I want to know how to enable Adhoc Wifi connection on Galaxy Note N7000, I have rooted device, While searching I found a solution, downloaded a custom wpa_supplicant to changed wpa_supplicant from Sys/bin and changed permissions. But didnt work for me!
Anyone got file or procedure so I can use adhoc wifi?
I have Internet connection in my Laptop & want to share it in my note.
Regards,
Mafiaoso
Mm? If you want to share your laptops connection just activate virtual router if you have windows 7 and activate the wifi on the Note..
In the other hand if you want to share your note Internet, then go to settings-more-wifi hotspot/usb modem and then configure a password if you want and then activate it..
You don't need to be rooted or change anything
Tapatalking on my n7000
msedek said:
Mm? If you want to share your laptops connection just activate virtual router if you have windows 7 and activate the wifi on the Note..
In the other hand if you want to share your note Internet, then go to settings-more-wifi hotspot/usb modem and then configure a password if you want and then activate it..
You don't need to be rooted or change anything
Tapatalking on my n7000
Click to expand...
Click to collapse
ummm no I tried that once ,Iphones could see the private adhoc network but my note couldn't ,it was embarrassing .
MR.change said:
ummm no I tried that once ,Iphones could see the private adhoc network but my note couldn't ,it was embarrassing .
Click to expand...
Click to collapse
Try installing connectify on ur PC..works well.. I use it on my desktop & a Belkin wifi dongle (reciever) to use my PC's internet connection on my Note..
http://www.connectify.me/hotspot/
go with connectify
Connectify didnt working, tried it.I have win7. What should I do?
Mafiaoso said:
Connectify didnt working, tried it.I have win7. What should I do?
Click to expand...
Click to collapse
What exactly is the issue? I too have Win7 & working fine frm past 6-8months..
Mate... android doesn't have the hardware to detect adhoc networks...
So best thing is use connectify in your laptop... connectify is compatible with win 7 & 8...
If u r not able to install it then try again... u might be doing it wrong... working fine with me...
---------- Post added at 10:47 PM ---------- Previous post was at 10:45 PM ----------
Mafiaoso said:
Connectify didnt working, tried it.I have win7. What should I do?
Click to expand...
Click to collapse
I think u are trying to use the lite version of connectify.... lite version doesn't support internet sharing... only pro verson does... so try getting a pro version
Mafiaoso said:
Connectify didnt working, tried it.I have win7. What should I do?
Click to expand...
Click to collapse
download and activate pro version from torrent
kvsandeepreddy said:
Mate... android doesn't have the hardware to detect adhoc networks...
So best thing is use connectify in your laptop... connectify is compatible with win 7 & 8...
If u r not able to install it then try again... u might be doing it wrong... working fine with me...
---------- Post added at 10:47 PM ---------- Previous post was at 10:45 PM ----------
I think u are trying to use the lite version of connectify.... lite version doesn't support internet sharing... only pro verson does... so try getting a pro version
Click to expand...
Click to collapse
Wrong.. I can perfectly connect my note/tab 7+/nexus to my laptops windows 7 virtual router natively.. Don't need any connectify
What I think is OP needs to update his wifi card drivers..
Tapatalking on my n7000
I also tried virtual router, a msg appears that virtual router not started.
about Connectify, I have installed Connectify Pro cracked version, now I have plug another wifi adapter with updated drivers ,it connected & also showing the adhoc connection icon on network (Pic attached) but my Note did not detect any adhoc connection, Whats the problem?
off topic
well you are not supposed to discuss cracked software here.. or any other respected boards..
bit of advice...even if you use pirated software please don't mention it in any forums .
on topic
i have never been able to successfully use ad hoc wifi on my note...that's the reason i use reverse tethering apps to connect to the internet via USB cable when I'm outside 3g with no WiFi.
Related
hi alls,, wta how to connect usb modem 3g acer iconia a500?
thx b4
+1, same question
+1
I'm definitely interested also.
+1 Good question...
Really looking forward to the answer/suggestions from the experts
is this what you're looking for?
http://forum.xda-developers.com/showthread.php?t=1058846
Is there anyone succeeded? Share your experience here, please ^^
Why not use a Mifi or a Huawei E5830?
