings, Developer options and check USB debugging then connect your usb. If it doesn't work, then your ICS update may have caused the problem. You may have to restore your tablet to HC and recheck your usb connection before upgrading to iCS. Good luck!
Did you try this?
Under Settings/Storage there is a menu in the upper right corner.
Open it and then check MTP.
Click to expand...
Click to collapse
Nebucatnetzer said:
Did you try this?
Click to expand...
Click to collapse
Good info, I wonder if the ICS update disabled this setting? That would definitely cause the usb connection problem.
I know from the GNEX that it happens sometimes if you're flashing a custom ROM so I thought it might be the same case here.
I just updated to .17 today and I'm still having the same issue he is. I haven't tried installing the driver, but my TF101 doesn't connect...
I updated from the .zip here:
http://forum.xda-developers.com/showthread.php?t=1546113
I guess it may be because I had the problem before the update so the simple update didn't fix it.
Is flashing the .zip from this thread like a new ROM? Will it wipe my data??
http://forum.xda-developers.com/showthread.php?t=1334673
Thanks for any help!!
jddunkley said:
I just updated to .17 today and I'm still having the same issue he is. I haven't tried installing the driver, but my TF101 doesn't connect...
I updated from the .zip here:
http://forum.xda-developers.com/showthread.php?t=1546113
I guess it may be because I had the problem before the update so the simple update didn't fix it.
Is flashing the .zip from this thread like a new ROM? Will it wipe my data??
http://forum.xda-developers.com/showthread.php?t=1334673
Thanks for any help!!
Click to expand...
Click to collapse
Did you try Nebucatnetzer's advice on Post #10, that may help? Click the MTP off and on a few times just to make sure then leave it on.
Yeah I did try that, and I turned on USB Debugging as well just to see if it would work. Still no luck Does anyone know if the ROM from the "[UPDATE] CWM - Stock + Root - 9.2.1.17 US Updated pi/2012" thread does a full wipe like it's a new install? Or is it just the update itself?
Quick question, what is your Bxx serial? Asus started changing code midstream in the B70 tabs, I have one of them and it's acting differently from my B50. That's one reason I favor an ota update rather than manual, the update codes may be different for different serials.
At this time I suggest a full backup then a factory reset to stock Android. You may have to go through a lengthy update process so make sure you're plugged in and fully charged first. Good luck!
tedr44 said:
Quick question, what is your Bxx serial? Asus started changing code midstream in the B70 tabs, I have one of them and it's acting differently from my B50. That's one reason I favor an ota update rather than manual, the update codes may be different for different serials.
At this time I suggest a full backup then a factory reset to stock Android. You may have to go through a lengthy update process so make sure you're plugged in and fully charged first. Good luck!
Click to expand...
Click to collapse
Mine is a B50. The reason I manually updated is because I rooted it a long time ago.... Anyway, I'm going to do that and just let the OTA's roll through. Hopefully I get my USB connection back! Thanks for the help!
jddunkley said:
Mine is a B50. The reason I manually updated is because I rooted it a long time ago.... Anyway, I'm going to do that and just let the OTA's roll through. Hopefully I get my USB connection back! Thanks for the help!
Click to expand...
Click to collapse
Good for you, my B50 is doing great after ICS and yours should be no different. Make sure your wifi is exclusively servicing your tab so there's no interference. Be patient, it will finish in due time. Talk to you later!
If we already have this thread. Does any one have an idea why adb can't see my TF?
Driver is installed, devices shows up under device manager and I can access the storage. But adb isn't working. USB debugging is checked.
It works with my GNEX though.
Updated to ICS, lost root and usb connection. I have the drivers installed and nothing happens. I've messed with MTP, USB Debugging and nothing works. If I boot the transformer into recovery and then connect it to my PC it can see the connection but does not have the proper drivers for it though.
Hi is anyone have the same problem with there S4 connecting to PC with USB cable. I have all the drivers installed and I also tried connecting to another pc and same problem.. I also tried 2 cables and no good. I can connect with cable with odin but I can't move files with windows explorer.
So you have tried this on 2 pc's correct, you have keis loaded on both? Are you sure usb debugging is enabled in the dev section?
Are we guessing what phone you have here? Is it a iPuke S4?
Noobs: if you need help, and an accurate help...use this when asking, MAKE IT LAW!
1) What model phone
2) What Kernel
3) What recovery
4) and any other information you can provide.
