I have a magic my touch 3g
a friend wanted to change rom
now it will not start
leaving only the logo and bypasses mytocuh3g
try doing hardreset does not work
not start the FastBoot
not start the recovery
can not boot anything
if I connect to pc only load
ai lei by doing a repair but could goldcard goldcard need to be put into the phone microSD
any suggestions or manual assistance to help me relive the mobile
excuse my bad English ....
Please do not post Q&A in the development section.
Thread moved
Moderating from my One Xl
Related
I have a dopod p800w and I tried to flash it with Tom_ART_v2.00.02_CB downloaded from here and it is dead. It goes to the initial booting screen and just stays there forever. I have the original ROM from dopod asia and I tried to flash with it thru SD as guided from ur website. When I invoke the bootloader it says searching for sd card and immediatly goes to 3 color bands, then nothing happenes.
I feel like crying now. Can somebody helpme
rranjaa said:
I have a dopod p800w and I tried to flash it with Tom_ART_v2.00.02_CB downloaded from here and it is dead. It goes to the initial booting screen and just stays there forever. I have the original ROM from dopod asia and I tried to flash with it thru SD as guided from ur website. When I invoke the bootloader it says searching for sd card and immediatly goes to 3 color bands, then nothing happenes.
I feel like crying now. Can somebody helpme
Click to expand...
Click to collapse
Try to get the phone into bootloader and flash the orignal shipped rom and for gods sake and for the sake of your expensive handset read the post by our moderator meschle right at the top before even attempting to flash.Hopefully you may retreive it.
My prob is bootloader
the bootloader when invoked says searching for sd card but then it goes to a tri color band display n nothing happenes
does anyone has some advice
is this boot loader can be invoked from desktop using the prog (mtty.exe)mentioned in ur forums (im not IT savvy)
Please help
is ur phone cid unlocked? try t-mob. shipped rom. it helped lot of people
Even I get the t-mob rom how do I flash it? thats my problem
for god sake use search. read wiki. here is at least dozen of threads like yours
I am searching thru forums but no answer
Tried some steps using mtty.exe as advised in forums but nothing happening
Sitting in front of the computer straight 19 hrs but in vein
Its Alive
Hi I would like to inform very happyly My dopod p800w is alive.
Yap managed to restore it with original shipped ROM.
Actually I was trying to flash it from SD card which I couldn't with out knowing I can connect USB cable when it is in bootloader tri color band and straight away start by double clicking the EXEfile of original ROM
After PHsnake told me to search I found this thread http://www.spv-developers.com/forum/archive/index.php?t-469.html
and these instructions
Arc
07-25-2005, 01:12 PM
1)Disconnect from USB cable
2) switch off telephone
3)hold CAMERA key (key on right side of phone)will start in 3 color mode
4)plug in USB cable
5)start ROMUpdateUtility.exe and follow instructions
which I followed in my Dopod P800W and damn it it worked. So happy. Nice to get stuck and find a way out of it. Wish all of u happy Tappings. Thank u
HELLO,
I'M A NEW USER OF THIS FORUM
i HAVE BOUGHT A CINGULAR 8125
WHEN I TURN IT ON IT LOOKS BLOCKED ON THE BOOT LOADER SCREEN
THERE IT IS WRITTEN
IPL 3.08
SPL 2.G4.4PDA
ACTIVESYNC DOESN'T RECOGNIZE IT SO I TRIED IN THE USB MODE TO FLASH A NEW ROM BUT NOT WORKING
WHAT I COULD DO WITH IT?
HELP ME PLEASE
It looks like you've got a G4 device. Read the flashing guide in the upgrading section about how to flash your device. Looks like someone tried to flash a custom rom already and bricked it. Can you get your money back?
