Yeah,I've tried using WIUI, almost all versions of CM and I'm still unable to have a working Wi-Fi. I heard that there are some apps that can help me out, or am I wrong?
What happens: I click "connect", it tries to, but then fails and tries again.
Does Wi-Fi work in stock Rom? If not then you must check security settings in the Wi-Fi router. For eg. In WPA settings AES+TKIP does not work, only one can be selected.
Sent from my MB526 using xda premium
thekguy said:
Does Wi-Fi work in stock Rom? If not then you must check security settings in the Wi-Fi router. For eg. In WPA settings AES+TKIP does not work, only one can be selected.
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Ofcourse it does. Only on custom ROMs it doesn't work.
Deformat said:
Ofcourse it does. Only on custom ROMs it doesn't work.
Click to expand...
Click to collapse
Try changing the security to WEP , 64 bit.
Sent from my MB526 using xda premium
Your problem cannot be for all custom roms. At the very least stock based stable roms such as ms2ginger must work. There are reports of Wi-Fi issues with the latest cm10 build and 2ndboot cm9, though I have had no such issues. Roms apart from these should not have any such problems. So if you're on such builds, try others such as ms2ginger.
Sent from my MB526 using xda premium
Related
Hello.
I installed this rom on my Rogers(Canada) X10. Everything went fine. But I have no wireless at all now and it says baseband unknown. I tried looking for APN settings but there's nothing there under mobile networks. This is my first time installing custom firmware and I'm rather lost. Can anybody help me please?
Hi
Did you make sure your on the correct baseband?
Did you flash a custom kernel?
Hi, I had same issue. What worked for me was using the Dev tools app and selecting bad behaviour then crash the system server. Phone rebooted and has been working fine since. Might be worth a try?
Sent from my X10i using XDA Premium App
Flash cm6bb49.zip
Sent from my X10i using XDA App
I read the Q&A but it seems that in order to select a baseband, I need to know what is is? But I can't because the system doesn't tell me. As for kernels and such, I'm at a complete loss lol. I just followed the instructions here: http://forum.xda-developers.com/showthread.php?t=945264 for installing the firmware.
rokca33 said:
Flash cm6bb49.zip
Sent from my X10i using XDA App
Click to expand...
Click to collapse
I tried flashing using xrecovery and nothing changed. Still no baseband information.
andrewbowes said:
Hi, I had same issue. What worked for me was using the Dev tools app and selecting bad behaviour then crash the system server. Phone rebooted and has been working fine since. Might be worth a try?
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
Nevermind. This worked! Although I tried it before ?_? Thanks guys!
i'm flash kernel 3.0.8 V2 ,and dalvik,wifi cannot open.anyone can tell me why?
Do you have a Mac address? Sometimes it gets lost
Sent from my U8800 using xda premium
mac is not 0,open wifi button reboot can open wifi.but shut off cannot open.
mrasquinho said:
Do you have a Mac address? Sometimes it gets lost
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
mac is not 0,open wifi button reboot can open wifi.but shut off cannot open.
Try to do a clean install, wiping everything
Sent from my U8800 using xda premium
Do you have a WEP network because it doesn't work with the new driver used by the kernel
hi there, its easy as you say i think the problem is with permissions, give permissions manually to the wlan modules thenh restast or in cmw fix permitions and its working nice and easy.
do the trick worked for you???
Hey all, i just installed Quarkz's JB rom, and everything is great. except for one thing. I cant seem to get 3g (or any kind of mobile data for that matter) to work. i know on some older cm7 roms i used, they had some kind of app that allowed you to pick the correct (data band)? for your area/country. is there anything like that for this rom?
Settings, Advanced. Baseband changer is in there.
Sent from my MB526 using xda app-developers app
Hello SwiftAdvance install the Rom, but when trying to connect via wifi it never connects, any suggestions to fix this?
What recovery version do you use?
Sent from my GT540 using Tapatalk 2
This normally happens when installing custom ROMs. The WiFi doesn't connect. Don't worry there are many ways to fix this. One way being to flash a WiFi driver. One that is compatible with your kernel.
Sent from my GT-I8160 using XDA Premium 4 mobile app
Can b with kernel?
SethMartin said:
Can b with kernel?
Click to expand...
