Database Users

[Q] allow mock locations

Our nook touch's don't have the ability to allow mock locations for using tetherGPS.
It is usually found Settings->applications->development but we don't have Applications tab under settings.
Any ideas how I can get a touch to allow mock locations? Rooted running touchnooter.

Or, since running 2.1 it is host usb so that can't receive usb data, I have to use serial data. I have found serial pins under the sd card slot. Anyone have any ideas to see if touchnooter has the gps libraries? Yep, I'm a noob so maybe not even asking it properly.
Any feedback on getting GPS to work would be appreciated! thanks

lolokai said:
Our nook touch's don't have the ability to allow mock locations for using tetherGPS.
It is usually found Settings->applications->development but we don't have Applications tab under settings.
Any ideas how I can get a touch to allow mock locations? Rooted running touchnooter.
Click to expand...
Click to collapse
Assuming you have rooted your N2 and know how to use adb with it:
Code:
#adb pull /data/data/com.android.providers.settings/databases/settings.db settings.db
#sqlite3 settings.db
Code:
sqlite> update secure set value=1 where name='mock_location';
sqlite> .q
Code:
#adb push settings.db /data/data/com.android.providers.settings/databases/settings.db
#adb reboot
To verify it working you can fetch an app called "My Fake Location" from the market and use it to set your mock location

Just tested the above solution with TetherGPS Lite and my X10 as server and it worked just fine.

thank you ros87
I can't get my laptop to recognize my NT yet but I will figure that out.
So basically, I run adb and paste that code for first section. ADB pulls that file.
I then run? sqlite to get that variable changed, then push the file back? I am researching all I can but this is all new to me so thanks again for your feedback.

I found the easiest way to get laptop to recognize the nook by using ADB Wireless app, way simpler than messing with usb drivers etc.
When I ran the first pull command, it says: remote object does not exist '/data/data........
In sqlite3 I tried to change the values and it came back with:no such table: secure
So it seems it doesn't have that code. Back to square one. Touchnooter seems to run nook color so any code would be that of nook color (I think).
Any idea on how to proceed now? Can I create table and then push it?

lolokai said:
In sqlite3 I tried to change the values and it came back with:no such table: secure
So it seems it doesn't have that code.
Click to expand...
Click to collapse
This is not possible. secure table is the same table where you enable non-market install (e.g. with touchnooter). There has to be something wrong in the command you have use.

cceerrtt said:
This is not possible. secure table is the same table where you enable non-market install (e.g. with touchnooter). There has to be something wrong in the command you have use.
Click to expand...
Click to collapse
I just read this:To use sqlite3 locally, instead of within a shell, pull the database file from the device and start sqlite3:
Copy a database file from your device to your host machine:
adb pull <database-file-on-device>
Start the sqlite3 tool from the /tools directory, specifying the database file:
sqlite3 <database-file-on-host>
So since I couldn't pull the database as I mentioned, that is why sqlite3 coulnd't find the table.
Any ideas on why I can't pull the database?

Is your devices properly connected? Do you see nook in "adb devices" output?
Are you able to pull any other file?
Is the filepath in the command correct?
Why don't you copy & paste the terminal log? Much easier than let us guess what's wrong.
Update: another option - you should be able to use boot with noogie sdcard and copy that db file directly to your computer.

Device is connected. I will research how I can copy terminal log and paste that here. I was typing the post below when I saw your post but will work on terminal log.
If the goal is to change a value in sql, I just downloaded an app called SQLite Editor on the NT and changed the mock location variable from 0 to 1 there. I can see why it didn't pull the code in previous tries as i was not there on my system. The route for anyone else trying to get this done via SQLite:
settings storage>settings.db/secure
As a non-programmer flailing through this I found adb wireless app much easier than screwing with usb stuff which I never did get ADB (win7) to recognize device via command prompt. Also the SQLite editor is much easier than messing with ADB. Again, these are noob workarounds for someone who doesn't know that much about android stuff.
Alas, I still can't get TetherGPS to work. It says from the widget I can allow mock locations and turn on GPS but there are no menu items I can see from the widget. Also, I put in the IP address I used from ADB wireless- is that what I should use on both server and client? I did run a GPS toggle app and turned on GPS, no idea what that does but it didn't FC and stays 'on'. No response from Compton Soft who made the app.
Any ideas? Paypal ready for whomever can get me closer to running GPS on a Nook Touch, I might be able to get it but at this rate, it will take a long time.

I got the NT to see the GPS but it wasn't updating. I was using TetherGPS lite and when I bought TetherGPS, it showed some GPS data.
As ros87 said, My Fake Location is the way to get the NT to Allow Mock Location.
Now I have to see how to get the GPS to send data fast enough so the app I use can be of value.
I feel like the guy on the car forums who is troubleshooting the ECU but doesn't know how to change spark plugs lol. Thanks ros87 and cceerrtt!

com.android.providers.setting should be com.android.providers.settings to pull the file

Thiso said:
com.android.providers.setting should be com.android.providers.settings to pull the file
Click to expand...
Click to collapse
Thanks mate, fixed!

Can't sideload onto NSTG

Firstly i rooted with GlowNooter, but the market wasn't working, so I figured might as well go with tinynooter as I don't any other gapps.
I've successfully rooted with tinynooter now, but I'm not sure how I can sideload applications. I have them copied onto the sd card, but how do i navigate to the sd card? The supermanager that's included isn't working
And amazon appstore doesn't work for me since I'm outside of the USA.
What's the easiest way to get a file manager installed (or is there one somewhere im unaware of) ?

What you need to do is set up ADB on your computer - ADB = Android Debug Bridge, and you can use it to install apk files to rooted devices.
ADB wireless, included in glownooter and tinynoot, lets you issue ADB commands to your device over the wireless connection, eliminating one hassle that many folks have - getting ADB running over USB. I think but don't remember for sure that you need to have the "allow non-market apps" tickbox ticked in the Nook Color tools for this to work.
The command to install an app via adb is just
adb install appname.apk
(that assumes that you are running the command from the same directory that you have the APK sitting in on your computer.)
To install files that you already have copied to your device, you can do:
adb connect x.y.a.b
where x.y.a.b is your wifi IP address
then (with tinynoot; glownoot users don't need this step, I don't think)
su
then
cd /sdcard
pm install appname.apk
(pm is the android package manger, which you are running directly in this case.)
How do you install ADB?
written guide:
http://forum.xda-developers.com/showthread.php?t=879701
video guide:
http://www.xda-developers.com/xda-tv-2/pro-tip-number-4-installing-applications-using-adb-xda-tv/

Thanks a dozen, I was just reading up on that, and i managed to get it to work

How to uninstall applications?