Or if you have already an Android 2.2 Phone, use Wifi Tethering?
Hello
My experience :
First : same problem : my tablet don't want to connect with my HD2 (Rom WM NRGZ), while my laptop can do.
But today I show my Iconia 500 to my work, and a friend with her HTC Desire HD with Android custom ROM and wifi tethering connect it without problem...
But it's not a USB modem it's wifi tethering (I'm probably off topic ?)
@+
Hi
I've the same combination (iconia-hd2 wm) and wrestled quite a while to tether in windows mobile. Tried numerous wpa-supplicants and tetherprogs but none worked. The solution.......change your HD2 from windows to Android. I've CyanogenMod Android 2.2. (search in HD2 forum) I can dual boot but so satisfied with Android that i keep it running continuous. Tethering the Iconia.........just start "wireless tethering" in Android, connect and ready.
groaner said:
is this what you're looking for?
http://forum.xda-developers.com/showthread.php?t=1058846
Click to expand...
Click to collapse
Thanks, that worked for me.
I have a ZTE 3G USB.
Also tried tethering with a Galaxy S, also that works.
Just follow the steps from the post, and it should work.
m_marcel said:
Also tried tethering with a Galaxy S, also that works.
Click to expand...
Click to collapse
USB or WiFi?
urbie47 said:
Hi
I've the same combination (iconia-hd2 wm) and wrestled quite a while to tether in windows mobile. Tried numerous wpa-supplicants and tetherprogs but none worked. The solution.......change your HD2 from windows to Android. I've CyanogenMod Android 2.2. (search in HD2 forum) I can dual boot but so satisfied with Android that i keep it running continuous. Tethering the Iconia.........just start "wireless tethering" in Android, connect and ready.
Click to expand...
Click to collapse
Hi
Tanks, for me it's the solution, but now I search a SD build that suits me...
And I search a solution for WM
@+
Bec07 said:
USB or WiFi?
Click to expand...
Click to collapse
WiFi
I don't think it will work with USB..at least I didn't find a way to do this with my PC
Not to be completely annoying, but the [DEV] thread is for someone who knows their way around. If anyone could post a dummy's step-by-step it would be a huge help for noobie android enthusiasts.
m_marcel said:
Thanks, that worked for me.
I have a ZTE 3G USB.
Also tried tethering with a Galaxy S, also that works.
Just follow the steps from the post, and it should work.
Click to expand...
Click to collapse
i'm trying with A500 with ZTE modem.
I followed http://forum.xda-developers.com/showthread.php?t=1058846
and as first step says
* put the modules from my other post in the root of /sdcard
copied modules - k2.6.36.3.zip and copied to /sdcard
I facing permission error during
put chat,ppp-start.sh,ppp-stop.sh in /system/xbin
how to solve this?
can someone make a noob guide
i have two usb 3g modems
huawei - E1750
ZTE-MF190
i have rooted iconia, and got the files needed, if someone can help me, i will be very thankful for the same
Hi guys, I upgraded to the "Floyo 0.30" and everything worked except the wifi tether. Barnacle I use when I start it but can not find the network from another computer. Anyone have any idea how to tether wifi work? I really need to get by in this situation. Thank you and sorry for my bad english.
fabiofurquim said:
Hi guys, I upgraded to the "Floyo 0.30" and everything worked except the wifi tether. Barnacle I use when I start it but can not find the network from another computer. Anyone have any idea how to tether wifi work? I really need to get by in this situation. Thank you and sorry for my bad english.
Click to expand...
Click to collapse
Same issue for me... Barnacle can't give DHCP address to Windows 7 computer when running Floyo 0.30.
Sorry about my poor English,
Please help me, I bought ZTE MF190s and I have Driver for Linux but I don't know how to use it on my Inonia A500, I try to disable zerocd, but it's not working
This is link of Driver mediafire.com/?e9z45n5wqre8r8j (Sorry, new member can not post link, please copy and paste this link on web browser)
I big thank you for your help
think u need to enable ad hoc
Edit forum.xda-developers.com/showthread.php?t=1069569
must have a supporting rom/kernel!!!!!!
