Database Users

Bricked Note 3 - Now I need help!

Hello, I followed the root guide in this forum, it was successful, then I tried to change the LCD density to 240 and the mobile refused to boot!!
I am downloading a firmware from sammobile.com but still have no idea how to do it! should I use Odin or Kies?

Switch off your Note 3.
Put it in Download Mode (Home Button + VolDown + Power), then press VolUp to confirm.
Plug USB cable to Note 3 and computer.
Start Odin, on the left, you'll see a yellow square with "Com.xx", that's confirm your Note 3 is recognized by Odin.
Extract the archive you dlded from Sammobile, Samfirmware... You must have now a .tar or .tar.md5 file
Put it in the PDA field of Odin
Press Start
Wait until reboot
:good:

why not just flash a pre rooted rom in the dev section. You already have cwm. Can you get to cwm?
Edit
or do what luminouche says. You'll probably have to root again though. Not a big deal.

Thanks everyone! It is back to life now, but I will probably try again with the Screen Density thing.. I cannot stand the 480dpi

I think its very hard to brick a galaxy phone.

nymitma the
elibi said:
Thanks everyone! It is back to life now, but I will probably try again with the Screen Density thing.. I cannot stand the 480dpi
Click to expand...
Click to collapse
Indeed looks so big!

elibi said:
Thanks everyone! It is back to life now, but I will probably try again with the Screen Density thing.. I cannot stand the 480dpi
Click to expand...
Click to collapse
But why such a big change. This isn't the note 2. You went to the dpi you would use for the note 2. Try 340 or 380 instead
Sent from my SGH-M919 using Xparent Skyblue Tapatalk 2

mircury said:
why not just flash a pre rooted rom in the dev section. You already have cwm. Can you get to cwm?
Edit
or do what luminouche says. You'll probably have to root again though. Not a big deal.
Click to expand...
Click to collapse
mine is stuck on samsung logo after boot. I can still access the cwm recovery.
Anything I can do or I have to flash the rom again. And will I lose my data ?

How does it happened? have you flashed anything?
Any way you can reflash ROM, flashing stock ROM won't erase data.

dr.ketan said:
How does it happened? have you flashed anything?
Any way you can reflash ROM, flashing stock ROM won't erase data.
Click to expand...
Click to collapse
I flashed a animation zip file in CWM which I found on xda. There is also a restore framework zip to undo what the animation file did. But I can not transfer that to my phone as its not showing up as a USB drive in my laptop.
Any solutions ? please be detailed as I am new to android.

vikas724 said:
I flashed a animation zip file in CWM which I found on xda. There is also a restore framework zip to undo what the animation file did. But I can not transfer that to my phone as its not showing up as a USB drive in my laptop.
Any solutions ? please be detailed as I am new to android.
Click to expand...
Click to collapse
Try this by using a fat32 micro sdcard.
1. Copy restore to the sd card
2. Insert sd card in phone
3. In CWM flash the restore.
if that doesn't work you will probably have to flash your firmware again.

vikas724 said:
I flashed a animation zip file in CWM which I found on xda. There is also a restore framework zip to undo what the animation file did. But I can not transfer that to my phone as its not showing up as a USB drive in my laptop.
Any solutions ? please be detailed as I am new to android.
Click to expand...
Click to collapse
Give me link to that CWM and btw your ID seems do you have Indian ROM? That will be helpful to me as I do have Indian ROM on my PC (Though i don't have note3 )
---------- Post added at 10:58 PM ---------- Previous post was at 10:52 PM ----------
mircury said:
Try this by using a fat32 micro sdcard.
1. Copy restore to the sd card
2. Insert sd card in phone
3. In CWM flash the restore.
if that doesn't work you will probably have to flash your firmware again.
Click to expand...
Click to collapse
I think better to have a look to script of estore zip,what restore file does do. bcoz if that packed with some files which is not from this device than it won't work. If previous file which he flashed have script to make backup and restore.zip have script to restore same thing then only it will work.