Hi!
I've just rooted NST with NookManager.
I'm a total noob in android world (as I don't have any smartphone) and I'm searching for basics about rooted android devices since two days but I didn't come to a solution to my problems.
Simply I want to uninstall some apk as described in this thread http://forum.xda-developers.com/showthread.php?t=1933615
I don't have titanium pro or root explorer.
How to install/uninstall apps and how to take full control about entire nook file system?
Thanks

yell! said:
Hi!
I've just rooted NST with NookManager.
I'm a total noob in android world (as I don't have any smartphone) and I'm searching for basics about rooted android devices since two days but I didn't come to a solution to my problems.
Simply I want to uninstall some apk as described in this thread http://forum.xda-developers.com/showthread.php?t=1933615
I don't have titanium pro or root explorer.
How to install/uninstall apps and how to take full control about entire nook file system?
Thanks
Click to expand...
Click to collapse
It depends on the Launcher you are using.
By default you should have "ReLaunch" installed.
To uninstall an apk, just select it in the app list and hold for a little bit longer. A dialog containing "uninstall" option the should pop up.
The other way is to use "NookColorTools".
http://forum.xda-developers.com/showthread.php?t=868366
Install it , run it, select "manage applications", select certain apk, uninstall it.
edit : you should probably place 'NookColorTools' in /system/app/ using ADB
######################################
Installing apk's
1 way - put 'some_app.apk' on mSD card and select it using any file manager.[/COLOR]
2 way - configure ADB, connect your nook and type 'adb install /your_apk_location_on_harddrive
3 way - install Google Play using 'NTGAppsAttack', install "searchmarket.apk" (i uploaded it somewhere, check my posts), search for apk in google play and install it.
#############################
To uninstall a system apk
Read the forum before deleting any system apk's.
Most of them are necessary for the system to work.
1 way - get any file manager that can mount root partition (Rhytm file manager ; ES file explorer) , select "root explorer" in options, navigate to '/system/app/', Move/delete any apk that you desire.
2 way - configure ADB, connect nook, type 'adb shell', 'mount -o rw,remount /dev/block/mmcblk0p5 /system', 'cd system', 'cd app', 'ls' (to see apk list), 'rm apk_name.apk'.
#############################
To install a system apk.
configure ADB, connect nook, type 'adb shell', 'mount -o rw,remount /dev/block/mmcblk0p5 /system'
exit ADB, from your system type 'adb push /your_apk_location /system/app'
#############################
If you encounter problems with installing from mSDcard search for "howto allow install non market applications on android'.
Remember that only Apk's for Android 2.1 will install. 2.2+ versions will give you an error.

That works great except for MetroUI and Apple 4S. Neither of which seem to want to uninstall from the play store and there's no app entry to hold down on to force deletion.
Plus ESfilemanager isn't letting me go to the system menue else I'd delete the apk there and while ReLaunch /will/ for some reason let me go to /system/apps since it won't let me move the library.apk back to the app folder from backup I'm not sure I trust it to not somehow fubar a delete.
Plus my sister deleted my nook backup image.
Any ideas how to safely clear these thins for someone that's clueless on how to use ADB from ubuntu 12.04? A link to an idiot's guide would be nice if nothing else.

Goggles2114 said:
That works great except for MetroUI and Apple 4S. Neither of which seem to want to uninstall from the play store and there's no app entry to hold down on to force deletion.
Plus ESfilemanager isn't letting me go to the system menue else I'd delete the apk there and while ReLaunch /will/ for some reason let me go to /system/apps since it won't let me move the library.apk back to the app folder from backup I'm not sure I trust it to not somehow fubar a delete.
Plus my sister deleted my nook backup image.
Any ideas how to safely clear these thins for someone that's clueless on how to use ADB from ubuntu 12.04? A link to an idiot's guide would be nice if nothing else.
Click to expand...
Click to collapse
>TUTORIAL - EVERYTHING ABOUT ADB - Fully Illustrated
http://forum.xda-developers.com/showthread.php?t=1241935
-use ADB to install NookColorTools
-go to 'manage applications' (in NCT)
-delete what needs to be deleted
Deleting files is needed only when you want to get rid of a system app.
Don't forget to mount system partition with write permissions. Otherwise you will not be able to copy NCT to /system/app/

You are a lifesaver (and is this thing pinned? I don't recall seeing it pinned. Hell best way of hiding a thread is put it at the very top with a sticky and making it red blinky bold letters.)
OK derp. That guide's windows. Need something linux-centric. I've a feeling after the initial setup it's similar
On command line 'adb devices' gets me nothing even with nook in usb mode.
Edit again: http://rootzwiki.com/topic/20770-gu...-adb-and-fastboot-in-linux-ubuntu-and-mint12/
Using that guide. Will edit/respond with results.
Edit the Third: Odd. Didn't have ot use ADB. ReLaunch let me install. Now to figure out wtf about mountingaccessing internal storage as root.

Thank you for your replies!
I prefer the ADB method via USB, I do not like to modify things by touch screen.
I installed ADB, server is running and nook is connected by usb cable, but no devices are found
Google does not help me (or I am failing with keywords) and I do not want to use a wireless connection.

yell! said:
Thank you for your replies!
I prefer the ADB method via USB, I do not like to modify things by touch screen.
I installed ADB, server is running and nook is connected by usb cable, but no devices are found
Google does not help me (or I am failing with keywords) and I do not want to use a wireless connection.
Click to expand...
Click to collapse
Make sure you have the driver installed properly. See the wiki article on installing the ADB driver for the Nook Simple Touch.

