[Q] (Q)Razr m Rsd Lite problems.... - Droid RAZR M Q&A, Help & Troubleshooting

Hi guys, im an idiot and my razr m is stuck at the very end of the stock boot animation. so i have downloaded the fastboot files, put my phone in fastboot mode, but every time i hit "start" on RSD it says, "the phone failed to switch to fastboot mode"
what do i do? thanks so much

ok.........
straw5254 said:
Hi guys, im an idiot and my razr m is stuck at the very end of the stock boot animation. so i have downloaded the fastboot files, put my phone in fastboot mode, but every time i hit "start" on RSD it says, "the phone failed to switch to fastboot mode"
what do i do? thanks so much
Click to expand...
Click to collapse
so i figured out i was using x64, so i went to my desktop, tried the same process. now it is saying, "failed flashing process unknown boot command"(getvar)
any suggestions would be great folks, im pretty new to this, did have a droidx and successfully flashed rsd lite years ago.
Thanks!

straw5254 said:
so i figured out i was using x64, so i went to my desktop, tried the same process. now it is saying, "failed flashing process unknown boot command"(getvar)
any suggestions would be great folks, im pretty new to this, did have a droidx and successfully flashed rsd lite years ago.
Thanks!
Click to expand...
Click to collapse
Are you using the latest version of RSDlite (6.1.4)?
I was trying to work on the Razr M with an old ver of RSDlite and it does not work.

straw5254 said:
so i figured out i was using x64, so i went to my desktop, tried the same process. now it is saying, "failed flashing process unknown boot command"(getvar)
any suggestions would be great folks, im pretty new to this, did have a droidx and successfully flashed rsd lite years ago.
Thanks!
Click to expand...
Click to collapse
you need to remove any lines containing "var" "GetVar" or "oem" from the xml file and boot your phone into fastboot mode by holding all buttons

Related

Need Some SERIOUS Help PLEASE!

I was messing with the phone trying to do stuff and long story short I cannot boot up for nothing! Here's what I get:
- I turn it on, and all it says is:
FAILED TO BOOT 1
STARTING RSD MODE
Everything else is BLACK SCREEN
What I have tried so far.
Used rsd lite 4.9 and installed the SBF FILE:
OLYFR_U4_1.2.6_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
It reads and tries to flash but the atrix reboots on the SAME screen mentioned above. And the RSD on my PC says FAILED FLASHING PROCESS!
What more can I do guys/girls?
Is it bricked? Whoever shows me how to get it running I will gladly paypal you some money for your time. Thanks!
JasjarMan said:
I was messing with the phone trying to do stuff and long story short I cannot boot up for nothing! Here's what I get:
- I turn it on, and all it says is:
FAILED TO BOOT 1
STARTING RSD MODE
Everything else is BLACK SCREEN
What I have tried so far.
Used rsd lite 4.9 and installed the SBF FILE:
OLYFR_U4_1.2.6_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
It reads and tries to flash but the atrix reboots on the SAME screen mentioned above. And the RSD on my PC says FAILED FLASHING PROCESS!
What more can I do guys/girls?
Click to expand...
Click to collapse
You could start by removing external sdcard if you have one in there then try RSD flash back to 1.2.6.
CyberPunk7t9 said:
You could start by removing external sdcard if you have one in there then try RSD flash back to 1.2.6.
Click to expand...
Click to collapse
Removed it and the sim card.
Just downloaded RSD LITE 5.0 and it worked.
thanks cyberpunk for responding!
Should maybe not be in the dev forums???
sigh... This is why companies are making it harder to root.
Moved to proper forum.

Can't access recovery!