mircury said:
Try this by using a fat32 micro sdcard.
1. Copy restore to the sd card
2. Insert sd card in phone
3. In CWM flash the restore.
if that doesn't work you will probably have to flash your firmware again.
Click to expand...
Click to collapse
Yh I thought of that but I don't have micro sd card now. Will have to go and buy one tomorrow.
Thanks anyways.
---------- Post added at 06:36 PM ---------- Previous post was at 06:32 PM ----------
dr.ketan said:
Give me link to that CWM and btw your ID seems do you have Indian ROM? That will be helpful to me as I do have Indian ROM on my PC (Though i don't have note3 )
---------- Post added at 10:58 PM ---------- Previous post was at 10:52 PM ----------
I think better to have a look to script of estore zip,what restore file does do. bcoz if that packed with some files which is not from this device than it won't work. If previous file which he flashed have script to make backup and restore.zip have script to restore same thing then only it will work.
Click to expand...
Click to collapse
ketan,
http://forum.xda-developers.com/showthread.php?t=2318514
This is the thread from where I got that animation zip file.
And I rooted by following the steps in this thread http://forum.xda-developers.com/showthread.php?t=2460720
Yes I am from India. Delhi to be exact. I just don't want to lose data as I spent a lot of time customizing the phone.

Ok good news is that you can restore fom that zip, bad news is you need SD card, if you can manage that then it's easy.
otherwise
If you knoe adb, you can push file with to sdcard with adb command.
OR
simply flash stock ROM, that won't erase your data but you need to reroot.
Do you have internet access on PC?

dr.ketan said:
Ok good news is that you can restore fom that zip, bad news is you need SD card, if you can manage that then it's easy.
otherwise
If you knoe adb, you can push file with to sdcard with adb command.
OR
simply flash stock ROM, that won't erase your data but you need to reroot.
Do you have internet access on PC?
Click to expand...
Click to collapse
Yes I have internet.
Tell me more about adb
and where do I get the stocks roms from ? Did a google search but could not find anything

I thought i may help you with adb but i think it will me more complicatd and i have to move now, better i am updating here complete details to flash ROM wait 5 min.
and your device is n900 right?
and do you have samsung driver/kies installed?
Anyway i assume you have driver installed bcoz you have rooted already and if device is N900 then proceed this way.
Download indian ROM
http://www.hotfile.com/dl/247398412/38c8161/N900XXUBMI5_N900ODDBMI3_INU.zip.html
Then extract that to get tar.md5 file and flash with PDA tab of odin (same way you have root device)
if you need any guide you can refer this thread post#1 for installation guide.
http://forum.xda-developers.com/showthread.php?t=2442760

dr.ketan said:
I thought i may help you with adb but i think it will me more complicatd and i have to move now, better i am updating here complete details to flash ROM wait 5 min.
and your device is n900 right?
and do you have samsung driver/kies installed?
Anyway i assume you have driver installed bcoz you have rooted already and if device is N900 then proceed this way.
Download indian ROM
http://www.hotfile.com/dl/247398412/38c8161/N900XXUBMI5_N900ODDBMI3_INU.zip.html
Then extract that to get tar.md5 file and flash with PDA tab of odin (same way you have root device)
if you need any guide you can refer this thread post#1 for installation guide.
http://forum.xda-developers.com/showthread.php?t=2442760
Click to expand...
Click to collapse
Okay I got my phone working. I used adb pusher app , found it on xda. Simple to use.
But now my wifi is not working. Its stuck on turning on.
I did a little searching , the issue was solved by flashing a custom kernel.
Can I do that on a stock rom like mine. And which kernel will work with note 3?

There is no custom kernel available in my knowledge on your device.
Make backup and try wiping device otherwise flash stock rom.
And don't flash any other device component on your, you may soft brick your device.
Sent from my GT-N7100 using xda premium

[Q] Issues with ROM install.

