[Q] Nexus 7 connectivity issue on home wifi - Nexus 7 Q&A, Help & Troubleshooting

I have encountered an issue with the wifi connection on my nexus 7. When I go to connect to my home wifi, it claims that I have a link speed of 65 mbps, and yet it proceeds to either 1.)stop in the connection process after it gets to "obtaining ip address" and then it stops trying to connect and says"saved" or 2.) after several attempts it occasionally does connect and the connection speed is ridiculously slow (250kbps when compared to about 20-30 mbps on other devices). I encountered this problem some two weeks or so after the device's purchase. Before then I had no difficulties whatsoever. It was around the two week point when the connectivity got really slow and I had difficulties connecting. When I got the device it was running 4.1.2 jelly bean and since then I have updated to 4.2.1 jelly bean and this has not helped. I would greatly appreciate any suggestions as to why my connection is so slow and what I might do to fix this.
Additional information
My nexus 7 is running a stock rom, unrooted, locked
It is the 32gb model
My router is secured with wpa2
It will connect to other networks (including other networks with wpa2 security), it is only my default network which has a problem
Once again any input is appreciated and if you have any other questions please do not hesitate to ask

I had wifi issues several days ago (I'm into my second week since I bought it), with extremely low speeds or shoddy connectivity.
A couple of things I did:
1) Installed Wifi Analyzer from GooglePlay.
2) Using Wifi Analyzer, I figured out a wifi channel which wasn't so heavily used in my apartment (there's about 20 hotspots around me). 1, 6, or 11. I now use 11. This didn't work, but it might for you. Even if it doesn't, it's probably a good idea to set it to the least used channel anyway.
3) I reset my modem to factory settings and reconfigured everything. This fixed my speed and I now have 20-30Mbps consistently. What was different to my original configuration was two settings, which are disabled by default: Block Port Scan Detection and Block IP Flood Detection. Seems like I had inadvertently set these to enabled when I first got my modem. This might be the 'real' fix, but I'm not a networking expert. Maybe just resetting the modem fixed it for other reasons.
My current modem settings:
Mode: 802.11n 2.4GHz
Radio Band: Wide - 40 MHz Channel
Standard Channel: 11
Security: TKIP + AES
SSID Broadcast: Open

Related

Hanging Wifi Problems on HTC Dream

ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
pvanbrakel said:
Hey,
Iam wondering, after flashing tomal 8.7, I have the same problem as you with my universal. Did you found any solution?
Pieter
Click to expand...
Click to collapse
Chek on Universal forum, there are some guuys with the same problem
But a hard reset should help
Don´t forget to vote!
KPeriod said:
ISSUE
Every 3 - 5 minutes while browsing, my wifi will "hang" (timeout when trying to access sites). Note: it doesn't disconnect, the wifi icon is still there as if I was connected, it will just timeout any requests.
TEMP FIX
Reconnecting will fix the problem until it occurs in another 3 - 5 minutes.
VERIFICATION
This is not an issue when using my device on my friend's home WIFI connection.
WHAT I'VE TRIED
Updating my Linksys WRT54G Ver. 2.0 router to the latest firmware.
Switching from WEP to WPA (TKIS) encryption.
Trying different wireless frequencies (i.e. different channels)
Manually setting MTU to 1500 for my broadband connection
Resetting router & Modem
Setting a static IP on my phone (only wifi settings I can change on my phone).
COMMENTS
I think switching from WEP to WPA (TKIS) sped up my connection (but didn't fix the hanging). I didn't do enough testing to verify this but I ran 4 speed tests (1 with WEP then 1 with WPA then one with WEP then one with WPA) and in all occasions with WPA (TKIS) encryption my speedtest results were nigh twice as fast as the results when using WEP encryption. Odd...?
This isn't an issue on my laptop when using my WIFI connection, however, that doesn't say much since I likely have a much better receiver in my laptop (an Intel wireless N card) and it's not to say my laptop gets a perfect connection (I can't play Team Fortress 2 on WIFI anymore because of lag spikes - need to play with wired connection), but it just doesn't have this hanging problem.
If anyone has any ideas of other things I could try to get this working I would greatly appreciate it.
Thanks.
Click to expand...
Click to collapse
have you solved the problem?
i have the same same issue with modem-router wifi Sitecom wl
Every 3 - 5 minutes while browsing, my wifi will "hang"
it doesn't disconnect, the wifi icon is still there as if I was connected,
if you had solved can you tell me how fix it?
Bye
Hi,
It looks that I've got the same issue as you have - the connection is still active (at least, the icon shows that), but after a couple of minutes, I cannot access any website.
Did you guys find any solution to this problem?
thank you very much
Ive had that problem with a few routers(i know the answers late, but maybe it will help someone at least). I had to disable the routers firewall. Once that was done, no disconnects. Weird.

