Database Users

Totally bricked my Samsung Galaxy Tab P-i9000

Hello - I urgently need help with my Samsung Galaxy Tab.
I flashed a wrong PIT/PDA & what happened is:
- my Galaxy Tab does not reboot at all
- the flashlight in the back suddenly switched ON automatically
No matter how long I press the Power Button, the device switches off just for one second, and then the flashlight switches ON again - but no reboot.
I cannot get into download mode / when I try to use commands with Odin, it only says: error: device not found.
Odin does show my device ([COM:4]), it appears as: Added // only the download mode does not work!
When I tried to start SuperOneClick, trying to Unroot, it is stuck with: "Waiting for device"
Weirdly, though, my netbook does install the drivers automatically when I plug it in. Which means, my netbook can "read" the device.
Does anyone here know how I could make the extreme Hard Reset, without having to reboot?
--------------------------
If you think this post should rather go to the Developers section, please feel free to move it // I am thankful for any help

Have you tried connecting to it with ADB to see if you can reach it at this level (apart from with SuperOneClick)? Try installing the Droid Explorer application on your Windows PC and see if it will recognise your Tab. If it will you should be able to initiate a reset from the Droid Explorer UI. If it won't I would suggest that you are hard bricked and it will have to visit Samsung. Good luck!

Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.

QueenAmy said:
Hello,
thank you for your advice.
adb does not detect my device ..
and, unfortunately, neither does Droid Explorer
Just find it so strange that ODIN does ..
but like you said -
I am also afraid, that this is a "hard brick" & I will go see the retailer tomorrow.
Thank you, though, for offering help.
Click to expand...
Click to collapse
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?

rotohammer said:
If Odin sees it, its not bricked. What image is on the LCD when Odin sees it, or is it blank?
Click to expand...
Click to collapse
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.

bdl1969 said:
I guess the problem here is that even if Odin sees the USB device connected, if the Tab won't go into download mode then it's as good as bricked. With the SGS you can construct a USB jig with a 301k resistor between pins 4 and 5 of the micro USB to push the device into download mode if it won't respond any other way. I wonder if a similar thing would work for the Tab... Sounds like a challenge for someone who has two Tabs and doesn't mind experimenting a bit with one of them.
Click to expand...
Click to collapse
lol, I'll get my cheap Chinese Tab cables this week and hack one up to test.
My guess is that Odin will only see the Tab when it is in download mode. Id try flashing it in that state and find out for sure. It sure cant hurt.

You went to your retailer?I have exactly the same problem!!

First of all - THANK YOU for having started this discussion.
Yes, I went to the retailer. My Galaxy Tab is with Samsung Technical Support now; will keep you posted.
To answer some earlier questions, yes ODIN did recognize my Tab; but the screen on the Tab remained totally black. Only this strange "flash" light on the back kept glowing.
rotohammer, if you really get to test what you mentioned before, I'd be interested to hear what happened - but, personally I would not recommend it, unless you are sure you want to risk completely ruining your dear Tab.

studio54 said:
You went to your retailer?I have exactly the same problem!!
Click to expand...
Click to collapse
I did ... and less than 2 weeks later ..
Update:
13-Jan-2011
Today noon I got a call from my retailer my Galaxy Tab was ready to be picked up & I was really lucky: my retailer said the repair would normally cost EUR 650.-
.. as I had damaged the whole mainboard ..
but as the Tab was less than 1 month old, they were so kind to do it w/in my warranty - so I did not have to pay for it.
I'm very relieved, as you can imagine.
Got my Galaxy Tab back with a brand-new mainboard, everything is working well &
I sure learned my lesson.
I will not flash the Galaxy Tab again.
Only because Galaxy Tab and Galaxy i9000 are both on Froyo, it does NOT mean that you can flash the same software!
I wanted to apply the 3 button combo fix on my Galaxy Tab but apparently it does not work!