Sch_i337
3.4.0-453947
theaxman said:
so you have tried this on 2 pc's correct, you have keis loaded on both? Are you sure usb debugging is enabled in the dev section?
Are we guessing what phone you have here? Is it a ipuke s4?:d
noobs: If you need help, and an accurate help...use this when asking, make it law!
1) what model phone
2) what kernel
3) what recovery
4) and any other information you can provide.
Click to expand...
Click to collapse
Sch_i337, hmm a samsung LCD...good phone here
ok you have a att device...and I do not know what you are trying to say here..
3.4.0
Anyways, PLEASE tell me what rom you are running...PLEASE!
stock rom 4.2.2
TheAxman said:
Sch_i337, hmm a samsung LCD...good phone here
ok you have a att device...and I do not know what you are trying to say here..
3.4.0
Anyways, PLEASE tell me what rom you are running...PLEASE!
Click to expand...
Click to collapse
I have the same exact problem as you, I uninstalled drivers, reinstalled, installed kies, turned on usb debugging, took out battery, did all sorts of stuff and it still doesn't work.
Thanks that it my problem that I am having.
dmai1994 said:
I have the same exact problem as you, I uninstalled drivers, reinstalled, installed kies, turned on usb debugging, took out battery, did all sorts of stuff and it still doesn't work.
Click to expand...
Click to collapse
i used to have a driver problem for my galaxy s4 at&t. i resolved it by restoring back to factory stock using odin. you can follow instructions here http://forum.xda-developers.com/showthread.php?t=2261573
I had the same issue as you op, and unfortunately I don't have a good solution. The only thing that fixed it for me was flashing a different rom. I was on Jedi and it wouldn't let me connect to PC (at first, it worked fine but a day later it stopped).
Flashing another rom (mint) fixed it for me.
Sent from my SAMSUNG-SGH-I337 using xda premium
Goliath27 said:
I had the same issue as you op, and unfortunately I don't have a good solution. The only thing that fixed it for me was flashing a different rom. I was on Jedi and it wouldn't let me connect to PC (at first, it worked fine but a day later it stopped).
Flashing another rom (mint) fixed it for me.
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
I am impressed here, you had and issue with a rom, before you went on a post rampage you tried another rom, and it worked, so you know now it was not a hardware issue but a rom issue, this is how you find solutions on your own. GOOD JOB. this deserves a thanks from me at least.
TheAxman said:
I am impressed here, you had and issue with a rom, before you went on a post rampage you tried another rom, and it worked, so you know now it was not a hardware issue but a rom issue, this is how you find solutions on your own. GOOD JOB. this deserves a thanks from me at least.
Click to expand...
Click to collapse
Not sure if serious. Jk, thanks. But I still think I could have figured out a better solution than completely ditching a rom.
I tried everything listed, from updating drivers to trying to mount the phone through twrp. Nothing worked, even re-flashing the rom, so that gave me the idea to try another.
Goliath27 said:
Not sure if serious. Jk, thanks. But I still think I could have figured out a better solution than completely ditching a rom.
I tried everything listed, from updating drivers to trying to mount the phone through twrp. Nothing worked, even re-flashing the rom, so that gave me the idea to try another.
Click to expand...
Click to collapse
Did not mean it that way, first troubleshooting step should be, are you having the same issue on another rom, if 2 roms have the issue, it is a more serious problem, but as you tried, it is a issue with that rom, so that person can find answers in that rom thread.
calmness sir, it was all in good meaning.
TheAxman said:
Did not mean it that way, first troubleshooting step should be, are you having the same issue on another rom, if 2 roms have the issue, it is a more serious problem, but as you tried, it is a issue with that rom, so that person can find answers in that rom thread.
calmness sir, it was all in good meaning.
Click to expand...
Click to collapse
lol Ax, I threw that JK in there to say Joking. I even said thanks man!
But you are correct, trying another rom did cancel out a hardware problem for me.
Goliath27 said:
lol Ax, I threw that JK in there to say Joking. I even said thanks man!
But you are correct, trying another rom did cancel out a hardware problem for me.
Click to expand...
Click to collapse
We cool, just giving ya some credit, thanks for the thanks
seemingly random loss of USB i337
jimsond said:
Hi is anyone have the same problem with there S4 connecting to PC with USB cable. I have all the drivers installed and I also tried connecting to another pc and same problem.. I also tried 2 cables and no good. I can connect with cable with odin but I can't move files with windows explorer.
Click to expand...