Hey all. So I'm attempting to flash "JellyBeans" ROM on my Note 3 N900V. These are the steps I have followed:
1st of all I am rooted.
And I am using Safestrap.
1. Connect your device to your PC via USB cable.
2. Copy the Custom ROM .zip file from your Desktop over to the root of your SD card.
3. Once the .zip file has been copied, disconnect your device from your PC.
4. Turn OFF your device.
5. Turn it back on by holding down Volume Up, Home, and Power buttons together.
6. Your device should reboot into recovery mode.
In the recovery mode, the Volume buttons are used for navigation and the Power button to make a selection.
7. Select Backup and Restore.
8. Select Backup.
9. Hit Yes when prompted and let it backup your device.
10. Once done, head back to the main menu by selecting Back.
11. Select Wipe data/factory reset.
12. Hit Yes when prompted and let it wipe off all the data on your device.
13. Once done, head back to the main menu by selecting Back.
14. Select install zip from sdcard followed by choose zip from sdcard.
15. Choose the Custom ROM .zip file you copied earlier to be flashed on your device.
16. Select Yes when prompted and it should begin flashing the ROM on your device.
17. When the ROM has been flashed, reboot your device by selecting reboot system now.
Once I reboot its starts up "Samsung Galaxy Note 3" and then the screen just goes black and my notification light starts pulsing blue. But nothing happens. I cant turn the phone off or anything. I have to pull the battery out to reset.
Any idea's?

If you're on a retail device, you need to Odin back to stock and root again. Install safestrap. Then have fun being a crack flasher

eh?
bmwh0r3 said:
If you're on a retail device, you need to Odin back to stock and root again. Install safestrap. Then have fun being a crack flasher
Click to expand...
Click to collapse
Ok, I just recovered from safestrap back to my stock ROM. Im back at square 1. But why would I need to run odin back to stock. And then wth is a "crack flasher"?

OK you're using safestrap? Didn't read that. My bad. Are you on mje jb trying to update to the nc2/nc4 KitKat?

bmwh0r3 said:
OK you're using safestrap? Didn't read that. My bad. Are you on mje jb trying to update to the nc2/nc4 KitKat?
Click to expand...
Click to collapse
I'm running Stock atm. Trying to install JB. Everytime I have tried to install a custom ROM on this damn phone I get the same result. I had no issues with my HTC One.

Stock can be jellybean or KitKat. If on KitKat, you can't flash a jb rom

/facepalm
bmwh0r3 said:
Stock can be jellybean or KitKat. If on KitKat, you can't flash a jb rom
Click to expand...
Click to collapse
haha, my bad. Yea im on kitkat. I didnt think it mattered seeing as its a custom rom. Do you have a ROM you would recommend?
running 4.4.2 currently.

Biggins for great theming and a few s5 ported features or delta for stock nc4 themed beautifully. Alliance is great too. Hyperdrive was good. And eclipse is highly modified touchwiz to have aosp features. Here's where the term crack flasher comes in... Flash one and try it. Then try the next. See which suits ya man.
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
And please make sure you Odin the nc2/nc4 kernel recommended by all nc4 Roms. In other words... Follow the directions completely.

bmwh0r3 said:
Biggins for great theming and a few s5 ported features or delta for stock nc4 themed beautifully. Alliance is great too. Hyperdrive was good. And eclipse is highly modified touchwiz to have aosp features. Here's where the term crack flasher comes in... Flash one and try it. Then try the next. See which suits ya man.
---------- Post added at 09:07 PM ---------- Previous post was at 09:06 PM ----------
And please make sure you Odin the nc2/nc4 kernel recommended by all nc4 Roms. In other words... Follow the directions completely.
Click to expand...
Click to collapse
Yea I read about the nc4 kernal somwhere else. I just didnt try it. Guess I forgot. I'll try flashing again tomorrow. Thx for your time.

Its all good man. Glad to help. XDA members are great here.

