[Q] ICS ROM questions... - Acer Iconia A500

Hey guys, Im going to try and explain my situation as best I can. Im not a newb to rooting, etc, but I am no means an expert like most of you. So, with that said, here I go...
I had my Acer A500 rooted on honeycomb when I first bought, when it first came out. I then tried to do the OTA update of ICS many months back with no luck as it gave me the Triangle of death thing when it tried to install it. However it broke my root anyways even though ICS never installed. The weird thing though is that I finally realized my build version stated I was on ICS, but my Android version showed I was running 3.2.1 honeycomb!!!
Yesterday, I finally got fed up and spent hours searching this forum and others trying to find a solution.
On this page (http://forum.xda-developers.com/showthread.php?t=1816560), I tried flashing many of the full ROM's and update package ROM's and finally found one that worked under the update package...this one specifically (Acer_A500_7.014.16_041.206.01_COM_GEN1: ftp://94.23.233.147/Tablets/A500/Ace...1_COM_GEN1.zip). My tab booted and seems to be working fine and running 4.0.3 now.
So with all this said, my question to you Android Exerts...what the heck happened? How was I running an ICS build, but on honeycomb? Even though I flashed an update package, do I have a full ICS or do I need to flash a full ROM now?
If I need to flash a full ROM, which one should I do from the first link above?
I am also attaching a screenshot of my Acer tab to show you what Im running.
Please help and thank you to all in advance.

Anyone? I would really appreciate some help/feedback from you genius android guys.

Well, from the looks of things you are now on stock ICS....
To flash a rom ics/jb from here, u need to nvflash the unlocked boot loader package, which will include a custom recovery...
Most custom roms are pre-rooted so u won't need to worry about that...
Head over to civatos boot loader thread for a guide and d/l links
It can be a rather complex process but if u follow the guide to the letter, u shouldn't have any probs...
Go thru steps 1-4 first and then carry on to the actual flashing process.
There are auto-tools u can use...apxFlash Tool or afterOTA but I prefer the good old manual nvFlash method,
You will need drivers and your cpuid - see the guide in my sig if u need further info
Be aware that if u muck this up, u may end up bricked and lately there's been a lot of this....worst case scenario-fried m/board!!
Most folk flash with no troubles at all...the other 5%.....well......
There are some gr8 roms to choose from.....flexreaper, cm10 are my faves...but really, all the custom rooms here are fantastic and well supported.
If u need any further help feel free to ask!
And good luck
Sent from my A500 using Tapatalk 2

Related

[Q] Can 3.2 Stock Out of the box be rooted and how?

I just rec'd the new A500 8Gb version that already has 3.2 installed. So this is not the normal 3.2 OTA, which maybe the same. Don't know how to confirm.
I have read so many posts that appears to be rooting instructions for 3.0 and not for 3.2. I see one Thread that had instructions on how to root a OTA 3.2 but the instructions even says will take 1.5hrs. I have rooted tablets/phones before and i know it doesn't take that long and don't want to lose data.
I don't want to install a custom rom just so i can be rooted. I just want to root this tablet and i don't want to downgrade the bootloader.
Can anyone please point me to the correct thread or simply let me know if rooting is currently out of the question for this scenerio.
im on the same page, just picked up the 3.2 from costco.. A little common sense points me and you in the direction of downgrading to the 3.0.1.. Then bumping up to the rooted 3.2.. its not a one click solution but it makes complete sense..
http://forum.xda-developers.com/showthread.php?t=1276227
im doing it as i write this let you know my success..
Yeah I have read that an option is to downgrade to 3.0, root then go to 3.2. Guess i'm waiting on a short version that will root stock 3.2 and it doesn't make sense to me to go back only to go up versions of rom for this alternative route.
lol its data, not like your trading in your new car for a 87 nova.. Downgrade is for exploit access only as soon as root --> update recovery ---> flash rom you will be right back to 3.2..
:-/
anyways method 2 works.. did it in 15 minutes cause i got distracted..
good luck waiting for ur 1 click
cool, so i guess this is the best solution for now....i'll do the same.
IMPORTANT : Make sure you download the acer recovery installer while still on 3.2 as you WILL have problems accessing android market once you install the UNSTABLE 3.01...
Its pretty hard to hard brick but please , don't take that as a challenge...
The vanishing keyboard ...
ultramag69 said:
IMPORTANT : Make sure you download the acer recovery installer while still on 3.2 as you WILL have problems accessing android market once you install the UNSTABLE 3.01...
Click to expand...
Click to collapse
Agree; first hand experience ...
ultramag69 said:
IMPORTANT : Make sure you download the acer recovery installer while still on 3.2 as you WILL have problems accessing android market once you install the UNSTABLE 3.01...
Its pretty hard to hard brick but please , don't take that as a challenge...
Click to expand...
Click to collapse
lol wish I had known that when I rooted mine, I was freaking out scouring the interwebs for an apk of it when I downgraded cuz I couldn't use the damn keyboard
sent from my Acer Iconia A500 beast of a tablet via XDA app
I found out the hard way too, got the OTA update of 3.2 installed, then got the acer recovery installer downloaded. Was a colossal waste of time...
Thought I'd let others know, easier than having to stuff around yourself and hoping you can recover...
Thx for the heads up guys, i did install the acer recovery. Now i know why you need it since that 3.0 downgrade is very unstable. I did manage to root, install CWM and flashed a 3.2 rom.
I used this... straight root no downgrade required.
http://forum.xda-developers.com/showthread.php?t=1307539
Sent from my A500 using xda premium

point me in the correct direction please.

okay so iv had my tab for awhile now and had no need to root it since i used my phone for everything. iv been playing around on android for a bit now and before my milestone i had fun with windows mobile. so please do flame me as dumb and that i didnt look first. i see the bible for our tabs and that the root method doesnt work now. i used heimdall to flash a stock rooted ver of froyo and now it boots but i cant get past the activation screen. yes i have dont the vol up once vol down twice thing. it wont work and just sits on the screen. i can get past it. so now im about to go all the way back to stock and start over. if someone who is more familiar with the fourms then i am can post the links and steps i need to do to get back to a rooted tab that would be great and id be forever thankful. from then on im ok i bought that bootstrapper from the maket to save me time (plus i enjoy giving money to those who work hard for my free entertainment) oh btw should have said it first. i have the vzw i800 tab. thanks so much folks i really just want a working tab again. oh one last thing i have cm9 running ony my phone and love it...whats everyones thoughts on it for the tab?
once again thank you
so i get it this was a tall order and after getting everything working last night im up and runnning with a cwr rooted and on froyo....i wanna jump up to hc or cm9, or some kind of ics but i dont see much and the two i looked at and tried, the dl links are broke...so can anyone point me to the links of working hc or ics for a vzw tab please
really? no one?
For ICS/CM9
First do this...
http://forum.xda-developers.com/showthread.php?t=1317384
Then do this..
http://forum.xda-developers.com/showthread.php?t=1385153
DON'T!
Overcome isn't for cdma ran.
You will brick your device.
Sent from my GT-P1000 using XDA
i guess at this point i just need to make it ext 4. what vzw kernel is best for this? thanks for the replay
You don't need to make it ext4, you need a custom recovery so can flash ICS using CWM. The ICS zip will repartition and reformat anyway, so you have no need of converting to ext4.
You need a kernel with custom recovery (version 3.x or greater).
C.
cheatman said:
You don't need to make it ext4, you need a custom recovery so can flash ICS using CWM. The ICS zip will repartition and reformat anyway, so you have no need of converting to ext4.
You need a kernel with custom recovery (version 3.x or greater).
C.
Click to expand...
Click to collapse
im good then i have cm on it and i think its 3.0 i tried flashing 5.x with rom manager and t started acting funny till i rebooted the recovery. i tried to install cm9 but it told me there was a problem with the package and gave me a code 7 i think. maybe it was a bad dl. ill try and redownload right now and try again. the first time i did everything manually but this time i was lazy and bought the bootstapper. i should be good right? thanks for your help.
i just re dl it and checked the md5. everything was fine. tried to install it and gave me the same thing. error in sd card/cm9 blah blah blah.zip (status 7) this is the step im having problems with
Which cm9 you tried to flash.
Maybe the GSM one?
Better go to rootzwiki.com and look for jt1134's ICS built there.
Sent from my GT-P1000 using XDA
going to that site now. i hope it works. im kind of pissed off. every rom i try the dl link is broken or it doesnt flash. im back to stock re rooted and did the bootstrap. i just wanna get off of froyo at this point.
sorry if I am leading you on a chase.
I am not a CDMA user, that is why I don't really know where you should get your CDMA build.
But I found this
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Go there, and find on 2nd line that says Alroger's Downloads.
That points to Alroger's external site.
He has a P1000CDMA build of the "TE4M version of CM9"
That will be your best bet.
jt1134 is also a TE4AM dev I think, or at least lots of his code in it.
priyana said:
sorry if I am leading you on a chase.
I am not a CDMA user, that is why I don't really know where you should get your CDMA build.
But I found this
http://forum.xda-developers.com/showpost.php?p=24986629&postcount=756
Go there, and find on 2nd line that says Alroger's Downloads.
That points to Alroger's external site.
He has a P1000CDMA build of the "TE4M version of CM9"
That will be your best bet.
jt1134 is also a TE4AM dev I think, or at least lots of his code in it.
Click to expand...
Click to collapse
no your not leading me to anywhere bad. its just a lack of upkeep on a old deivce its just harsh. im on that site you told me about and im finding a lot. im thankful youre helping me with this. do you know why im getting a error code (status 7) any and everytime i try flashing cm9? this is the nly things that stands in my way
from what I understand, error 7 is when the device you are flashing is not supported by the package.
Say earlier you tried to flash a p1000 rom into a cdma device.
I am almost convinced that if you get the right package, namely the one for cdma or "p1c" build, you should be able to flash it.
jt1134 is the most knowledgeable on CDMA CM9 builds.
yeah im on p1c builds and cdma builds....do you think its because im trying to go from froyo right to ics with out gb? should i flash cubbed in heimdall (3.2.x) before going to ics? or does it not matter on this device?
once again im so thankful for your help
which CWM version you have?
Apparently you need to have the latest 5.x.x ?
3.0...damn i didnt even think of that and i sould have thats whats going on with the photon right now. trying now thanks
that worked! thanks for the help