Major WiFi connection issue

Hi
I've had a search in the forums but haven't seen any other posts re. this but wondered if anyone had any ideas?!
Basically I'm having problems connecting to some networks with my Tab 10.1 (stock, updated OTA to the latest TouchWiz UX last week).
I first had a problem last week when I took the device into work - there's an 802.1x EAP network there but it wouldn't even show up in the network list. My SGS2 connects to it without an issue.
Then when I got home tonight (after happily using it at my parents' house during the day) I found it wouldn't connect to my home WiFi (hidden SSID, WPA2). It had connected to this network fine in the past, but now was just sitting showing it as 'not in range' network. At first I thought it might be a router issue (it used to be a little flaky), but then I saw that my iPod and SGS2 were both connecting and working on it without a hitch.
I couldn't see the network at all in WiFi Analyzer (similarly to at work), although it was showing my neighbours' WiFi networks fine. I tried deleting the saved entry and telling the router to broadcast the SSID but it still wouldn't work.
I then put on my WiFi hotspot on my SGS2 (also a previously remembered connection) and it worked absolutely fine!
Does anyone have any ideas where to go next apart from doing a full reset? (which although not the end of the world would be quite a pain).
Thanks for any suggestions/tips!
OK, bit the bullet and restore my device to factory settings - it STILL can't see my home WiFi, despite my SGS2, laptop and iPod all connecting to it fine. It is however showing up two networks belonging to neighbours and also my SGS2 if I put it in WiFi hotspot mode!
Any suggestions folks??
Sounds like a route issue, did you reboot the router? Is the router on a channel below 12?
Hi thanks for the reply!
I actually just spotted a post at http://www.thegalaxytabforum.com/index.php?/topic/5511-my-wifi-no-longer-works/ with the same issue.
It looks like Samsung have mucked something up when they made the Touchwiz UX update - it now blocks WiFi channels 12 upwards, when the old stock Honeycomb firmware didn't do this. I'd moved my router onto 13 to reduce congestion and I guess the work one must be on 12/13 too.
I can see from the table at http://en.wikipedia.org/wiki/List_of_WLAN_channels that 12/13 are only allowed under low-power conditions in the USA, but this isn't the case elsewhere so they shouldn't have locked it down outside of the USA.
This also happend to me
pwhooftman said:
Sounds like a route issue, did you reboot the router? Is the router on a channel below 12?
Click to expand...
Click to collapse
As I had setup an additional router in my house (with assigned a high numbered -or so i thought- fixed IP address) for some reason my main router tryied unseccesfully to assign the same IP to my SGT as the router. This had obviously conflicts and could not log in.
Went into the router eliminated the fixed IP address and voilá! it got working again, all IP a dinamic!!
Regards