Bricked mine as well, but mine is a weird case
I bring up the weirdest case of bricking so far, i was on an official Arabic (P1000JPJK2)Firmware, and i noticed a new Arabic release on SamsungFirmware.com (P1000JPJM3) i downloaded it and downloaded the .pit file, Started Odin v1.7 and unchecked repartition, selected the PDA and the pit and started the processes, odin finished and Reseted the device and give me the green light with the word PASS, however, the my p1000 decided to reboot into download mode automatically, so i rebooted the device manually and got stock in the Samsung Logo and keeps looping. so i decided to go back to my previous Rom but it will always fail and i would have to reboot my tab and it will show the good ol' Phon-PC logos, however, odin would see it and would flash anything i want. i tried flashing various versions of rom's but they would all fail... i tried repartition checked and unchecked and nothing worked, so lastly i decided to flash the .pit file alone and that worked and got me back to where i was stuck in the Samsung logo loop and no ROM would be flashed through Odin BUT the (P1000JPJM3) but it still will not boot! and funny enough i took it to sammy's repair shop and they told me to come pick it up in a few hours but they told me that they failed to repair it and they would need to keep it till tomorrow, but they guy was not that optimistic about getting it repaired and to make things worse i couldn't get unrooted so there is a good chance that there will be no warranty... does this mean that i bricked it for good? please help me.

Galaxy S Completely Bricked - Please Help!

Ok so, where do I start. My sister decided she wants a custom ROM on her galaxy s. So I rooted it, and after much trying, discovered that I could not get into download mode. So I flashed through ODIN, believing that I had now fixed the problem. I then went along, used ADB to get into download mode, installed clockworkmod, and tried to flash CM7. This is where things went pear shaped, the phone will now not do anything, If I switch it on, i just get the black and white galaxy s screen, and nothing else. I cant get into download mode with the 3 button combo, and if i connect it to the USB it does not connect to the PC in any way, is it completely bricked? Or is there some magical way to fix it???
Thanks hope I get some help
UPDATE: I made a USB Jig and it worked perfectly! The phone is all good now thanks everyone. This thread can be deleted if needs be!

I guess you need to buy or make a USB JIG!
http://forum.xda-developers.com/showthread.php?t=819551
edit: You can also try removing the battery for 1 minute, hold power, vol. down and home key and then put the battery in.

Buy/Make a USB Jig
When uve got ur Jig - Remove Battery - Reinsert Battery - put Jig in - Don't Touch any Buttons - When Download Modes comes up remove Jig - Flash With a Stock Rom From samfirmware
the USB Jig Will Force the Phone into Download Mode

ok ya, i know about the USb jig, only thing is, any idea where I can get one in South Africa? lol, my soldering skills are not up to scratch?

Chiller89 said:
ok ya, i know about the USb jig, only thing is, any idea where I can get one in South Africa? lol, my soldering skills are not up to scratch?
Click to expand...
Click to collapse
Well.. ebay?

There are many "technical support shops" where you can drop your phone and they will re-flash it for free (as long as you have the bill). They have their own "usb jig".

What about recovery mode (hold power, vol. up and home key) ?
Also retry to get into dl mode several times...it might not have worked the first time...good luck for you..

got one from ebay
look for "Fix Download Mode USB Jig Samsung Galaxy S"
it worked like a charm

Try this.

Glad it worked for you.

A quick question about where you bought the jig bits?
Chiller89 said:
UPDATE: I made a USB Jig and it worked perfectly! The phone is all good now thanks everyone. This thread can be deleted if needs be!
Click to expand...
Click to collapse
hi, I just wanted to know how easy it was to find the parts for making the jig, I'm based in Johannesburg and am looking to make a jig for my Galaxy S2 to clear kernel counts and the Exclamation triangle.
Any help would be great thanks.

need help wit sgt-p1010, please!!!!!!!

hey guys is will need some help with this device im not kind of a noobie on this kind of things bcs i been working with several phones, like the veteran xperia10, galaxy ace, motoroi2, etc etc. but never with a tablet
here is what it happens a friend ask me if i can upgrade his sgt-p1010 to a newer version, honeycomb or maybe ics, i´ve read a lot of posts regarding this on how to upgrade it trough odin everything was fine until the reboot of the device, bcs by my mistake i flash a rom of the 7.7" tab and this one is a 7" only now the tab is not turning on, odin is not recognizing it, either samsung kies or the pc. buttons are not responding it wont charge and cant enter to download mode.
I REALLY NEED HELP FROM U GUYS, HOPE U CAN HELP ME
ps. srry for my english :laugh:

This kind of thing can result in the inability to boot which can only be repaired by the use of specific hardware, i.e. this could be a "hard brick". Then again, maybe it can be restored to working order by flashing it again (a "soft brick"). So the very first thing you need to know is, can it get to download mode?
Turn it off, if it's switched on, and charge it for a couple of hours,say four hours. Use the original charger connected to mains. It doesn't matter if it shows anything, or nothing on the screen, let it charge. This is to make sure flashing it won't fail because it doesn't hold a charge.
Now connect it to the PC with the original USB cable. Then after making sure it's switched off, switch it on by pressing the On/Off button, while simultaneously the Volume UP switch. Press them both at the same time, and keep them pressed! If you're lucky you'll get the yellow graphic with the download text. A phone symbol, an !, and a PC symbol is fine too. Even if it doesn't show anything, you may be in download mode, so install the right drivers, and hopefully Odin or Heimdall will recognise is, and will allow you to flash the right ROM.