Click to collapse
OK, I337 rooted, unlocked, Goldeneye 7/10 ROM, 3.4.0-917495 kernel, USB debug enabled, running Net10/TMo, via *#0808# set to RNDIS+DM+MODEM, and AWS enabled via *#0011# OP process (I'm now getting 14.3M downloads off H+). wifi-Kies is Titanium frozen, as is restored crapware std email client. I had this problem once before when I left USB setting at RNDIC+DM+MODEM without completing the QPST process, but all was well after I did it right. Only other change I'm aware of is that I installed the Samsung USB drivers for the S3 so I could do the same AWS fix for the wife's i747. Anyway, the Samsung don't show in device manager now, even after reinstall the S4 drivers. Get a phone beep on plugging in, that's it. I plug her S3 in, get beep, screen says connecting as media device, windows 7 says installing drivers, via windows update, and eventually gets it done, saying "USB composite, sgh-i747, CDC/ACM, and ADB interface" (as shown), much as with S4 when it's usb driver install is successful. A puzzlement for a noob, for sure; clearly it's inside the S4, as when I try usb connect into an XP 'puter, while I get the phone beep, there's no usb recognition by the XP either.
Can ROM somehow cause problems with USB recognising of my SGS4 I9505 ?
Charging is fine, but can't be recognized by PC.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
My question is simple and i need simple answer (like yes or no). I won't explain how many threads i've checked- simply i'll tell what i've tried.
1. Dozens of cables
2. Few different laptops with different OS
3. A lot USB ports
4. Cleaning phone USB port
5. Replacing with another 2 USB boards from other SGS4
6. Hard phone cache and factory reset
7. Delete all drivers, reinstall em, also KIES, Error code i receive in device manager is 43. Tried to force Samsung drivers for this device, it accept them, but gives error code 10 - device can not start.
Phone can't be recognized in all modes. Last time it was connecting properly was when i flashed last ROM with Odin. It is STOCK rom. - I9505XXUHOB7_I9505YBTHOB7_DBT-Stock ROM Galaxy s4 and it has received several updates OTA from Samsung.
I have 2 more SGS4 which connects and works fine with all cables. They have never been flashed or rooted.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
THANKS a lot in advance !!!
grosseader said:
Can ROM somehow cause problems with USB recognising of my SGS4 I9505 ?
Charging is fine, but can't be recognized by PC.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
My question is simple and i need simple answer (like yes or no). I won't explain how many threads i've checked- simply i'll tell what i've tried.
1. Dozens of cables
2. Few different laptops with different OS
3. A lot USB ports
4. Cleaning phone USB port
5. Replacing with another 2 USB boards from other SGS4
6. Hard phone cache and factory reset
7. Delete all drivers, reinstall em, also KIES, Error code i receive in device manager is 43. Tried to force Samsung drivers for this device, it accept them, but gives error code 10 - device can not start.
Phone can't be recognized in all modes. Last time it was connecting properly was when i flashed last ROM with Odin. It is STOCK rom. - I9505XXUHOB7_I9505YBTHOB7_DBT-Stock ROM Galaxy s4 and it has received several updates OTA from Samsung.
I have 2 more SGS4 which connects and works fine with all cables. They have never been flashed or rooted.
Shall i try this damaged SGS4 with other ROMs flashing with custom recovery and SD card, or it can only be hardware problem, so no need to try other ROMS ?
THANKS a lot in advance !!!
Click to expand...
Click to collapse
Does it get detected when you are booted into download mode?
Lennyz1988 said:
Does it get detected when you are booted into download mode?
Click to expand...
Click to collapse
Yes it is detected, BUT not recognized. Odin can't see it.
grosseader said:
Yes it is detected, BUT not recognized. Odin can't see it.
Click to expand...
Click to collapse
What does Windows see? What is the name that the device that is being detected?
Lennyz1988 said:
What does Windows see? What is the name that the device that is being detected?
Click to expand...
Click to collapse
Unknown device in Universal Serial Bus controllers
Windows has stopped this device because it has reported problems. (Code 43)
You need drivers I've ran into this multiple times. What OS are you running on your computer?
agraceful said:
You need drivers I've ran into this multiple times. What OS are you running on your computer?
Click to expand...
Click to collapse
PLS ! Read 1st post !
Just need to know has ROM anything to do with USB connectivity?
So should i bang my head and search for flashing without custom recovery, root and USB connectivity !? Is there any chances to flash that way another rom, an will it fix usb connectivity ?
If ROM has NOTHING to do with usb connectivity- then i'll just leave it that way! It is simple ! But no simple answer yet
grosseader said:
PLS ! Read 1st post !