OK, so I have a D2 that someone gave me. It was completely stock (not rooted), but had all of their stuff on it still so I decided to do a factory restore through the android menus. The process started and the phone got stuck at the "M" logo, I left it for a few hours, and never budged.
I can NOT get into recovery, holding "X" and power on battery or connected to USB does nothing, have tried about 50 or 60 times now.
I can get to the bootloader and flash a new sbf (tried 2.3.20, 2.2.20, and downgrading the bootloader to d2.35) aside from the d2.37 bootloader I don't know of any other sbf's to try untill the GB one leaks, and who knows when that will be. I am using RSD lite 4.9 on win 7 x64, and 2.3.20 does not error out, also it identifies the phone as "s flash omap..." something instead of A955 or droid.
Sorry for the lengthy post, any help would be appreciated.
Edit: I tried flashing the 2.3.20 sbf from an ubuntu live CD with no joy. I just don't understand, i'm not getting any errors with ADB, it completes just fine, so recovery should be there for me to go into. The better part of 2 days trying to figure this out now.
Just a quick question, is recovery included in 2.3.20 full sbf?
Try it on a different computer. That worked for me. S flash is OK. As long as it says connected, you're good. You need to sbf. As long as you can get into Bootloader (2. 37)you can sbf.
Sent from my DROID2 using XDA App
That was the next thing I was going to try, need to get an OS on my old laptop to try, I have been busy so I should get to that sometime before the weekend. Dug out an old OG Droid that had the same issue that I could never figure out too, and got a custom recovery flashed, but no success on the full SBF or restoring a backup. Hopefully it is just this PC that is not playing nicely.
Thanks for the suggestion.
You can't get into recovery after you SBF? Is that what you mean?
wrichards2009 said:
You can't get into recovery after you SBF? Is that what you mean?
Click to expand...
Click to collapse
Exactly, it's like recovery is not there. Powering up while holding X does nothing, all I get is the "M" logo. I've let it sit and eat a whole battery just sitting on the "M". I will try to flash on another computer or two tonight and post my results.
Well I finally had time to try on another computer, and no luck. Used a freshly downloaded SBF, moto drivers and RSD Lite 4.8. Also I hadn't thought to check the logs before, and the FlashErrorLog has 4 errors, ERROR: AP Die ID, BP Die ID, AP Public ID and BP Public ID.
Everything went same as before, RSD completes with no errors. (well almost completes when I use my Motorola branded cord, stops at rebooting phone, and with my wifes LG branded cord, it reboots into the bootloader automatically, strange)
If anyone else has any ideas, I'm just at a complete loss here, willing to try something drastic at this point.
Having a similar problem, so hope you don't mind me piggybacking on your thread. I'm running 2.3.3 rooted on my D2, and I cannot boot into recovery either, but also can't get SBF to recognize my device on any computer. Any ideas?
How to get into Clockwork Mod
Is there a way to enter Clockwork MOD recovery on a rooted phone Manually? I am away from a computer, phone seems to be bricked need to get into recovery MANUALLY ...................