yell! said:
Thank you for your replies!
I prefer the ADB method via USB, I do not like to modify things by touch screen.
I installed ADB, server is running and nook is connected by usb cable, but no devices are found
Google does not help me (or I am failing with keywords) and I do not want to use a wireless connection.
Click to expand...
Click to collapse
Use "ADB konnekt" to connect with your pc via wifi.
If you want to connect via USB you have to turn on "USB DEBUGGING" (manually of using NookColorTools)
and add correct udev rules (http://ubuntuforums.org/showthread.php?t=1918512) on linux.
There are some differences in adding udev rules in different versions of Ubuntu/Debian/Mint. I have no idea on how to do that on Fedora,Gentoo etc.
Don't know how to do that on windows. This info can be found using a search engine x]. Look for ("android device adb setup windows")

[Q] Rooting Nook Classic (Nook First Edition)

I know that this is for second edition but I don't seen a forum for the first edition so this seems to be the closest match. Anyway I am trying to root my Nook Classic (the one with a E-ink display on the top and color touch screen on the bottom). I am following the instructions on nookdevs for rooting the Nook Classic on all hardware and firmware versions (I can't post the link here as I am new but PM me and I can pass it that way if you need). The method is that sometimes when the web browser browses a certain type of website it crashes and sometimes starts adbd and you can connect adb at that point.
I have managed to get adb to connect, pull the init.rc file, make the needed change, but when I try to push the ratc.bin file adb says it goes though but then the second command $ cd /sqlite_stmt_journals (after starting adb shell) says it is not found. So I can't go any further. ratc.bin is what gives root access long enough to push the init.rc back and without being able to run that, well I am up a creek.
Any ideas?

dob43 said:
I know that this is for second edition but I don't seen a forum for the first edition so this seems to be the closest match. Anyway I am trying to root my Nook Classic (the one with a E-ink display on the top and color touch screen on the bottom). I am following the instructions on nookdevs for rooting the Nook Classic on all hardware and firmware versions (I can't post the link here as I am new but PM me and I can pass it that way if you need). The method is that sometimes when the web browser browses a certain type of website it crashes and sometimes starts adbd and you can connect adb at that point.
I have managed to get adb to connect, pull the init.rc file, make the needed change, but when I try to push the ratc.bin file adb says it goes though but then the second command $ cd /sqlite_stmt_journals (after starting adb shell) says it is not found. So I can't go any further. ratc.bin is what gives root access long enough to push the init.rc back and without being able to run that, well I am up a creek.
Any ideas?
Click to expand...
Click to collapse
>> http://www.mobileread.com/forums/forumdisplay.php?f=209
>> http://www.the-ebook.org/forum/viewforum.php?f=44&sid=e250da1c3a4967da22dae8ca2d104ac8

Thanks osowiecki, I did find a thread on Mobile read shortly after I posted this. The other is non-english I am afraid, and sadly I only speak english.
Anyway I did mange to root my nook today. And I am posting here as I hope it will help someone in the future:
Yessssssssssssssss! I finally hacked my Nook Classic (Nook First Edition called by some)! I followed most of the instructions at http://nookdevs.com/Rooting_B&N_revision_1.4_to_1.7_on_any_hardware
I only tweeked in a few places. Here is a general list of what I did:
1. Look at the site above and grab the linked file (ratc.bin). Then go to this thread http://forum.xda-developers.com/showthread.php?t=1474956 and at the top there grab the adb + fasboot + drivers.zip. The reason I used this is because it is much smaller than the full Andriod SDK (which is over 500mb btw) and I figured this would work since it works for Nook Tablets. I didn't install the drivers or anything though. Just used adb.
2. Went with nook browser to http://nookadb.suspended-chord.info/ to crash the browser. If this should ever be down I see on the nookdevs page there is a discussion with the code that is on the crash page so you can put it on any web server and still do this procedure.
3. Once it crashed I went to cmd (comand prompt) and navigated to the folder that had the adb package I downloaded and decompressed earlier. I suggest putting this folder on your desktop for easy use. I gave the command
adb connect yournookip:5555 please note that the nookdevs instructions are not specific in that you NEED the :5555 after the IP. If it doesn't connect, keep crashing the browser by going to that page until it connect.
4. extracted the init.rc file with the command
adb pull /init.rc then edited as per the instructions on nookdevs
5. Now here is where things are different. I tried to push the ratc.bin file and while that seemed to work the commands after it didn't. It would keep saying the file wasn't there. I was cut and pasting the commands direct from the website so I don't think that was the issue. So what I did was grab the bat file at www.mobileread.com/forums/showthread.php?t=121655&page=2 by Jackr and edit it slightly removing the bit about location of adb and placed the bat in the same folder as adb on my desktop and ran it.
6. This actually worked and the bat prompted me to crash the browser again. I kept trying it took a while but as soon as I did it pushed the modifyed init.rc to the nook. The another reason why I think the bat/script is important as my nook totally froze a second after I crashed it. I think that if I was trying to paste that command manually after connecting I would still be trying lol.
7. After reboot I was fully rooted and I installed a bunch of apps from nookdevs using adb. Just make sure the apk (app file) is in the same directory as adb and use the command install nameofapp.apk
8. If you want to use nookmarket app to install files by itself then you need to:
adb connect nookIP:5555
adb shell
then type this after the #
/system/xbin/sqlite3 /data/data/com.android.providers.settings/databases/settings.db "update secure set value=1 where name='install_non_market_apps'"
It will allow nookmarket to install apps on the fly over the net. If you ever want to turn it back off just change the value=1 to value=0 in the above command. Of course you can always use adb, but it can be handy.
Of all the apps I would definitely suggest Nooklibary and wifilocker along with Nooksync. There are several other good nook apps such as trook. Oh I should also mention that Nook Browser still works fine. I think using the batfile/script helped with that situation.
I hope this helps someone who is thinking of taking the plunge (and trying to find out HOW). I wouldn't have bothered if B&N actually continued to update the Nook Classic and add the features that we BEGGED for (and are in NookLibrary). Instead of spending time adding things we didn't like games.

I've tried a thousand times, but always get "failed to copy 'init.rc' to '//init.rc': Permission denied" so RATC must not be working. And I'm on mac, so no bat. Any ideas?

lolbutts said:
I've tried a thousand times, but always get "failed to copy 'init.rc' to '//init.rc': Permission denied" so RATC must not be working. And I'm on mac, so no bat. Any ideas?
Click to expand...
Click to collapse
I would suggest looking at the bat, and creating the equivalent in apple script. If I remember right Mac's still have that option. Another option would be to run say WinXP in emulation (with virtual box for example) and do it that way.

