How to unbrick device - XPERIA X8 General

If you some time has bricked Your Device and can not get it back. Now i help you to unbrick Your Device.
1. You must have flashtool on Your computer. cant help you With that. Sorry
2. You must have the .ftf firmware. cant help you With that. Sorry
3. Place the .ftf in flashtool/firmwares
4.Turn off Your phone, press the volum Down and Connect Your Device to Your computer With the usb cable
5.Open flashtool and press the button With the Lightning on. Choose flash mode and choose Your firmware. Let it flash and you are done
6. Reboot Your Device and enjoy
If i helped you press the thanks button:highfive:

Well, this is a little bit confusing and wrong
a) you should first open flashtool, select the file you want to flash and wait until the flashtool says that you should connect the device and then connect it
b) while connecting, hold down the back button, not the volume down button

fifo171 said:
Well, this is a little bit confusing and wrong
a) you should first open flashtool, select the file you want to flash and wait until the flashtool says that you should connect the device and then connect it
b) while connecting, hold down the back button, not the volume down button
Click to expand...
Click to collapse
The divece can be Connected all time, because you dont have to do it when the question comes up.
You can hold the volum Down button, not just the back button:victory:

But there is a sticky thread by me which tells you how to unbrick your device..
sent from my phone using hands and brain...

Indeed and there is allways the repair option in pc companion you can use.. if you dont know how or what with flashtools

ThaOdie said:
Indeed and there is allways the repair option in pc companion you can use.. if you dont know how or what with flashtools
Click to expand...
Click to collapse
Yes, but sometimes sonymobile is Down

There is already a thread explaining this.
Thread closed,
YZ.

Related

[Q] Flash Tool says: "Searching for Xperia..."

I have Xperia X8 with Eclair update. When I try to flash with X10 Flash Tool it always says Searching for Xperia... Yes I connected the phone in flash mode by holding back button and conecting with usb, I have usb drivers. Non-gui version says the same. I have tried to flash 1.6 firmware from "Going back to 1.6" thread. Please help me, fast!
please post question at general section
Flash Tool help
Try connecting the phone in flash mode, when the flash tool displays "Searching for Xperia ......"
Solved!
Solved! I just installed some drivers from some site. Yes i know i was telling that i have drivers, just i did not know i have incorrect drivers.
Now i am back to Android 1.6!
Can somebody sugest me way to root my Xperia X8?
Now, follow the Step by Step TUT.
Step by Step TUT
Now Rooted 2.1. Thanks for help.
Next time it should help: http://forum.xda-developers.com/showpost.php?p=9510216&postcount=16
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
SaNTi285 said:
How can I install the drivers?
I've downloaded the files with the i386 and amd 64 files but I don't really know what to do with them.
When the device is on the pc is ok with it but when I'm in flash mode the pc just doesn't recognize it and the flash tool says that it's searching for my xperia.
What can I do?
Thanks, Tal.
Click to expand...
Click to collapse
Download automatic install from this link http://www.akshayy.com/sonyericsson/wp-content/uploads/SE_USB_Driver_installer.zip
Press the thanks button!
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Full instructions.
SaNTi285 said:
I've installed the drivers you gave me and it still didn't work even though the computer recognized it now but still in device manager i have it under a yellow triangle sign.
what can I do now? maybe it's my computer that make the problem?
I'm really getting frostrated about it and don't know what to do.
Click to expand...
Click to collapse
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Still not succeeded with flashing.....
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Explain for Noobs!
thomaszq said:
I am still not succeeded with flashing my x8 to android 1.6 (now having 2.1) so i can root 2.1. I am a really noob, so i hope anyone can help me
What did you mean with yelllow triangle, and where can you download non-gui version? When i open the x10flash.bat i cannot write anything (there is nothing happened when i press 2 or Y.
I hope anyone can help me
(Sorry for my bad English)
Click to expand...
Click to collapse
Yellow trinagle is located in device manager!(just look at other thread)
You can get non-gui version in Bin4ry thread "X10 Flash Tool...and so on"
You need to open x10flash.bat in non-gui folder.(not gui)
velnens123 said:
This should really help!
1. On the yellow triangle right click and select "Update Driver..."
2. Download "Non-Gui" version.
3. Put 1.6 firmware on "firmware" folder.
4. Open "X10flash.bat"
5. Write "2" and press enter.
6. Write "y" and press enter.
7. Select operating system, but DONT PRESS ENTER!
8. Now connect USB to computer, but not in phone.
9. Turn off phone.
10. On phone hold back key and connect phone with USB, but dont relase key.
11. On flasher press enter while holding back key.
12. Relase it when it says "Sending Loader..."
This should fix your problem. This is how I done it!
Click to expand...
Click to collapse
Im still stuck on step 1. The yellow mark still wont disappear no matter what I have tried to reinstall/update the driver.
I have let the wizard to search the internet for correct driver, and I have point it to specific folder with the driver in it, I have tried several versions of the driver that I can find on the net.
I keep getting "the hardware was not installed because the wizard cannot find the necessary software" error.
I can use Flash Tool GUI to root my X8 and to install XRecovery. Those were done successfully. And we are talking same session same day here. Just straight after I rooted the phone and installed Xrecovery, did a backup, then I wanted to flash to 2.1 but then this happened.
Only when the phone is connected to the PC in flash mode.
Can anyone help point me in the right direction?
Forgot to mention: the driver I'm talking about is SEMC signed driver. That is the driver for flashing right? Or have I totally missed this point all together?
I got it working now. It was not SEMC driver that's needed. It should be the gordon's gate driver. For some reason that driver went missing. I have installed SEUS and managed to flash my phone yesterday using SEUS. So definitely it was installed, but disappeared today or sometime after I used SEUS last.