To use a usb 3g device you will have to do the fallowing
you will have to be on a rom that supports usb 3g modem . there are roms in the dev section that do support 3g device.. The roms only support a few device models..
Also if you list more information about your tablet Like the rom you are on if your stock or rooted and so on...
The ad-hoc patch as mentioned above is for tethering To your Phone . NOTHING to do with 3g support in any way..
---------- Post added at 08:09 PM ---------- Previous post was at 08:07 PM ----------
mileyxperia said:
think u need to enable ad hoc
Edit forum.xda-developers.com/showthread.php?t=1069569
Click to expand...
Click to collapse
I can not read the font in your signature.. Not complaining just saying .. giggles
mileyxperia said:
think u need to enable ad hoc
Edit forum.xda-developers.com/showthread.php?t=1069569
Click to expand...
Click to collapse
Thanks, but I think ad hoc which is used for conneting with hotspot on cell phone
erica_renee said:
To use a usb 3g device you will have to do the fallowing
you will have to be on a rom that supports usb 3g modem . there are roms in the dev section that do support 3g device.. The roms only support a few device models..
Also if you list more information about your tablet Like the rom you are on if your stock or rooted and so on..
Click to expand...
Click to collapse
I use Thor v14.2 Rom. Maybe this rom does not support my usb. Therefore I upload driver of my 3G stick a (working on Linux PC ) and I hope it is useful. My tablet is A500 bought from USA
i installed jellyblast ROM and my wifi was wworking great and nothing went wrong..Now i updated the rom to 3.0.4 and the wifi stopped working..When i connect it it ssays connecting and then disconnected it keeps repeating that ! i tried changing the advanced settings in wifi to "never" but that didnt work either...Can some please help me with this and can you explain in detail how to fix cuz im not really an expert on my galaxy y:crying::crying:???
mudasir-234 said:
i installed jellyblast ROM and my wifi was wworking great and nothing went wrong..Now i updated the rom to 3.0.4 and the wifi stopped working..When i connect it it ssays connecting and then disconnected it keeps repeating that ! i tried changing the advanced settings in wifi to "never" but that didnt work either...Can some please help me with this and can you explain in detail how to fix cuz im not really an expert on my galaxy y:crying::crying:???
Click to expand...
Click to collapse
first of all its your wifi router's problem!!!if you are using kuro krenel as default in JBv3 !!!if you are using white kernel then flash the wifi drivers !!!
and its a request stop making useless threads like this search button is provided by XDA not for show off use it ,it really solves all the problems!!!:silly
I'm new so I didn't know sorry but I didn't know...
Sent from my GT-S5360 using xda app-developers app
percy215 said:
first of all its your wifi router's problem!!!if you are using kuro krenel as default in JBv3 !!!if you are using white kernel then flash the wifi drivers !!!
and its a request stop making useless threads like this search button is provided by XDA not for show off use it ,it really solves all the problems!!!:silly
Click to expand...
Click to collapse
It's not anyone else's router problem.
It's a kernel problem. So, that kuro posted a fix for it.
MR4Y said:
It's not anyone else's router problem.
It's a kernel problem. So, that kuro posted a fix for it.
Click to expand...
Click to collapse
Bro, my wifi is connecting with JBv3+ kuro kernel and as the OP of this post stated that his wifi was working with OTA 3 !!he was unable to connect to wifi when he flashed ota 4.1!!! connecting problem sometimes happens try switching on/off your router then try its not kuro kernel prob!!! :silly
I am on your side about the useless threads but still you could say it in a good manner.
Sent from my GT-S5360
percy215 said:
Bro, my wifi is connecting with JBv3+ kuro kernel and as the OP of this post stated that his wifi was working with OTA 3 !!he was unable to connect to wifi when he flashed ota 4.1!!! connecting problem sometimes happens try switching on/off your router then try its not kuro kernel prob!!! :silly
Click to expand...
Click to collapse
I dont even know what this "router " thing is? can u please explain in greater detail? please ..thanks!
mudasir-234 said:
I dont even know what this "router " thing is? can u please explain in greater detail? please ..thanks!
Click to expand...
Click to collapse
router means in simple words which transmits the wifi signal!! are using laptop wifi then switch on/off your wifi of your laptop then try!
