Database Users

[Q] Restore Defy+

Hi everyone
I made a mistake by installing CM7 to defy (mb525) on my defy + (mb526)
With this rom my motorola is a recognized defy (mb525) in the settings, it still uses all its capacity? What is changing?
How to submit an original rom defy + (mb526)?
I can then put the right to defy CM7 + (mb526)?
It is not unlocked, locked SFR (France), and I have not seen sfb SFR it does not matter to put one another?
Sorry for my English ... it is the automatic translator
thank you very much

Up please help me

What Cyanogen build did you use?
I suggest this version, it hasn't got any bugs:
http://forum.xda-developers.com/showthread.php?t=1445259
It shows MB526(I think it's written in the bluid.prop)

Use the ROM sugested by Mister-Samossa or the last nighty whith those patchs.
I'm using the cm72-120127.0846-NIGHTLY-Defy+ with the patchs and it works very well: no FCs, camera works properly, battery life is good (2-3 days), charged until 100% and no gaps when discharging.

i'am in test this rom,but patch whit install ?? thank for reply !!

Do you need a new SBF to flash these, or can I just go from stock 2.3.5?
edit: I can just go from stock, it only requires a GB kernel, which my stock has.

evalabonazza said:
i'am in test this rom,but patch whit install ?? thank for reply !!
Click to expand...
Click to collapse
You must install the patchs from [] AL [] using recovery->Install zip if you want a working camera and that battery can charge to 100%
otaku888 said:
Do you need a new SBF to flash these, or can I just go from stock 2.3.5?
edit: I can just go from stock, it only requires a GB kernel, which my stock has.
Click to expand...
Click to collapse
You don´t need to flash any other SBF. I installed it over the stock 2.3.5 rooted.

elTorres said:
You don´t need to flash any other SBF. I installed it over the stock 2.3.5 rooted.
Click to expand...
Click to collapse
Thanks, running it now, and very happy with it.

[Q] want to shift from cm7.1 to miui

hi frns
m havin defy green lens
cm7.1 stable
i want to jump to miui
wat version is most stable?
can i directly put it over cm,without flashing anything els??
thanks in advance

bds bamrah said:
hi frns
m havin defy green lens
cm7.1 stable
i want to jump to miui
wat version is most stable?
can i directly put it over cm,without flashing anything els??
thanks in advance
Click to expand...
Click to collapse
Best MIUI ROM for defy: MIUI Pikachu edition!
If you have froyo cm7 (sounds like it because you have green lense defy) you can just do the normal wipes (data, cache, dalvik) and flash. If you flash Pikachu edition, data will be wiped automaticaly

http://forum.xda-developers.com/showthread.php?t=1161110
try wiui 2.3.16 stable..its pretty fast and based on miui..
but i like cm7 the speed is incomparable...and plays 720p videos like a Ferrari lol

MIUI 2.3.16 :FTW:
very stable - plenty fast & usually updated every week ^^

MIUI are beautiful，but I didn't like it
MIUI are beautiful，but I didn't like it

thanx guys..
i just want to confirm dat if i flash miui on green lens,that is froyo kernel,will there be any problems?
can i come back to cm7 any time??

bds bamrah said:
thanx guys..
i just want to confirm dat if i flash miui on green lens,that is froyo kernel,will there be any problems?
can i come back to cm7 any time??
Click to expand...
Click to collapse
Sure. Make a Back-Up in CWM (Recovery). It's easy to recover your system there without re-installing apps/contacts or stuff like that. Just Go in CWM --> Backup & Restore -->Backup (all).
If u want to restore Later: same way. CWM --Y Backup and restore --> Restore (system & data).
greetz