S1Boot error [ ... PHONE NOT SUPPORTED IN THIS MODE ... ] XPERIA SP

Hello,
PLEASE ! HELP ME ! I did something wrong and I set my phone dead ...
Could you help me ?
I downloaded CM 12 for Xperia SP. Then I downloaded TWRP and wiped Systems data. (Here I could did some mistake ...)
I downloaded all drivers and programs for flashing boot-loader to XPERIA SP.
In attachment I added those files which I have been using all this time, but there was no result ...
Testpin is found successfully ...
S1Boot result:
HTML:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
and Sony Xperia phone
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
Waiting for phone ...
PROCEDURE STOPPED BY USER
supported phone was not detected
Elapsed:12 secs.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:8 secs.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:9 secs.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
Elapsed:16 secs.
This: PHONE NOT SUPPORTED IN THIS MODE message makes me CRY : ( !!!
So, do you have correct S1Boot_*.SIN_FILE_SET file ?
Thank you for your future response/answer/solution/help !
vv7v7 said:
Hello,
PLEASE ! HELP ME ! I did something wrong and I set my phone dead ...
Could you help me ?
I downloaded CM 12 for Xperia SP. Then I downloaded TWRP and wiped Systems data. (Here I could did some mistake ...)
I downloaded all drivers and programs for flashing boot-loader to XPERIA SP.
In attachment I added those files which I have been using all this time, but there was no result ...
Testpin is found successfully ...
S1Boot result:
HTML:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
and Sony Xperia phone
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
Waiting for phone ...
PROCEDURE STOPPED BY USER
supported phone was not detected
Elapsed:12 secs.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:8 secs.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
CHECKING PACKAGES ...
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use DLOAD protocol ...
0808010600900000
0D0F50424C5F446C6F6164564552322E30
162001000100
17004001000100E1108800
1801000F43240892D02F0DC96313C81351B40FD5029ED98FF9EC7074DDAE8B05CDC8E1
PHONE NOT SUPPORTED IN THIS MODE
Elapsed:9 secs.
SELECT FIRMWARE PACKAGES
YOU CAN SELECT SEVERAL PACKAGES WITH CTRL BUTTON
Elapsed:16 secs.
This: PHONE NOT SUPPORTED IN THIS MODE message makes me CRY : ( !!!
So, do you have correct S1Boot_*.SIN_FILE_SET file ?
Thank you for your future response/answer/solution/help !
Click to expand...
Click to collapse
Download a suitable firmware for your phone using XperiFirm.
Use flashtool v0.9.18.6 from here to flash it.
Zenith said:
Download a suitable firmware for your phone using XperiFirm.
Use flashtool v0.9.18.6 from url to flash it.
Click to expand...
Click to collapse
Look, I can't boot it anymore even to TWRP + no logo is shown ... is this helps ? Really ... Should I try to search firmware and flash in it and flash it by Flashtool ? How could I do this ? Should I do this:
Disassemble your phone;
Remove battery and connect each golden point on main board one by one to metal shield and attach usb cable.
(TestPoint)
Click to expand...
Click to collapse
Thanks !!
vv7v7 said:
Look, I can't boot it anymore even to TWRP + no logo is shown ... is this helps ? Really ... Should I try to search firmware and flash in it and flash it by Flashtool ? How could I do this ? Should I do this:
Thanks !!
Click to expand...
Click to collapse
You don't need to disassemble your phone.
Just turn it off by holding the yellow button on the back (till you feel 3 vibrations)
I assume you didn't unlock your bootloader.
Here's a detailed instruction on how to flash stock;
_____________________________________
Preparing Flashtool:
_____________________________________
Download Flashtool (v0.9.18.6)
Install
Go to installed folder\drivers (C:\Flashtool\drivers)
Install them (Flashmode, Fastboot, Viskan common)
Restart PC
Turn off phone
Press and Hold vol. down button and connect usb (flashmode drivers will be installed)
Disconnect
Press and Hold vol. up button and connect usb (fastboot drivers will be installed)
----------------------------------------------------------
Click to expand...
Click to collapse
_____________________________________
Flashing stock.ftf:
_____________________________________
Open Flashtool
Click 'Flash' button
Select 'Flashmode'
Locate and select .ftf file
When asks, switch off phone,
Press and Hold vol. down button and connect usb [Green LED will burn]
It'll detect the phone
Leave the vol button
Wait till the process is finished.
----------------------------------------------------------
Click to expand...
Click to collapse
However, if you did unlock your bootloader before,
you can directly fastboot-flash the TWRP.img and get access to recovery.
Welcome.
And you can hit the thanks button instead of saying it :good:
follow this ...
first download latest flashtool , install all drivers neeeded , and then download DoomLords kernel .elf (sorry cant post link , dont have permission yet)
when you downloaded kernel (in .elf format) download costum rom file ( cynogen,candy,aicp,xenonhd,ressurection remix etc) .zip file (for starters i recomend cynogen)
then press vol up and connect usb , when it connect it in fastboot mode click on lighting icon in left-top corner and select fastboot mod
it will show you pop up window , find option under DoomLords menu "Select Kernel for Flash" and when show you pop up navigate to DoomLords kernel .elf file you downloaded in first step and click OK
it will be done in few seconds and then you can disconnect usb cable from phone......
now use other phone ( or card reader) and transfer .zip costum rom file on sd card , put sd card in phone , press power and when phone turn on click vol up all the time until you get into recovery
now make full wipe (data,chache,dalwik), go on install zip file navigate to sd card and find .zip file (use vol up and down for moving up and down , power is like "enter") ...when you find .zip file install it , wait until installation finish , then reboot phone, wait until boot system first time (need few min)....download mini gapps flash it like ROM file
hope i helped you ..... now i brick my phone couple times per day , but there is always solution for problem, just ask for help , or find it by youself
Zenith said:
You don't need to disassemble your phone.
Just turn it off by holding the yellow button on the back (till you feel 3 vibrations)
I assume you didn't unlock your bootloader.
Here's a detailed instruction on how to flash stock;
However, if you did unlock your bootloader before,
you can directly fastboot-flash the TWRP.img and get access to recovery.
Welcome.
And you can hit the thanks button instead of saying it :good:
Click to expand...
Click to collapse
zaxxpp said:
first download latest flashtool , install all drivers neeeded , and then download DoomLords kernel .elf (sorry cant post link , dont have permission yet)
when you downloaded kernel (in .elf format) download costum rom file ( cynogen,candy,aicp,xenonhd,ressurection remix etc) .zip file (for starters i recomend cynogen)
then press vol up and connect usb , when it connect it in fastboot mode click on lighting icon in left-top corner and select fastboot mod
it will show you pop up window , find option under DoomLords menu "Select Kernel for Flash" and when show you pop up navigate to DoomLords kernel .elf file you downloaded in first step and click OK
it will be done in few seconds and then you can disconnect usb cable from phone......
now use other phone ( or card reader) and transfer .zip costum rom file on sd card , put sd card in phone , press power and when phone turn on click vol up all the time until you get into recovery
now make full wipe (data,chache,dalwik), go on install zip file navigate to sd card and find .zip file (use vol up and down for moving up and down , power is like "enter") ...when you find .zip file install it , wait until installation finish , then reboot phone, wait until boot system first time (need few min)....download mini gapps flash it like ROM file
hope i helped you ..... now i brick my phone couple times per day , but there is always solution for problem, just ask for help , or find it by youself
Click to expand...
Click to collapse
THANK YOU GUYS ! I'LL TRY SOON AND REPORT HERE THE RESULT !!! THANK YOU ! I hit Thanks button : )
vv7v7 said:
THANK YOU GUYS ! I'LL TRY SOON AND REPORT HERE THE RESULT !!! THANK YOU ! I hit Thanks button : )
Click to expand...
Click to collapse
Welcome!
:good:

Stuck in RESCUE MODE screen in Huawei p8 lite

Hi everyone!
I think I bricked my phone :crying:
Everytime I try to turn it on I see this on the screen (see pic)
And the worst of all is that my windows laptop doesn't recognize the phone when I connect it via usb, the pc tells me that it's an unknown device and there's an error code 43...
Help me pls!
just press and hold volume up and your phone will restart
cristi.blidariu said:
just press and hold volume up and your phone will restart
Click to expand...
Click to collapse
It's the first thing I did but It didn' work
you must keep press up to 10 sec,i have try this method my self and he work,if is not work,then i suggest you to put i higher version on your sd card and make a force upgrade by press and hold volume button up and down and power button
cristi.blidariu said:
you must keep press up to 10 sec,i have try this method my self and he work,if is not work,then i suggest you to put i higher version on your sd card and make a force upgrade by press and hold volume button up and down and power button
Click to expand...
Click to collapse
I did it but it doesn't work. the phone tells me this everytime:
can you upload a photo with your screen phone were is sow locked?
Fastboot or downloading mode, once your in there you should be able to install a custom recovery if you already did that already go to your computer and find your firmware for your phone online, put it on your sd card and install it from your custom recovery and it should work or a simple factory reset would work IF you DO NOT know what all of this is or how to do it everyone on here should know how to help you
Hostliner said:
Fastboot or downloading mode, once your in there you should be able to install a custom recovery if you already did that already go to your computer and find your firmware for your phone online, put it on your sd card and install it from your custom recovery and it should work or a simple factory reset would work IF you DO NOT know what all of this is or how to do it everyone on here should know how to help you
Click to expand...
Click to collapse
good point
Hostliner said:
Fastboot or downloading mode, once your in there you should be able to install a custom recovery if you already did that already go to your computer and find your firmware for your phone online, put it on your sd card and install it from your custom recovery and it should work or a simple factory reset would work IF you DO NOT know what all of this is or how to do it everyone on here should know how to help you
Click to expand...
Click to collapse
I have the official firmware and everything, I put it all in the sd card and press the up, down and power buttons but it keeps telling me this (see pic) and as I said before my windows laptop doesn't recognize the phone when I connect it via usb, the pc tells me that it's an unknown device and there's an error code 43...
cristi.blidariu said:
can you upload a photo with your screen phone were is sow locked?
Click to expand...
Click to collapse
It doesn't tell me "locked" it only tell my this:
you need to enter in recovery mod and wipe data and cache,keep try by press and hold volume up and power,and you will need to install hi suite on your pc,download this https://mega.nz/#!Pc9zjDYB!X0wTeiFdY-ca70K9tI-b5fYf40LpcVExIEim0Xk9v14 is the adb and fastboot,conect your phone to pc,extract the file an you will find a folder adb,open,press and hold shift and right click,search for open command here it will open a cmd window,now run the command adb reboot bootloader and wait till reboot in to fastboot mod,now run the command fastboot reboot
Download other version of your firmware. Then do a manual installation. An older firmware maybe.
cristi.blidariu said:
you need to enter in recovery mod and wipe data and cache,keep try by press and hold volume up and power,and you will need to install hi suite on your pc,download this https://mega.nz/#!Pc9zjDYB is the adb and fastboot,conect your phone to pc,extract the file an you will find a folder adb,open,press and hold shift and right click,search for open command here it will open a cmd window,now run the command adb reboot bootloader and wait till reboot in to fastboot mod,now run the command fastboot reboot
Click to expand...
Click to collapse
What's the password? the site asks me for a password
HeyAnas98 said:
What's the password? the site asks me for a password
Click to expand...
Click to collapse
try this https://mega.nz/#!Pc9zjDYB!X0wTeiFdY-ca70K9tI-b5fYf40LpcVExIEim0Xk9v14
cristi.blidariu said:
try this https://mega.nz/#!Pc9zjDYB!X0wTeiFdY-ca70K9tI-b5fYf40LpcVExIEim0Xk9v14
Click to expand...
Click to collapse
Okay, I'll try to do what you told me later. Then, I'll tell you if that worked. Thanks!!!
k,good luck
Had the same problem. Try this, switch off the phone and unplug from pc, hold volume down then then plug usb back in whilst holding vol down. Should boot to fastboot mode...if not, you can disconnect phone battery and follow above steps again whilst battery is disconnected.
But sadly the p8 lite didn't have removable battery
I know...which is why I took off the back cover and disconnected the battery from the circuit...
HeyAnas98 said:
Hi everyone!
I think I bricked my phone :crying:
Everytime I try to turn it on I see this on the screen (see pic)
And the worst of all is that my windows laptop doesn't recognize the phone when I connect it via usb, the pc tells me that it's an unknown device and there's an error code 43...
Help me pls!
Click to expand...
Click to collapse
download this version of HiSuite 4.04.301,it has a option of system recovery,all you have to do is to have usb debugging enable and conect your phone to pc via usb cable