Failed to boot 4

Hi guys after having upgraded my AT & T Motorola Atrix gingerbread to version 1.83 I get this error: failed to boot 4.
how do I reset the phone? thanks
Flas sbf. Look in development for flashing sbfs. Tons of information. Also wrong section this should be under questions and answers section.
Sent from my MB860 using Tapatalk
Flash either full 4.1.26 or 4.1.57 sbf, then update OTA to 4.1.83.
And what do you mean Gingerbread?
Unless you flashed to 2.3.4 HKTW you don't have Gingerbread.
CaelanT said:
And what do you mean Gingerbread?
Unless you flashed to 2.3.4 HKTW you don't have Gingerbread.
Click to expand...
Click to collapse
commonsense suggests that, that's what he means.
Sent from rooted Atrix on 2.3.4 with unlocked bootloader using xda premium app.
alexrita said:
Hi guys after having upgraded my AT & T Motorola Atrix gingerbread to version 1.83 I get this error: failed to boot 4.
how do I reset the phone? thanks
Click to expand...
Click to collapse
Failed to boot 4
me too,help!!!
help!!!
help!!!
help!!!
veafin said:
Failed to boot 4
me too,help!!!
Click to expand...
Click to collapse
What did you flash, and how? Is your phone unlocked?
I suspect "Failed to boot 4" is when a filesystem is missing a signature. (And "2" is when the signed hash doesn't match the data)
If you are using RSD and a Motorola .sbf, shouldn't be a problem. Please explain in detail what you have done. If you want a quick fix, after flashing 4.1.83 SBF, if you still have this problem, go back and flash The2d's PUDDING (unlocked BL.)
(This fix will only work if you have unlocked your phone.. but the only way you could get this error is if you are trying to use fastboot without first unlocking your phone, or you are manually editing boot/recovery, or making .sbf files yourself...)
Please provide clear, concise details of what you've done.
eval is right, I got both failed to boot 4 and 2 in the past
if you have an att atrix you just need to flash 1.2.6 sbf then the 1.8.3 over it, unclok your bootloader then flashboot will go.
My cell phone is Hong Kong release, flashed Chinese simplified ROM,"掘墓者ME860国行官方ROM_OLYGC_U4_1.21.0.DearTanker"
when the tip is:
SVF:105:1:2
Failed to boot 0x1000
can't get the "RSD" and "fast boot"mode.
What can I do?
Same here...got "Failed to boot 4" error...
I had leaked 2.3.4 HKTW installed
I was trying to move back to 2.2...Keep getting errors when flashing to 1.2.6 as well...failing at the step where it says "Switching the device to BP mode"....Please help....
Hi,
I got that error when I had an sbf flashed and then I flashed a system.img from another firmware. Such a mismatch would also occur if an sbf was interrupted.
Cheers!
veafin said:
My cell phone is Hong Kong release, flashed Chinese simplified ROM,"掘墓者ME860国行官方ROM_OLYGC_U4_1.21.0.DearTanker"
when the tip is:
SVF:105:1:2
Failed to boot 0x1000
can't get the "RSD" and "fast boot"mode.
What can I do?
Click to expand...
Click to collapse
You cannot boot into RSD by holding volume-up on start?
We are lucky, when our phones fail signature/hash check, we are dropped directly into RSD mode. This seems not to be the case for you. Also, this message "Failed to boot 0x1000" is new to me, and so far seems only to have happened to ME860 users. I suspect fastboot gets the kernel (or something else?) loaded into memory at 0x1000, see:
Code:
000D173C .Unrecoverable bootloader error (
000D1760 [Fastboot]: Fastboot Entry
000D1784 Point ..Failed to boot 0x1000..LOG.
in bootloader CG from an extracted SBF. But... fails to boot kernel/microBoot? Hard to understand how a signed CG, which passed the check for your Boot ROM (same encryption keys) can have a kernel/? that does not boot on your hardware. Unless Moto has used similar keys with some hardware changes that means that .sbfs from international ROMs are not purely interchangeable? =(
And this is strange, since fastboot gives this error, so it is alive and in memory, should take some input: hopefully booting power-on + volume-down would be enough to get the menu of options, which includes RSD, same for booting power-on+volume-up key ? The inability to get into any fastboot / RSD menu looks like it could be a serious Moto bug... I hope whoever posted that SBF puts a huge WARNING for users of your model of phone...
I forgot to ask the 0x1000 people...
During any point during boot, does the device show up in usb? Command "watch -n .2 lsusb" in linux would do..
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
Look here,Please:http://forum.xda-developers.com/showthread.php?p=14673911
Again, do you ever see it appear on usb? In linux
# watch -n .1 lsusb
and keep your eyes open for Motorola PCS
That is your only hope... if we cannot even communicate with the phone via usb, well, it is pretty much a hard-brick.
Who made this [email protected]! Others are OK with it??
veafin said:
Thank bro…. I’ve try this way “As the devices is booting hold the volume up button”
But it is no use … the device is continue booting … again and again…
If it is work … at the top of the screen will show “strating RSD protocol ….”
But now my atrix didn’t show anything ..
And the screen won’t show any MOTO’s logo….
Does anyone can help me to save my atrix ?? > <
Please …
Look here,Please:http://forum.xda-developers.com/showthread.php?p=14673911
Click to expand...
Click to collapse