Having trouble with clockwork mod any help is appriciated

Hello, I have been messing around with clockwork mod recently but I'm having some troubles I'll list them below. if anyone could help me that would be great!
Question 1. Not sure what file to use. I am using a galaxy s4 GGt-i9505 and when I try to install CWM from the app it says jfte and if i click phone not listed it says gt19505 not supported. I'm not sure if this is the correct file to use because I looked on the clockwork mod website and seen the manual install files and found the gt-i9505 files on there. So basically my question is for the galaxy s4 do I flash the jfte CWM file or the gt-i9505 file? If I Google search jfte it says it just another name for the galaxy s4 so I'm not sure.
Question 2.I have had an issue with system ui crashing when trying to install the jfte file through the app rather than through Odin and once it says installed and reboot phone i still don't have Clockwork recovery it still is the original recovery that came with the phone. How do I fix this?
Question 3. Every time I do a backup to my external SD card it puts the date of the backup as somewhere in the 1970s and puts the time to 11pm and then when I try to restore to the backup it says MD5 mismatch and tells me the location where it sent the recovery.log and I can't get any of my backups to restore without MD5 miss match Every time. Does anyone know a solution.
I Am rooted and I am running the latest version of lolipop. Is lolipop compatible with CWM?
Thanks for the help! Shaun.*:good:

Solution: install TWRP instead of CWM. CWM is no longer updated, and certain ROMs won't flash with it. The version you want is jfltexx.

How do I get twrp? Could you link me please? And can it be flashed with Odin?

If you are facing MD5 mismatches it means your backups are probably destroyed.It could be happened because of a bad sd card or (probably) because of a bad , older or corrupted recovery.
Just try to download a recovery from here.
I would suggest you to download a .tar (touch) version (flashable with odin)
If for some reason you cannot flash recovery with odin but (as you said) you have a rooted rom ,you could flash it by terminal or by using adb.In this case just extract recovery.img from the .tar file to your adb tools folder and flash it by using the commands:
Code:
adb push recovery.img /tmp
adb shell
su
dd if=/dev/zero of=/dev/block/mmcblk0p21
dd if=/tmp/recovery.img of=/dev/block/mmcblk0p21
After that you should have flash the recovery to your recovery partition.
---------- Post added at 07:03 PM ---------- Previous post was at 07:01 PM ----------
If you want a twrp recovery instead of a cwm you can download it from here.
You should also take a look here for the lattest version of twrp recovery.
You can find the official release of TWRP for GT-I9505 here.

Thanks for the help what would you recommend? CWM OR TWRP?
And is it true that clockwork no longer updates

Shaun98 said:
Thanks for the help what would you recommend? CWM OR TWRP?
And is it true that clockwork no longer updates
Click to expand...
Click to collapse
Maybe someone make an unofficial build for this device in the future but I think the official support has been stopped.
I would recomend you TWRP as it has adb mode if your rom and download mode goes down.

Official TWRP homepage

N910F Stuck in boot sequence - HELP PLEASE!!!

Hi Guys, I came on here last week seeking advice as my Note4 has always been seriously laggy and slow. I tried resetting to factory etc however still the same. So the advice I got was to root and try another rom.
I successfully rooted my 910F device (confirmed by running test root app). I then downloaded a new rom to try out. In the instructions it suggested that I should be running the respective versions of Bootloader and Modem - which I downloaded from the links in the instructions. I installed both Bootloader and Modem via Odin successfully however now the device just loops in a boot up sequence. I copied the ROM files to the SD card however the when I try and load the rom from there it says that 'Update from external storage is disabled'.
I've downloaded a few other ROMs however they are zip files and I am guessing not designed to work with odin??
Hoping that there is a headache free way of recovering this.
Apologies in advance. I am an newbie with this stuff, really appreciate any help!!!!!
Thanks,
OB

You need custom recovery use TWRP.
Rom needs to be a zip DO NOT UNZIP IT.
From recovery flash the zip.
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
Sorry for the short comment but I just typed a big guide and this useless ****ty xda app said I don't have permission to post. Message to xda fix ur **** useless developers. This app has been buggy as hell since day one.