[q] rooted HC to ICS - how?

OK, I rooted my A500 towards the end of last year since it didn't seem like Acer was going to keep up with the latest Android operating systems.
I checked in here recently and saw that ICS has been released for the A500. Joy.
So, I used CWM v5.0.0.0(thor2002ro rev1.3.4) to try and flash the rooted Acer OTA ICS. I figured I'd try the original ICS before I start flashing other people's ICS roms.
All went well until the reboot. It froze on the ACER screen and would go no farther. I figured that perhaps the cache/data/dalvik didn't clear the first time so I repeated those steps. format data user reset, clear caches, clear bat stats. Reflashed rom.
Reboot.
Stuck at ACER screen again.
I searched the forums and found that I need a different bootloader? There are a bunch of threads, but I can't seem to make sense of them.
Can someone please give me a step-by-step plan to get this thing from where I'm at to ICS?
I did get my tab working again by repeating whole process but installed HC 3.2.1 Flexstriker r9.6. It booted up into the rom just fine.
I guess this thread - http://forum.xda-developers.com/showthread.php?t=1622425 - is close to what I need but it's tough to follow with all the different options and colors/fonts...
Can anyone help me down the right path?
Thanks in advance.
You can flash one of Civato's old Flexreaper roms on a HC bootloader. Since it is an ICS rom you can just update the boatloader as mentioned in the thread you linked.
I would suggest flashing Flexreaper 9 or something, his newer roms require you already have the ICS BL on. After you update the BL then just upgrade to one of his newer roms. They work very well. I've personally had no problems at all with his roms.
but....
If you want the stock Acer ICS, you have to downgrade all the way back to the old 3.x unstable rom and let it update from there. It will take a few updates, but it should get you to ICS.
Sorry, but this is a development forum not questions and answer, xda is strict about keeping things organize, please read the rules and guidelines.
Sent from my A500 using XDA
starkiller86 said:
....
If you want the stock Acer ICS, you have to downgrade all the way back to the old 3.x unstable rom and let it update from there. It will take a few updates, but it should get you to ICS.
Click to expand...
Click to collapse
Any guide on this? I need it for warranty issues (charging stops after few minutes with power light flashing white / amber) Search is not working and there is no "going back to stock" thread in the dev section sticky roll-up thread.
The thought of going back down and then upgrading back up didn't appeal to me.. So, I bit the bullet and tried to make sense of the thread I mentioned... I managed to get through it and I now have the sandwich on my tablet.
What a pain in the.......
OK... ready for the jelly bean leaks now.
starkiller86 said:
You can flash one of Civato's old Flexreaper roms on a HC bootloader. Since it is an ICS rom you can just update the boatloader as mentioned in the thread you linked.
I would suggest flashing Flexreaper 9 or something, his newer roms require you already have the ICS BL on. After you update the BL then just upgrade to one of his newer roms. They work very well. I've personally had no problems at all with his roms.
but....
If you want the stock Acer ICS, you have to downgrade all the way back to the old 3.x unstable rom and let it update from there. It will take a few updates, but it should get you to ICS.
Click to expand...
Click to collapse
I did read the rules/guidelines..
It's a question about development (or at least how to use some developed tools), so I put it here..
If it doesn't belong here, then perhaps a mod would be so kind as to move it..
At this point, the thread really could be deleted as the original query is handled.
However, tkolev has added a question.
lifeofcoding said:
Sorry, but this is a development forum not questions and answer, xda is strict about keeping things organize, please read the rules and guidelines.
Sent from my A500 using XDA
Click to expand...
Click to collapse

