Hello,
First I'm new here and the rule of posting 10 times before being able to post in development section is not to fair I must say.
Well, I would like to try the MIUI based Elite ROM v9.6 Multilanguage 2012-02-01.
I know that I have its recommended to downgrade to a 2.2 version such as U8800 V100R001C00B138SP04(Normal).
We should repeat this downgrad process at least 3 times.
And then what we need to do more?
Should we root it and then install a CWM or I can just install the CWM and boot directly in recovery to install the MIUI based Elite?
Also, which CWM should be used?
Thank you
I dont think it really requires the stock to be installed 3 times, but if you have time, just do it. After it install CWM and flash the rom. no need to root. cwm version 5.0.2.6 works.
Hi,
is there a plan to bring the new Clockworkmod Recovery v6 to the HD2? And if not, what is the latest version of CWM for the HD2? I can find only v3 and it seems weird that noone made a newer version...
Thanks,
FrantiĊĦek Nesveda
Latest stable Version seems to be 5.0.2.6.
You can get it here.
Thank you very much, I appreciate the quick answer.
You can find latest clockworkmod recovery images here https://www.dropbox.com/s/xoio3dwcxwe25dj
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Stevie G said:
Hi guys
I just have a few questions, sorry for being a total noob.
I have the following build JSS15J.N9500XXUBMJ1
I have already rooted by phone with Odin and backe up my stuff.
I want to flash the Bobcat Rom, but unsure which one to use since there is 2 and i am unsure which one to use
[SM-N9005][NOTE3][KitKat 4.4.2][XXUENB4]_BoBCaTROM_EVO_v6.0
[SM-N9005][NOTE3][XXUDMK2]_BoBCaTROM_EVO_v3.0
which is the right one or will either one work, but has different features.
Flash Stock firmware with Odin
==> INSTRUCTIONS TO FLASH 4.2.2 OFFICIAL FIRMWARE <==
4. Flash CWM Recovery kitkat compatible (Thx @Chenglu ==> http://forum.xda-developers.com/show....php?t=2454079)
will the bootloader be upgraded to 4.4?
is it possible to leave the bootloader update?
if so, can i still install the bobcat rom on the stock bootloader?
5. Boot to recovery, and Install BoBCaTROM with Full Wipe
Is it necessary to full wipe the note 3 when installing the bobcat rom?
Thnaks guys and i hope you guys can answer my silly question
Click to expand...
Click to collapse
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Rosli59564 said:
MJ1 means 4.3. Flash v3.0. V4 and above are for 4.4.2 bootloader only.
Clean install is advised to avoid any issue later.
Click to expand...
Click to collapse
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Stevie G said:
thank you for assisting me, but which CWM version should i use. i already rooted the note with CWM v6.0.4.4 (20131011) by Xiaolu
Can i use this one currently on my phone or do i need a later version
Root your device and install a custom recovery... IMPORTANT! flash procedure tested only with latest CWM made by Chenglu.
Click to expand...
Click to collapse
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Rosli59564 said:
6.0.4.4 is fine. I was on twrp when flashed this rom last time, no problem as well
Click to expand...
Click to collapse
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Stevie G said:
Thank you
One last question.
Is Xposed framework and active modules build into the bobcat rom?
Also the same with Wanamaker Xposed?
I also notice that I can flash my own theme in recovery with stock or universal if I am correct.
Does the battery icon have to be done separately.
- Install Xposed framework and active modules (BoBCaTROM Control)
- Choose your Advanced settings by Wanam Xposed
Click to expand...
Click to collapse
Xposed framework provided but can't remember what modules included. You can however download modules from the framework itself.
You can choose whether to install stock samsung theme or bobcat theme.
Og battery mode included with >70 styles
Should I use ROM manager to update my clockwork mod nightly (jflte) on my 19507 or should I just download the new one to my phone and do it manually?
Is it safe to update this on my i9507?
Greetings, i am new here and i am posting this just in case someone gets problem like this and doesn't know how to fix.
If you accidentally tried to install ROM for ZTE Blade III with older Clockwork mod recovery version (i.e. tried to install KitKat 4.4 CM 11 with 6.0.2.7 instead with 6.0.4.9)
Just find older CM version in this case CM 10.1 and install it, it should get you JB 4.1.2 version working and then you can install newer CW version or install back stock ROM.
Hope this helps someone.
Cheers.