Zionator said:
You need custom recovery use TWRP.
Rom needs to be a zip DO NOT UNZIP IT.
From recovery flash the zip.
---------- Post added at 09:21 AM ---------- Previous post was at 09:19 AM ----------
Sorry for the short comment but I just typed a big guide and this useless ****ty xda app said I don't have permission to post. Message to xda fix ur **** useless developers. This app has been buggy as hell since day one.
Click to expand...
Click to collapse
Really appreciate the reply.
The modem and Bootloader have already been loaded. So to be totally clear, I need to download an app called TWRP and load the ROM file (ZIP) with that right?
Thanks a bunch, really appreciate the help.
Bests,
OB

To add, the phone is not booting up (stuck in the boot up sequence) so I cant download and install any apps on it? Is TWRP a PC app?
Thanks,
OB

Nope, TWRP is not an App. It's a Recovery. You will find it in the development section. It's an img which you flash via ODIN. After that, you shut down the Phone and reboot via holding vol up + Home + Power. It will Boot you into the TWRP Recovery. from there you can then Install the Roms. They are provided as Zip. Don't Unzip them. Just select the zip to be installed via TWRP.

[Request] Custom recovery for E7 running lollipop

After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks

hashiesh said:
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
Click to expand...
Click to collapse
It will be available soon and could you upload boot and recovery to google drive or devhost.

nepalbiraj said:
It will be available soon and could you upload boot and recovery to google drive or devhost.
Click to expand...
Click to collapse
Uploaded, Check them out & help us giving custom recovery
https://drive.google.com/folder/d/0B_8xPQyhA4WxRHRkNWFZYnZUblU/edit

nepalbiraj said:
It will be available soon and could you upload boot and recovery to google drive or devhost.
Click to expand...
Click to collapse
Thanks a lot ... I tried to reply to your post but unforunately I'm less than 10 posts old
Here are the files
https //) drive.google.com/a/hashiesh.com/folderview?id=0BxgiSTfvJheVYm04MUo5NmdBcDg&usp=sharing
Thanks a lot

Me too. Please make cusTom recovery for e7 running 5.1.1

Waiting for the recovery guys please help!

i tried the custom recovery in this link
http://forum.xda-developers.com/gal...ry-twrp-touch-recovery-sm-e700-t3267563/page5
but after flashing through flashify i got stuck on logo...
my device is E700H running 5.1.1
what should i do to make twrp work?

crimson35th said:
i tried the custom recovery in this link
http://forum.xda-developers.com/gal...ry-twrp-touch-recovery-sm-e700-t3267563/page5
but after flashing through flashify i got stuck on logo...
my device is E700H running 5.1.1
what should i do to make twrp work?
Click to expand...
Click to collapse
Try the lollipop twrp it has been built last night heres the thread http://forum.xda-developers.com/showthread.php?t=3267563
Press thanks if it works for you
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
hashiesh said:
After updating my e700h to stock 5.1.1 i had rooted it successfully using KingRoot
Now I need to flash xposed framework zip file that needs a custom recovery
I tried TWRP for kitkat and it didnt work
I even tried a lolipop compatible CWM for E5 and it was very funny and useless
So can anyone compile any custom recovery for E7 running 5.1.1
Here's the img file of the stock recovery
mega.nz/#!ocoThQ7A
Thanks
Click to expand...
Click to collapse
This recovery will not be funny I swear?here it is https://www.androidfilehost.com/?fid=24369303960682868 and the thread link http://forum.xda-developers.com/gal...recovery-twrp-touch-recovery-sm-e700-t3267563
@duonglam @rahulsajilekha @crimson35th
Press thanks if it works for you.

need help plzz
nepalbiraj said:
Try the lollipop twrp it has been built last night heres the thread http://forum.xda-developers.com/showthread.php?t=3267563
Press thanks if it works for you
---------- Post added at 12:14 PM ---------- Previous post was at 12:08 PM ----------
This recovery will not be funny I swearhere it is https://www.androidfilehost.com/?fid=24369303960682868 and the thread link http://forum.xda-developers.com/gal...recovery-twrp-touch-recovery-sm-e700-t3267563
@duonglam @rahulsajilekha @crimson35th
Press thanks if it works for you.
Click to expand...
Click to collapse
how to falsh .img using odin ??

