Rooting won't work - Continuum General

Hey guys,
Im running the ginger bread leak stock with no mods or anything and I went to go re root my phone last night since I haven't been using root for a while. So I went to use super one click like I normally would and after doing everything super one click says im rooted and then when it asks if I want to run a test and I click yes, the test indicates I am not rooted. And I checked on the phone and I can't get root acess. Could someone help me out so I can root. I really only want to root to remove some annoying ads from an app i use all the time.
Thanks

Jaggar345 said:
Hey guys,
Im running the ginger bread leak stock with no mods or anything and I went to go re root my phone last night since I haven't been using root for a while. So I went to use super one click like I normally would and after doing everything super one click says im rooted and then when it asks if I want to run a test and I click yes, the test indicates I am not rooted. And I checked on the phone and I can't get root acess. Could someone help me out so I can root. I really only want to root to remove some annoying ads from an app i use all the time.
Thanks
Click to expand...
Click to collapse
Questions don't go here.. Download super user first or super su then try the super one click. It should work. Also before you root put your phone in debug mode by going into settings/Applications/Development and enable USB debugging. *usb must be disconnected before enable debug*

Jaggar345 said:
Hey guys,
Im running the ginger bread leak stock with no mods or anything and I went to go re root my phone last night since I haven't been using root for a while. So I went to use super one click like I normally would and after doing everything super one click says im rooted and then when it asks if I want to run a test and I click yes, the test indicates I am not rooted. And I checked on the phone and I can't get root acess. Could someone help me out so I can root. I really only want to root to remove some annoying ads from an app i use all the time.
Thanks
Click to expand...
Click to collapse
There isn't enough room in the system partition for S1C to copy superuser...you have to down load it from the market. And most people have been having better luck with Supersu...but either one will work, just install, start the app, update binary, and have fun! You can then debloat and move which ever one you used to /system/app if you want, but you don't have to.
Sent from my SCH-I400 using xda app-developers app

But superuser.apk does get copied into the system apps and its there.I just can't get the root to even stick it says its rooted but then when I try a rooted app it says I don't have root access
Sent from my Nexus 7 using xda app-developers app

Jaggar345 said:
But superuser.apk does get copied into the system apps and its there.I just can't get the root to even stick it says its rooted but then when I try a rooted app it says I don't have root access
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Oh what you can do is flash cwm with Odin and get the supersu.zip and flash it. Try that then one super click

Jaggar345 said:
But superuser.apk does get copied into the system apps and its there.I just can't get the root to even stick it says its rooted but then when I try a rooted app it says I don't have root access
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hmmm, last few times i've rooted with S1C, it did everything but install superuser. As soon as I downloaded it everything worked fine. Sorry about that, not sure what is going on for you.
Sent from my SCH-I400 using xda app-developers app

Is the super user zip from the super user site?
Sent from my Nexus 7 using xda app-developers app

This is the log I get from Super One click when I try to root:
SuperOneClick v1.7.0.0
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing psneuter...
697 KB/s (585731 bytes in 0.820s)
OK
chmod psneuter...
OK
Running psneuter...
ROOTED
Pushing busybox...
1104 KB/s (1062992 bytes in 0.940s)
OK
chmod busybox...
OK
Getting mount path...
/dev/block/stl9
OK
Reading OS Version properties...
Version: 2.3.3
OK
Remounting system with read-write access...
OK
Pushing su-v2...
failed to copy 'C:\Users\Sean\Desktop\root\su-v2' to '/system/bin/su': No space left on device
OK
chmod su...
Unable to chmod /system/bin/su: No such file or directory
OK
Creating /system/xbin...
mkdir failed for /system/xbin, File exists
OK
Copying busybox (/system/xbin/)...
cp: write error: No space left on device
OK
Pushing Superuser.apk...
failed to copy 'C:\Users\Sean\Desktop\root\Superuser.apk' to '/system/app/Superuser.apk': No space left on device
OK
Pushing Superuser.apk... (/data/app)
370 KB/s (196521 bytes in 0.518s)
OK
Remounting system with read-only access...
OK
Running a SU test...
Test failed!
FAILED
ro.wifi.channels=
ro.product.cpu.abi=armeabi-v7a
ro.product.model=SCH-I400
ro.build.tags=release-keys
ro.build.version.release=2.3.3
ro.build.description=SCH-I400-user 2.3.3 GINGERBREAD EG04 release-keys
ro.product.brand=verizon
ro.product.device=SCH-I400
ro.build.version.incremental=EG04
ro.build.type=user
ro.build.date.utc=1306141680
ro.board.platform=s5pc110
ro.product.name=SCH-I400
ro.product.board=SCH-I400
ro.build.user=teleca1
ro.build.display.id=GINGERBREAD.EG04
ro.build.version.codename=REL
ro.build.product=SCH-I400
ro.build.id=GINGERBREAD
ro.build.version.sdk=10
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Samsung
ro.product.locale.region=US
ro.build.date=Mon May 23 18:08:00 KST 2011
ro.product.locale.language=en
ro.build.host=VZW-07
ro.build.fingerprint=verizon/SCH-I

Good News!
I deleted my folder with the root tools in it. Went and grabed a fresh download from the forums with the newest super one click version and it successfully rooted my device.

Now we have a new problem though I have root acess but super user wont prompt me to allow anything and when I set it to automatically allow it still doesnt allow anything so its basically worthless and not working...

Jaggar345 said:
Now we have a new problem though I have root acess but super user wont prompt me to allow anything and when I set it to automatically allow it still doesnt allow anything so its basically worthless and not working...
Click to expand...
Click to collapse
Download supersu from the google store.

Jaggar345 said:
Now we have a new problem though I have root acess but super user wont prompt me to allow anything and when I set it to automatically allow it still doesnt allow anything so its basically worthless and not working...
Click to expand...
Click to collapse
Did superuser update the binary? I would run S1C again and if it tells you that is already rooted have it run again anyway. Then download supersu from the market and see if it will update the binary.
I had similar problems the first time I rooted eg04...It will work, eventually!
Sent from my SCH-I400 using xda app-developers app

roaddog665 said:
Did superuser update the binary? I would run S1C again and if it tells you that is already rooted have it run again anyway. Then download supersu from the market and see if it will update the binary.
I had similar problems the first time I rooted eg04...It will work, eventually!
Sent from my SCH-I400 using xda app-developers app
Click to expand...
Click to collapse
Uodating the Binary fails at gaining root access every time.

roaddog665 said:
Did superuser update the binary? I would run S1C again and if it tells you that is already rooted have it run again anyway. Then download supersu from the market and see if it will update the binary.
I had similar problems the first time I rooted eg04...It will work, eventually!
Sent from my SCH-I400 using xda app-developers app
Click to expand...
Click to collapse
I downloaded supersu and it as well fails to update the binary.

Jaggar345 said:
I downloaded supersu and it as well fails to update the binary.
Click to expand...
Click to collapse
I cant update the binary because it always fails at gaining root access I tried re rooting when it was already rooting and I tried supersu and it failed as well. At the point I think I am just going to give up, if I wanted to I could flash a debloated deodexed and rooted rom but I am too lazy to have to reinstall all my apps and junk so oh well.

I had the same problem the first time I rooted eg04... Just keep trying every once in a while, for some reason it will just all of the sudden work... I think it took me a day or two before it finally did. Then it works fine... Hopefully
Sent from my SCH-I400

Related

rooting

have you seen that 1 click root an z4root don't really make a full root of our x10s???
I was trying to put some ringtones on the notification folder (inside system/media/audio) but I was unable to do it :S it said I lack of the permissions :S
Still need to crack the shell. Use root explorer or something.
Sent from my X10a using XDA App
crecsky said:
Still need to crack the shell. Use root explorer or something.
Sent from my X10a using XDA App
Click to expand...
Click to collapse
hmmm well i used it and it says that message :/
maybe our root method is working 50%
Did you install Busybox from the Android Market after rooting with z4root? I believe this is what is used to grant superuser capabilities. Root Explorer should allow you to push those files after this.
busybox wouldn't install on mine after i'd "rooted" using z4root.. and now the superoneclick won't work for me either (I've just installed JIT)...
installed busybox and didn't work at all
alankstiyo said:
have you seen that 1 click root an z4root don't really make a full root of our x10s???
I was trying to put some ringtones on the notification folder (inside system/media/audio) but I was unable to do it :S it said I lack of the permissions :S
Click to expand...
Click to collapse
Just use ringdroid if you like to add ringtone or notification sound. No need root. And btw z4root works good for me
Sent from my Xperia X10i (2.1 and rooted) using XDA app
I just rooted mine today. apparently there are a few versions of busybox that don't work as they should. I installed titanium after root. Load titanium, it will tell you it can't get superuser rights but will start anyway. Click the "Problems" button at the bottom of the screen and it will download a reliable version of busybox.
I hope this helps.
smokey14346 said:
I just rooted mine today. apparently there are a few versions of busybox that don't work as they should. I installed titanium after root. Load titanium, it will tell you it can't get superuser rights but will start anyway. Click the "Problems" button at the bottom of the screen and it will download a reliable version of busybox.
I hope this helps.
Click to expand...
Click to collapse
Didn't work for me either. When trying to download BusyBox through Titanium, I get an "install failed". Went to market and downloaded busybox from there but gives me a "your phone is rooted. Could not locate busybox".
I have an X10a through AT&T R2CA016. Do I need to debrand it before rooting?
Narvarr said:
Didn't work for me either. When trying to download BusyBox through Titanium, I get an "install failed". Went to market and downloaded busybox from there but gives me a "your phone is rooted. Could not locate busybox".
I have an X10a through AT&T R2CA016. Do I need to debrand it before rooting?
Click to expand...
Click to collapse
You don't need to debrand before rooting. When you download/install Busybox from the Market, open it and it will give you the option of which version of Busybox you want to install/use, select the one you want and run it. Then you can use Titanium after that.
z4root worked fine on my x10. used superoneclick to apply shell root after that but busybox installed fine before that.
Will z4root work on my 2.1-update1 X10?
I have the Nordic Unbranded version with build No. 20A0504 or something...
I only need root to access the Japanese market, nothing else (don't care about otifications etc).
Will it work then? If I use z4root?
Oh, and it wont mess up my SD card, contacts or battery or anything like that?
alankstiyo said:
have you seen that 1 click root an z4root don't really make a full root of our x10s???
I was trying to put some ringtones on the notification folder (inside system/media/audio) but I was unable to do it :S it said I lack of the permissions :S
Click to expand...
Click to collapse
old post i know....but it works fine for me....had you mounted in R/W mode? it should say R/O at the top if you have. I just copied an mp3 file straight into the internal memory (/system/media/audio/ringtones)
That what I do!
I use a "Flash tool release"
root by installing the z4root
then I i install busybox
and to get full access I install rootexplorer and reamount system to the rw the in rootexplorer
then use the "X10modtool" XDA Tool So Always when i try to change staff in my x10 I just open rootexplorer and re amount
Then use Adb shell and staff
(Work 100% for me)
The reamunting it just does not work when use seus or PPC - the ADB is close in the production version of the SE system
By the way How to turn on the ADB in the SE ?? (permittions)
In summary when you install XDA apps just add rootexplorer and reamount to rw

[ROOT] Stock ICS Leak One-Click Root Tool

Hi all!
First off, I'm new to xda Developers so please excuse me if this is in the wrong forum! I thought I'd post information about a tool I wrote here which roots stock 4.0.3 leak on the A500, A501 and assumingly the A200 too. Its literally one click - just enable USB debugging. "ICS Root" also installs, optionally, FaceLock and Trebuchet (although FaceLock doesn't want to work. It lets you set it up though =P)
Since version 5.0.1 this also now works with the new 0.022.00 leak!
The full post is over at TegraOwners: http://forum.tegraowners.com/viewtopic.php?f=30&t=350
The only real system requirements are Windows (with .Net Framework 4) and an Iconia on the stock 4.0.3 leak. I hope somebody finds this useful its been tested by myself and a couple of TegraOwners users and it works well.
In terms of the technique used, it uses the great Jay Freeman's mempodroid exploit to gain root at which point it mounts /system rw and installs su, busybox and Superuser.apk so no real surprises there. Installing Trebuchet adds that apk to /system/app and installing FaceLock installs the apk to /system/app before installing the pittpatt folder to the flexrom (mounted as /system/vendor). I plan to open source it when all the requested features have been implemented and the code has been cleaned up.
Thanks!
~blackthund3r
EDIT 14/05/2012: ICS Root 7 is out enjoy!
Sent from my A500 using Tapatalk
cwm version?
why would it not work with cwm version?
With this tool does system remain writeable after rooting?
What about flashing CWM with acer recovery installer once rooted? I guess it would screw the bootloader...
lowsum said:
What about flashing CWM with acer recovery installer once rooted? I guess it would screw the bootloader...
Click to expand...
Click to collapse
If you are on the cwm with the HC boot loader it should work as Its Magic will be run..
if you are on the new boot loader as in the full non modded leak.. It will give you secure boot error ..
The new boot loader Blocks its magic.
Thanks
Hey this worked easy. I had to re-install USB drivers and make sure I had the latest from Google. Other then that, hit the button, wait about 1.5 minutes, and it rebooted! No problems thus far! Thanks Again!
JeanBubu said:
why would it not work with cwm version?
Click to expand...
Click to collapse
It would but the cwm one, afaik, is prerooted?
Sent from my A500 using Tapatalk
root doesnt work like its supposed to. i know its only half root due to the bootloader, but terminal emulator flat out says i'm not rooted after this despite sixasis working and titanium backup/root checker both saying i have root and busybox. i'm going to post this on TO as well for you incase you dont check here often.
nifterific said:
root doesnt work like its supposed to. i know its only half root due to the bootloader, but terminal emulator flat out says i'm not rooted after this despite sixasis working and titanium backup/root checker both saying i have root and busybox. i'm going to post this on TO as well for you incase you dont check here often.
Click to expand...
Click to collapse
That's storage cos terminal works for me and running su in an adb shell works great too.
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
# exit
[email protected]:/ $ su
#
Sent from my A500 using Tapatalk
SteamBishop said:
Hey this worked easy. I had to re-install USB drivers and make sure I had the latest from Google. Other then that, hit the button, wait about 1.5 minutes, and it rebooted! No problems thus far! Thanks Again!
Click to expand...
Click to collapse
You're welcome and I'm glad it worked!
Sent from my A500 using Tapatalk
After reading the other post, I have found that I cannot write to the system directory from the device itself. The folder attributes indicate that it is set to write, however File Explorer HD will not let me. I have tried to create a folder in the /system and it will not accept the addition. The strange thing is that Root Check says it is rooted, File Explorer HD accepts putting it into Root Explore, but that is it. It is odd. I will try to reapply the Root to see if that makes a difference.
SteamBishop said:
After reading the other post, I have found that I cannot write to the system directory from the device itself. The folder attributes indicate that it is set to write, however File Explorer HD will not let me. I have tried to create a folder in the /system and it will not accept the addition. The strange thing is that Root Check says it is rooted, File Explorer HD accepts putting it into Root Explore, but that is it. It is odd. I will try to reapply the Root to see if that makes a difference.
Click to expand...
Click to collapse
Please, read the op before bringing this up. This method is for half root, its the only way possible right now on stock leak ics. There is a special script you need to use to mpunt system. You can find it in the stock leak thread, run it in terminal or use rom toolbox and set it as a script to run at boot because rebooting loses write privileges.
nifterific said:
Please, read the op before bringing this up. This method is for half root, its the only way possible right now on stock leak ics. There is a special script you need to use to mpunt system. You can find it in the stock leak thread, run it in terminal or use rom toolbox and set it as a script to run at boot because rebooting loses write privileges.
Click to expand...
Click to collapse
Sorry for offending you and whoever else it did. Thank you for pointing that script out in that post. My intent was to offer a second comment to your assessment..
nifterific said:
Please, read the op before bringing this up. This method is for half root, its the only way possible right now on stock leak ics. There is a special script you need to use to mpunt system. You can find it in the stock leak thread, run it in terminal or use rom toolbox and set it as a script to run at boot because rebooting loses write privileges.
Click to expand...
Click to collapse
I have a better script which I'll be releasing as an update to the root app this morning hopefully. It'll be a terminal command to remount rw.
Sent from my A500 using Tapatalk
New update out!!
blackthund3r said:
I have a better script which I'll be releasing as an update to the root app this morning hopefully. It'll be a terminal command to remount rw.
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse
Version 3 came out this morning
It features some bug fixes as well as a completely new remount menu which mounts /system rw properly on the fly. Tested with a busybox installer app
Enjoy!
Thanks for your tool blackthund3r !
I tried it with the new leak from this morning and it doesn't seem to work anymore
Edit :
Just to be a little more specific, the app says the process was OK and state that the tablet is rooted but the tablet doesn't reboot by itseld and su is not installed. I tried to install su manually but it's unable to find a previous su package on the system.
paugustin said:
Thanks for your tool blackthund3r !
I tried it with the new leak from this morning and it doesn't seem to work anymore
Edit :
Just to be a little more specific, the app says the process was OK and state that the tablet is rooted but the tablet doesn't reboot by itseld and su is not installed. I tried to install su manually but it's unable to find a previous su package on the system.
Click to expand...
Click to collapse
ah okay it appears a completely new leak has been released. It is possible that the mempodroid exploit has been patched up. I'm gonna look into it soon. I can't much tonight - I have school work. I'll see what can be done and what the differences between leaks are.
Sent from my A500 using Tapatalk
EDIT: mempodroid hasn't been patched See ICS Root v3.1
Hi blackthund3r
Thanks for the update 3.1 but could you please fix the problem on your hosting website? clicking on this file send to an error warning.
The other files can be downloaded though.
can someone post a mirror to the 3.1 version? current link is not working.
can somebody also confirm, if i root with this tool, i will be able to reinstall my clockworkmod recovery through 'acer recovery installer' and flash any other cwm rom? or do i have to downgrade to honeycomb 3.01, install iconiaroot for honeycomb and then acer recovery installer?
Gersma,
I'll be able to answer to your question as soon as I'll be able to download this tool and test it.

Chainfire 3D On A500

Hei!
I've just installed Chainfire 3D on my Iconia last night and when I try to install the driver, it show me this error:
CF3D driver
ERROR
Could not write to /system
I'm on root and I don't have any recovery installed
Thanks
Did it ask you to allow root access to the app? Sounds like it did not get proper root access. When all else fails, reinstall.
Sent from my ADR6425LVW using xda premium
mygraine said:
Did it ask you to allow root access to the app? Sounds like it did not get proper root access. When all else fails, reinstall.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Yes, the app ask for root access and I gave him, of course. Let's try to reinstall
[EDIT]= it's the same! It says me that error..
giovandrea said:
Yes, the app ask for root access and I gave him, of course. Let's try to reinstall
[EDIT]= it's the same! It says me that error..
Click to expand...
Click to collapse
A lesson. Root and /System RW are not the same thing.
You need to open your file manager, (ESFile Explorer, Root Explorer, etc), and set your /System to RW
Then install the app again.
MD

Arc Android 4.0.4 Build 4.1.b.0.587

Hey all in UK as ever
Finally my Arc has been updated to the above OS
Came as a complete shock to me as I was going to start looking round for a diff phone but now am on ICS am happier
Slight problem
Previously I had Superuser App and Titanium backup installed and removed the bloatware from my service provider. I tried doing this again once the update was completed but Titanium says it cannot get root access and Superuser is not listing it at all and I cannot add it.
Please help
Have you read the relevant 587 rooting threads, as you've obviously lost root access during the update.
Sent from Myushi
XperienceD said:
Have you read the relevant 587 rooting threads, as you've obviously lost root access during the update.
Sent from Myushi
Click to expand...
Click to collapse
Yeh that looks like what has happened
Just tried rooting again and it failed Titanium will not get root access
Nath316 said:
Yeh that looks like what has happened
Just tried rooting again and it failed Titanium will not get root access
Click to expand...
Click to collapse
You've obviously missed a step then, re read whatever guide to root you've used and try again.
You got arc (lt15i)
Just testpoint, boot a kernel, install root with cwm
Sent from my LT15i using xda premium
XperienceD said:
You've obviously missed a step then, re read whatever guide to root you've used and try again.
Click to expand...
Click to collapse
Well it looks like the Doomlord thing failed
busybox: /system/xbin/zcip: Read-only file system
--- pushing SU binary
failed to copy 'files\su' to '/system/bin/su': Read-only file system
--- correcting ownership
Unable to chmod /system/bin/su: No such file or directory
--- correcting permissions
Unable to chmod /system/bin/su: No such file or directory
--- correcting symlinks
rm failed for /system/xbin/su, Read-only file system
link failed Read-only file system
--- pushing Superuser app
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
--- cleaning
rm failed for /data/local.prop, No such file or directory
rm failed for /data/local/tmp, Permission denied
failed on '/data/local/tmp.bak' - No such file or directory
--- rebooting
ALL DONE!!!
Click to expand...
Click to collapse
I followed each step
Hi Nath,
If you tried to root with Doomlords root toolkit try using DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su instead found here, near the bottom of first post...
http://forum.xda-developers.com/showthread.php?t=1601038
I struggled for a while but this worked first time..
good luck and stick with it..
Onmehedson said:
Hi Nath,
If you tried to root with Doomlords root toolkit try using DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su instead found here, near the bottom of first post...
http://forum.xda-developers.com/showthread.php?t=1601038
I struggled for a while but this worked first time..
good luck and stick with it..
Click to expand...
Click to collapse
thanks for pointing out but this failed also with a read only system error.
suspect it is the carrier
I`m just a novice at this game but I dont see how the carrier could affect root as you flash generic .587 firmware to begin with...
Have a look at this great video and follow it point by point but use the alternative root kit than the one shown, although I didnt run programmes from command prompt like he suggests..
http://www.youtube.com/watch?v=Rjv71b9QcZE
Sorry if you have already seen it.
Keep trying , you`ll get there in the end..
Onmehedson said:
I`m just a novice at this game but I dont see how the carrier could affect root as you flash generic .587 firmware to begin with...
Have a look at this great video and follow it point by point but use the alternative root kit than the one shown, although I didnt run programmes from command prompt like he suggests..
http://www.youtube.com/watch?v=Rjv71b9QcZE
Sorry if you have already seen it.
Keep trying , you`ll get there in the end..
Click to expand...
Click to collapse
Interesting post here saying that 587 cannot be rooted
http://forum.xda-developers.com/showthread.php?t=2105325
May explain why i am having issues
Quite right , .587 cannot be rooted directly. You have to downgrade by flashing an earlier version kernel.
So its...Flash .587 firmware - FLASH .562 KERNEL ONLY - root with DooMLoRD_v1_Xperia-2011-ICS-ROOT-emu-busybox-su - flash original .587 kernel..
Watch the video , all is explained within it ...
SuperUser Fixed
Nath316 said:
Hey all in UK as ever
Finally my Arc has been updated to the above OS
Came as a complete shock to me as I was going to start looking round for a diff phone but now am on ICS am happier
Slight problem
Previously I had Superuser App and Titanium backup installed and removed the bloatware from my service provider. I tried doing this again once the update was completed but Titanium says it cannot get root access and Superuser is not listing it at all and I cannot add it.
Please help
Click to expand...
Click to collapse
Hi I got it fixed by flashing SuperSU, update it, then go into settings of SuperSU and Install , then look for Swotch to SuperUser, it un install itself, then go to SuperUser and update...
All done