well i already let it charge for all night long and nothing happens after i perfomed the flashing the screen was totally in black but it doesnt shoes anything i mean the tab was turned on, then apparently batterie dies and after that is not charging. already tried with the heimdall thing but it says that device is not connected.
I think that this is going to be a HARD BRICK
so do u thhink there is another way to solve it?????
or it will be necessary the JTAG stuff???? bcs i dont want to try that it seems that is very difficult to me bcs i dont know nothing about hardware jejejeje

You have installed the Heimdall driver? It's called zadig.exe. Then you have to go to download mode and connect the Tab to the PC with the USB cable. Then Heimdall hopefully will detect the Tab.
If there's no way software will revive the Tab, it's hard bricked and will need hardware to get it working again. There's this guy mobiletechvideos.com who will repair any kind of brick. Basically he uses the JTAG on the board of the Tab and a special box to flash the right ROM to the Tab, even when it's dead. Some here have tried the service, and they say he's quite reliable. Another way is to modify your Tab with Adam Outler's Unbrickable Mod. It's brilliant, you can't soft brick your Tab after that, but it involves soldering very small components on the board of the Tab. The mobiletechvideos guy can do it for you I believe.

Well, I guess you just got a hardbrick .
The only way to fix this problem is go to SAMSUNG SERVICE CENTER.
Sent from my GT-P1000 using xda app-developers app

System Software Not Authorized Error AT&T

Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.

VaRMiT said:
Im sure you all have heard this one before. But I think mine may be alittle different. Im getting the error, System software not authorized etc. I bought it off of someone. I have odin 3.07 and it doesnt show the COM ports. I got USB drivers for samsung cellphones. I also got the stock ROM downloaded. I guess the question is, is there a way to flash this back to stock from the SD Card? I noticed this. I unplug the USB cable. The phone turns off. It does not come on unless the USB cable is hooked up. So I dont know if this means anything different. This phone has never been hooked up to this computer. It shows a Unknown Device in my device manager. Its hardware ID tag is USB\UNKNOWN. It is showing the SECURE FAIL: KERNAL. Can someone point me in the corrrect direction. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....

rayburne said:
I'm guessing you when you bought it the phone booted is this correct?
If yes, what firmware is on it?
What have you done that no longer allows the phone the boot (did you flash something with Odin)?
The more info the better....
Click to expand...
Click to collapse
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.

VaRMiT said:
Ive done nothing. I can get it to the POWER, VOL DOWN, HOME BUTTON and it shows the droid Downloading .....
I have no clue what firmware is on it.
Click to expand...
Click to collapse
So you bought the phone and it has never booted for you?
If you have MF3 bootloader on there and someone tried to install a custom recovery it could be soft bricked.
Not sure what to suggest if you don't know what occurred to cause the phone to only go into download mode?
You could take it to best buy with a samsung experience center and have them reflash it?
The only problem with this is if you don't have MF3 bootloader, best buy will flash it and upgrade it.....

Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk

rushi.1986 said:
Try to Odin MDL on it first
Sent from my SGH-I337 using Tapatalk
Click to expand...
Click to collapse
When you mean MDL. thats the stock rom correct? I do have that. When I look at Odin, it doesnt show anything on the COM part at the top left. Like its hooked up to a com port.
What I meant by the Downloading ...... (with the driod logo guy) Im saying I can get it to do that. Im at the point where I cant get the S4 to be reconized by ODIN. I have the stock rom, odin 3.07 files. I have tried to install the samsung usb drivers....

Still no reply on how to fix this? I have no clue on what to do here. I dont know what firmware etc is on it. I bought it this way. I just want to flash it back to factory, its the att version. It only stays on when the usb is hooked up. I can get it to go into download mode. But on the computer, it doesnt show a usb device being found. I can start odin up, but nothing appears on the COM to show what com port is available. Is there anything I can do here off of a SDCard? I also need to mention that I can not hold down vol up and power and home button to get it to go into recovery mode. It flashes it fast and goes to the yellow triangle.
Anyone please.....

