I have a rooted asus transformer running android 3.2.1, i have flashed clockworkmod but i cant get it to go into clockworkmod to install a new room.
It says it was flashed but then reboots and i have tried to hold volume button down with power but no joy.
Any suggestions?
Sent from my GT-I9100 using XDA
serpicoUK said:
I have a rooted asus transformer running android 3.2.1, i have flashed clockworkmod but i cant get it to go into clockworkmod to install a new room.
It says it was flashed but then reboots and i have tried to hold volume button down with power but no joy.
Any suggestions?
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
There's an app called boot to recovery in Play Store(Market). Install it and press boot to recovery and it will bring you there...
Using the vol and power button sometime a little tricky..
Have that installed but nothing, just reboots as normal
Sent from my GT-I9100 using XDA
serpicoUK said:
Have that installed but nothing, just reboots as normal
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
I think your recovery was never been flashed somehow..
Instead you may try get the recovery installer.apk and use it to install recovery. Next use the boot to recovery app to boot your TF101 to CWM..
Sent from my Transformer TF101 using XDA Premium HD app
Boot to recovery app is the way to go!
Tried that but it just turns off and boots back up but not in CWM
Sent from my GT-I9100 using XDA
how do you know your transformers rooted meaning how did you check it.
Sent from my Transformer TF101 using XDA
sandman7793 said:
how do you know your transformers rooted meaning how did you check it.
Sent from my Transformer TF101 using XDA
Click to expand...
Click to collapse
I used Razorclaw.
I am now having the problem when I reboot my tablet it freezes on the Eee Pad screen and takes a few attempts volume down and power button for it to start correctly.
I am at a complete loss, dont have a clue what is going on
When I press volume down and power i get these commands
Android ww_epad-user bootloader (e) released by ww_epad-8.6.6.19-2011101
Checking for android ota recovery
Skiping android ota checking
checking for RCK.. press key (vol_up) in 5 sec to enter RCK (press volume up and the next line of text appears)
Booting revovery kernal image (nothing happens, should this not take me to CWM??)
Also when I turn the tablet off, it turns itself back on almost instanly this has happened since last night.
serpicoUK said:
W
Booting revovery kernal image (nothing happens, should this not take me to CWM??)
Click to expand...
Click to collapse
Yeah it should take you to cwm if you have one install. What method did you use to install cwm recovery?
What buttons do I press
Sent from my Nexus 10 using xda app-developers app
Hold power and both volume up/down. Choose recovery. Go Hawks!
Sent from my Nexus 10 using Tapatalk HD
Once you get into the recovery screen, you may need to press all the buttons at once (don't hold them) to get to the options. Usually choosing recovery takes you to a red Android.
or you can learn to use adb and simply type "adb reboot recovery"
Correction, it's not all buttons at once, it's actually power and volume up, momentarily once you see the dead android with red exclamation. The blue recovery options will then appear.
Sent from my GT-I9300 using Tapatalk 2
Just download quickboot from the play store. Its much quicker/easier!
Kevhed said:
Just download quickboot from the play store. Its much quicker/easier!
Click to expand...
Click to collapse
Agreed,several apps that can do this for you
But if you don't know how to get into recovery,you should be very careful when flashing anything
Hello, I was on clockworkmod recovery and I accidentley clicked the side load button, i am now stuck on this screen with no way of getting out.
Please help as quick as possible!!
Try holding the power button down for a long time ... 10 secs or more.
Lol
Sent from my Nexus 7 using XDA Premium HD app
Hi to all
I updated my nexus 4.2.2 to 4.3.3 through the ota.
Now i tried to unlock&root with the nexus 4 toolkit(last version 1.6.8)
Never mind what i'm trying to do, when the device trying to get into recovery there is a lying android red icon with: "no command"
I believe this is a soft brick , but the device is working and the android is boot up normally,
I allso tried to press power key and after he was pressed i conitnue to hold him and press volume up, the only thing that happend is
a red light and no recovery menu, i tried every way to use the tool but the recovery isn't back!
Please help me guys!
You are in the future or what?
Sent from my Nexus 4 using xda app-developers app
---------- Post added at 05:03 PM ---------- Previous post was at 05:03 PM ----------
Thibaultvw said:
You are in the future or what?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
And it is stock recovery.
Sent from my Nexus 4 using xda app-developers app
You mean't Android 4.3 and the recovery does this for security.
To access the recovery you have to press volume up and power until it unlocks the menu.
Sent from my Nexus 4 using Tapatalk 4
You didn't read my thread!!!
andyabc said:
You mean't Android 4.3 and the recovery does this for security.
To access the recovery you have to press volume up and power until it unlocks the menu.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
I did press power key and when it's hold I pressed the volume up - it did nothing!
eyalabush said:
I did press power key and when it's hold I pressed the volume up - it did nothing!
Click to expand...
Click to collapse
You have to keep pressing it and holding it until it unlocks.
Mine and the others unlocks fine so yours should work.
Sent from my Nexus 4 using Tapatalk 4
For how long?!
andyabc said:
You have to keep pressing it and holding it until it unlocks.
Mine and the others unlocks fine so yours should work.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
For how long should i press?
I tried 10 times at least, and the result: red light...
eyalabush said:
For how long should i press?
I tried 10 times at least, and the result: red light...
Click to expand...
Click to collapse
Wait, a red light?
Are you on low battery?
Maybe it is either a low battery command, access denied to to too many attempts or incorrect combination.
Try doing the same to the up and down keys followed by the power.
Sent from my Nexus 4 using Tapatalk 4
Battery are full
The battery are full,
I tried doing all the combination , my recovery is dead!!!
any ideas?
eyalabush said:
The battery are full,
I tried doing all the combination , my recovery is dead!!!
any ideas?
Click to expand...
Click to collapse
Pressing the volume up and power key in the same time continuously?
And no I do not mean hold.
Sent from my Nexus 4 using Tapatalk 4
I also have the exact same issue. I never tried entering stock recovery before now and I tried to do it now, after updating OTA to 4.3 and rooting with wugfresh toolkit, 1.6.8. Regardless of how many times I have tried, it just reboots normally and can't access the stock recovery.
aaatoel said:
I also have the exact same issue. I never tried entering stock recovery before now and I tried to do it now, after updating OTA to 4.3 and rooting with wugfresh toolkit, 1.6.8. Regardless of how many times I have tried, it just reboots normally and can't access the stock recovery.
Click to expand...
Click to collapse
So you cannot access the recovery using the bootloader?, if so then it is probably corrupted.
I have the stock recovery image file here which you can flash via Fastboot.
Sent from my Nexus 4 using Tapatalk 4
I imagined the same. The toolkit itself, is giving you the option of reflashing the stock recovery, I think that I will try this at first. The weird thing is that the phone boots up normally, works as it should and is rooted successfully.
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Just looked this up for a customer at my shop and works like a champ. Thank you
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
Excellent. Thanks for that. It was doing my head in.
The question is though will OTA updates still work? And the answer is yes. I flashed back to 4.2.2 and the 4.3 update came through OK. Happy days as I may well pass my N4 on soon and it needs to work 100% for a non tech wife.
aaatoel said:
Actually there was no need to flash anything new. I finally made it to work. When in the "No Command" screen, you have to press the following:
1) Press only the power button first
2) While holding the power button, press the vol up button for a couple of seconds
3) Let go ONLY of the vol up button, while still pressing the power button.
Tested and working!
Click to expand...
Click to collapse
Thank you, i was going crazy
I have a brand new nexus 7 and I haven't unlocked the bootloader or rooted. I'm trying to sideload the kitkat update but whenever I try to boot into recovery it brings up the no command screen in recovery . From there I tried holding power and volume up and it just boots into the same screen that says no command. Is an unlocked bootloader required to sideload or is there something I'm doing wrong?
Did you try holding the power button and just tap the volume up button instead of holding it? Should work, it's what I did and it got me into recovery to finish the side load
Sent from my HTCONE using XDA Premium 4 mobile app
Press a key (Vol+ or power or.. ) and you should see some options to choose. I was hanging at the same point when I was rooting my device...
Sent from my Nexus 5 using XDA Premium 4 mobile app
rexant1 said:
Did you try holding the power button and just tap the volume up button instead of holding it? Should work, it's what I did and it got me into recovery to finish the side load
Sent from my HTCONE using XDA Premium 4 mobile app
Click to expand...
Click to collapse
That's what I needed to do. Thanks. Everything works fine now.