Database Users

Show your SetCPU Profile for the Legend

Hey everyone,
i think it would be interesting if we collect some SetCPU Profiles.
The App you can find here:
SetCPU for Root Users [2.1.0]
Maybe someone has found allready a good Profile for saving battery but having enough CPU-Power for a smothy work on the Legend?
I have used this Profile for a while, but i think through the overclocking there´s to much battery waste and no really noticable better performance with the apps i use.
Temp > 40° Priority 100
122min | 245max
Screen Off Priority 70
122min | 245max
Battery < 20% Priority 60
122min | 480max
Battery < 50% Priority 50
122min | 600max
Battery <101% Priority 40
122min | 806max
Some interesting Posts about SetCPU:
[TUT] SetCPU and Advanced Settings
Greetz picz

245/787, interactive
That is all

122/768 ondemand....
Is interactive better than ondemand? I mean from fast response/battery life POV...

Main
787 max, 245 min, interactive
Battery 40%
600 max, 245 min, interactive
Screen Off
400 max, 245 min, Ondemand
Screen Off and Battery 40% both at priority 50

Dr.Romca said:
Is interactive better than ondemand? I mean from fast response/battery life POV...
Click to expand...
Click to collapse
I read this in an other board:
From what i've read, "Interactive" is a bit more aggressive at ramping up CPU speed based on load, and is slower to drop off to "idle" speeds once the demand has passed.
"Ondemand" is a bit more conservative in the way it reacts; and will drop back to "idle" speed more quickly.
"Interactive" makes the device significantly snappier, at the cost of battery life. "Ondemand" will last a bit longer batterywise, however; the device will seem a bit sluggish at times.
Click to expand...
Click to collapse

I can't go below 245 how r u guys managing it ?
Swyped from my legend using XDA app

Maybe your kernel doesnt support this? Which ROM do u use?
Sent from my HTC Legend using Tapatalk

picz said:
Maybe your kernel doesnt support this? Which ROM do u use?
Sent from my HTC Legend using Tapatalk
Click to expand...
Click to collapse
cm 6.1
kernel 2.6.29.6

245/787mhz
Can anyone tell me the differences between ondemand, performance, interactive etc.? I can't seems to find the comparison between these in google, xda etc.
Please help me! I'm sure there's people out there who wants the answer as well

picz said:
Some interesting Posts about SetCPU:
[TUT] SetCPU and Advanced Settings
Click to expand...
Click to collapse
You can find it in this Threat.

Can anyone tell me the differences between ondemand, performance, interactive etc.? I can't seems to find the comparison between these in google, xda etc.
Please help me! I'm sure there's people out there who wants the answer as well

Ram of repencis? please Do help me?

Okay i start with my 1st RAMUSAGE
its about 190-240mb then i use v6supercharger and find bloatware and freeze of all them so that they will not run on background
and then i GOT 171-186-220mb or RAM so im thinking if there anymore bloatware?all of them maybe???
coz somewhere here he helps me i forgot his name but he go 130-160mb RAM usage using repencis with v6 and freeze bloatware
thanks in advance More power XDA

yabyuh22 said:
Okay i start with my 1st RAMUSAGE
its about 190-240mb then i use v6supercharger and find bloatware and freeze of all them so that they will not run on background
and then i GOT 171-186-220mb or RAM so im thinking if there anymore bloatware?all of them maybe???
coz somewhere here he helps me i forgot his name but he go 130-160mb RAM usage using repencis with v6 and freeze bloatware
thanks in advance More power XDA
Click to expand...
Click to collapse
i do beleive ram usage of repencis 3.5 is small...creeds 3.5 is the one that has very high ram usage

ronnieryan said:
i do beleive ram usage of repencis 3.5 is small...creeds 3.5 is the one that has very high ram usage
Click to expand...
Click to collapse
Hmm..nope imo both have heavy ram consumption Creeds better with an init.d working kernel since it got very good init.d scripts included in it.

i think it depends on application that start on boot.. like dps im the man that dont want music though kinda want it a bit.. D at 1st install i got 190-240 just like mention because of built in apps try to use it D

hitme987 said:
Hmm..nope imo both have heavy ram consumption Creeds better with an init.d working kernel since it got very good init.d scripts included in it.
Click to expand...
Click to collapse
what do you prefer? repencis v3.5 or Creeds 3.5?