You need to get Odin to recognize it. Try different usb cables. Use the usb ports on the back of the computer. Try a different computer. Without knowing the firmware you're on odin may not work, but it should still recognize your device. If you're on mdl firmware Odin will work. If you're on mf3 then you're sol.

Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app

Br4nd3n said:
Have you tried to get into the recovery and not just the download mode?
Volume up + Home + Power - If you can get into a recovery try to do a factory reset.
If you cant get into the recovery than you'll need Odin. Sometimes (rarely) kies well affect Odin. If you have kies uninstall it and than run odin.
- Open Odin without your phone connected.
- Power on your device, go into download (Odin) mode. Volume down + home + power.
- Now plug device into your computer.
- Odin should read it, unless its MF3 firmwire.
If your phone is MF3, you may need a Samsung bestbuy rep to reflash the mf3 firmwire.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have tried the power, vol up and home. It flashes the recovery, then goes back to the triangle. Odin, doesnt show a COM port that the phone is connected when i have it in download mode.
Also....i do appreciate you all for helping me figure this out.

[Help pls] Note 3, not responding: Bricked? Installing Lineage OS

I just bought a BNIB Note 3.
Samsung Note 3: SM-N900W8
Symptoms: Won't turn on, no lights, no load screen, no recovery mode, no download mode.
When I hook the phone up to the PC via USB it does vibrate and sounds the connection ringtone
What I was doing when this happened:
I had just recently rooted using "KINGRoot" - checked root and it was successful
I installed "TWRP" and booted into recovery mode and it was a success as well(I didn't actually run here yet)
***I installed and opened "Flashfire" to Flash the LINEAGE OS to my Rom buuut I didn't actually select the Lineage pack and I accidently pressed FLash(insert expletive here) *****
So Flashfire went through it's loading and when it was done it shut off and then the symptoms started.
It's a Note3 from Bell with all of their bloatware on it and I wanted to clean it all off and run a clean/efficient Note 3 cell with Rogers. I'm not looking to keep any of the data currently on the phone as there isn't anything currently on it. I just want to be able to install Lineage and use my Note.
I've searched for 30 hours pretty solid so far and unfortunately I haven't come across a clear solution. Can anyone give me a diagnosis and a tutorial or a link to a fix.
I'm open to loading from MicroSD, USB Jig, Samsung Kies....anymore information you require from me as away and I'll get back ASAP

Dead battery would be first check .

JJEgan said:
Dead battery would be first check .
Click to expand...
Click to collapse
Battery - I did the "spin" test on the battery and it doesn't show any physical characteristics of an overheated(bulged) battery. I'm going to test fit my battery into another note3 and I'll respond asap.

JJEgan said:
Dead battery would be first check .
Click to expand...
Click to collapse
I tried the battery in another Note3 and my battery is 52% charged and had no issues booting the tester phone.
I have the phone being tested for any Hardware issues right now.
If it's not a hardware issue will I be able to force a Rom(whether OEM Firmware or other) to install via MicroSD or USB jig?

When the phone is connected to a Windows machine, does a new device appear in device manager?
Have you tried to force it into download mode with a USB jig?
For flashing ROMs to the sm-n900w8, the simplest method is to flash TWRP, boot to TWRP, wipe everything, and flash the desired ROM.
If nothing works, you could take it to a cell repair shop and hopefully have it repaired with a jtag cable or a similar method.

audit13 said:
When the phone is connected to a Windows machine, does a new device appear in device manager?
Have you tried to force it into download mode with a USB jig?
For flashing ROMs to the sm-n900w8, the simplest method is to flash TWRP, boot to TWRP, wipe everything, and flash the desired ROM.
If nothing works, you could take it to a cell repair shop and hopefully have it repaired with a jtag cable or a similar method.
Click to expand...
Click to collapse
No, the PC doesn't see the phone.
The USB jig or MicroSD force is something I'm researching to try next(feel free to provide any good links to set up a jig(I've done this with Ubuntu on my laptop but this has a more intimidating feel to it)). The Tech at the shop I took it to test the hardware says "the motherboard" is broken and he'll fix it for $60.
For future considerations I'll learn to use TWRP flashing ROMs.

If the shop is offering to fix it for $60, they may be just force-flashing the firmware with something like an Octopusbox.
The USB jig may force the phone into download. If it doesn't, I don't think you'll have a choice but to pay to have it flashed. Unfortunately, Samsung will not help as rooting would trip the knox counter.

USB jig ebay are the usual cheap source.