semi-bricked droid 2. MEM_MAP BLANK

Hey guys i got a Drodi 2, NON GLOBAL.
It is stuck in download mode only!
I tried to use RSD Lite and load 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf\1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf in it but it gives me an error
at the end it says "error in switching to BP pass through mode"
then it botos back up and gives me
Bootloader
D2.37
Err:A5,70,70,00,00
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
can somone point me in the right direction?
eric303 said:
Hey guys i got a Drodi 2, NON GLOBAL.
It is stuck in download mode only!
I tried to use RSD Lite and load 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf\1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf in it but it gives me an error
at the end it says "error in switching to BP pass through mode"
then it botos back up and gives me
Bootloader
D2.37
Err:A5,70,70,00,00
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
can somone point me in the right direction?
Click to expand...
Click to collapse
Try downloading this http://forum.xda-developers.com/showthread.php?t=1662091 = 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf.gz
supergear said:
Try downloading this http://forum.xda-developers.com/showthread.php?t=1662091 = 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf.gz
Click to expand...
Click to collapse
Tried that and now when it boots up it just gives me
Bootloader
D2.37
It auto boots into download mode. any other advice? I tried to do a wipe/data reset and when i hit reboot, takes me to
Bootloader
D2.37
did you get bp switching error again? read http://droid.koumakan.jp/wiki/Welcome
try redownloading sbf
what version of rsd lite are you using?
Sent from my DROID2 using xda app-developers app
tried the SBF twice on 2 different computers, same result. No but it did say fail. Then it only lets me turn it on to
Bootloader
D2.37
eric303 said:
tried the SBF twice on 2 different computers, same result. No but it did say fail. Then it only lets me turn it on to
Bootloader
D2.37
Click to expand...
Click to collapse
Which version of RSD Lite are you using? version 5.6 works for me
supergear said:
Which version of RSD Lite are you using? version 5.6 works for me
Click to expand...
Click to collapse
i'm using 5.0 I'll give 5.6 a shot
Tried it on RSD 5.6. I get error failed in switching phone to BP pass through mode. (0x70BE)
plz help
read http://droid.koumakan.jp/wiki/SBF
Note: Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly. In such case, the flashing process will abort, and your phone won't be able to boot normally. RSDLite shows the following error message:
Error switching phone to BP Pass through mode
To get around this issue, once you get a Device driver could not be installed message from Windows, don't close RSDLite nor power off the phone. Start Motorola Driver Installer once again, and let it finish. Then if RSDLite didn't timeout yet, head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally. If RSDLite timed out and you got an error from it, just repeat the SBF process. The driver should now be present, and the flashing process will finish normally.
Once the flashing process is complete, RSDLite will tell you to “power the phone up manually”. In most cases you won't be able to do this straight as instructed: the phone will be bootlooping. Take the battery out, and then place it back in. Press the lock/power button: the phone should boot normally.
Close RSDLite. Disregard the warning about flashing not being completed since your phone has already booted into Android.
In case you still get bootloops after pulling the battery, refer to Android Recovery.
Click to expand...
Click to collapse
---------- Post added at 06:58 PM ---------- Previous post was at 06:43 PM ----------
or just use ezSBF
no drivers needed
http://www.droidforums.net/forum/droid-2-hacks/161849-tool-ezsbf.html

[Q] Razr M is half-bricked, half-not. Help?

Okay, so I've rooted and all before but it's been almost two years (last phone I rooted was a Samsung Fascinate).
So I was working on flashing MIUI to my razr m, I have it rooted but not unlocked. Using Safestrap, I followed all the directions here http://forum.xda-developers.com/showthread.php?t=2189196, up until the point where it said to flash eclipse. Me being a n00b, tried flashing MIUI instead, thinking this meant to flash the ROM of my choice.
Now my razr is showing the "AP Fastboot Flash Mode screen", and at the bottom it says "Failed to hab check for boot: 0x56 Fastboot Reason: Boot Failure.
I've tried holding power + vol up + vol down, and it gives me some options, but if I select one of them, it does nothing, and instead goes back the aforementioned screen after a few seconds.
Anyone know a way I can get out of this? I don't care if I have to wipe everything, everything's safely in another place.
Respond quickly, and thank you!
DROID RAZR m utility maybe. Or rsd lite
Sent from my XT907 using xda app-developers app
Tried RSD
poppers162 said:
DROID RAZR m utility maybe. Or rsd lite
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
I've been trying RSD lite, but it doesn't seem to be recognizing my device. Nothing happens when i click "show device" or "start" and it doesn't give me the option for "decompress and start flashing". But the phone does appear in device manager, and I've tried somewhere around 8 different USB cables.
http://forum.xda-developers.com/showthread.php?t=2176753
Hd or m just use the xml, also known as the strange fxz, for your phone.
My signature has more links
Try using rsdlite 6.1.4 if.
FIXED IT!
aviwdoowks said:
http://forum.xda-developers.com/showthread.php?t=2176753
Hd or m just use the xml, also known as the strange fxz, for your phone.
My signature has more links
Click to expand...
Click to collapse
This helped, thank you! I used House of Moto, and even with that RSD wouldn't pick up my device. So i chose fastboot in the House of Moto menu and all was well. My phone is back to stock, and i think I've learned my lesson about flashing without being unlocked. Thanks again, now I don't have to use my backup: a three-year-old blackberry bold. lol.

Categories

Resources