Thanx buddy...
I was jus afraid as I read somewhere dat u can't switch back to cm after flashing miui...
Can u plz send me the link to latest version of miui??
hboy1337 said:
Sure. Make a Back-Up in CWM (Recovery). It's easy to recover your system there without re-installing apps/contacts or stuff like that. Just Go in CWM --> Backup & Restore -->Backup (all).
If u want to restore Later: same way. CWM --Y Backup and restore --> Restore (system & data).
greetz
Click to expand...
Click to collapse
[email protected]

bds bamrah said:
Thanx buddy...
I was jus afraid as I read somewhere dat u can't switch back to cm after flashing miui...
Can u plz send me the link to latest version of miui??
[email protected]
Click to expand...
Click to collapse
Well, it's just your descision. I like the MIUI Pikachu Edition! But in the past months they developed so many other MIUI Roms - i didn't try others. It's your choice! I think they're all good.
Take the Blue or the Red Pill
Pikachu Edition 2.3.2 *AROMA INSTALLER*
WIUI 2.3.16
MIUIandroid Defy 1.8.5

Thanks pal...
Will try dem..
[email protected]

hboy1337 said:
Well, it's just your descision. I like the MIUI Pikachu Edition! But in the past months they developed so many other MIUI Roms - i didn't try others. It's your choice! I think they're all good.
Take the Blue or the Red Pill
Pikachu Edition 2.3.2 *AROMA INSTALLER*
WIUI 2.3.16
MIUIandroid Defy 1.8.5
Click to expand...
Click to collapse
Which one out of three is most stable?
Sent from my MB525 using XDA

Defy+ 2.3.6 CM7

Hello,
I created my own CyanogenMod 7 ROM for a Motorola Defy+
Now I have a new Defy+ with 2.3.6 I would install my ROM but its not possible.
Can anyone explain me how I create a CM7 ROM for the 2.3.6 Defy?
regrads
Nico-X

Nico-X said:
Hello,
I created my own CyanogenMod 7 ROM for a Motorola Defy+
Now I have a new Defy+ with 2.3.6 I would install my ROM but its not possible.
Can anyone explain me how I create a CM7 ROM for the 2.3.6 Defy?
regrads
Nico-X
Click to expand...
Click to collapse
Sorry dint quite get you. What exactly do you mean by not possible?! You are not able to install or is it that you are getting some errors? Hope you already know about snd init and the process...

pranks1989 said:
Sorry dint quite get you. What exactly do you mean by not possible?! You are not able to install or is it that you are getting some errors? Hope you already know about snd init and the process...
Click to expand...
Click to collapse
Sorry for the bad description.
I can root my Phone and install my CM7 ROM with the Recovery.
If I boot the Phone normal it hangs at the Red Motorla Logo.
After install the Defy+ Nightly Build the phone boots complitly fine.
Actually I would like to use the nightly source to build a new ROM.
Is it possible to download this source code?
regards
Nico-X

Defy+ Stock SBF on Defy

Hi, my question is: it's posible to install a Defy+ Stock ROM (SBF) on normal Defy (MB525)? Somebody has probed?
If the answer is Yes, what's the benefit?
Thanks!!!

never flash Defy + SBF on defy.
ur battery and camera not worked

aldaenva said:
Hi, my question is: it's posible to install a Defy+ Stock ROM (SBF) on normal Defy (MB525)? Somebody has probed?
If the answer is Yes, what's the benefit?
Thanks!!!
Click to expand...
Click to collapse
yes it is posibile
BUT JUST AFTER YOU MAKE SOME MODIFICATIONS IN IT
NEVER FLASH A FULL DEFY+ SBF ON DEFY(special on green lense)
if you dont know what is need to modified
DONT TRY!!!!

Thanks, question answered.

[Q] How to flash Quarks Custom Kernels

Dear All,
Greetings !!!!!
I have green lense defy in which i had accidently flashed defy plus rom. now my defy is on sbf of defy plus as it is non down (BL7)
For almost 1 month My camera was dead but after flashing quarks 2nd boot rom ( which includes custom kernels) my camera starts working.
Now if i flash other roms for eq. rapidroid / miui / wajkUI then kernels changes ( it shows kernel name like hudson ) & again my camera wont work.
Should I flash custom kernel of quarks on the above mentioned roms?? Will Camera work ???
Please guide me ...Thanks in Advnce...