Just need to know has ROM anything to do with USB connectivity?
So should i bang my head and search for flashing without custom recovery, root and USB connectivity !? Is there any chances to flash that way another rom, an will it fix usb connectivity ?
If ROM has NOTHING to do with usb connectivity- then i'll just leave it that way! It is simple ! But no simple answer yet
Click to expand...
Click to collapse
Download mode is separated from the rom. So no, the rom has nothing to do with usb connectivity while in download mode. Another rom will not fix your problems.
grosseader said:
PLS ! Read 1st post !
Just need to know has ROM anything to do with USB connectivity?
So should i bang my head and search for flashing without custom recovery, root and USB connectivity !? Is there any chances to flash that way another rom, an will it fix usb connectivity ?
If ROM has NOTHING to do with usb connectivity- then i'll just leave it that way! It is simple ! But no simple answer yet
Click to expand...
Click to collapse
I told you how to fix your problem. And nor I'll kindly tell you to piss off. I'm sick of ignorant people asking dumb questions. Use Google or gtfo.
Lennyz1988 said:
Download mode is separated from the rom. So no, the rom has nothing to do with usb connectivity while in download mode. Another rom will not fix your problems.
Click to expand...
Click to collapse
There must be button Thanks ! 10x
agraceful said:
I told you how to fix your problem. And nor I'll kindly tell you to piss off. I'm sick of ignorant people asking dumb questions. Use Google or gtfo.
Click to expand...
Click to collapse
Dude, i don't want to be irrogant or such ! sorry for my bad english or if it looks like i'm bad person!
But simply- i've explained that i have 3 abolutely equal phones GT i9505 and other 2 has connectivity and it is all fine with them, also it is written that i have wiped all drivers and reinstall em several times.
Do you think that there are special drivers for third Galaxy s4 ?
pls, don't be rude, and if we was trusting on everything in google....wtf we are doing here ?
agraceful said:
I told you how to fix your problem. And nor I'll kindly tell you to piss off. I'm sick of ignorant people asking dumb questions. Use Google or gtfo.
Click to expand...
Click to collapse
Dude, i don't want to be irrogant or such ! sorry for my bad english or if it looks like i'm bad person!
You didn't told me anything that i haven't tried !!!!
But simply- i've explained that i have 3 abolutely equal phones GT i9505 and other 2 has connectivity and it is all fine with them, also it is written that i have wiped all drivers and reinstall em several times.
Do you think that there are special drivers for third Galaxy s4 ?
pls, don't be rude, and if we was trusting on everything in google....wtf we are doing here ?
Lennyz1988 said:
Download mode is separated from the rom. So no, the rom has nothing to do with usb connectivity while in download mode. Another rom will not fix your problems.
Click to expand...
Click to collapse
There must be button "Thanks 10x"
P.s: I'm sorry for that posts! Though i can delete my previous replies !
Whenever I try to connect my phone to the PC it says "USB device not recognized"
Was thinking about copying some files from the PC to the phone when suddenly it doesn't recognize it. Could it be that the micro USB port on the phone is broken somehow? All I can do right now is charge the phone. Is there something I can work around to fix it on my own or do I have to take it for the repair?
Think you need to get it to the repair. First try another USB cable. Then you can try to get it on the other rom or factors reset it to make certain how it is a USB port & not the software even actually chances for that are slim.
Zola III said:
Think you need to get it to the repair. First try another USB cable. Then you can try to get it on the other rom or factors reset it to make certain how it is a USB port & not the software even actually chances for that are slim.
Click to expand...
Click to collapse
Well, there is no dust in the port and I don't think that it got "weared out" or something since the phone is not that old. I was trying CM 11 and then went to stock to try something out and when I wanted to copy some files to the phone the PC couldn't recognize it. And I flashed the newest firmware from Sammobile with Odin which got out September 27th and it all started after I flashed it. The worst of all I am also experiencing some weird bugs like the wallpaper turning black when I drag apps over to move them to another screen on home which is gone after I reboot the phone. So this new firmware is for sure buggy, and the worst of all I can't get to an older version because the PC can't recognize the phone anymore. Jeez this is screwed up.
EDIT: Okay a bit more digging around on my PC and I found that if I uninstall the driver in the Device Manager that has an exclamation mark when I connect my phone the "connected" sound is played on the PC and it starts installing a driver and then I get the error message. So I guess it's this stupid firmware.
