[Q] Reverse Thedering SGS3 I9300 Ad hoc with wpa_supplicant - Networking

Hi,
I try to set up my sgs 3 S3 to connect with ad hoc network . The device is rooted . Not flashed .
Every time i change the wpa _supplicant file linke discribt it dos not work .
Have someone the rigtht file ?
Original File sice für s3 is 611 kb. The Files form the Net are 286 kb.
Please help ...

No result? Or Not possible?
Sent from my GT-I9300 using xda premium

dtward said:
No result? Or Not possible?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I've been looking for the same thing. Idone a bit of reading up on WPA_supplicant.conf last night, and managed to get ad-hoc mode activated, somewhat but still working on it.
It shows the "ad-hoc activated" warning but haven't managed to connect properly yet..
the original WPA_supplicant.conf file looks like:
update_config=1
ctrl_interface=wlan0
eapol_version=1
ap_scan=1
fast_reauth=1
p2p_listen_reg_class=81
p2p_listen_channel=1
p2p_oper_reg_class=115
p2p_oper_channel=48
device_name=SAMSUNG_MOBILE
manufacturer=SAMSUNG_ELECTRONICS
model_name=SAMSUNG_MOBILE
model_number=2012
serial_number=19691101
From what I could gather you need to add:
Network{
settings in here
}
an example config and explanation here:
google: wpa_supplicant.conf, example,
(an example ad-hoc config is near the end of the page)
May end up having to edit the WPA_supplicant itself I'm not too sure yet but I'm going t keep hacking away for a few days to see what I can come up with, any help would be appreciated!
Info:
i9300
rooted
HD Revolution 18

Related

[Q] How-TO enable adhoc wifi for MDJ FroYo Sense Clean v. 2.4

Hello All.
i've asked in this thread http://forum.xda-developers.com/showthread.php?t=780525
but no body answered.
how can i add support for adhoc wifi in this rom?
thanks
ataomega said:
Hello All.
i've asked in this thread http://forum.xda-developers.com/showthread.php?t=780525
but no body answered.
how can i add support for adhoc wifi in this rom?
thanks
Click to expand...
Click to collapse
I think you can use the patch of wpa_supplicant file from my build.. check out Jaws-MIUI-rc1 build..
use HD2ONE Build
or just replace the file as mentioned above.
I asked also on how to enable Ad-Hoc on my sense (when i was using it), but none of the methods worked for me (supplicant, .so modules, ecc). At the end i used the Connectify program on Windows 7 and this worked.
(Connectify is a Windows 7 software, that if you have a compatible wifi module, it will make it work as an AP instead of adhoc, and HD2 connects with no patches as it sees it as normal wifi and not adhoc)