Click to collapse
I dont think so, , i think its with the process of flashing esp when recovery is on older version
Sent from my GT540 using Tapatalk 2
Blake Blader said:
What recovery version do you use?
Sent from my GT540 using Tapatalk 2
Click to expand...
Click to collapse
I used two versions Leoposas recovery 6.0.2.7 and other version 6.0.2.8
what recovery version do you recommend?
:laugh:
TellaReese said:
This normally happens when installing custom ROMs. The WiFi doesn't connect. Don't worry there are many ways to fix this. One way being to flash a WiFi driver. One that is compatible with your kernel.
Sent from my GT-I8160 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
my problem with wifi is detect networks, but hangs waiting for you to assign IP and try putting my router without password
elotes said:
I used two versions Leoposas recovery 6.0.2.7 and other version 6.0.2.8
what recovery version do you recommend?
:laugh:
Click to expand...
Click to collapse
the latest
Blake Blader said:
the latest
Click to expand...
Click to collapse
Right now i usted the version 6.0.2.8 and still the same problem, what version of CWM you use?
Hello XDA. I have problem with my International LG G2 (D802) with my NFC. I go to settings and turn on NFC and after a 15 seconds turning on the nfc greyed out again. Like self turn off. I don't get it. when i restore to stock firmware the same problem.
Any solution for that?
I am using CloudyG3 1.3 ROM
Thanks!
Could it be a problem with the kernel? If not you may have a botched device.
How can i know about the kernel and how to change it or something to see if it works becouse of that? Thanks
Sent from my LG-D802 using XDA Free mobile app
sai777 said:
Could it be a problem with the kernel? If not you may have a botched device.
Click to expand...
Click to collapse
And when i turn on its blinking and then again turn it off. Help!
Sent from my LG-D802 using XDA Free mobile app
You can check your kernel through ADB. This is the input you put, without quotes.
"adb shell cat /proc/version"
And to change kernel, you simply do what you do when flashing a rom and flash the new kernel.
sai777 said:
You can check your kernel through ADB. This is the input you put, without quotes.
"adb shell cat /proc/version"
And to change kernel, you simply do what you do when flashing a rom and flash the new kernel.
Click to expand...
Click to collapse
Can u link me to some newer version of kernel that i can download and flash it?
Sent from my LG-D802 using XDA Free mobile app
matt_62 said:
Can u link me to some newer version of kernel that i can download and flash it?
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Always make a nandroid backup through recovery.
I would suggest you use either Dorimanx (http://forum.xda-developers.com/showthread.php?t=2725023) or RenderKernel (http://forum.xda-developers.com/lg-g2/development/kernel-render-kernel-aosp-lg-roms-t2803929).
Dorimanx is for Stock Rom while use RenderKernel if you want to go to AOSP based roms.
sai777 said:
Always make a nandroid backup through recovery.
I would suggest you use either Dorimanx (http://forum.xda-developers.com/showthread.php?t=2725023) or RenderKernel (http://forum.xda-developers.com/lg-g2/development/kernel-render-kernel-aosp-lg-roms-t2803929).
Dorimanx is for Stock Rom while use RenderKernel if you want to go to AOSP based roms.
Click to expand...
Click to collapse
I flashed dorimanx new kernel and still not working. Any other ideas?
Sent from my LG-D802 using XDA Free mobile app
matt_62 said:
I flashed dorimanx new kernel and still not working. Any other ideas?
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
Then I'm guessing the problem is a hardware one. Have you ever dropped or bumped your phone? Even if you haven't have how long has this problem been occurring? Ever since you bought the phone or recently. This is because even though it could be a software problem, if you flashed the roms and kernels correctly, there shouldn't be any nfc issues in all of them. So in any case, I suggest you try to get the phone replaced or fixed.
sai777 said:
Then I'm guessing the problem is a hardware one. Have you ever dropped or bumped your phone? Even if you haven't have how long has this problem been occurring? Ever since you bought the phone or recently. This is because even though it could be a software problem, if you flashed the roms and kernels correctly, there shouldn't be any nfc issues in all of them. So in any case, I suggest you try to get the phone replaced or fixed.
Click to expand...
Click to collapse
Ok thanks!
Sent from my LG-D802 using XDA Free mobile app