yabyuh22 said:
i think it depends on application that start on boot.. like dps im the man that dont want music though kinda want it a bit.. D at 1st install i got 190-240 just like mention because of built in apps try to use it D
Click to expand...
Click to collapse
DSP takes max of 4mb ram bro. Not a big deal. Creeds 3.5 has very minimal running apps compared to rep 3.5 and it has stock kernel. Beginners dont know how to use repencis kernel effectively, if they dont underclock the cpu and change governers/i/o or stuff , creeds 3.5 is better since stock kernel is better optimized for normal usage

hitme987 said:
DSP takes max of 4mb ram bro. Not a big deal. Creeds 3.5 has very minimal running apps compared to rep 3.5 and it has stock kernel. Beginners dont know how to use repencis kernel effectively, if they dont underclock the cpu and change governers/i/o or stuff , creeds 3.5 is better since stock kernel is better optimized for normal usage
Click to expand...
Click to collapse
HEY BRAH?! can you prefer a link where i can use the repencis kernel much better im new to this stuff but im a fast learner D can i be your apprentice?

Hmm..no problem. Just shoot with whatever you want. Im quite busy these days due to my university schedules a bit hectic, but can spend some time with this stuff.
Heres the repencis kernel you asked for :
http://forum.xda-developers.com/showpost.php?p=27676983&postcount=657

hitme987 said:
Hmm..no problem. Just shoot with whatever you want. Im quite busy these days due to my university schedules a bit hectic, but can spend some time with this stuff.
Heres the repencis kernel you asked for :
http://forum.xda-developers.com/showpost.php?p=27676983&postcount=657
Click to expand...
Click to collapse
thanks for this D so what i need to do is to underclock my SGY??
im using repencis v3.5
my kernel is
2.6.35.7
[email protected]#36
so how i will use this? kernel stuff?

yabyuh22 said:
thanks for this D so what i need to do is to underclock my SGY??
im using repencis v3.5
my kernel is
2.6.35.7
[email protected]#36
so how i will use this? kernel stuff?
Click to expand...
Click to collapse
Your kernel support underclocking by using setcpu or no-frills cpu or antutu cpu master or cpu tuner.
Once you use them youll get to know.
Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving.

hitme987 said:
Your kernel support underclocking by using setcpu or no-frills cpu or antutu cpu master or cpu tuner.
Once you use them youll get to know.
Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving.
Click to expand...
Click to collapse
OMG! so many new word poping in my head right now
the set cpu thing i set it ung 624x312 coz i see it on the toturial on REPENCIS v3.5
but this
"Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving"
can you refer a link to me? if you could it will be nice..

yabyuh22 said:
OMG! so many new word poping in my head right now
the set cpu thing i set it ung 624x312 coz i see it on the toturial on REPENCIS v3.5
but this
"Use Lagfree or lionheart or smoothass governer with sio i/o for gaming or heavy performance.
Use smartassv2 governer and sio i/o for balanced performance.
Use ondemand or conservative governor with deadline i/o for battery saving"
can you refer a link to me? if you could it will be nice..
Click to expand...
Click to collapse
Hmm..Its the frequencies mate. It ranges 312-624-832. Use 312-624 for battery saving/balanced and 312-832 for performance/more balanced and use the governor combo I gave before. Just mess around with the setcpu app. Youll know it eventually. And use the latest setcpu . It has more features and easy to understand,

hitme987 said:
Hmm..Its the frequencies mate. It ranges 312-624-832. Use 312-624 for battery saving/balanced and 312-832 for performance/more balanced and use the governor combo I gave before. Just mess around with the setcpu app. Youll know it eventually. And use the latest setcpu . It has more features and easy to understand,
Click to expand...
Click to collapse
now i get between the setting about frequencis so i will use 312-832
i got the set cpu 3.0.0 and i will apply it
and what about the governor thingy? where will i get them?
and the benefits all of these is for ram and for fast and stable SGY?