Catsonvi said:
So this new firmware is for sure buggy, and the worst of all I can't get to an older version because the PC can't recognize the phone anymore.
Click to expand...
Click to collapse
.
Shore you can, though sideload. ?
Oh, but how do I do that? I guess it has to do something with the phone's stock recovery or something.
Catsonvi said:
Oh, but how do I do that? I guess it has to do something with the phone's stock recovery or something.
Click to expand...
Click to collapse
Actuality forget it and use FlashFire instead it's more simple.
http://forum.xda-developers.com/general/paid-software/flashfire-t3075433/post59962696#post59962696
Did you try on another PC or with another cable? If you did my bet is that it's not software but broken USB connector on the phone (plenty of those on alk S3's including Neo's).
Best regards.
Zola III said:
Actuality forget it and use FlashFire instead it's more simple.
http://forum.xda-developers.com/general/paid-software/flashfire-t3075433/post59962696#post59962696
Did you try on another PC or with another cable? If you did my bet is that it's not software but broken USB connector on the phone (plenty of those on alk S3's including Neo's).
Best regards.
Click to expand...
Click to collapse
No, I didn't try it on a differrent PC yet but I will. As for this FlashFire thing, it says it's for rooted devices, and my phone right now isn't, since I can't connect it to my PC(it all happened the same day - had CM11 all worked got to stock had UI bugs and PC couldn't recognize it). Is there some way of rooting it without the PC? I tried some apps but none worked even tho some of them did before on older firmware.
Catsonvi said:
No, I didn't try it on a differrent PC yet but I will. As for this FlashFire thing, it says it's for rooted devices, and my phone right now isn't, since I can't connect it to my PC(it all happened the same day - had CM11 all worked got to stock had UI bugs and PC couldn't recognize it). Is there some way of rooting it without the PC? I tried some apps but none worked even tho some of them did before on older firmware.
Click to expand...
Click to collapse
If the KingRoot doesn't work I am afraid that you will have to get a little creative & use ADB over WiFi.
Zola III said:
If the KingRoot doesn't work I am afraid that you will have to get a little creative & use ADB over WiFi.
Click to expand...
Click to collapse
Oh dear. Yes, KingRoot doesn't work, even tho it worked before like a charm. Okay, how do I do that? (I'm sorry but I really never did any of the things you suggested here)
Puff. First of all enable adb & over tcp (wifi) in developer options.
https://dzone.com/articles/use-adb-over-wi-fi-without
Or use some of the apps.
The commands & how to use them.
http://www.androidlegend.com/how-to-use-adb-fastboot-commands-with-your-android-device/
You need to push SU bin & app along with Busybox bin (command extension).
http://androidforums.com/threads/how-to-root-any-android-device-manually.586982/
If this doesn't help you or you don't know how to do it I am sorry but I can't help you more than this.
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
You can push & a older kernel image & then use kingroot if it's easier for you like that...
Zola III said:
Puff. First of all enable adb & over tcp (wifi) in developer options.
https://dzone.com/articles/use-adb-over-wi-fi-without
Or use some of the apps.
The commands & how to use them.
http://www.androidlegend.com/how-to-use-adb-fastboot-commands-with-your-android-device/
You need to push SU bin & app along with Busybox bin (command extension).
http://androidforums.com/threads/how-to-root-any-android-device-manually.586982/
If this doesn't help you or you don't know how to do it I am sorry but I can't help you more than this.
---------- Post added at 12:54 PM ---------- Previous post was at 12:52 PM ----------
You can push & a older kernel image & then use kingroot if it's easier for you like that...
Click to expand...
Click to collapse
I will see if I can do this. If not I can try to connect the phone to another PC or send it to repair if the other PC doesn't recognize it. But then again, thanks.
Suggestion/Help
I do have the same problem but in my case the device is bricked & i unable to debrick it as file is not available.
When ever i connect it to the pc it shown connected to RELINK HS-USB QDLoader 9008 .
what can i do to make it work.
Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap. Tried all the usb sockets on my computer, noting changed. When i try to power up the phone it says: " Firmware update encountered an issue. Please select recovery mode in Kies & try again." Tried 2 different roms and still nothing. Please help, i really need the phone asap
EmiliuxPlayz said:
Hi, i've beet trying to flash stock rom via odin and I always keep getting fail, now i can't use my phone, because it won't boot. I've downloaded the right file for the right model SM-N910C and at the end of the flash i just get fail, i flash on ap. Tried all the usb sockets on my computer, noting changed. When i try to power up the phone it says: " Firmware update encountered an issue. Please select recovery mode in Kies & try again." Tried 2 different roms and still nothing. Please help, i really need the phone asap
Click to expand...