How to root the original Nook tablet (model number: BNRZ100)
dob43 said:
Yessssssssssssssss! I finally hacked my Nook Classic (Nook First Edition called by some)! I followed most of the instructions at http://nookdevs.com/Rooting_B&N_revision_1.4_to_1.7_on_any_hardware
Click to expand...
Click to collapse
Okay, since nookdevs.com has apparently been down for sometime now, I was checking out the mobileread.com link that was shared above and found out the info that I have been searching for to find out how to root the Nook. Be forewarned that I have not tried this yet, but I am about to, and afterwards I will post the results, I am just posting it as sort-of a guide for myself and anyone interested at this point. I will edit this post accordingly once I am successfully rooted.. Please see below for links / details.
Disclaimer: I am not responsible for any damage that is done by you to your Nook, either physically or otherwise. I am just showing you what I have researched and if you choose to follow these directions it is at your own risk.
Which Nook Device Do You Have?
click here to find out:
http://glyde.com/glydecast/how-to/which-nook-do-you-have/
Remember, this is for the first generation only (model number: BNRZ100)
Here is a visual aid that will help you find the SD card that you need to look for once you get the Nook opened up (yes, you will need to open your Nook and access the motherboard):
http://www.wired.com/2009/12/nook-torn-open-hacked-and-rooted/
How to open the Nook up:
https://www.youtube.com/watch?v=GEDqiNiQFHk
Hint: you don't need to take to front panel / bezel off, just the back section because all we need is access to the motherboard to be able to remove the internal SD card, which contains the file that we will be editing.
Finally, the info that you need to root the device (also posted below the link for quick reference, and just in case the link gets broken):
http://www.mobileread.com/forums/showthread.php?t=128210
How to root the Nook, after you figute out how to open it up:
Just you need a microSD Card reader + Linux (any linux ) !
just you should remove the System file MicroSD ( which is inside the Nook )
put it in your PC , change the "init" file with Any txt editor !
just find "service adbd /sbin/adbd" and change the "disable" to "enable" ...
you are done !

Wow I had no idea that Nookdevs went down. Thankfully I did archive all the information on that page. While the method you mentioned is great, and the best, only the earliest nook classic's had removable system SD cards. After the first batch they were soldered chips instead.
With that in mind I am posting what was contained in the link I posted before on NookDevs since it is not available on the internet archive.
------------
This method of rooting is known to work on B&N firmware revisions 1.4-1.7, on all hardware versions. Unlike the other rooting methods, this one involves an element of luck -- it takes advantage of a memory-corrupting bug in the web browser, and its success depends on the current contents of the memory which depends on more variables than we can control. As such, the method requires a little bit of (or more) patience. Warning: After this root is completed, the web browser will be irreversibly damaged.
Contents
1 Preparation
2 Enable adbd on the Nook
3 Pull and modify /init.rc
4 Getting root access
4.1 Keeping root access
5 Your rooted Nook
6 Notes
Preparation
Install Google's Android platform tools from developerdotandroiddotcom. These include many useful utilities, such as the ADB control software.
Open up a terminal to use ADB
Open a command prompt
Navigate to the directory that you installed, then go into the platform-tools subdirectory. This is where the adb executable lives.
Connect your nook to the same WiFi that your computer is on. You need direct (non-firewalled) access to the Nook's IP address to connect via ADB.
Find your Nook's IP address (How to find our your nook's IP address)
Write it down somewhere.
Enable adbd on the Nook
This is the luck portion of the root. adbd is the other half of ADB: ADB runs on your computer, and tries to connect with adbd on the nook. Once connected, you can issue commands, shuffle files, and install applications. Our final goal is to be able to start and stop adbd at will[1].
Open the Nook's web browser and navigate to the web site nookadb.suspended-chord.info. You may want to bookmark the page for a quicker access.
When you load this web page, the browser will crash. (It may automatically reload itself a few times first.) After it crashes, it might enable adbd.
Go back to the command prompt on your computer, and type:
adb connect <nook's IP>
One of two things will happen:
You will get the message unable to connect to <ip address>:5555.
In this case, restart your web browser and load the web page again (from the history or the bookmark). You may have to do this a dozen times or more, so keep at it!
You will get the message connected to <ip address>:5555.
Success!
At this point you have (temporarily) access the nook via ADB, can now enter commands on your PC for the Nook, and can move files back and forth. If you reboot the nook, adbd (the nook companion to ADB) will not be running.
Pull and modify /init.rc
If this isn't your first time through, and you have a modified copy of init.rc, skip this step.
Now that you can connect into the Nook, you will want to pull and edit the /init.rc file. This file is run when the nook turns on, and includes an option to enable adbd (disabled by default). Download the file to your PC with:
adb pull /init.rc
Open this file with Notepad (or a different plain text editor), and find the part the lines:
service adbd /sbin/adbd
disabled
Change 'disabled' to 'enabled' and save the file.
Getting root access
You got the web browser to launch adbd, but you only have the privilege level of the web browser's user - system. To install software and to start adbd when the Nook reboots, you need root access. Rage Against the Cage will give you root access. Next, you'll restart adbd, and push the modified init.rc back to the nook. After that, reboot the nook and you're done!
Download [ratc.zip].
Extract it to the same directory that adb is stored in, then go back to the command prompt:
adb push ratc.bin /sqlite_stmt_journals
adb shell
$ cd /sqlite_stmt_journals
$ /system/bin/chmod 777 ./ratc.bin
$ ./ratc.bin
(several lines of output follow -- don't do anything, a few seconds later adb will disconnect you.)
Keeping root access
If everything went well, you should have root access on the Nook. However, the Nook is now relatively unstable and may stop working at any point, so work quickly!
The nook may crash - just reboot, then restart the process from scratch. (Remember, you don't need to pull init.rc again.)
First, you need to stop your PC's ADB server. It still thinks that it's connected to the nook.
adb kill-server
Second, you need to re-establish the connection with adbd on the nook and then push init.rc file. You can do this by typing these commands[2]:
adb connect <nook IP>
adb push init.rc /
Perform the browser crash procedure again. After each attempt, check if the computer successfully transferred init.rc. If it did, you're done!
If the nook crashes before the transfer completes (so you are not able to connect to your nook), go back to "Enabling adbd on the Nook". You can skip "Pull and modify /init.rc", but do the other steps.
If the adb push gives a permission denied error, redo the "Getting root access", and try again. You may have to do this quite a few times until the whole process succeeds.
Your rooted Nook
Assuming everything worked, you now have a rooted Nook with adbd running on reboot, with root access. You should be able to establish the connection with adbd on the nook without jumping through any other hoops.
What's next? Browse the applications, and install to your heart's content.
Suggestions:
Mynook.ru Launcher A polished replacement launcher. You must replace the launcher to access additional applications with the nook.
Trook A RSS feed reader for the nook, and much more! It can install applications, too. Just go into the nookdevs feed.
NookLibrary A replacement library for the nook. If unifies sideloaded books with Barnes & Noble content, and offers other improvements.
NookMarket A program that allows you to easily install everything on nookdevs. Trook offers more functionality (imho)
Games There are a few games on the applications page.
Notes
↑ There's also a Python script to automate the process: root-nook-eink.tar.xz (Updated Jun 6 , 2011)
↑ You may want to run a script that automatically issues the following commands, reducing the chances of the nook crashing before init.rc has been pushed to it. In this case, extract this [batch file] to the same directory as ADB. Run it by typing:
push.bat
It will prompt you for your nook's IP address, then try connecting. Every few seconds, ADB will complain that it can't connect to the nook. Let's fix that.
------------------------------------------------
The above is from Nookdevs.com and I did not write it I am only posting it here as the site has went down.
I am also posting the html file that is needed to do this (although here it is in txt format). If the the site listed above ever dies you can put this on a website somewhere to use it. And the ratc.bin file needed.
And finally I am adding the apps that make rooting the nook classic worth while. The improved library definitely. Which btw are two parts, the library app and the nooksync which enables you to download from B&N directly. Otherwise you need to use the normal nook library app to download then you can read with the nookdev version. I am not sure which version of the library works best, been a while since I installed it so I included both.
Also wifilocker is great to turn wifi on/off not to mention lock it and keep the nook from going to sleep while you are connected to adb. I definitely suggest installing that as well. The others are handy. Trook can connect to calibre and download books from your desktop. The nook browser is a improved web browser for nook classic, although I never really bothered with it.
Nook notes is good for quick little notes when you don't have any other device handy. Txt reader reads txt files, not the best but it is handy. Personally I just make epubs of anything with calibre. But if you don't want to bother making a epub first, this is handy.
Hope this helps someone!