very interesting post!!! I was looking for something like that but running MCCMjoon's Desire HD V2 and or V3.4. What files or what combination will work? Do not really want to flash to any other ROM at the moment
Thanks guys.
tnx
thanks for all replies.
so which patch i should use?
patch
lesjaw said:
I think you can use the patch of wpa_supplicant file from my build.. check out Jaws-MIUI-rc1 build..
Click to expand...
Click to collapse
could you please attach that file?
tnx a lot
This is the one that comes with HD2ONE 0.3.4
system\etc\wifi\
do NOT forget to save a copy from the original file..!
Hope this will solve ur problem ..
__
btw , connectivity is a great alternative in case u don't want to replace files ..
tnx
mo0ody said:
This is the one that comes with HD2ONE 0.3.4
system\etc\wifi\
do NOT forget to save a copy from the original file..!
Hope this will solve ur problem ..
__
btw , connectivity is a great alternative in case u don't want to replace files ..
Click to expand...
Click to collapse
tnx. i will try and tell here
Thread moved to Q&A Forum.
Mark.
ataomega said:
tnx. i will try and tell here
Click to expand...
Click to collapse
Does it work?
Nevermind, I just switch to Darkstone RAM version and it works.
Thanks
mcbyte_it said:
I asked also on how to enable Ad-Hoc on my sense (when i was using it), but none of the methods worked for me (supplicant, .so modules, ecc). At the end i used the Connectify program on Windows 7 and this worked.
(Connectify is a Windows 7 software, that if you have a compatible wifi module, it will make it work as an AP instead of adhoc, and HD2 connects with no patches as it sees it as normal wifi and not adhoc)
Click to expand...
Click to collapse
really? then how is it that whenever i find connectify's network it says "nameofnetwork (AD-HOC)"?
Itried to replace the file wpa_supplicant, but accidently i deleted the file from system/etc/wifi , i have a backup one but i cant copy it to the directory, i´m using astro file manager, when i try to put the file into that directory it gives an error.. some help would be nice, thanks..
Somebody, please please give me download link for this build! I tried to navigate to the corresponding thread, but due to some problem couldn't read! Please, give me the link. I just love this build!
yugoport said:
Itried to replace the file wpa_supplicant, but accidently i deleted the file from system/etc/wifi , i have a backup one but i cant copy it to the directory, i´m using astro file manager, when i try to put the file into that directory it gives an error.. some help would be nice, thanks..
Click to expand...
Click to collapse
Of course, Astro has no permissions to write in system folders! You need to use Root Explorer! I know it's paid, no warez here. PM me for further assistance.