[Q] Kit Kat Wifi Issues

With 4.2.2 I had no issues with wifi and can still go back to that version and have no issues, but with version 4.3 and 4.4 I have had and still have the following problem.
I have a list of known wifi connection points as well as available access points. Everything appears as it should, but the wifi will not automatically connect to any wifi (protected or unprotected/known or previously unknown) without first turning the wifi off and back on. Additionally, this only works if the persistent background wifi option is toggled off. If I do toggle the wifi on and off and connect to an available access point everything is fine so long as I remain in range and stay connected. If I go out of range and lose the connection, when I next reenter the range and the access point shows up on the list it will not connect unless wifi is cycled on and off. This happens every single day at work and home, although there is a workaround, it is quite annoying to have to cycle the wifi off and on. The networks will show as available and if I click on them and try to force it to connect, it still won't work unless I cycle on and off.
I have seen prior threads with this issue on 4.3 and there was a topic in the official Google issues page and was frankly hoping desperately that 4.4 would fix it, but alas, it has not. I know it is not the device itself since reverting back to 4.2.2 solves the problem.
Does anyone know of a permanent fix to this wifi issue that doesn't involve reverting to an older version of android or some kludged together solution?
Ya.. I have also been facing this problem since i have installed KitKat 4.4 on my i9300
Are you stock? Maybe try another ROM? I had the exact same problem, but my problem was my wifi AP.
1- My router was setup for a/b/g/n, I set it to only what I really had using the Wifi AP, which was g/n
2- I had a weird cable modem to router to Wifi AP setup. The router was handing out IPs, not the Wifi AP. I removed the router and only let the Wifi AP give IP addresses (DHCP). It seemed like the "further hops" away that the DHCP addresses were, the more issues i had with my Android connection.
No other devices on my network had these issues, but doing the above made a world of difference.
All that made my connections lightening quick, no issues at all since then.
odd Wifi behaviour
I got a refurbished delivered N10 last evening, came with 4.2.2, played with it a little, did a network benchmark test (FTP off a LAN NAS) and was getting comparable peformance to my other fastest system (a Thinkpad Ubuntu laptop). It seemed stable but I only used it for like an hour as 4.2.2. I was getting FTP of max 4MB/s over a N-router.
I then let it OTA to 4.3 and then played with it for some hours. Issue I found was the Wifi would work and then have "authentication problem" I had to turn Wifi off then on to make it connect to router. I've had that issue with other devices at times. I was thinking of staying on 4.3 to allow 4.4 to have another bugfix (its not been long out on N10) but I had a key issue for me (PPP Widget didn't work) so I did a stock 4.4. flash upgrade.
On 4.4. the Wifi speed is still fast, but periodically it just stops working, a glitch.
One key thing that stands out is the N10 is connecting at much higher Mbit speeds than any other of my devices, it is showing 130Mbits vs say 20-65Mbits on other devices. I'm wondering if my N10 is "too good" for my router an old low-spec refurbished model (Cisco E1200 v2, which I flashed to latest DD-WRT) ?
I'm not so far disappointed with network performance, just network stability, but I can't tell for sure if its the N10's fault or my router's fault. I'll play with settings a while til I find something stable.
When I first got my N10 I had a lot of trouble with wifi connection. Mostly authentication issues, or it would authenticate but not have internet access. It was frustrating, and Google's support was clueless.
I then tried using wireless tether from my N4 and it worked as it should. The issue ended up being the Arris router that Time Warner uses. I bought a Linksys router and have had 0 issues since. So if you're using an Arris router, or it shares the same chipset, that might be the issue.
The router is the Arris DG860.
Ichiban Rei said:
When I first got my N10 I had a lot of trouble with wifi connection. Mostly authentication issues, or it would authenticate but not have internet access. It was frustrating, and Google's support was clueless.