General hello n advice

Hay chaps/ladies
Got me self a acer iconia on the way not sure if its running honeycomb
Im looking to root and upgrade to ics stable I'm. Regular sensation flasher so used to that
But looking threw a few threads I'm looking a little lost lol seems alit tricker to root and upgrade to ics with custom recovery n Rom
Could I possibly get some advice I now I'm guna get a few people telling me to read before posting etc thanks please b nice we all start some where
Thanks for advice spud
daddyspud said:
Hay chaps/ladies
Got me self a acer iconia on the way not sure if its running honeycomb
Im looking to root and upgrade to ics stable I'm. Regular sensation flasher so used to that
But looking threw a few threads I'm looking a little lost lol seems alit tricker to root and upgrade to ics with custom recovery n Rom
Could I possibly get some advice I now I'm guna get a few people telling me to read before posting etc thanks please b nice we all start some where
Thanks for advice spud
Click to expand...
Click to collapse
Over the air to ics, use for a week to see how it runs for you. Then make your mods, that way you can compare and know what messed it up.
If I do ota will I b able to root the device or do I root the. Ota as hmmm
daddyspud said:
Hay chaps/ladies
Got me self a acer iconia on the way not sure if its running honeycomb
Im looking to root and upgrade to ics stable I'm. Regular sensation flasher so used to that
But looking threw a few threads I'm looking a little lost lol seems alit tricker to root and upgrade to ics with custom recovery n Rom
Could I possibly get some advice I now I'm guna get a few people telling me to read before posting etc thanks please b nice we all start some where
Thanks for advice spud
Click to expand...
Click to collapse
To find outr what you're currently running - Settings>About Phone
Rooting/custom recovery ICS is the easy bit...icsRoot will do the job, and Acer Recovery Installer from the market to install a recovery....
flashing the bootloader (needed for some custom roms) seems to get a few people confuddled, there are plenty of guides to help you there...and plenty of 'help, I'm bricked threads' too so have all your ducks in row before you go down that road
You need the acer drivers from acer and also the google USB drivers, once you have the drivers set and a custom recovery then do a backup, it will generate a "uid.txt" file in the backup folder...copy this file and guard it with your life!!!!! This is the infamous CPUID...from which you get your tabs "secure boot key" IF anything goes wrong then this cpuid is the only thing that will un-unbrick you!!! Make sure you get this before you say goodbye to HC as ICS reports your serial no. which aint gonna work, its by far the easiest way to get yr cpuid, so do yourself a big favour!!!
Honeycomb cannot be rooted...., but there are pre-rooted HC roms around, ezterry has one and also has a nice stock based ICS with a custom kernel. timmydean also has one - the good thing about his one is that its one of only 2 ways to downgrade back to HC, needed if you bork the bootloader flash or are unlucky enough to get a tab that gets 'stuck formatting/partitioning' in nvFlash
As far as actually getting ICS, as shaun said, wait for yr tab to update itself - you'll need to d/l the acer enhancement something-or-other from the market. OR just flash an ICS stock or custom rom - there are normally 2 different kernels for the custom roms "one for the patched bootloader 3.12+ and one for BL 3.01" acer recovery installer will tell you which one you have but if you havent flashed the patched BL then you'll be on the 3.01.
think thats about it for now!!! happy flashing