Really Panicked
percy215 said:
Bro, my wifi is connecting with JBv3+ kuro kernel and as the OP of this post stated that his wifi was working with OTA 3 !!he was unable to connect to wifi when he flashed ota 4.1!!! connecting problem sometimes happens try switching on/off your router then try its not kuro kernel prob!!! :silly
Click to expand...
Click to collapse
I am getting really woried now...none of the networks are even showing up anymore!when i connect it says "turning on" and then it starts scanning for networks but none are showing up!I tried "Add Wifi Network but it seems that ,that is not working either!I really need help , i cant have this phone be messed up cause i cant get another phone....HELP PLEASE!!!:crying::crying:
mudasir-234 said:
I am getting really woried now...none of the networks are even showing up anymore!when i connect it says "turning on" and then it starts scanning for networks but none are showing up!I tried "Add Wifi Network but it seems that ,that is not working either!I really need help , i cant have this phone be messed up cause i cant get another phone....HELP PLEASE!!!:crying::crying:
Click to expand...
Click to collapse
dont worrie flash back to stock rom via ODIN!!
download stock rom of your region and flash read this thread carefully every post and each word link:---> http://forum.xda-developers.com/showthread.php?t=1465800
any problem ask me via message !! now i'am going to sleep, if you don't get it what is stock rom etc search it on XDA !!! don't flash untill you know !!
percy215 said:
dont worrie flash back to stock rom via ODIN!!
download stock rom of your region and flash read this thread carefully every post and each word link:---> http://forum.xda-developers.com/showthread.php?t=1465800
any problem ask me via message !! now i'am going to sleep, if you don't get it what is stock rom etc search it on XDA !!! don't flash untill you know !!
Click to expand...
Click to collapse
Thanks for the help ! I kind of did something and the networks are back!Now its just the other problem , Wifi keeps saying "connecting" ..."disconnected"
does anybody know how i could fix it withoout flashing stock rom? it works if i change the settings in no frills cpu ctrl but i have to change a settings a few times and then it works..but its really annoying
mudasir-234 said:
does anybody know how i could fix it withoout flashing stock rom? it works if i change the settings in no frills cpu ctrl but i have to change a settings a few times and then it works..but its really annoying
Click to expand...
Click to collapse
try flashing your baseband via odin!
Follow the steps in post #2 in the following thread
http://forum.xda-developers.com/showthread.php?t=2047475
Your rom and data will stay as it is don't worry
As we know，the CM10 is more and more perfect！but it a very big problem that Chinese cannot use the wifi.it's always disabled to connect .if it connect success，the internet speed is very low .（my computer with 10M Light soldering）.The wifi on the EP3’s last build （CM9.1）is okey.but I removal the wifi drive from his last build.it will FC with the wifi .so i donot know how to do.
one-piggy said:
As we know，the CM10 is more and more perfect！but it a very big problem that Chinese cannot use the wifi.it's always disabled to connect .if it connect success，the internet speed is very low .（my computer with 10M Light soldering）.The wifi on the EP3’s last build （CM9.1）is okey.but I removal the wifi drive from his last build.it will FC with the wifi .so i donot know how to do.
Click to expand...
Click to collapse
Please report in the specific cm10 thread. !!!DON'T OPEN A NEW ONE!!! Keep the forum clean!
You can try this one.
View attachment tiwlan.7z
Replace the configuration file tiwan.ini here : /system/etc/wifi/tiwan.ini and set the right perm.
Do not touch other quarx's cm10 wifi files. It works perfect here.
Wrong place to post
one-piggy said:
As we know，the CM10 is more and more perfect！but it a very big problem that Chinese cannot use the wifi.it's always disabled to connect .if it connect success，the internet speed is very low .（my computer with 10M Light soldering）.The wifi on the EP3’s last build （CM9.1）is okey.but I removal the wifi drive from his last build.it will FC with the wifi .so i donot know how to do.
Click to expand...
Click to collapse
Post in Question section or post in bug tracking .
This is the wrong place to post !!
bleedlinux said:
Post in Question section or post in bug tracking .
This is the wrong place to post !!
Click to expand...
Click to collapse
sorry，where should I post ，please give me an link.thanx