I then tried using wireless tether from my N4 and it worked as it should. The issue ended up being the Arris router that Time Warner uses. I bought a Linksys router and have had 0 issues since. So if you're using an Arris router, or it shares the same chipset, that might be the issue.
The router is the Arris DG860.
Click to expand...
Click to collapse
Good anecdote.
Well in our house, the proliferation of gadgets has changed progressively to a large number, I make it 14 devices from an initial 2 devices 5 years ago. I count 4 wired and my 4 devices, my son's 2 and my daughter's 3 and my wife's 1. They all compete for router bandwidth, Wifi spectrum, router CPU / cache.
What I might do with this high-performance (capability and demand N10) is segment my network using an old G router I hard fix to non-overlapping channels from N-router, and connect the low-spec devices to the G and high-spec to the N. That will involve no $ and naturally reduce congestion. I run a NAS and download media to it and then stream to gadgets off NAS so I'm Wifi-limited often more than Internet-limited, and even tweaking I get 2MB-4MByte (16Mbit~32Mbit) off a NAS is making my typical LAN speed the same as the Internet bandwidth I buy (16Mbit).
My NEtbook (EEE 1015PN) if it ever felt a Wifi hiccup it would lock-out that frequency and so not see the router til I powered off netbook and remove battery.
I do wonder if some of the N10 Wifi complaints are really just generic or bad combinations with router or "straw that broke the camel's back".
I'm having wifi issues with my N10 as well. I had a few wifi issues at work, but not at home while using 4.3. Now with 4.4 I'm having serious wifi connection issues both at work and at home. In fact my N5 running 4.4.1 is having issues connecting to wifi both at work and at home. Not as often as my N10, but it still happens. I'm running stock on both and have no problem connecting to either network with my laptop.
I've installed wifi fixer, but so far it doesn't seem to be helping much. Does anyone have any suggestions on what might be done to fix this that doesn't involve rooting either device?
I'm now running 4.4.2, and I'm experiencing better wifi connectivity, but it still drops out more than it did on version 4.3. Is anyone else having this issue?
Sent from my Nexus 10 using Tapatalk 4
droidfan77 said:
I'm now running 4.4.2, and I'm experiencing better wifi connectivity, but it still drops out more than it did on version 4.3. Is anyone else having this issue?
Sent from my Nexus 10 using Tapatalk 4
Click to expand...
Click to collapse
I'm in the same boat, more drops in 4.4.2 than on 4.3 and I'm running stock
same here...waiting for a fix
experiment with the router
metzner said:
same here...waiting for a fix
Click to expand...
Click to collapse
Some of your problems might be just coincidence, something changed in your area around the same time as you upgraded. Some of these are just the wrinkles of firmware of device vs firmware of router, some combinations work bad and isn't really "fault" of Android in that you can't test every combination. You could wait for a fix from Android... or just try to avoid the wrinkle by changing settings on the router. A common thing is to move the router from auto to fixed channel and fix to 20mhz narrow. Go the place you mostly are with the N10 and use a Wifi analyser to find the least-congested channel and then set the router to that. What that does is reduce channel-hopping and gives less opportunity for firmware issues on both router and the Android device.
I also had a problem with my N7 when I moved house. The answer was to flash DD-WRT on my router and the problems went away.
So either wait+complain or go look at your router now.
Right now I have DD-WRT on an old refurbished Cisco E1200 and I set it to channel 3 with 20mhz and I got very good Wifi performance. With the stock Cisco firmware I was getting Android Wifi drops and poor performance. Yes, that's partly Android's fault but I fixed it myself quicker flashing firmware on the router.
I also took opportunity in DD-WRT to setup IPTABLES for a transparent proxy so all the devices in my LAN now share a large harddrive as http cache so e.g. any downloads from Play store for say my N4.... is cached to my N10 so I only ever download anything once.
If you have issues still with the N10, then what I find solves a lot of problem is do a stock flash of 4.4.2, on setup untick all the backup+restore from Google, then manually install and configure yourself to make it "vanilla". That often fixes accumulated wrinkles unique to your history of your device and places to more mainstream with less likely of having a unique problem. I do that on all my Android devices now (N4, N7, N10).