I downloaded files and rat.bin has malware in it.
I also have hard time understanding the ones that are explained above. Is there any easier way to do it? Does anybody have a good tutorial video or "fool-proof" instruction on this? I have Nook classic wifi version.
I would like to read kindle books on nook as well as the nook books. Is this even possible on this model?
Thanks for the help

kidollt said:
I downloaded files and rat.bin has malware in it.
I also have hard time understanding the ones that are explained above. Is there any easier way to do it? Does anybody have a good tutorial video or "fool-proof" instruction on this? I have Nook classic wifi version.
I would like to read kindle books on nook as well as the nook books. Is this even possible on this model?
Thanks for the help
Click to expand...
Click to collapse
Er of course rat.bin would be flagged as malware, because technically it is. You are hacking a system that is designed not to let you in. But in this case all rat.bin will do is let you in so you can get root of your own device, nothing else. No back doors for anyone else or making your device do odd things.
The problem you are having is not using rat.bin, without that you might as well not try. I also only managed to do it with a BAT file so that it would keep trying to push the init.rc RIGHT AFTER the rat.bin was used. Generally you can't type fast enough to do the push. The window of opportunity is very very small.
This does work but is tricky as the window of opportunity is very small. I tried for hours trying to get it to work, then I used the BAT file to make the push automatic and on the second try it worked. Rooting the Nook Classic is the toughest device to root that B&N made. If you have one of the really early models that has a removable internal SD card then you can pull that, made modifications (install a old version of the ROM, make a modification to init.rc), and reinstall the SD card. I forget the serial numbers of the models that this worked with, but I do know it was the first batch of Nooks B&N made. If you got yours after the first Christmas, then it is likely it doesn't have a internal SD card that you can remove. Later on they soldered them to the board.
As for reading kindle books, no. There isn't a mobi reading app that I have found, let alone kindle books with DRM. The better bet is to use Calibre calibre-ebook.com to convert your kindle books to epub. But they can't be encrypted/DRM. If they are, then you have to remove that. There are scripts for Calibre that can do it for nook and kindle. I use calibre to convert my mobi/kindle books to epub then side load them. Another benefit of rooting a nook classic, you can then browse and download wireless from your calibre library with the took app. Although I never bothered and just did the transfers via USB.

Hi!
I would like to ask for help in this case:
I followed all the instructions here, however for some reasons I wanted to install this app first using the command "adb push Home.apk /system/app" pushing the app found here: Github
Now it turns on/off, shows "Home", batter and time at the top bar, but everything else is black both the Eink screen and the touchscreen as well.
It does not connect to wifi automatically so I can't connect via ADB to switch back to the original Home apk
Please help me, what should I do?

Is 1.7 software not rootable?
I can't get adb to come on, no matter how many browser crashes I do. Even wrote a script for it:
@echo off & setlocal
set IP=192.168.0.119
set loopcount=0
set s
:loop
set /a loopcount=loopcount+1
echo Connecting %loopcount% time...
adb connect %IP% | find /i "connected to" > %s
if errorlevel 1 (
echo Not successful + %ERRORLEVEL% + %s%
goto loop
) else (
echo Successful + %ERRORLEVEL% + %s%
adb shell
goto exitloop
)
:exitloop
pause
Click to expand...
Click to collapse
Is OTA rooting (by redirect on sync.barnesandnoble.com) not possible any longer as well?