yabyuh22 said:
now i get between the setting about frequencis so i will use 312-832
i got the set cpu 3.0.0 and i will apply it
and what about the governor thingy? where will i get them?
and the benefits all of these is for ram and for fast and stable SGY?
Click to expand...
Click to collapse
Check out the app dude. It got everything there. Its for the purposes I mentioned before. Basically, it is for more battery saving

hitme987 said:
Check out the app dude. It got everything there. Its for the purposes I mentioned before. Basically, it is for more battery saving
Click to expand...
Click to collapse
thanks master!!! i just download the set cpu 3.0.4 D i must explore it ima get you back later tomorrow thanks for the time i mean it really thanks D:good::good:

And oh last question do I set 832 to max and 312 to min??

yabyuh22 said:
And oh last question do I set 832 to max and 312 to min??
Click to expand...
Click to collapse
Yes. Its obvious dude.

hitme987 said:
Yes. Its obvious dude.
Click to expand...
Click to collapse
hey master.. i got shock its 1st time in history of my battery
when ever i got to sleep example my battery percent it 86%
when i wake up my battery is either 86%-85%-84% its just like that i will not go 79% like that
but when i wake up i touch my phone and its kinda bit Hot this time my battery when i sleep is 92% then when i woke up
the battery percentage is 56%
what should i do? i set the right
i set ondemand and deadline
and 312min and 832 max

Try opening terminal and input
su
a2sd lowmem-ultimate
Sent from my GT-S5360 using xda premium

yabyuh22 said:
hey master.. i got shock its 1st time in history of my battery
when ever i got to sleep example my battery percent it 86%
when i wake up my battery is either 86%-85%-84% its just like that i will not go 79% like that
but when i wake up i touch my phone and its kinda bit Hot this time my battery when i sleep is 92% then when i woke up
the battery percentage is 56%
what should i do? i set the right
i set ondemand and deadline
and 312min and 832 max
Click to expand...
Click to collapse
Wierd. Are you sure after this change only this happens? Change governor to bcm21533 and io to noop and 312-832 for the stock or original your before frequency. Try using smartass v2 or interactive or conservative and check the battery drain.

[Solved]smartassv2 or interactive. which one battery save?

recently im flashing percy gnu#9 kernel on my gy..
im stuck choosing right gov for me.. dont tell another gov as i already make some researh through google but cant find any source about smartassv2 vs interactive..
furthermore gnu#9 didnt have ondemand which i use before..
i choose this two because it balance between perfomance and battery life..
please help me between this 2 gov, which one is most battery friendly and what io sched best for it..
sent via Sony W880i

assphere said:
recently im flashing percy gnu#9 kernel on my gy..
im stuck choosing right gov for me.. dont tell another gov as i already make some researh through google but cant find any source about smartassv2 vs interactive..
furthermore gnu#9 didnt have ondemand which i use before..
i choose this two because it balance between perfomance and battery life..
please help me between this 2 gov, which one is most battery friendly and what io sched best for it..
sent via Sony W880i
Click to expand...
Click to collapse
go for interactive bro!!

assphere said:
recently im flashing percy gnu#9 kernel on my gy..
im stuck choosing right gov for me.. dont tell another gov as i already make some researh through google but cant find any source about smartassv2 vs interactive..
furthermore gnu#9 didnt have ondemand which i use before..
i choose this two because it balance between perfomance and battery life..
please help me between this 2 gov, which one is most battery friendly and what io sched best for it..
sent via Sony W880i
Click to expand...
Click to collapse
i always use smartassv2 and sio
check this one out http://forum.xda-developers.com/showthread.php?t=1369817

DEVILKOIRALA said:
go for interactive bro!!
Click to expand...
Click to collapse
tq for that..
percy_g2 said:
i always use smartassv2 and sio
check this one out http://forum.xda-developers.com/showthread.php?t=1369817
Click to expand...
Click to collapse
already try out with ur kernel.. but my cpu always stay at 468 freq when i'm browsing and i realise battery comsumption a little more then interactive..
so i revert back to use interactive that always stay at 168 freq in same environment which i see just a little battery consumption..
thats y i ask u to put ondemand gov in ur kernel..

Ondemand
Edit: I didnt read the full OP. New answer-Interactive . Smartass is for performance.
Sent from my GT-S5830 using xda app-developers app

thanks so much guys for helping me out..
interactive is my choise..
this thread already solved..
sent via Sony W880i

[Q]Need help with kernel and game

Hi everybody
I have use Nexus 4 for long time....and i get problem with Asphalt 8....when i play this game with stock rom it's no lag and very smooth....but when i try it with another rom like carbon, mahdi, cm11,...i always get some lag....i try some kernel hells core, hells doctor, experimental and set ondemand + noop + max 1.5Ghz + min 384Mhz and nothing change....can anybody tell me why and how to fix it ??? I love this game

tuandark said:
Hi everybody
I have use Nexus 4 for long time....and i get problem with Asphalt 8....when i play this game with stock rom it's no lag and very smooth....but when i try it with another rom like carbon, mahdi, cm11,...i always get some lag....i try some kernel hells core, hells doctor, experimental and set ondemand + noop + max 1.5Ghz + min 384Mhz and nothing change....can anybody tell me why and how to fix it ??? I love this game
Click to expand...
Click to collapse
use ROW, i think the problem here is the IO, dont use noop

C4SCA said:
use ROW, i think the problem here is the IO, dont use noop
Click to expand...
Click to collapse
so what governor is better ???
can u teach me how to set Governor, IO, UV for good battery life ???

tuandark said:
so what governor is better ???
can u teach me how to set Governor, IO, UV for good battery life ???
Click to expand...
Click to collapse
depending on the kernel u are using, u have different options.
to configure the kernel settings use any app like Trickster mod.
for battery life try to lower the max cpu frequency, u may undervolt a bit too but the most important is to choose a good governor that dont raise the cpu clock without any real need (keeping ur cpu a lower frequency == less heat and less voltage used == better battery life and somewhat better preformance ratio).
For IO: ROW, FIOPS or tweaked BFQ.
i recommend u to take a look at moob kernel (from @bedalus), and u will understand what i stated about UV not being the best way to save battery and produce less heat

I have a kernel for you to try http://forum.xda-developers.com/showpost.php?p=51373661&postcount=1199
I always appreciate help testing

phone is overheating and battery drain very fast - need help with under volting

Hello
I recently installed the rom:
[5.0.2] SIXPERIENCE [V2.0]
http://forum.xda-developers.com/galaxy-s5/development/sixperience-beta-s6-rom-g900f-t3097002
now my phone is overheating - 75-80 degrees C.
and the battery is draining very fast.
can any one recomend me good setting for under volting and setting the right govonor and schedulers for the Linux 3.4.0 - KT-SGS5-LP5.0-TW-G900-05.02.2015
Thanks
Shlomi

mr-blue001 said:
Hello
I recently installed the rom:
[5.0.2] SIXPERIENCE [V2.0]
http://forum.xda-developers.com/galaxy-s5/development/sixperience-beta-s6-rom-g900f-t3097002
now my phone is overheating - 75-80 degrees C.
and the battery is draining very fast.
can any one recomend me good setting for under volting and setting the right govonor and schedulers for the Linux 3.4.0 - KT-SGS5-LP5.0-TW-G900-05.02.2015
Thanks
Shlomi
Click to expand...
Click to collapse
Your phone is baking itself not overheating... Something is really wrong with this ROM! You can download profiles in KTweaker shop and check some of them.

qubbus said:
Your phone is baking itself not overheating... Something is really wrong with this ROM! You can download profiles in KTweaker shop and check some of them.
Click to expand...
Click to collapse
can you recommend me on governor and scheduler ?

Governor powersave to stop bakery under the hood. Scheduler have nothing to hot temp. It is responsible for flash memory. Stock is cfq

qubbus said:
Governor powersave to stop bakery under the hood. Scheduler have nothing to hot temp. It is responsible for flash memory. Stock is cfq
Click to expand...
Click to collapse
Hi
I don't have powersave
I got these:
conservative
intelliactive
intellidemand
interactive
lionheart
nightmare
ondemand
pegasusq
performance
slim
smartmax
whealthy
zzmoove
which is the best for powersave?
which is the best for performance?
which is the best that give you good performance and using the multicore CPU and doesn't consume much battery ?
about the schedular
which one is better for read/write to SD card CFG or SIO ?
Many thanks
Shlomi

What kernel are you using?

linux version 3.4.0 (boeffla-kernel-1.1-beta2-samsung=g900f20150513

Ask creator then why this kernel is killing your phone. I have never seen such temperatures on my device

thanks

@mr-blue001 try different kernel, imo there is something with settings on this one. I had never tested kernel which you are using so I can't tell anything more. I believe that in the author's thread you can get more accurate answers for your issue.