Similar wifi problems here
I've had similar issues with my N10.
I will have fast internet speeds (30+ Mbps) and it will just freeze. I'll be watching youtube and it will start buffering. Doing a speed test on my phone shows the speeds as normal. It makes no difference whether connected to 2.4 GHz or 5 GHz wifi.
I just resolved my WiFi issue this past weekend. Connectivity is rock solid
Here is what I did I.
Purchased my own cable modem/router. New router had updated firmware. time warner cable modem did not.
Change beacon interval from 100 to 20 on router and repeater.
Made sure router was on a less congested channel.
All is rock solid
YMMV
bflatmajor said:
I just resolved my WiFi issue this past weekend. Connectivity is rock solid
Here is what I did I.
Purchased my own cable modem/router. New router had updated firmware. time warner cable modem did not.
Change beacon interval from 100 to 20 on router and repeater.
Made sure router was on a less congested channel.
All is rock solid
YMMV
Click to expand...
Click to collapse
Great! Often just tweaking settings can do wonders. I flashed DD-WRT on mine and it solved a lot of issues on an old low-spec router.
Hey Guys,
I posted this in General section but saw this so I will add this info:
I just want to share what and why I did it. First off I did not have problems with my wifi on 4.2.2 with the Nexus10. the second that I went to Slim Kat and Vanir 4.4.2 I had weak wifi signal at work and at home when my nexus 7 slim kat and my galaxy note 2 Vanir did not. I noticed that RAM was also weird on the nexus 10. Even though it showed 2gb of ram on the specs it was only showing 1099 on 4.4.2 when I show that I have 1647 ram available with 4.2.2.
Concerning the OS using Ram. Google said that they would make Kit Kat more RAM friendly but I was using 535mb of RAM for 4.4.2 and right now I am showing only 357.3 mb for 4.2.2. I am using the same apps launchers and screen savers
I just flashed back to 4.2.2 this morning so I will update later, I do see an improvement in the wifi though.
I just want to say that I love Slim Kat and that is why I am on the 4.2.2 I just think Google somehow hosed up the wifi on the Nexus 10.
B][/B] Ok so I am at work and have went back and forth between 4.4.2 and 4.2.2. the 4.4.2 connects and disconnects back and forth. When it does connect to router but it says poor connection and it is only 24mbps. "It drops way more than connected" I am 45 ft from router in an open environment.
The 4.2.2 Slim Kat has a fair connection with 78 Mbps and has not dropped once. So I don't know what the difference is with Kit Kat compared to Jelly Bean but for my nexus 10 my wifi is great now with Jelly Bean. I wish I could figure out why and fix but I do not know programming.
I also installed on both 4.4.2 and 4.2.2 a app called WiFi Connection Fixer *Root* by ZEXTR. It did not help 4.4.2 but it did help with 4.2.2. this app helps connect to poor connections or when Android says avoided poor connection.
I don't know why the Nexus 10 is having issues with wifi with KitKat but I wish I could fix it. So I will be on 4.2.2 until a new version comes out and I will test it to see if it fixed it.
update; I have used 4.2.2 all day with the wifi connection fixer and I have not dropped wifi once and the download speed is fast. It is much faster than what 4.4.2 was, at least on my tablet.
Joe
Nexus 10 4.4.3 WiFi Bottleneck Problem
Hello there everyone,
I just wanted to confirm that I personally found a fix on my end for my Nexus 10 WiFi bandwidth problem that was definitely evident for many people that upgraded from 4.4.2. First off, I'm totally stock. I will most likely root & ROM this thing in this near future. I was having a bottleneck on my Nexus 10 around ~2 mbps when I tested using the speedtest.net application (may not be the best measurement application but it works). I ended up fixing the problem by changing my router settings in the WiFi section of my browser based software to N/G Mixed instead of just Mixed (which allows 802.11a/b as well as 802.11g/n to run on the router's WiFi signal). I use DD-WRT on my router as well so that may have played a factor in it but I did NOT see an increase in bandwidth until making the N/G Mixed change in the settings. I found this suggestion earlier in the thread and wanted to give it some credit. Thanks everyone!