Meizu m2 note bricked.

I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.
Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me
Can you speak more clearly?I don't understand.Because my English is not very good.
zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?
Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?
Thank you very much,This is my mobile phone. It's done.Thank you for your kindness.
:○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse
I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)

Can't mount files anymore

Hello, i wanted to mount / into rw but i always have an error, can someone tell me why and how can i fix this ? Thank you.
Here is some screenshots.
Yakia said:
Hello, i wanted to mount / into rw but i always have an error, can someone tell me why and how can i fix this ? Thank you.
Here is some screenshots.
Click to expand...
Click to collapse
Its showing because your device is not rooted. Mounting system requires root previlage in your device.
Root your device and try again.
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Its showing because your device is not rooted. Mounting system requires root previlage in your device.
Root your device and try again.
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
Hum, don't take this bad but, you think i will really try to mount / when i'm not already rooted ?
sltushar said:
Its showing because your device is not rooted. Mounting system requires root previlage in your device.
Root your device and try again.
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
hello again, i think i made a mistake, in my root explorer i tried to put /system on read and now my device is stuck, i can't reboot it, the screen is on and black, the two buttons have light what can i do please help i don't wanna brick it (maybe i already bricked it now) please
Yakia said:
hello again, i think i made a mistake, in my root explorer i tried to put /system on read and now my device is stuck, i can't reboot it, the screen is on and black, the two buttons have light what can i do please help i don't wanna brick it (maybe i already bricked it now) please
Click to expand...
Click to collapse
Listen
Download the mena firmware, and then press and hold power button and volume down button it will force reboot your device, then your phone may get rebooted and go on black screen
Dont worry, take a deep breath and keep patience
And do the following steps
Install OST and follow the steps down here
The instructions will be for OST tool and for mena firmware but you can install Chinese varient too
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file your one could be CNxxxx) and put ur phone into bootloader,
For now what you need to do is connect your phone and keep holding your power button for a while till it switches off your device and leave the button once if it turned of before it get rebooted
It should automatically take you to boot loader or else try this step for 1-2 time again you will surely rebooted to bootloader
Once it boot to bootloader
click next button on OST, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the online update tool again
6. Remember no matter if u replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
Same as above i told once to goto the bootloader by connecting phone and keep holding power button untin it get rebooted and release the power button just after the phone turns off and before it get rebooted.
9. Now it should be connected and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
I know its a long procedure but it will help you
If you can reboot to 9008 mod then tell me about that
I will give u another instructions for that
But first try the above method
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Listen
Download the mena firmware, and then press and hold power button and volume down button it will force reboot your device, then your phone may get rebooted and go on black screen
Dont worry, take a deep breath and keep patience
And do the following steps
Install OST and follow the steps down here
The instructions will be for OST tool and for mena firmware but you can install Chinese varient too
Install OST tool
Now
1. Open ur directory, c:/program files x86/OST and replace the online update tool from there and delete the config file,
AND REMEMBER THIS IS VERY IMPORTANT,