Galaxy Tab P1010 (WIFI version) ad hoc networking

I 've found several threads talking about android with ad hoc networking problem. I 've also downloaded wpa_supplicant file and replaced the original one. But it can not work on my Galaxy Tab P1010 wifi version. Could someone help create a wifi version wpa_supplicant file? That will be much appreciated.
they've just released the WiFi version so it'll be a waiting game for us SGT Wifi version owners.
Custom ROMs for the Galaxy P1010 Wifi version
donetus said:
they've just released the WiFi version so it'll be a waiting game for us SGT Wifi version owners.
Click to expand...
Click to collapse
Do you guys know if all the current roms and installation procedures will work without changes on a Galaxy P1010 Wifi version?
Thanks.
^^ i haven't dared tried using it though .. there might be a compatibility issue and i might end up having my SGT as a paperweight.
but seriously, i would love to but is there a way to restore the SGT to its original state in case something goes wrong? does KIES allow that? 'coz in my Mini Pro, if something goes wrong, i can always use PC Companion / SEUS to reload the OS.
I'm looking forwards to this adhoc wifi on my GTab Wifi too.
I 've also downloaded wpa_supplicant file and replaced the original one. But it can not work on my Galaxy Tab P1010 wifi version. Is it wifi version or 3G version's "wpa_supplicant" file is compatibility?
I'm looking forwards to this adhoc wifi on my GTab Wifi too.
So far I have tried every version of wpa_supplicant and no luck. The best results I got were from version 0.6.10. My SGT can see the ad-hoc connection. it connects but fails to obtain and IP.
I hope someone can get a fix for this. I realy don't want to pay for interent on two devices.
Hmm.... That's really weird. I'm not Dev, but the WPA_supplicant file ought to solve that problem.... Unless they (samsung) have blocked Ad-Hoc in the kernel. That would suck. I'd try a Voodoo kernel and see if that helps. $0.02.
Can someone post the wpa_supplicant from the wifi version? Im not the best with this stuff but ill give it a go.
Sent from my GT-P1000R using XDA App
gavriel18 said:
Can someone post the wpa_supplicant from the wifi version? Im not the best with this stuff but ill give it a go.
Sent from my GT-P1000R using XDA App
Click to expand...
Click to collapse
Here is my GT-P1010 wpa_supplicant, thanks!
webrover83 said:
Hmm.... That's really weird. I'm not Dev, but the WPA_supplicant file ought to solve that problem.... Unless they (samsung) have blocked Ad-Hoc in the kernel. That would suck. I'd try a Voodoo kernel and see if that helps. $0.02.
Click to expand...
Click to collapse
yeah . .after replacing the file, not only does it not connect to the adhoc network, it also fails to detect any wireless connection
tocupid said:
Here is my GT-P1010 wpa_supplicant, thanks!
Click to expand...
Click to collapse
Dear gavriel18, how is this going on? looking forward to your good news!!
tocupid said:
Dear gavriel18, how is this going on? looking forward to your good news!!
Click to expand...
Click to collapse
Thanks so much for this tread, was having the same problem. Hope someone will figure this out soon.. would love to use my Sgt p1010 on ad Hoc. thanks in advance.
hey everyone give this a try first
try this using terminal on your galay tab to change the permissions
download a terminal program from the market. when terminal is started type the following command below.
Su
Chmod 777 system/bin/wpa_supplicant
and see if it will connect.
If not I pulled the Nookcolors WPA_Supplicant file that has been edited. It is a wifi only device so it might work for you guys. What I am going to do is compare the regular tabs WPA file to Wifi only version and see what needs to be edited.
Donetus I haven't forgotten you.
Tried chmoding the wpa file with no luck. Thanks for the suggestion. Larry
jkurl said:
hey everyone give this a try first
try this using terminal on your galay tab to change the permissions
download a terminal program from the market. when terminal is started type the following command below.
Su
Chmod 777 system/bin/wpa_supplicant
and see if it will connect.
If not I pulled the Nookcolors WPA_Supplicant file that has been edited. It is a wifi only device so it might work for you guys. What I am going to do is compare the regular tabs WPA file to Wifi only version and see what needs to be edited.
Donetus I haven't forgotten you.
Click to expand...
Click to collapse
thanks, bro .. didn't know that you're a member here ..
i'll give the terminal thingie a try ..
=====
update: changing permission didn't work
Yep I am on here everyday. Spend a lot of time here and over there.
Sent from my Xoom using Tapatalk
actually, the wpa adhoc-ed we got for the galaxy tab is coming from the galaxy S forums, so if anyone wants to ring some bells...
I tried Nook color WPA_supplicant file and G Tab started showing available network as well as ad-hoc network however it was not able to connect to network. was failing at acquiring IP address!
That is a good thing as we are closer. I really need to get off my ass and try to fix it now. Gotta be just a few lines that need editing then. Did you try doing a chmod after you used the nookcolors wpa file. Try that I put the commands in the upper post.
Sent from my Nexus S using Tapatalk

Access Point Names

Hey If You get frustrated by entering the apns again and again i am having a solution for rooted galaxy 3 users.
just replace my apn-conf file with your native apn-conf file and reboot once .
file : http://www.multiupload.com/L9WXMGDNPN
After doing this open settings -->Wireless and networks -->Mobile Networks-->Access Points Names press menu and select restore default option and You are done.
Now insert any sim and your mobile will automatically retrive apns
Thanks a lot !
im so tired of having to enter it again and again
/etc/apn-conf.xml/
Replace this with the one in this post..
I would suggest using APN Backup & Restore app. Works fine for me. (;
Apn name list for indian users..
Vodafone- www
Aircel- aircelweb
Uninor- uninor
Reliance- smartnet (reliance smart) / rcomnet (reliance gsm)
Docomo- TATA.DOCOMO.INTERNET
Bsnl- bsnlnet
Airtel- airtelgprs.com
PS: names are case sensitive..
Sent from my GT-I5800 using Tapatalk
almost in every custom ROM that list is included
jazux said:
almost in every custom ROM that list is included
Click to expand...
Click to collapse
No.. Uninor & Reliance 'smart' is not included..
Sent from my GT-I5800 using Tapatalk

WiFi MAC address spoofing ( Advanced Users )

Hi... Today I'm going to tell you about spoofing your WiFi MAC address....
###Take backup of your phone data before proceeding.... ###
####Neither I nor XDA will be responsible for :-
Bricked Phone
Getting fired from your job because alarm failed
Girlfriend ditched you because u couldn't pick her phone
Thermonuclear war........ Hhehehhehehe###
Requirements: -
1. Rooted Phone
2. Root File Explorer (I personally use ES File Explorer)
3. Hex Editor (It's available on Play Store)
4.A brain..
!!!Important: Take backup of your IMEI both sim!!!!!!
Steps :-
1. First go to Settings>WLAN>Advanced and note down your MAC Address (it will be in a format like xx:xx:xx:xx:xx:xx)
2. Now open your root file manager..
Goto data/nvram/APCFG/APRDEB/
Copy file "WIFI" and "WIFI_CUSTOM" to your SD card.
3. Open "WIFI" file in Hex Editor.
4. Locate starting of your MAC in it.... (It must be in 2nd line)
5. DO NOT CHANGE FIRST THREE SETS OF MAC ADDRESS.... Now you can change last 3 sets...
6. Now save file...
7. Overwrite this file with original in data/nvram/APCFG/APRDEB/
8. Reboot your phone...
It's done!!!!! Check your Mac address in advanced WiFi menu......
Hit thanks if it helped you....
Does this work in any Android version?
I've tried this in JB....... So can say about it only...... You can try it on other version but first make backup in case anything goes wrong...
Just skip all and install pry fi..
Lim Wee Huat said:
Just skip all and install pry fi..
Click to expand...
Click to collapse
With all due respect.... I tried all apps on MTK devices.... None worked then found this solution while working around..... Can't say about others.....
Sent from my Ford Mustang GT using XDA Free mobile app
I am want to hack my fathers wifi through plz tell some way developer plz help me
Sent from my Q600s using XDA Premium 4 mobile app
thanx
Thanx ! All application i tried to change my mac adress didn't work.
Tour solution work, tanks to share it ! Have a good day !
Xavier59700 said:
Thanx ! All application i tried to change my mac adress didn't work.
Tour solution work, tanks to share it ! Have a good day !
Click to expand...
Click to collapse
If i flash another rom, my mac address will be back to the original ?, or should i change it ?
I cannot help you with this as mtk chipsets doesn't allow monitor mode.....
Google for "Kali Linux" and "Wifi Slax" for more info for cracking Wifi with your laptop.......
You can also post your query at mw002techcare.webs.com..........
Sent from my Mustang GT using XDA Free mobile app
It depends on whether new ROM wipes whole data or not...... You can also manually change it......
Sent from my Mustang GT using XDA Free mobile app
psycho1200 said:
If i flash another rom, my mac address will be back to the original ?, or should i change it ?
Click to expand...
Click to collapse
Sent from my Mustang GT using XDA Free mobile app
Go to my website www . learn hacking . net
Sent from my Micromax AQ4501 using XDA Free mobile app
is it possible to change complete/whole mac address?
Sent from my Micromax A310

[WiFi] DHCP accelerator

Hi,
I've been finding DHCP was fairly slow on Android, and I took a quick look at what could be done.
cf http://cafbit.com/entry/rapid_dhcp_or_how_do for the theoritical details
The actual patch is partly from chromiumos, and 5 trivial lines from me
Attached is a dhcpcd binary
Replace your system/bin/dhcpcd with this one, and it should be way faster.
It has been successfully tested on a CodeAurora Qualcomm 4.4 firmware, a MTK 4.4 firmware, and a Nexus9 AOSP 5.0 firmware.
See http://forum.xda-developers.com/showpost.php?p=58713128&postcount=75 for update.zip of v3
ChangeLog:
v1:
- per-ssid lease
v2:
- ARP before DHCP request to determine if previous IP/router/dns was good
v3:
- Delete one useless script call, and 1024 useless fd close
v4:
- Revert v2 change
it looks cool thanks i will try it ! can u explain what u did Exactly ? ^^ (en details ^^)
androidrouen said:
it looks cool thanks i will try it ! can u explain what u did Exactly ? ^^ (en details ^^)
Click to expand...
Click to collapse
There are two parts:
- First, it is to have a different lease file by AP name (the lease file has the last IP the device got, if you changed WiFi network, this IP was wrong...): in read_lease and write_lease
- One is well explained in the article I mentioned before (basically it tests if the IP routeur he got last time still works, if so, he kind-of bypass actual DHCP), original patch comes from chromium os: http://git.chromium.org/gitweb/?p=c...ff;h=d390ef100b42b7d58a8c59c13b3f6dca7eeb3232
(I see a most-likely security flaw: with a wifi named ../../../...something)
Which one should i use?do i have to remove the extension?sorry for bad english.
Sent from my SM-N9005 using Tapatalk
donvito62 said:
Which one should i use?do i have to remove the extension?sorry for bad english.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Take the one which is inside dhcpcd.tar, no need to rename
it did not ask for replace.as it has bin extention,the one i have in original has no extention.is that ok?
Sent from my SM-N9005 using Tapatalk
---------- Post added at 03:20 AM ---------- Previous post was at 03:16 AM ----------
the file name that i have is:dhcpcd
Wile Yours is: dhcpcd- bin
Sent from my SM-N9005 using Tapatalk
donvito62 said:
it did not ask for replace.as it has bin extention,the one i have in original has no extention.is that ok?
Sent from my SM-N9005 using Tapatalk
---------- Post added at 03:20 AM ---------- Previous post was at 03:16 AM ----------
the file name that i have is:dhcpcd
Wile Yours is: dhcpcd- bin
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Sorry, you're right, you have to rename dhcpcd-bin to /system/bin/dhcpcd
trying on htc one m8 now thanks
DHCP connection is faster than before. Yes its working on Android 4.4.4
Thanks! Is there any possible drawback of this implementation compared to the normal one?
Not working on my galaxy tab 2 7.0 running CM12.
Had to format system and reflash ROM as it messed it up and WiFi was no longer connecting to router even if I placed back the original file.
You have been warned by me.
mze1 said:
Not working on my galaxy tab 2 7.0 running CM12.
Had to format system and reflash ROM as it messed it up and WiFi was no longer connecting to router even if I placed back the original file.
You have been warned by me.
Click to expand...
Click to collapse
Did you fix the file permissions?
Working without a flaw on my galaxy tab 2 running omnirom 5
5.
will this work on android 4.2.2?
Sent from my Micromax A117 using XDA Free mobile app
I have a Nexus 5 with Cataclysm Rom. Dont see any dhcpd file in my system/bin folder
jfim88 said:
I have a Nexus 5 with Cataclysm Rom. Dont see any dhcpd file in my system/bin folder
Click to expand...
Click to collapse
Same here.
ninjasinabag said:
Did you fix the file permissions?
Working without a flaw on my galaxy tab 2 running omnirom 5
5.
Click to expand...
Click to collapse
Yeah forgot about that. Now its working once I fixed file permissions.
Thanks.
jfim88 said:
I have a Nexus 5 with Cataclysm Rom. Dont see any dhcpd file in my system/bin folder
Click to expand...
Click to collapse
It's dhcpcd not dhcpd, still not there ?
Siddk007 said:
will this work on android 4.2.2?
Click to expand...
Click to collapse
does not work for me on 4.2.2 (MTK )
and checked on another phone with 4.4.2 (MTK) and it works. Fast as lightning.
Siddk007 said:
will this work on android 4.2.2?
Sent from my Micromax A117 using XDA Free mobile app
Click to expand...
Click to collapse
Should work on any phone running jb up to lollipop.
phhusson said:
It's dhcpcd not dhcpd, still not there ?
Click to expand...
Click to collapse
jfim88 said:
I have a Nexus 5 with Cataclysm Rom. Dont see any dhcpd file in my system/bin folder
Click to expand...
Click to collapse
dhcpcd is there in cataclysm, but looking through system/bin using root explorer couldn't see it, don't know if it hide by itself.
But still, I able to replace it. So it works good.

Categories

Resources