WiFi connection is stable, but Internet isn't

Somebody please delete my previous thread (wrong forum), thank you: http://forum.xda-developers.com/showthread.php?t=2707468
------------------------------------
WiFi connects to my router and stays connected at excellent signal strength without any trouble. Internet connection however, always disappears after a minute or so. Then my Dolphin Browser either keeps loading a website forever or gives me some error like "Webpage not available". Same story with stock or any other browser. I'm not sure since how long I have had this issue. It surely existed already when my phone came back from warranty service (and I had sent it there because of very short range of WiFi commonly known problem which they fixed by giving the phone new hardware). I think that upgrade to Android 4.2.2 might have caused my problem, but it was such a long time ago that I don't remember now (I don't use/need WiFi that much, mobile data internet is enough for me).
What I've tried so far:
-rebooting phone and router obviously
-factory formatting the phone
-WiFi analyzer app
-changing all the network parameters and re-setting it up
-WPS connecting
-playing with all the WiFi settings on my phone (proxy settings, ip settings, wifi optimization and other)
-finally, today I unlocked bootloader, rooted and installed custom ROM hoping it'd help (but it didn't and now I lost my warranty lol)
What I have:
HTC One X Endeavor
Android 4.2.2 HTC Sense 5.0
Android Revolution HD 33.1
3.1.10-g7f360be Kernel version
TP-LINK
N750 Wireless Dual Band Gigabit Router
Model No. TL-WDR4300
I'm thinking about installing other ROM, some that works on Android 4.0 or KitKat, could it help?
Oh, and I should add that two different notebooks, Galaxy S4, S3 mini, Xperia X10 and a tablet all work fine with this network :>
I can provide any screenshots, photos, names of devices etc., just tell me what is needed.
HELP!
I have a similar problem with my device, but I just reset my router and it's fine. Maybe your problem is that your phone doesn't receive an ip address. You can check out if you have received an address via settings->wi-fi-> advanced, and check the 'ip address'. If it says ' not available, reset your router and your phone's wi-fi until you get one.
|>/\nte said:
I have a similar problem with my device, but I just reset my router and it's fine. Maybe your problem is that your phone doesn't receive an ip address. You can check out if you have received an address via settings->wi-fi-> advanced, and check the 'ip address'. If it says ' not available, reset your router and your phone's wi-fi until you get one.
Click to expand...
Click to collapse
Nopes, IP reception is fine. Here are all my settings:
Status: Connected
Signal strength: Excellent
Link speed: 26Mbps
Security: WPA/WPA2 PSK
IP address: 192.168.0.101
Proxy settings: None
IP settings: DHCP
As I said earlier, I have been playing with all the network settings above as well as with the phone WiFi advanced settings and it didn't change anything.
Hm…it may be a hardware problem.

Connecting to home wifi faster

First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
i cant see why you would choose 5ghz over 2.4ghz maybe thats the reason for your problem
5Ghz allows for faster throughput (more bandwidth available) - uses 80 mhz channels vs 20 mhz on the 2.4ghz.
I noticed the slow connection too. Seems if you open wifi settings, it connects immediately.
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
Did you try changing the channel in your router?
Haven't tried changing the channel. Will report back after I get home after work.
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
I can say that problem is with ROM.
It has very slow auto connection time.
To connect faster I am using:
- drop down notification menu - tap wifi menu where its possible to choose wifi's from that setting - just wait, as soon as it turns on wifi and actually starts to scan area it will auto connect faster than when you just turn on wifi and wait.
I confirm this behavior on XT1575 as well. It takes quite a long time to connect when i enable WiFi.
But if I enter the WiFi settings, it connects instantly.
And i think it's like this since Android 6. I don't recall having this issue on Android 5.
I can't say I've noticed any problems connecting to WiFi networks at home.
I'm running 6.0 stock (Feb 2016 security update) rooted to hell and back.
I have access to five different WiFi networks at home, and am registered to all five for convenience.
I use an app called Best WiFi to auto-connect to the strongest signal whenever my current signal drops below a user-configurable strength threshold.
Perhaps that's the reason I'm not feeling this issue?
https://play.google.com/store/apps/details?id=com.pintacdesign.bestwifi&hl=en
I've been using this app for years, since Android 4.0, and across four or five different devices now.
Edit - Before the inevitable questions. I live in a basement and have my own personal WiFi network down there. Upstairs, we have two network piping out of the office (2.4 GHz and an associated 5 GHz link). For the far side of the home, we have a WiFi extender that mirrors and extends those two signals coming from the office (2.4 GHz-Ext and 5 GHz-Ext).
My report:
Whether connecting to 2.4 Ghz (20/40 Mhz) or 5 Ghz (20/40/80 Mhz) the connectspeed is between 5-15 seconds if singlepressing on the wifitoggle. If longpressed it takes about 2-3 seconds. Either this is a problem with the rom or this is the intended behaviour in Marshmallow. But this was not the behaviour in Lollipop as far as I remember. Of course you could argue this a nonissue since longpressing the wifitoggle is the solution. However I would like singlepressing to behave the same since I use Gravitybox to hide the statusbar when pressing 2-state tiles.
Yeah this is a huge pain in the ass. I set up a WiFi shortcut on my home screen so I would start using WiFI more to save battery, but it takes so long for it to finally connect. I also have Tasker turn WiFi on in the morning when my alarm goes off, and it takes so long. It took a few seconds in Lollipop, and now it takes 10+ seconds in Marshmallow. It's ridiculous. Anyway there is no real fix except going into the settings or tapping the drop-down toggle multiple times, as others stated.
I notice the same thing too. Wifi takes long to connect on boot. When I go to connect wifi off, it always shows the routers in the previous area before showing what's in the current area. I turn wifi off when leaving home. I'll connect to a public router, but will still show my home router before showing any around me. I had a Galaxy S5 before and wifi connected right away.
Heaby said:
First my setup:
XT1572
TruPureXMM 2.6.3
frankenclark kernel 0.8
Is there anyway to connect to my homewifi faster? I've selected to only show 5ghz wifi networks and I'm only seeing two when I enable wifi yet it dosen't connect to my wifi for maybe 5-10 seconds. Is this a problem with the rom/kernel? I don't remember connecting being this slow when I was on stock 5.1.
If I can change connect speed through the rom/kernel that would be best. Otherwise is there an app that can do it?
Click to expand...
Click to collapse
First off, I am not sure if the OP is turning wifi on first when arriving at home and then seeing the delay, or if Wifi is already ON when you arrive home (EDIT: just reread OP and it appears you are turning it ON - see below), but I leave Wifi ON all the time and do not see any delay when I get home (I pull into my garage and my apps are already updating via my home wifi before I park my car).
There are various steps involved in "getting onto wifi" that don't just involve the client device (authentication to the access point; getting an available IP address from your AP or a separate router, and the stability/software quality of those devices, for example). but you may want to consider a few things to speed up the process at home regardless if Wifi is on, or you turn it on first:
1) go into "Saved Networks" in your wireless settings and "forget" any networks you don't need
2) make sure the device on your network issuing IP addresses (DHCP server software built into your router or AP, whichever you use - also make sure only ONE of the them is acting as DHCP server) has enough available IP's in its pool - better yet, assign the same IP to your MotoX's MAC address (set up a static IP in your routers LAN/DHCP settings if it has them so your MotoX gets the same IP every time)