2. Open online update tool from ur directory only, from c:/program files x86/OST only, donot start it from any shortcut created on desktop or from start menu, just start it from its original directory,
if it still gives error about microsoft error warning, try fresh replacing ur online update tool again from the zip
And start the program from there only, once it successfully started
3. Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 file your one could be CNxxxx) and put ur phone into bootloader,
For now what you need to do is connect your phone and keep holding your power button for a while till it switches off your device and leave the button once if it turned of before it get rebooted
It should automatically take you to boot loader or else try this step for 1-2 time again you will surely rebooted to bootloader
Once it boot to bootloader
click next button on OST, now the first time u may stuck on flashing splash file and ur phone could restarted
4. Follow all the same steps again
5. Start the tool again
The tool will surely give u error for Microsoft.net
Dont panic
Close it and replace the online update tool again
6. Remember no matter if u replace the file before error, it will give error for one time surely
7. Replace it again with online updating tool and the start it from the directory
8. Now Click next, then choose the firmware mena, that is
PLE-3320-0-00WW-A02.nb0 ( your one could be CNxxxx) file and put ur phone into bootloader
Same as above i told once to goto the bootloader by connecting phone and keep holding power button untin it get rebooted and release the power button just after the phone turns off and before it get rebooted.
9. Now it should be connected and click next this time your phone will get flashed successfully...if it give error again, then try one more time u will be successfully installed the mena firmware
I know its a long procedure but it will help you
If you can reboot to 9008 mod then tell me about that
I will give u another instructions for that
But first try the above method
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
hello first thank you very much for your answer, but my phone when i plug it to my pc it recognize it as an cd i don't know why
Yakia said:
hello first thank you very much for your answer, but my phone when i plug it to my pc it recognize it as an cd i don't know why
Click to expand...
Click to collapse
For your kind information brother, u just bricked your phone.
Bro please follow the instructions that I provide u
Please follow it carefully
sltushar said:
For your kind information brother, u just bricked your phone.
Bro please follow the instructions that I provide u
Please follow it carefully
Click to expand...
Click to collapse
ok thank you but one question how can ost la recognize my phone if my pc can't do it properly (sorry if i'm maybe pissing you off but i need info i don't wanna mess up) ?
Yakia said:
ok thank you but one question how can ost la recognize my phone if my pc can't do it properly (sorry if i'm maybe pissing you off but i need info i don't wanna mess up) ?
Click to expand...
Click to collapse
Look every step is written, your phone will be recognised once you start ost tool
When u start the tool the ost will ask you to browse the firmware file with .nb0 extension
Then it will ask you to connect the phone
Now connect your phone
Then keep holding volume down and power button together, once your phone get turned off then it will show u that its been booted into bootloader or download mode, click next on ost tool and it will start flashing your device
Thats all
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
For your kind information brother, u just bricked your phone.
Bro please follow the instructions that I provide u
Please follow it carefully
Click to expand...
Click to collapse
hey man ! i'm pretty happy because the situation is clearly better now, my phone discharged today and i putted it in charge the charging logo was here, i tried to power it on but it always boots on twrp recovery what should i do
sltushar said:
Look every step is written, your phone will be recognised once you start ost tool
Click to expand...
Click to collapse
man i just discovered that in twrp's file manager the /system folder only contains a "bin" file, everything in the /system file has been erased, i suppose i only have to get a fresh system file ? and i found out that my phone is recognizing the pc normally now ! so where can i find this fresh system file ?