Sorry for the late response, for some reason the email telling me there was a post here just arrived TODAY lol.
It should be, I did it with 1.7. The script I have I modded a little from another one I found online here is mine:
Code:
@echo off
echo The website hack seems to work on the round right after it has an instant crash.
echo.
adb kill-server
adb start-server
set /p ip=Enter the IP here.
:CON
cls
echo Crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto INT
echo.
goto CON
:INT
if exist ratc.bin (set f1=1) else (set f1=0)
if exist init.rc (set f2=1) else (set f2=0)
if %f1%==%f2% (if %f1%==1 (goto RTT) else (goto 2fi)) else (goto 2fi)
:2fi
if %f1%==0 (echo "The ratc.bin file is not in the %cd% directory.") else (echo Ratc.bin file present.)
echo.
if %f2%==0 (echo "The init.rc file has not been pulled from the device to the %cd% directory, pulling now.") else (echo Init.rc file present.)
if %f2%==0 adb pull /init.rc
echo.
echo Please add the required files and restart this batch. If init.rc was just pulled, you will need to modify the file.
cmd
:RTT
adb push ratc.bin /sqlite_stmt_journals
adb shell cd /sqlite_stmt_journals
adb shell /system/bin/chmod 0777 /sqlite_stmt_journals/ratc.bin
adb shell /sqlite_stmt_journals/ratc.bin
adb kill-server
adb start-server
goto CO2
:CO2
cls
echo Re-crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto PSH
echo.
goto CO2
:PSH
adb push init.rc /
adb shell reboot
echo.
echo Congrats! The device is now rooted.
echo.
cmd
It is RANDOM on the browser crashes. Sometimes it happens fast, another time it look me a hour or two to get a good crash and root the nook. Also if it doesn't seem to be doing it for a long time, try rebooting the nook (hold down the power until the screen blanks then press the button again to restart it). In my opinion, this is the toughest Nook to root, but definitely worth it. Especially now that B&N ended support some time ago. Also make sure the ADB, this script, and the ratc.bin is in the same folder. I used a folder on the desktop as it made it much easier/faster to get to. Also after you get the init.rc and modded, that should be in the same folder as well.
As for OTA rooting, I have no idea if it will work or not. I never used that method. But if it depended on any sort of connection from B&N, I doubt it will work now since they have abandoned the Nook classic.
If you need any of the nook apps that were on the nook developer site let me know. I downloaded all the apps before the site went down.

dob43 said:
Sorry for the late response, for some reason the email telling me there was a post here just arrived TODAY lol.
It should be, I did it with 1.7. The script I have I modded a little from another one I found online here is mine:
Code:
@echo off
echo The website hack seems to work on the round right after it has an instant crash.
echo.
adb kill-server
adb start-server
set /p ip=Enter the IP here.
:CON
cls
echo Crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto INT
echo.
goto CON
:INT
if exist ratc.bin (set f1=1) else (set f1=0)
if exist init.rc (set f2=1) else (set f2=0)
if %f1%==%f2% (if %f1%==1 (goto RTT) else (goto 2fi)) else (goto 2fi)
:2fi
if %f1%==0 (echo "The ratc.bin file is not in the %cd% directory.") else (echo Ratc.bin file present.)
echo.
if %f2%==0 (echo "The init.rc file has not been pulled from the device to the %cd% directory, pulling now.") else (echo Init.rc file present.)
if %f2%==0 adb pull /init.rc
echo.
echo Please add the required files and restart this batch. If init.rc was just pulled, you will need to modify the file.
cmd
:RTT
adb push ratc.bin /sqlite_stmt_journals
adb shell cd /sqlite_stmt_journals
adb shell /system/bin/chmod 0777 /sqlite_stmt_journals/ratc.bin
adb shell /sqlite_stmt_journals/ratc.bin
adb kill-server
adb start-server
goto CO2
:CO2
cls
echo Re-crash the browser.
echo.
adb connect %ip%
for /f "tokens=2" %%A in ('adb devices') Do (Set dev=%%A)
if %dev%==device goto PSH
echo.
goto CO2
:PSH
adb push init.rc /
adb shell reboot
echo.
echo Congrats! The device is now rooted.
echo.
cmd
It is RANDOM on the browser crashes. Sometimes it happens fast, another time it look me a hour or two to get a good crash and root the nook. Also if it doesn't seem to be doing it for a long time, try rebooting the nook (hold down the power until the screen blanks then press the button again to restart it). In my opinion, this is the toughest Nook to root, but definitely worth it. Especially now that B&N ended support some time ago. Also make sure the ADB, this script, and the ratc.bin is in the same folder. I used a folder on the desktop as it made it much easier/faster to get to. Also after you get the init.rc and modded, that should be in the same folder as well.
As for OTA rooting, I have no idea if it will work or not. I never used that method. But if it depended on any sort of connection from B&N, I doubt it will work now since they have abandoned the Nook classic.
If you need any of the nook apps that were on the nook developer site let me know. I downloaded all the apps before the site went down.
Click to expand...
Click to collapse
Does this still work? I recently dug up my old nook 1st edition, I tried the website and it didn't crash my browser, it just sat there forever loading.. I looked at the site, now it's using TLS 1.3, but old nook 1st edition is stuck with TLS 1.2... I tried for many hours just couldn't "crash" the web browser at all...