[Q] "Your device has been modified. Software updates not available" Unrooted

[Q] "Your device has been modified. Software updates not available" Unrooted
Hi,
I rooted my device with Odin/CF autoroot (still on stock rom)
I now want to get the official update. I've unrooted by using the 'Permanently Unroot' within Super SU. I've cleared the cache partition in recovery. I do not have an SD card.
It still says modified and won't update. Can anyone offer assistance?
Did you delete busybox from /system/app?
jd1639 said:
Did you delete busybox from /system/app?
Click to expand...
Click to collapse
I did not. Where can I find this? Under 'My Files' I can't see system. Also, is this safe?
jblz said:
I did not. Where can I find this? Under 'My Files' I can't see system. Also, is this safe?
Click to expand...
Click to collapse
The problem is going to be you have to be rooted to delete it. It is safe and should have been removed before you unrooted.
jd1639 said:
The problem is going to be you have to be rooted to delete it. It is safe and should have been removed before you unrooted.
Click to expand...
Click to collapse
Rerooted in the same way. Ensured I am rooted (even downloaded Root checker). Navigated to system/app but there is no busybox there :/
jblz said:
Rerooted in the same way. Ensured I am rooted (even downloaded Root checker). Navigated to system/app but there is no busybox there :/
Click to expand...
Click to collapse
Look in the /xbin directory
http://forum.xda-developers.com/showthread.php?p=45301834
jd1639 said:
Look in the /xbin directory
http://forum.xda-developers.com/showthread.php?p=45301834
Click to expand...
Click to collapse
Sorry for being such a pain in the ass but under system/xbin I only have
daemonsu
daemonsu-old
dexdump
su
Nothing busybox related.
I've done a full search using ES File Explorer of my local files - 0 results found for busybox.
This may or may not have anything to do with the update issue but it's worth a try. Sometimes the damensu-old file will remain in xbin after unroot. Next time before unrooting uninstall any play store update to the supersu app then unroot from settings in supersu. After you unroot use es file explorer to confirm that the only file left in xbin is dexdump. Then try the ota update.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Delete all but dexdump.
Sent from my SAMSUNG-SGH-1337 using XDA Premium 4 mobile app
muniz_ri said:
This may or may not have anything to do with the update issue but it's worth a try. Sometimes the damensu-old file will remain in xbin after unroot. Next time before unrooting uninstall any play store update to the supersu app then unroot from settings in supersu. After you unroot use es file explorer to confirm that the only file left in xbin is dexdump. Then try the ota update.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Completed all of these steps. Still saying 'Custom' :/
Sounds like you need to reroot then use triangle away, then use those steps.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
Sounds like you need to reroot then use triangle away, then use those steps.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks. Reading that thread it seems it may not even help. I may just flash back to stock if possible..
I bought the I9505 from Amazon.co.uk - can you please point me in the right direction to what firmware I need?
Google, my friend.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Categories

Resources