[Q] Acer_AV041_A500_RV15RC01_GC_GEN1...help

Hi, My A500 bricked its self and I sent it for repair. 9 weeks later and it comes back but play market is gone and in its place I have go market in chinese.
Plus 5 apps also in chinese.
Not being able to speak/read chinese I find this mildly anoying.
I have managed to root it using afterota. Many thanks.
Now I'm stuck, should I try to flash a new rom or send it back to acer.? If flashing myself a good guide would be needed.
Here is the info
Android version
4.0.3
Kernel version
2.6.39.4+
Image version
Acer_AV041_A500_RV15RC01_GC_GEN1
Build number
Acer_AV041_A500_1.050.00_GC_GEN1
Image P/N
FM.S14A0.01L
Any advice would be welcome.
Cheers.
twistedknickers said:
Hi, My A500 bricked its self and I sent it for repair. 9 weeks later and it comes back but play market is gone and in its place I have go market in chinese.
Plus 5 apps also in chinese.
Not being able to speak/read chinese I find this mildly anoying.
I have managed to root it using afterota. Many thanks.
Now I'm stuck, should I try to flash a new rom or send it back to acer.? If flashing myself a good guide would be needed.
Here is the info
Android version
4.0.3
Kernel version
2.6.39.4+
Image version
Acer_AV041_A500_RV15RC01_GC_GEN1
Build number
Acer_AV041_A500_1.050.00_GC_GEN1
Image P/N
FM.S14A0.01L
Any advice would be welcome.
Cheers.
Click to expand...
Click to collapse
well i wouldnt want to let acer near it after that! Been a few reports of this happening after 'repair'...
Do you have a custom recovery installed...cwm, twrp etc??
civato has a "Official Acer Stock Roms ICS Rooted" thread check it out. D/L as applicable version and put it on yr ext sd card.
Install via cwm!!!
U do have a custom recovery installed??
If not then you will need to flash the unlocked bootloader
There is a 'tool' to help the process called 'afterOTA'
Personally I prefer the manual method via nvFlash but you'll be fine with afterOTA.
You will need the following:
A PC
A good quality micro usb cable.
The Acer Drivers and adb and fastboot from the android sdk.
Drivers installed correctly
a fully charged or at least 70% battery
the flash itself takes less than 30 seconds
getting set up to do the flash successfully will take al least an hour usually more!!!! some of us have been stuck for days after 'softbricking'- i lie not!!!!!
So take your time read thru the Guides and follow the steps to the letter - good luck
Ok' I'm going in.
.....
No luck I'm affraid, I've tried everything including all the flash tools. No joy.
It won't work with nvFlash or blackthund3r
Will not boot into recovery. I get the recovery verified failed message.
So now I'm really stuck' looking like acer here I come unless anyone else has any ideas?
trying he alternate root method (blackthund3r)
I'm stuck at stage 2 uploading image. does anyone know how long this should take.
sorry to ask here but i cant post in blackthund3rs topic im a noob
twistedknickers said:
trying he alternate root method (blackthund3r)
I'm stuck at stage 2 uploading image. does anyone know how long this should take.
sorry to ask here but i cant post in blackthund3rs topic im a noob
Click to expand...
Click to collapse
d/l timmydeans v4 from cpuid thread. this will reset yr partitions and u should be good to go - you'll end up rooted, cwm on HC 3.2...flash the boootloader from there
Sent from my GT-I9300 using Tapatalk 2
dibb_nz said:
d/l timmydeans v4 from cpuid thread. this will reset yr partitions and u should be good to go - you'll end up rooted, cwm on HC 3.2...flash the boootloader from there
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
i have looked at that but all the links are dead
you mention that you have a working link in that post, if you could pm or post it that would be great. :laugh: cause im about ready to see just how far i could throw this tab
please disregard my last post, i think ive found it. :good:
*****all fixed*****
Thanks for the advice. Your great !
And thanks to all the other devs and xda.
twistedknickers said:
*****all fixed*****
Thanks for the advice. Your great !
And thanks to all the other devs and xda.
Click to expand...
Click to collapse
Fab!! were the links OK in that thread don't know why they wouldn't be, i will check when i get home....
Sent from my GT-I9300 using Tapatalk 2
no none of the links I tried were working.
.................
wow is all I can say, with lots of reading and a lot of help from xda members I now have a smoking A500. !
I've installed [ROM]ICS FLEXREAPER-RELIX-GT/ ICS RE-FLEXxx-ShellSHOCK_AROMA(10-Okt-2012)3GUSB
and I love it.
I live on a small island and my machine was with acer for 9 weeks. They sent it back to me and it was a piece of crap.
2 days and xda's help and now its flying, literally :laugh:.
please keep up the good work

Categories

Resources