Thank you for the answer i will lok in that section
the seller said that the phone was good when he shipped to me but i'm not sure
if i will not solve the problem i think i will go with a legal advice
Usually when you brick a G4 it won't even power on anymore. That's how mine acted when I flashed a G3 ROM to it. If it shows the boot loader screen, you should be able to bring it back by following the instructions on how to flash a G4. A section on recovering is in there.
Hi all iam need original update file for this model:32B magic3g+ SFR france,my phone killed during unlocking and now only blank screen,but phone goes to fastboot mode(mean pc detect it)please all help me to solve this problem.
I think you find more help here
http://forum.frandroid.com/forum/viewtopic.php?id=14158
yes but all this firmwares in link what you gived must be done from MMC card,soo iam need to select it from fastboot mode,but iam cant see anything on my lcd,iam only can make fastboot command from cmd,and it shom my device is connected.actually i think it must be work from RUU updater,because if i start Ruu from another operator it give me error:wrong signature.
If you go to the frandroid forum you can speak french and whith a lot of people with the same engine from you.
And you're not in the good section in this forum...
And for me, the RUU for the SFR engine does not exist.
(sorry my english is very basic)
Mod. edit: not dev related, moved to general
My name is carlos and im new in the forum.
This is my problem. I have an HTC Imagio. I tryied to update it but i fail because my phone wont turn on again. I dont know what can i do because I new in the htc world and I dont know how can I start.
Please heeeeeeelpppppp meeeeeeeeeeeeeeee
when yoy say "fail" what exactly happen....???
The phone wont turn on again T_T
You're not giving a very good explanation, did you attempt boot loader mode? anything else? at the present moment, you're just taking up thread space..
The boot loader mode is the hard reset??? or what is it?? The phone doenst enter on the hard reset (color screen with 3 options)
Moved as this is not ROM Development
Sorry about that, anyone know how i can fix it????
Hi i have a imagio dead. No bootloader load (someone wrote a blackstone hspl) and broke it .. the only thing when i connect on usb it is found as a qualcomm msm smthing. no drivers for this.. looked all over, xda, google. i found some jtag methods... I wrote a Intelpxa for a rw6815 with jmmflaser... but befor trying a jtag method, and/or try to sell it for components, i want to give it another try. Does enyone know how at least connect to mtty(to write wia usb the bl), or write a bl (any) wia usb?
Imagio Bricked
No USB way...
Unbrick a phone just can be made with JTAG tools... See jtagbox.com/riff-jtag-box-owners-unbrick-your-phone/shops-unbrick-bricked-phone-riff-box-owners-list
Hello everyone ... this is my first post on the forum I'm a reprimand in my assistance, a residue in Brazil and a customer trou Imagio HTC unlock the verizon and I just noticed that no longer seems to me he is the one CDMA XV6975 which blotted out and not turned over, but do not have IMEI MEID DEC and HEX as well ... riff bought a box to try and repair it could make you turn it on, no longer leaves the HTC logo and is vibrating, already tried the hard reset recovery mode and nothing continues to vibrate, not boot tried one more rom's not leave 0%. Can anyone help me with this device, because the customer does not come out of my foot.
Thanks to all.
Htc imagio bricked
hello guys, i really need help from u. i bricked my imagio this evening and right now it wont turn on so i don't know if u guys can hlp me with any software to recover it.
I will be very happy to c my imagio is breathing.
thanks for your help may God bless you all.
My t-mobile wiza200 not even goes on boot loader...
Rom upgrade goes on 100% and then my pc restarted... After that my wiza200 was totally dead.. Nopt even goes on boot loader mode...
Wiza200 has g4 rom...
Please help me
any solution to this,,.
How can i get that wiza200 on boot loader mode
help pls!
Posting a question one time is sufficient.
This time you gave more information.
I have had exactly the same thing happen, and I successfully recovered using instructions I found, I believe, in the G4 forum's sticky posts. If I remember correctly, the solution involved getting to the bootloader screen (camera+power) and burning an old ROM called the Wizard Love Rom. But maybe I mis-remember, so please search. Again, good luck.