3) while I agree with another poster about avoiding the 2.4 GHz for Wifi (congestion and more interference), even many 802.11n client radios today don't support 5GHz so keep that in mind if you shut down 2.4GHz in your home completely
4) Use WPA2 with PSK for authentication AND make sure your home SSID is being broadcast (not hidden, which they really aren't anyway with the right tools - A strong WPA2 PSK password is better security even if the world can see your SSID.
4) If you do turn Wifi On and Off, consider leaving it ON and see if that helps your connection time (I suspect it will If you are concerned about battery drain, you can disable wifi during sleep in wireless settings, but I don't have a battery issue with Wifi on 24/7. The Wifi radio beaconing for SSID's or even staying connected to an SSID in the background, when you're not using Wifi, is a very minimal power drain compared to having your screen brightness higher than you need (you can however turn off the annoying wifi network notification setting).
Hope this helps.
For those with this delay, are you running xposed with gravitybox? Tried disabling gravitybox? It maybe GB that's introducing the delay. Need feedback from those running stock.
If stock exhibits similar behavior then it's probably characteristic of the quick toggles in the moto x. The delay appears to be in the actual wifi connection phase, not acquiring ip. As once it actually connects, IP acquisition is almost instant. Toggling wifi off then on directly through settings is very fast, maybe 3-4 seconds.
I have a moto g lte (xt1045) on cm13 which takes about 5 seconds to connect after toggling wifi off then back on. The moto x takes a good 15 seconds.
ech1253 said:
First off, I am not sure if the OP is turning wifi on first when arriving at home and then seeing the delay, or if Wifi is already ON when you arrive home (EDIT: just reread OP and it appears you are turning it ON - see below), but I leave Wifi ON all the time and do not see any delay when I get home (I pull into my garage and my apps are already updating via my home wifi before I park my car).
There are various steps involved in "getting onto wifi" that don't just involve the client device (authentication to the access point; getting an available IP address from your AP or a separate router, and the stability/software quality of those devices, for example). but you may want to consider a few things to speed up the process at home regardless if Wifi is on, or you turn it on first:
1) go into "Saved Networks" in your wireless settings and "forget" any networks you don't need
2) make sure the device on your network issuing IP addresses (DHCP server software built into your router or AP, whichever you use - also make sure only ONE of the them is acting as DHCP server) has enough available IP's in its pool - better yet, assign the same IP to your MotoX's MAC address (set up a static IP in your routers LAN/DHCP settings if it has them so your MotoX gets the same IP every time)
3) while I agree with another poster about avoiding the 2.4 GHz for Wifi (congestion and more interference), even many 802.11n client radios today don't support 5GHz so keep that in mind if you shut down 2.4GHz in your home completely
4) Use WPA2 with PSK for authentication AND make sure your home SSID is being broadcast (not hidden, which they really aren't anyway with the right tools - A strong WPA2 PSK password is better security even if the world can see your SSID.
4) If you do turn Wifi On and Off, consider leaving it ON and see if that helps your connection time (I suspect it will If you are concerned about battery drain, you can disable wifi during sleep in wireless settings, but I don't have a battery issue with Wifi on 24/7. The Wifi radio beaconing for SSID's or even staying connected to an SSID in the background, when you're not using Wifi, is a very minimal power drain compared to having your screen brightness higher than you need (you can however turn off the annoying wifi network notification setting).
Hope this helps.
Click to expand...
Click to collapse
gpz1100 said:
For those with this delay, are you running xposed with gravitybox? Tried disabling gravitybox? It maybe GB that's introducing the delay. Need feedback from those running stock.
If stock exhibits similar behavior then it's probably characteristic of the quick toggles in the moto x. The delay appears to be in the actual wifi connection phase, not acquiring ip. As once it actually connects, IP acquisition is almost instant. Toggling wifi off then on directly through settings is very fast, maybe 3-4 seconds.
I have a moto g lte (xt1045) on cm13 which takes about 5 seconds to connect after toggling wifi off then back on. The moto x takes a good 15 seconds.
Click to expand...
Click to collapse
@ech1253: I've checked everything you suggested and you are right, having wifi on will make it connect almost instantly.
@gpz1100: I'm running xposed with gravitybox. Disabling gravitybox didn't change anything. I'd rather not uninstall xposed and/or go back to stock so if someone on stock without xposed could chime in that would be helpful.
It does it on stock android 6 for me and on a custom rom as well. Since day 1 with the moto x but at least wifi works just a long delay that no other android flagship from suffers from. :S
hexxor93 said:
It does it on stock android 6 for me and on a custom rom as well. Since day 1 with the moto x but at least wifi works just a long delay that no other android flagship from suffers from. :S
Click to expand...
Click to collapse
That's...not encouraging
Hopefully it's a softwarebug.

Categories

Resources