I have tried for installing new rom by using odin but it got stucked at setup up connection.
And i have also resseted my all ROM data before installing new rom.
So what to do now i m really confused.
How to Get ROM burned through ODIN?
M using SAMSUNG GALAXY Y.
I have tried odin version 1.83,1.84
i have also done all the steps properly which is required during ODIN like close kies,antivirus nd install mobile drivers.
and also booted phone in recovery mode (Home+Power on key+Volume down key)
Plz help me to get out this problem.
First thing.
Which rom you tried to flash ?
Stock or any other?
-------#####"One small step for Muffins, One Giant Leap for Muffinkind."#####---------
reflash with out having pit file..
it may work..
say me which rom do u want to flash
Sent from my GT-S5360 using xda premium
First get too download mode..
Then connect to pc...
Wait for 60 secs and then press up.
It works for me...
**rooting is new for me...and i am noob to root...**
it means u dont have the drivers for ur Y download Samsung usb driver for mobile phones
Sent from my GT-S5360 using xda app-developers app
Related
HI,,
SOME HOW MY USB port IS NOT WORKING ...I HAVE TRIED ALL THE METHODS TO FIX IT ,BUT I COULDN'T AND IT IS NOT DETECTED BY ODIN ..!!
NOW I need to revert back to stock,TO CLAIM WARRANTY ..!!
>CURRENTLY I'M USING JUWE'S JVB ROM.
>I NEED THIS FIRMWARE" I9000DDJP6 " AND AS I ALREADY TOLD I DONT HAVE USB CONNECTION SO I HAVE ONLY ONE OPTION LEFT ,THAT IS FLASH IT THROUGH THE CLOCKWORK MOD RECOVERY ,,,,,,
SO SOMEONE PLZ PROVIDE CWM FILE FOR I9000DDJP6 FIRMWARE..!!!
Do u have access to cement backup
Sent from my GT-I9000 using Tapatalk
Cwm
Sent from my GT-I9000 using Tapatalk
evered78 said:
do u have access to cement backup
sent from my gt-i9000 using tapatalk
Click to expand...
Click to collapse
YES i have the nandroid backup of stock firmware 2.1 in my internal sd card....but i need stock 2.1 kernel to get it working ....
i have the same problem my selfe.. win 7 64bit cant install drivers.. every driver says just "unknown device", if i force install a driver, it comes up with no 10 error.. cant start the device..
i have CF-root 3.1 and docs jvb 2.1, with no usb connection at all...
i had the same problem.. at home and at work i couldn't connect to a pc.. but i connected before on these pc's..
what solved my problem was to connect my phone to a pc where i never connected to.. so without any drivers.. after that my pc recognized it again.
thommy86 said:
i had the same problem.. at home and at work i couldn't connect to a pc.. but i connected before on these pc's..
what solved my problem was to connect my phone to a pc where i never connected to.. so without any drivers.. after that my pc recognized it again.
Click to expand...
Click to collapse
so you are saying the problem lies in the phone, and not on the computer? cause, i have uninstalled the drivers and rebooted.. so it should be as a "new pc"..??
I had to install some drivers that I have downloaded somewhere to make it work. You should start by that
EDIT : was probably those one : http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
carlphilipp said:
I had to install some drivers that I have downloaded somewhere to make it work. You should start by that
EDIT : was probably those one : http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
Click to expand...
Click to collapse
Tnx, I have tried all drivers with the same result.. if I force them,result is "failed to start" error code 10
Sent from my GT-I9000 using XDA Premium App
harish.awe said:
HI,,
SOME HOW MY USB port IS NOT WORKING ...I HAVE TRIED ALL THE METHODS TO FIX IT ,BUT I COULDN'T AND IT IS NOT DETECTED BY ODIN ..!!
NOW I need to revert back to stock,TO CLAIM WARRANTY ..!!
>CURRENTLY I'M USING JUWE'S JVB ROM.
>I NEED THIS FIRMWARE" I9000DDJP6 " AND AS I ALREADY TOLD I DONT HAVE USB CONNECTION SO I HAVE ONLY ONE OPTION LEFT ,THAT IS FLASH IT THROUGH THE CLOCKWORK MOD RECOVERY ,,,,,,
SO SOMEONE PLZ PROVIDE CWM FILE FOR I9000DDJP6 FIRMWARE..!!!
Click to expand...
Click to collapse
I can confirm, that your capslock is working! Well done!
Do you have samsung kies installed? You need that for your drivers
I'm pretty sure you just need the drivers and not Kies. Well I don't have Kies anyway. Have a look for "SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe" ... that's what I used. No crappy Kies.
Call me stupid, but have u enabled debugging mode?
Sent from my GT-I9000 using XDA Premium App
After doing several researches , i found a post in androidforum which almost solved my problem....!!!
http://androidforums.com/samsung-ga...stays-after-usb-disconnected.html#post2028045
after reading this i cleaned my usb port ,,still i cant mount my internal sd card in MY system.....BUT THE GREAT NEWS IS USB WORKS FINE IN DOWNLOAD MODE NOW..!!!
I FLASHED STOCK 2.2 FIRMWARE ,I CAN CLAIM WARRANTY NOW.!!
i hope it will help those who have same issue with the usb..
Tnx,peeps. But still no luck. Same problem on another PC, so it must be a rom/kernel flash ****up..
Sent from my GT-I9000 using XDA Premium App
am i missing something here ??
your phones are working right ? just no usb connectivity ??
easiest way would be : download required ROM, copy onto a external sd card using a card reader (who doesnt own one ?? ) boot phone, copy to internal, boot into recovery and flash the .zip
sounds simple to me
Yea, that's whats odd. Phone works just fine, but no USB Conn. So I can't flash with Odin, or transfer files to and from computer. All happened after I installed cf-root.
Sent from my GT-I9000 using XDA Premium App
Hi,
I'm trying to update my rom using ODIN but my phone is not being recognized when its on recovery mode.
It is working fine when it's powered on normally.
Im running on Creed v2.1
Please help.
Boot in Download Mode not in Recovery Mode.
Need help urgent!!
Guys I am new to this forum and don't know how to start a new thread but i need an urgent solution!
First of all i am using Galaxy Y S5360, and using crees's rom v2.1 and today i did a factory reset and from then i am stuck at boot animation and recovery mode not working it's automatically rebooting & i can't flash it through ODIN!
ankitrulz said:
Guys I am new to this forum and don't know how to start a new thread but i need an urgent solution!
First of all i am using Galaxy Y S5360, and using crees's rom v2.1 and today i did a factory reset and from then i am stuck at boot animation and recovery mode not working it's automatically rebooting & i can't flash it through ODIN!
Click to expand...
Click to collapse
To flash in odin u need to be in download mode
Press and hold home+vol down+power..then it will prompt u to proceed to download mode, vol up for yes..odin will recognise it
Guys, need sum advce on what wil i do,. Im planning to change my sd card from 4gb to 8gb but my doubt is, how wl it be done c0z i already rootd my phone, im realy confuse on how wl it be done, and im using n0w c0stume rom and apps 4 bter per4mance.
Plz help. Advices wud b a great help guys.. Tnx
Sent from my GT-S5360 using xda premium
Sent from my GT-S5360 using xda premium
kentoi me said:
Guys, need sum advce on what wil i do,. Im planning to change my sd card from 4gb to 8gb but my doubt is, how wl it be done c0z i already rootd my phone, im realy confuse on how wl it be done, and im using n0w c0stume rom and apps 4 bter per4mance.
Plz help. Advices wud b a great help guys.. Tnx
Sent from my GT-S5360 using xda premium
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
root will stay root even if you change SD card,
hmm insert new Sd and format it with ur phone, then use a card reader and copy everything in old SD even hidden files, and the copy to newly formatted SD..thats it
And please post creed related issues in the sticky!
Help my Phone stuck in Galaxy y model screen..
The power+volume up+home is not working?
How to fix this?
Is Anybody here encountered it?
After I Apply U.S.S.Rv5 rom it stuck in model screen??
If anyome help i will pay you via PAYPAL.. NOT JOKE! I will pay you..
Go to this thread http://forum.xda-developers.com/showthread.php?t=1465800 , download firmware for your location. Go to thread #2 and follow the steps, and then you will recover your phone.
1st switch off your phone,then start your phone by pressing volume down+menu+power buttons. if your phone shows a warning then relax. you can still flash your firmware via odin mode.
chose your firmware from docky73 thread here forum.xda-developers.com/showthread.php?t=1465800 in that thread u will found how to flash via odin.
i dont need your donation,only one thanks will be enough for me,if u got help frm me.
Its kernel problem flash only kernel restore ur nandroid backup if u created......or flash stock firmware ........ Check dev section sticky thread....... :thumbup::thumbup::thumbup:
Sent from my GT-S6102 using Tapatalk 2
manoranjan2050 said:
Its kernel problem flash only kernel restore ur nandroid backup if u created......or flash stock firmware ........ Check dev section sticky thread....... :thumbup::thumbup::thumbup:
Sent from my GT-S6102 using Tapatalk 2
Click to expand...
Click to collapse
he is not able to go in the rfcovery mode.so how he will restore his backup??,,,,,:thumbdown::thumbdown::thumbdown:
Sent from my GT-S5360 using xda premium
hmahadi98 said:
he is not able to go in the rfcovery mode.so how he will restore his backup??,,,,,:thumbdown::thumbdown::thumbdown:
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
Read My Post .... First flash kernel ..if u created nandroid backup ..restore it.... :good::good:
Thats why reads the instructions carefully
Boot to cwm
Do data wipe and cache
Then flash the rom.zip
Wait till it done (dont reboot)
Choose advanced
Then reboot recovery
Do data wipe and cache again in this stock recovery
Reboot system
Wait till it boot first boot need time
Sent from my GT-S5360 using xda premium
hmahadi98 said:
1st switch off your phone,then start your phone by pressing volume down+menu+power buttons. if your phone shows a warning then relax. you can still flash your firmware via odin mode.
chose your firmware from docky73 thread here forum.xda-developers.com/showthread.php?t=1465800 in that thread u will found how to flash via odin.
i dont need your donation,only one thanks will be enough for me,if u got help frm me.
Click to expand...
Click to collapse
I cant get to Recovery mode and download mode.. Its almost 30mins but nothing happens Im stuck in galaxy y Model Screen?
noscarl said:
I cant get to Recovery mode and download mode.. Its almost 30mins but nothing happens Im stuck in galaxy y Model Screen?
Click to expand...
Click to collapse
if u can't go to download mode,than it is a Hard Brick. you should go to a nearest Samsung customer care or any good servicing center. you can't do nothing to fix your gy,just let them to fix it.
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
---------- Post added at 02:43 PM ---------- Previous post was at 02:37 PM ----------
evanlocked said:
Thats why reads the instructions carefully
Boot to cwm
Do data wipe and cache
Then flash the rom.zip
Wait till it done (dont reboot)
Choose advanced
Then reboot recovery
Do data wipe and cache again in this stock recovery
Reboot system
Wait till it boot first boot need time
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
dude.don't you see, he can't even boot into recovery or in download then how he will boot into CWM??? did u invent any new method??
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
hmahadi98 said:
if u can't go to download mode,than it is a Hard Brick. you should go to a nearest Samsung customer care or any good servicing center. you can't do nothing to fix your gy,just let them to fix it.
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
---------- Post added at 02:43 PM ---------- Previous post was at 02:37 PM ----------
dude.don't you see, he can't even boot into recovery or in download then how he will boot into CWM??? did u invent any new method??
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
Click to expand...
Click to collapse
Why u soo mad
Here the solutions for noobs
Turn on odin mode(pc)
Pull out the baterry from the phone
Connect the phone to pc without baterry then press home,power,vol- (download mode)its calls usb jig mode then when u enter download mode dont even pull the usb just place the baterry and u are good to flash it?!!!!be cool as the owner of the rom thats my responsibility to help user
Sent from my GT-S5360 using xda premium
evanlocked said:
Why u soo mad
Here the solutions for noobs
Turn on odin mode(pc)
Pull out the baterry from the phone
Connect the phone to pc without baterry then press home,power,vol- (download mode)its calls usb jig mode then when u enter download mode dont even pull the usb just place the baterry and u are good to flash it?!!!!be cool as the owner of the rom thats my responsibility to help user
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
+1..
my also stuck like that but solution i did was (if want to install u.s.s.r v5):
go cwm
wipe catch and data
choose install from zip
choose u.s.s.r v5_evan.zip
after installation dont reboot
go in advance
select reboot recovery
than in stock recovery, wipe data and wipe cache
phone will turn on in u.s.s.r v 5 rom
noscarl said:
Help my Phone stuck in Galaxy y model screen..
