Ok, so last night I dropped my Dell Streak on a drunken night out. The LCD display is shot, and I can't even get the screen to function. The glass has not cracked!
Anyway I need to get access to my phone, and have been trying to use MyMobiler to control the phone screen from the PC. However I don't have the USB function enabled on my phone. So when I am plugging the phone to PC and running MyMobiler, there is no USB connection (as it's not enabled on the device)
So with no use of the screen, is there any other way I can control the screen on my Dell Streak, via the PC via USB? As I ideally need to have that "enable USB connection" option checked on the phones menu.. but can't,as the screen is shot!
Any help on this please??
Related
Phone's screen (display) suddenly died, everything else still works. Are there any ways I can control the phone 'blind'?
Short cut to turn on accessibility, or have everything on screen read aloud
Control the phone via PC
Mirror the phone on the PC
Only thing I found so far is [email protected], which requires turning on the USB debug option--a little difficult since I can't see the screen.
Thanks
Ive used [email protected] I used that and then installed teamviewer then created a connection to my pc.
Try that. There really isn't much to do with a dead screen sorry man,
Dropped phone, screen + digitizer is broken. I have never rooted my phone. I didn't put a screen lock luckily, and I know the USB debugger is off.. Is there any way I can still download an app or do something via the android manager on my computer remotely to see my phone's screen on my mac?
Long and short of it is a company replaced a shattered screen. Then, the new screen began to peel away and then the connection became so bad that the screen is not functional. I just get a blank screen. I need to rip all of that data off the old phone so I can back it up and put it on a new phone (courtesy of the company that replaced the screen).
Here's where it gets tricky. The USB connection mode is charge only. I need to set it to MTP, but can't because the screen has lost all functionality. Without MTP, neither Android File Transfer nor Smart switch can't connect to the phone. I think Sidesync would work, but I can't install it on my phone.
An MHL cable won't help because it mirrors what is on the screen, but I can't select anything....
Are there any tricks out there that can help me before I have to send the old phone back in?
Thanks in advance!
You'll have to try fixing it temporarily . youtube has some good info
andyking33 said:
Long and short of it is a company replaced a shattered screen. Then, the new screen began to peel away and then the connection became so bad that the screen is not functional. I just get a blank screen. I need to rip all of that data off the old phone so I can back it up and put it on a new phone (courtesy of the company that replaced the screen).
Here's where it gets tricky. The USB connection mode is charge only. I need to set it to MTP, but can't because the screen has lost all functionality. Without MTP, neither Android File Transfer nor Smart switch can't connect to the phone. I think Sidesync would work, but I can't install it on my phone.
An MHL cable won't help because it mirrors what is on the screen, but I can't select anything....
Are there any tricks out there that can help me before I have to send the old phone back in?
Thanks in advance!
Click to expand...
Click to collapse
You can try and take a phone with the same os. If you have 2 computers its best (maybe one laptop or something). Turn both the phones off and connect them both to the computers and turn them both on. Look at the one that you see his screen and press the same places on your phone..
Sent from my OnePlus3 using XDA Labs
I'm in the same boat, have you found a way?
Hi, Today I dropped my phone and the screen is gone. the phone inside is still alive. I need to mirror the screen onto my computer so that I can sort some things out on it. Is this possible without put a client onto the phone? It is rooted.
Thanks.
S
you can do it with a microusb to hdmi cable, no actions required - but your touchscreen must be operative, otherwise you can do nothing. If you want to recover files simply connect device to a pc
Hi,
I broke my LCD display a couple of months ago still, I managed to use the phone with the epaper display and eventually reinstall it without clearly writing down the exact procedure (with Lolipop)
Today, as my Marshmallow update freezed, I had to wipe all, thinking well I could easily find the steps to start the phone again.
The only problem remains that Setup Wizard wants us to use the LCD display, and I can't.
The last time I managed to use screen mirroring on Windows, with androidscreencast-0_3_1.jnlp, which is dicontinued.
To that extend, I allowed USB debugging (three lines to add) on system/build.prop and default.prop and copied a file from my computer (adbkeys.pub) to a certain folder in the device, to allow my PC to operate on the cellphone
But that last step doesn't work anymore.
I can see a dialog briefly popping up on the yotaphone, prompting me to allow the computer for debugging, but I can't click.
Droid Explorer tells me that this yotaphone is not allowed in $Vendor (or so on, I can't remember well).
So I managed to authorize the screen mirroring before, to start the phone, but I can't right now, although I found a new app, androidscreencast-0.0.10s-executable.jar.
I would have to copy adbkeys.pub to data/misc/adb/adb_keys, but as of today, that directory doesn't exist.
Can somebody please help me with that?
Thanks,
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
wicoz said:
Hi,
I solved a similar situation by plugging a mouse to the phone using a usb to micro USB adapter (also called USB OTG adapter).
Click to expand...
Click to collapse
Thank you for answering. And what do it do to plug a mouse?
I've made it : the phone starts again.
If anyone is interested, I'll tell the trick for a broken front screen like mine.
Now I'm looking forward to make an image backup of it as it is very fresh if it can save me or others !
And I need advices for that?
Hi!!!
I have the sale problem
How did you bypass the wizzard???
hi. how do you bypass setup wizard? i had mine reset due to stuck. before im using only back screen. please help!
My front screen also stopped working all of a sudden without me doing anything. I was able to use the eInk so I did a factory reset. Now however I'm stuck since I can't boot the phone without a working front screen. I was wondering if a software issue stops the front screen from working and if there is a way to check/fix it.