Click to collapse
Where did you download firmware from?
Which did you take (name it)?
Was it multipart or single part ROM?
(probably single as you only named AP slot)
Which Odin version used?
bmwdroid said:
Where did you download firmware from?
Which did you take (name it)?
Was it multipart or single part ROM?
(probably single as you only named AP slot)
Which Odin version used?
Click to expand...
Click to collapse
i am facing the same problem with my Samsung Note 4 SM-N910C
i tried to reflashed it with stock rom. i have tried few stock rom and none of them worked, tried changing the usb slots but no luck. tried using odin 3.07, 3.09, 3. 10, 3.13. phone is bricked now. what to do?
rafayet1159 said:
i am facing the same problem with my Samsung Note 4 SM-N910C
i tried to reflashed it with stock rom. i have tried few stock rom and none of them worked, tried changing the usb slots but no luck. tried using odin 3.07, 3.09, 3. 10, 3.13. phone is bricked now. what to do?
Click to expand...
Click to collapse
Smart Switch for PC maybe?
rafayet1159 said:
i am facing the same problem with my Samsung Note 4 SM-N910C
i tried to reflashed it with stock rom. i have tried few stock rom and none of them worked, tried changing the usb slots but no luck. tried using odin 3.07, 3.09, 3. 10, 3.13. phone is bricked now. what to do?
Click to expand...
Click to collapse
Have you searched that forum?
As you own an Exynos phone while mine is Snapdragon I might not be able to help more.
bmwdroid said:
Have you searched that forum?
As you own an Exynos phone while mine is Snapdragon I might not be able to help more.
Click to expand...
Click to collapse
I tried also
tried with smart switch and i get this error
w41ru5 said:
Smart Switch for PC maybe?
Click to expand...
Click to collapse
bro i tried
@rafayet1159 you didn't say if flashing multiple part stock doesn't work either.
How do you define bricked?
bmwdroid said:
@rafayet1159 you didn't say if flashing multiple part stock doesn't work either.
How do you define bricked?
Click to expand...
Click to collapse
not able to connect it with pc
windows says unrecognized usb. i tried flashing multiple stock files still no luck
rafayet1159 said:
not able to connect it with pc
windows says unrecognized usb. i tried flashing multiple stock files still no luck
Click to expand...
Click to collapse
KIES installed or just SAMSUNG_USB_Driver_for_Mobile_Phones?
If the device manager said unrecognize usb then try to download the driver from Samsung Open Source. If it isn't working, try another cable (you can borrow it from one of ur friends)
bmwdroid said:
KIES installed or just SAMSUNG_USB_Driver_for_Mobile_Phones?
Click to expand...
Click to collapse
already tried
AsrieltheGoat said:
If the device manager said unrecognize usb then try to download the driver from Samsung Open Source. If it isn't working, try another cable (you can borrow it from one of ur friends)
Click to expand...
Click to collapse
tried but no luck
@rafayet1159 checked USB port on device?
Cleaned contacts?
Even if charging is working, data contacts can by dirty.
Different PC not working either?
bmwdroid said:
@rafayet1159 checked USB port on device?
Cleaned contacts?
Even if charging is working, data contacts can by dirty.
Different PC not working either?
Click to expand...
Click to collapse
treid different pc cable cleaned port etc this problem showed up when i tried to flash stock rom after that not able to access my phone anymore
rafayet1159 said:
treid different pc cable cleaned port etc this problem showed up when i tried to flash stock rom after that not able to access my phone anymore
Click to expand...
Click to collapse
Silly question: battery is full?
bmwdroid said:
Silly question: battery is full?
Click to expand...
Click to collapse
yes. i dont know how to fix this problem. not able to use my phone for long time
rafayet1159 said:
yes. i dont know how to fix this problem. not able to use my phone for long time
Click to expand...
Click to collapse
As long as you can't access download mode I don't see a chance.
Perhaps other can help better if you post your question in the special Note4 Exynos forum.
bmwdroid said:
As long as you can't access download mode I don't see a chance.
Perhaps other can help better if you post your question in the special Note4 Exynos forum.
Click to expand...
Click to collapse
Let me try
bmwdroid said:
As long as you can't access download mode I don't see a chance.
Perhaps other can help better if you post your question in the special Note4 Exynos forum.
Click to expand...
Click to collapse
can you give me the link of the forum?