How to Root and set up a new Nook Glowlight 3

I got tired of having to jump between a bunch of threads when setting up my Glowlight 3. So I'm consolidating directions into one post in the hopes that it'll save others time and trouble. Credit for instructions should go to the people who actually wrote them: arnchav of mobileread; RyogoNA, Silent eInk, cazar and Renate NST here on xda; and everyone who figured out the root exploit, sideloading, the devs behind Relaunch, RelaunchX and F-Droid. Material lifted from their original posts (linked at the bottom).
Now, this is going to walk you through doing a few things:
A) Setting up a progam called ADB on your computer so that it can talk to your NG3
B) Adding a "Launcher" app to your nook so that you can access other apps you sideload later
C) Root theNook so that you can do more stuff with the settings, including the ability to...
D) Fix a bug that, after installing a launcher, causes the NG3 to get stuck on the loading screen after rebooting
Before you start, you need to set up ADB on your computer. Follow the instructions linked here. The rest of this post will assume you're using Windows, but won't be hugely different from other OSs.
Here we go:
To set up ADB on your nook:
1. On your Nook, go to Settings>About. You should see the serial number, app version, etc. At the top of that page, there is a nook icon. Tap that icon rapidly until the developer menu opens.
2. Tap "Android Development Settings" and check the box for "USB debugging".
3. At the Developer options screen you are on (where you checked the box), hit the back arrow at the top-left of the screen to go back. But do not exit the developer menu.
4. On your computer, open a command prompt and navigate to the folder where you put adb (in my case I typed in "cd adb/platform-tools")
5. Plug the USB in to the nook. When the nook prompts you to turn on USB mode, do so. At the adb command prompt, type adb devices. ADB should recognize the nook, but say that it is unauthorized.
6. From windows, eject the nook to disconnect nook's file sharing. Once the nook's USB file sharing screen goes away, you should be able to see the developer menu again. Tap "Allow Debugging" one time! There will be no confirmation, just do it one time.
6. Unplug the USB, plug it back in, turn on USB mode when prompted. Back in the command prompt, type adb devices again. This time it should see the device and simply say "device" where it used to say "unauthorized". Congratulations! You can now install a launcher.
To install a launcher, like RelaunchX
1. Download your launcher apk of choice. If you don't know what to pick, try RelaunchX, and download the latest version from plusz's thread here: https://www.mobileread.com/forums/showthread.php?t=284418 (n.b. To make things easy, ignore his suggestion to get it through F-Droid as you'll need a new launcher to use F-Droid in the first place. Just download the apk).
2. In Command prompt, type adb install <filelocation>, where filelocation is the complete address of the apk. If you have file explorer open, you can just type adb install then a space, then drag the file in to the terminal and it will copy the location for you. (Make sure again that there is a space between "install" and the path or it won't work).
3. ADB should do it's thing and you will get a "success" message in Terminal.
4. Eject the nook from the PC. Shortly after the connection is cut, a window should open on the nook allowing you to select either the nook launcher or your new launcher. If you use RelaunchX, you may get a warning that it wasn't built with this device in mind. You can ignore it, it works great on this device.
This is all great, except there's a bug in how B&N set up the device that only shows up if you install a new launcher. If you reboot the device, you'll be stuck on the boot animation until you do weird things like hold down the power button for a long time to pull up the reboot/power off options (only seems to sometimes work). To fix that, we actually have to disable, remove, or replace the boot animation file itself.
To root:
1. Download the modified Glowlight Plus script attached here ("rootGL3.zip" - almost identical to cazar's rooGLP-3 script package, but with one line changing the model number from 510 to 520)
1. Enable USB debugging in Developer options
2. Connect USB cable and make sure your nook is showing up in 'adb devices'
3. Extract rootGLP.zip and run rootnook.cmd (or rootnook.sh on linux)
To fix (read: disable) the buggy boot animation:
1. Connect your nook to the computer again
2. (windows) open a command prompt and and navigate to the folder that adb is in.
3. Enter the following commands, in order:
Code:
adb shell
su
mount -o remount, rw /system
mv /system/bin/bootanimation /system/bin/bootanimation.bak
reboot
OPTIONAL: To restore a working boot animation (steps above will replace broken boot animation with a black screen that goes away after a few seconds)
1. Download the attached zip
2. If it's not still connected, connect the Nook to the computer again and tap the button on the nook to turn on USB mode when prompted,
3. On your computer, open up the Nook in Explorer(/Finder/your file manager of choice). Open up the NOOK Folder if you see one.
4. Copy the file inside the zip (bootanimation) to that folder on the Nook.
5. Eject the nook (as in, in windows, click the option to safely remove it as a device) but keep it physically connected
6. Open a command prompt(/terminal/whatever you use for adb) and navigate to the folder that adb is in.
7. Enter the following commands:
Code:
adb shell
su
mount -o rw,remount -t ext4 /dev/block/mmcblk0p5 /system
cp /storage/spsd/NOOK/bootanimation /system/bin/bootanimation
cd /system/bin
chmod 755 bootanimation
reboot
You now have a rooted Nook Glowlight 3 that'll boot into a launcher of your choice! You can now sideload apks of your choice using adb the same way you installed RelaunchX.
Have fun!
Sources for these instructions:
https://www.mobileread.com/forums/showpost.php?p=3632665&postcount=118 (how to sideload onto nook 3)
https://forum.xda-developers.com/showpost.php?p=75717722&postcount=113 (same as above, diff user)
https://www.mobileread.com/forums/showthread.php?p=3632665#post3632665 (to get RelaunchX)
https://forum.xda-developers.com/showpost.php?p=64191791 (for nook GLP rooting script)
https://forum.xda-developers.com/showpost.php?p=76042888&postcount=127 (to fix boot animation loop)
HELP! I DID THIS A LONG TIME AGO AND NOW MY NOOK GLOWLIGHT 3 IS STUCK ON THE LOADING SCREEN!
Don't worry, this is fixable. What's happened is that Barnes and Noble pushed out a system update that undid almost everything except that part that breaks the boot animation thing (specifically it overwrites the directory with everything that gives you root access and a working boot animation, but left your custom launcher in place).
All you have to do is re-do most of the steps above. Start from the "to root" step - even if the device is stuck on a boot animation, you should still be able to use adb. After redoing the steps, your GL3 should work normally again.
Unfortunately it looks like this is going to happen every time B&N pushes a system update, but that's not that often.

If someone knows a step-by-step way to replace the stock bootanimation with the 4.6 bootanimation file (zipped up and attached here, thanks to RyogoNA), let me know and I'll update the OP. I tried used adb shell to copy it to /system/bin/bootanimation, but I still just get a black screen on startup in its place.

jptiger said:
I still just get a black screen...
Click to expand...
Click to collapse
Mmm, did the copy of bootanimation work?
Did you:
Code:
/system/bin # chmod 755 bootanimation

Tried that, but I got an error about a Read-only file system, even after using su. What's the basic thing I'm missing?

jptiger said:
Tried that, but I got an error about a Read-only file system, even after using su. What's the basic thing I'm missing?
Click to expand...
Click to collapse
Got a private message pointing me to the command I was missing, apparently from a how-to page in Russian. For anyone else trying to do this, try:
Code:
mount -o rw,remount -t ext4 /dev/block/mmcblk0p5 /system
cd /system/bin
chmod 755 bootanimation

Can't get adb devices to give autorhized access to ng3 w 4.9.2.24 os
First off thank you for doing this work, and I am excited to root my ng3!
In trying to follow your directions on rooting, I am hitting a snag. The os is not operating in the anticipated manner. When I do the usb unplug and replug and hit the usb debugging checkbox I can not get authorization.
Please help!
Thanks in advance!