Hatem hesham said:
how to falsh .img using odin ??
Click to expand...
Click to collapse
You can flash it with the app Flashify or I have just uploaded the odin flashable zip . So that it can be flashed directly. I suggest to use the odin method.

it keeps rebooting into recovery
nepalbiraj said:
You can flash it with the app Flashify or I have just uploaded the odin flashable zip . So that it can be flashed directly. I suggest to use the odin method.
Click to expand...
Click to collapse
I installed the recovery using odin
whenever I want to restart my mob. it keeps rebooting to the recovery menu ??!!

what do i do?
this is my 2nd attempt
i reflashed my stock rom then flashed the cfroot and then the img file and i get recovery loop
which part did i do wrong? i did the reflashing of stock cuz i was expecting that it would go smoothly with freshly flashed stock rom

Hatem hesham said:
I installed the recovery using odin
whenever I want to restart my mob. it keeps rebooting to the recovery menu ??!!
Click to expand...
Click to collapse
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
crimson35th said:
what do i do?
this is my 2nd attempt
i reflashed my stock rom then flashed the cfroot and then the img file and i get recovery loop
which part did i do wrong? i did the reflashing of stock cuz i was expecting that it would go smoothly with freshly flashed stock rom
Click to expand...
Click to collapse
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.

it worked !!
nepalbiraj said:
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
Click to expand...
Click to collapse
thanks very much for ur help ... it finally worked

it worked ... thanks a lot ! looking forward for more mods

Hatem hesham said:
thanks very much for ur help ... it finally worked
Click to expand...
Click to collapse
You are most welcome:victory::victory:
---------- Post added at 02:57 PM ---------- Previous post was at 02:53 PM ----------
crimson35th said:
it worked ... thanks a lot ! looking forward for more mods
Click to expand...
Click to collapse
You're welcome. Good to hear that it works for you Press thanks.

nepalbiraj said:
It looks like a bug. Meanwhile you can try to flash stock recov again and do it all over again. This time flash the twrp with odin and uncheck auto reboot and reboot it manually.
And avoid rebootinh to recovery from the system. Boot to recovery only through the hardware buttons. (3 button combo) volume up+home button+power button.
And the restart button is volume down+power long press it.
---------- Post added at 01:55 AM ---------- Previous post was at 01:52 AM ----------
Reflash twrp with auto reboot option off. Follow the instructions I gave to hashem.
Click to expand...
Click to collapse
Sorry for replying here, I'm still below 10 posts so I cant reply to your original post
First: no words are enough to thank you for you effort. It's working and really amazing. Thanks a lot
But I noticed something: when I tried to flash a rom that I have just created, I got an error message "This rom is for e73g while this device is e5lte" I dont know whether this is a problem in my device or it's recovery related
BTW I'm trying to create a deodexed debloated stock rom
Thanks again

hashiesh said:
Sorry for replying here, I'm still below 10 posts so I cant reply to your original post
First: no words are enough to thank you for you effort. It's working and really amazing. Thanks a lot
But I noticed something: when I tried to flash a rom that I have just created, I got an error message "This rom is for e73g while this device is e5lte" I dont know whether this is a problem in my device or it's recovery related
BTW I'm trying to create a deodexed debloated stock rom
Thanks again
Click to expand...
Click to collapse
Thanks for thanking me??hashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.

nepalbiraj said:
Thanks for thanking mehashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
Click to expand...
Click to collapse
Thank you for your information, I found the 3 lines of "asserts" but i'm trying to set the assert to "e5lte" and will update you if it worked.
Sure I will upload it and it will be the first time to upload a rom after years of modifying stock and custom roms without even creating a flashable zip file
I'm planning to create 3 roms
1. Stock deoedexed deknoxed rooted with busybox
2. same as 1 but debloated (I consider all samsung apps to be bloatware)
3. Will try to replace samsung core apps with google ones from stock nexus gapps
so wish me luck and remember that all these are thanks to your TWRP

nepalbiraj said:
Thanks for thanking mehashiesh.
This is not the problem of the device nor recovery. In the META-INF folder in the Rom zip there is a file names UPDATERSCRIPT. Open it in notepad++ or any other tool and remove the first 3 lines.
There should be something written assert. It checks the device name.
So remove it and you are good to go.
Attach or share the updaterscript here so that we can look at it.
After success you can share the ROM in here.
Click to expand...
Click to collapse
please check this
http://forum.xda-developers.com/galaxy-e-series/development/dev-e700h-stock-deodexed-t3293510