Yakia said:
hey man ! i'm pretty happy because the situation is clearly better now, my phone discharged today and i putted it in charge the charging logo was here, i tried to power it on but it always boots on twrp recovery what should i do
Click to expand...
Click to collapse
Thats much better now
In twrp you can goto to power option and select download mode or bootloader
Thats all
With download mode you can simply flash your phone using OST tool
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Thats much better now
In twrp you can goto to power option and select download mode or bootloader
Thats all
With download mode you can simply flash your phone using OST tool
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
yes but what i'm supposed to flash ?
sltushar said:
Thats much better now
In twrp you can goto to power option and select download mode or bootloader
Thats all
With download mode you can simply flash your phone using OST tool
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
i just have to get this system file and to replace it
Yakia said:
yes but what i'm supposed to flash ?
Click to expand...
Click to collapse
The firmware, you can not put system files through twrp, you must have to flash the firmware
sltushar said:
The firmware, you can not put system files through twrp, you must have to flash the firmware
Click to expand...
Click to collapse
it will not overwrite the files that are already on my phone ?
Yakia said:
it will not overwrite the files that are already on my phone ?
Click to expand...
Click to collapse
Yes it will but your user data wont be deleted
And you can apply update through OTA with stock recovery menu
And also you will get the oreo update if you do so
Hit thanks button if you find this helpful
Happy flashing
sltushar said:
Yes it will but your user data wont be deleted
And you can apply update through OTA with stock recovery menu
And also you will get the oreo update if you do so
Hit thanks button if you find this helpful
Happy flashing
Click to expand...
Click to collapse
hi, i can't flash or update anything because i rooted my phone and making update will brick my phone : "10.After your phone rooted, you can reboot your phone. DO NOT INSTALL ANY OTA UPDATES OR YOUR PHONE WILL GET STUCK AT STOCK RECOVERY (However I've never tested Magisk on Nokia 6), but I’ll recommend you to disable automatic update in settings."
Yakia said:
hi, i can't flash or update anything because i rooted my phone and making update will brick my phone : "10.After your phone rooted, you can reboot your phone. DO NOT INSTALL ANY OTA UPDATES OR YOUR PHONE WILL GET STUCK AT STOCK RECOVERY (However I've never tested Magisk on Nokia 6), but I’ll recommend you to disable automatic update in settings."
Click to expand...
Click to collapse
Man are you listening or what...
M again telling you follow all steps care fully
When OST tool will ask you to connect your phone then goto recovery mode in your phone and select power option and then select bootloader
When it will be booted to download mode connect your phone to pc and then select next button on OST tool into your pc
Flashing your phone will unroot your phone
Thats all it will start flashing and then you can install all the OTA with stock recovery
If you stuck on any step follow the steps for OST tool that i provided you earlier in this thread
And for OTA you can goto this thread https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
sltushar said:
Man are you listening or what...
M again telling you follow all steps care fully
When OST tool will ask you to connect your phone then goto recovery mode in your phone and select power option and then select bootloader
When it will be booted to download mode connect your phone to pc and then select next button on OST tool into your pc
Flashing your phone will unroot your phone
Thats all it will start flashing and then you can install all the OTA with stock recovery
If you stuck on any step follow the steps for OST tool that i provided you earlier in this thread
And for OTA you can goto this thread https://forum.xda-developers.com/nokia-6/how-to/guide-oreo-follow-steps-t3723776
Click to expand...
Click to collapse
i don't want to lose my root privileges thats the point

Categories

Resources