Trouble with root
Hi,
Thanks for putting this all together. However, I'm having trouble with the root step.
You'll have to put the link together because as a new poster I can't post links.
Any help would be appreciated!
imgur . com
/a
/ckm0jRq

xelcho said:
First off thank you for doing this work, and I am excited to root my ng3!
In trying to follow your directions on rooting, I am hitting a snag. The os is not operating in the anticipated manner. When I do the usb unplug and replug and hit the usb debugging checkbox I can not get authorization.
Please help!
Thanks in advance!
Click to expand...
Click to collapse
Hmm. Did you get authorization after following the directions under "To Set up ADB on your Nook"?
L3R0k2b2 said:
Hi,
Thanks for putting this all together. However, I'm having trouble with the root step.
You'll have to put the link together because as a new poster I can't post links.
Any help would be appreciated!
imgur . com
/a
/ckm0jRq
Click to expand...
Click to collapse
Ooh, that's exotic. I've never seen that before. Just going off the error text, you might need to find a newer version of adb somewhere online. Try that or try a different computer?

Adb is super stable for many years now, although it can fail to connect to your device properly for many reasons.
Can you reach developer menu navigating with nooks keys? I sometimes enable /disable /enable usb Debug, followed or preceded by revoking all PC's permissions. These are all standard options in android phones s system. menus. Rebooting nook may help too, and numerous times I've seen bad cables get in my way. Tip, just because a cable works with one device is not a guarantee it's working everywhere.

RE: STEP 6. "From windows, eject the nook to disconnect nook's file sharing."
Note:
1. The location of the eject menu is where you typically see "Safely remove hardware and eject media" in the windows taskbar.
2. After attempting to eject your Nook GLP, you may get a window that pops up that says "Windows can't stop [your device]" because a process is using it -- and you may not be able to track down which process is using it (for me, closing all windows and apps didn't help). If this is the case, hit "WINDOWS+X >> Shut down or Sign Out >> Sign out" -- then log back in. This *should* stop all processes and allow you to proceed to the next step (it did for me).
*My Nook GLP recently updated and I lost root. This also caused the startup animation to continue non-stop (but holding the power button and then selecting cancel from the options allowed me to select which launcher I wanted to use).
** Additionally, I had one other issue. My (windows) laptop wouldn't recognize my nook at all. Turns out it was the USB cable. So if you have that issue, try using a different USB cable -- preferably the one that came with your nook.

Missing epubs
So I followed the instructions, everything comes up great. I can sideload apps, I have a new launcher etc. But if I copy a file (epub or otherwise) into the NOOK folder on my PC and then browse to the NOOK folder using the file manager on the Nook reader, its empty. At first I thought it was an issue with the file manager, so I installed another one. Same thing.
When I load epubs into the NOOK folder and open the B&N launcher, it sees the books and adds them to my library. But for whatever reason I can not find where the epubs are using a file manager. I even tried using grep to search for the file I copied in adb shell but it doesn't come up with anything. Anyone know whats going on and how to fix it?

Never mind its under /storage/spsd/

mount: Operation not permitted
I get this error after typing in the mount -o ... command.
Any help apprecidated!

root file missing
Hey, @jptiger In the setup instructions the rootgl3.zip file is missing a link now... Does anyone have an active link to this file, or another working root process? I couldnt find one by searching online..

Misssing files
I rebooted my nook recently and it comes back up but when I got /storage/spsd/ its empty. When I attach my nook to my pc, I can see all my books. So I did the following:
Code:
adb shell
su
busybox find / -name "*.epub"
The only files that it shows are the sample epubs that come with the Nook. I am kind of stumped as to how the files show up when I browse the nook as a usb drive. But will not show up when browsing for them via the nook itself or adb. Any thoughts?

Heretic09 said:
I rebooted my nook recently and it comes back up but when I got /storage/spsd/ its empty. When I attach my nook to my pc, I can see all my books. So I did the following:
Code:
adb shell
su
busybox find / -name "*.epub"
The only files that it shows are the sample epubs that come with the Nook. I am kind of stumped as to how the files show up when I browse the nook as a usb drive. But will not show up when browsing for them via the nook itself or adb. Any thoughts?
Click to expand...
Click to collapse
It looks like the flash memory on the Nook maybe going bad. There was a bunch of .chk files in the hidden LOST folder. Reformatting it and copying the books back to the nook seems to have fixed the problem for now. I may have to invest in the Kobo Clara HD in the future.

andjosgra said:
Hey, @jptiger In the setup instructions the rootgl3.zip file is missing a link now... Does anyone have an active link to this file, or another working root process? I couldnt find one by searching online..
Click to expand...
Click to collapse
That's weird. I don't know why they took down the original attachment. I can't find it, but I've gotten the on from the NGP+ and modified it the way they did with the originals. It's attached to this post, give it a shot.
EDIT: I uploaded the version attached here to the OP, but with the original name. The two zips have the same contents.

Heretic09 said:
So I followed the instructions, everything comes up great. I can sideload apps, I have a new launcher etc. But if I copy a file (epub or otherwise) into the NOOK folder on my PC and then browse to the NOOK folder using the file manager on the Nook reader, its empty. At first I thought it was an issue with the file manager, so I installed another one. Same thing.
When I load epubs into the NOOK folder and open the B&N launcher, it sees the books and adds them to my library. But for whatever reason I can not find where the epubs are using a file manager. I even tried using grep to search for the file I copied in adb shell but it doesn't come up with anything. Anyone know whats going on and how to fix it?
Click to expand...
Click to collapse
adb can't access NOOK storage when it's still connected to PC. Eject the device under BNRV520 (should say "NOOK: (F" or similar), but do not disconnect. Then you can find files in both adb and later NOOK's file manager when you disconnect. (should be under /storage/spsd/)
Guide is great though. Thank you all so much! Fast and easy! (unlike making a B&N account)
btw, I had to run "adb shell su" instead of 'adb shell' -> 'su' to get su priviledge, so maybe try that.

what is the adb command to manually launch relaunchx? the launcher option stopped working, and i can't get it to run at all.

Happy to report that the excellent instructions work great on the new 7.8" Glowlight Plus that got released yesterday. Change the model number to BNRV700 in the rootnook.cmd file and you're good to go!