The power+volume up+home is not working?
How to fix this?
Is Anybody here encountered it?
After I Apply U.S.S.Rv5 rom it stuck in model screen??
If anyome help i will pay you via PAYPAL.. NOT JOKE! I will pay you..
Click to expand...
Click to collapse
hey bro,removed the sd card and the sim from your galaxy y.try if u can go to odin mode.if the odin mode appears flashed it thru odin with stockrom.
evanlocked said:
Why u soo mad
Here the solutions for noobs
Turn on odin mode(pc)
Pull out the baterry from the phone
Connect the phone to pc without baterry then press home,power,vol- (download mode)its calls usb jig mode then when u enter download mode dont even pull the usb just place the baterry and u are good to flash it?!!!!be cool as the owner of the rom thats my responsibility to help user
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
ok,sorry bro... first u told to boot in cwm so i don't understand.
Sent from my GT-S5360 using Xparent ICS Tapatalk 2
I've tried to install Gingerbread 2.3.6 on my galaxy Y using odin but it's stuck at "SetupConnection". I've followed every intructions but still nothing. Can anyone help me?
look my signature,there is a guide/last odin,bla bla,maybe it helps.good luck.
lance26 said:
I've tried to install Gingerbread 2.3.6 on my galaxy Y using odin but it's stuck at "SetupConnection". I've followed every intructions but still nothing. Can anyone help me?
Click to expand...
Click to collapse
INSTALL SAMSUNG DRIVER SOFTWARE OR KIES LATEST VERSION THAT WILL HELP U R COMPUTOR TO RECONISE U R DEVICE
bY
----------------------SS------------------------OO-----------------------------MM-------------------------KK------------------------LL
CALIBAN666 said:
look my signature,there is a guide/last odin,bla bla,maybe it helps.good luck.
Click to expand...
Click to collapse
Hey, your signature pic....How do you do that??!?!?!?!?!
lance26 said:
I've tried to install Gingerbread 2.3.6 on my galaxy Y using odin but it's stuck at "SetupConnection". I've followed every intructions but still nothing. Can anyone help me?
Click to expand...
Click to collapse
Try other USB Port and/or reboot the computer!
Sent from my Galaxy Y - A phone with Small Screen and Big Buttons
I was in same situation few days before-do this:
1. uninstall all Samsung drivers from pc
2. install latest Kies
3. If this all cant help,then conect ur Y to pc nd restart them togeder simultaneously
Works for me-good luck !!!! :fingers-crossed::good:
1. Install the latest Samsung USB Drivers and install...
2. Download the latest Odin from my thread...
3. Flash stock firmware and there you go.....
If u r trying to flash via Odin using a single file it will not work. Flash using multiple files. I too had the same problem.
Sent from my GT-S5360 using xda premium
My cellphone, in a sudden, stoped of be recognized by my pc. I use Windows XP. It happened when I finished the install of CM 7 of percy, the installation was made in cwm. The cell charge normally. Can anyone help me?
U have correct driver in pc?
If have then backup ur Rom Through CWM [if any imp data u have]
Try To Install Stock Rom And Then Connect if phone connected then Install New CM Again
Sent from my GT-S5302 using xda premium
djraje said:
U have correct driver in pc?
If have then backup ur Rom Through CWM [if any imp data u have]
Try To Install Stock Rom And Then Connect if phone connected then Install New CM Again
Sent from my GT-S5302 using xda premium
Click to expand...
Click to collapse
Very thanks guy. I installed all again, from the beggining and now it's working perfectly! The moderators can close this topic.