Latest Qarx ROM's have kernel embedded so you do not need to flash nothing more but gapps. Do cash and dalvic wipe and flash newest 18/10 ROM then gapps.
The ROM is unified and suits any kind of Defy
Sent from my MB526 using xda premium

Dear Friend But Camera wont work if I flash other rom !!
trurl3 said:
Latest Qarx ROM's have kernel embedded so you do not need to flash nothing more but gapps. Do cash and dalvic wipe and flash newest 18/10 ROM then gapps.
The ROM is unified and suits any kind of Defy
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Dear Friend Thanks for reply.. But If I flash other roms like rapidroid or any other then kernels changed and my camera becomes dead again!! Hence what i want to do is flash other rom and then flash quarks custom kernel to start my camera as well!!
Please reply.....:good:

avi_tandel said:
Dear Friend Thanks for reply.. But If I flash other roms like rapidroid or any other then kernels changed and my camera becomes dead again!! Hence what i want to do is flash other rom and then flash quarks custom kernel to start my camera as well!!
Please reply.....:good:
Click to expand...
Click to collapse
Oops! Quarx kernel is for JB, which contains jb ramdisk internally. It won't boot for other than jb builds. You can install any jb rom, like, aokp, cna, slimbean all work with Quarx kernel, but not with any other cm9 and less builds.

Please Specify in details...
premaca said:
Oops! Quarx kernel is for JB, which contains jb ramdisk internally. It won't boot for other than jb builds. You can install any jb rom, like, aokp, cna, slimbean all work with Quarx kernel, but not with any other cm9 and less builds.
Click to expand...
Click to collapse
U want to say that these roms aokp , cna , slimbean are based on quarks custom kernel?? or after flashing these roms do I need to flash quarks custom kernel??

avi_tandel said:
U want to say that these roms aokp , cna , slimbean are based on quarks custom kernel?? or after flashing these roms do I need to flash quarks custom kernel??
Click to expand...
Click to collapse
No. These ROMs have the kernel embedded in them. You just need to Flash the zip file through recovery.

premaca said:
Oops! Quarx kernel is for JB, which contains jb ramdisk internally. It won't boot for other than jb builds. You can install any jb rom, like, aokp, cna, slimbean all work with Quarx kernel, but not with any other cm9 and less builds.
Click to expand...
Click to collapse
Premaca,
Does this mean that there is no way to downgrade to other roms like MIUI (gingerbread based) or the stock defy Froyo rom using a nandroid backup?

At present there is no way to do so...
@southpaw said:
Premaca,
Does this mean that there is no way to downgrade to other roms like MIUI (gingerbread based) or the stock defy Froyo rom using a nandroid backup?
Click to expand...
Click to collapse
At present there is no way to downgrade!!!!! If u try then 100% u will get boot loader error..But we can hope in future devs will be able to downgrade bl7. :laugh:

@southpaw said:
Premaca,
Does this mean that there is no way to downgrade to other roms like MIUI (gingerbread based) or the stock defy Froyo rom using a nandroid backup?
Click to expand...
Click to collapse
You can go back from the custom kernel to your stock rom. The custom kernel doesn't change your bootloader version. So no need to worry.

Your Reply Will Help Thousands of DEFY Users
UEman said:
You can go back from the custom kernel to your stock rom. The custom kernel doesn't change your bootloader version. So no need to worry.
Click to expand...
Click to collapse
Dear Uman, Ur reply will definately help thousands of defy user (mb525 ) who have accidently flashed full sbf of defy plus (mb 526) and who are on BL 7. Before quarks custom kernels i.e. second boot roms camera of all those defy users was dead. Only after flashing quarks second boot rom camera becomes on!!! But I have gone through full XDA Forum & according to my RnD, at present there is no way to downgrade BL7. For ur information I had tried 2.2 nandroid backup but it was giving me bootloader error, further more I had switched to other GB Roms but then kernels changes and phone was working fine without camera.. Kindly confirm ur reply so that I will once again try to do so......:good: