semi-bricked droid 2. MEM_MAP BLANK - Droid 2 General

Hey guys i got a Drodi 2, NON GLOBAL.
It is stuck in download mode only!
I tried to use RSD Lite and load 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf\1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf in it but it gives me an error
at the end it says "error in switching to BP pass through mode"
then it botos back up and gives me
Bootloader
D2.37
Err:A5,70,70,00,00
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
can somone point me in the right direction?

eric303 said:
Hey guys i got a Drodi 2, NON GLOBAL.
It is stuck in download mode only!
I tried to use RSD Lite and load 1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf\1FF-p2a_droid2_cdma_droid2-user-2.3.3-4.5.1_57_DR2-31-110719-release-keys-signed-Verizon-US.sbf in it but it gives me an error
at the end it says "error in switching to BP pass through mode"
then it botos back up and gives me
Bootloader
D2.37
Err:A5,70,70,00,00
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
can somone point me in the right direction?
Click to expand...
Click to collapse
Try downloading this http://forum.xda-developers.com/showthread.php?t=1662091 = 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf.gz

supergear said:
Try downloading this http://forum.xda-developers.com/showthread.php?t=1662091 = 1FF-p2a_droid2_cdma_droid2-user-2.3.4-4.5.1_57_DR4-51-120117-release-keys-signed-Verizon-US.sbf.gz
Click to expand...
Click to collapse
Tried that and now when it boots up it just gives me
Bootloader
D2.37
It auto boots into download mode. any other advice? I tried to do a wipe/data reset and when i hit reboot, takes me to
Bootloader
D2.37

did you get bp switching error again? read http://droid.koumakan.jp/wiki/Welcome
try redownloading sbf
what version of rsd lite are you using?
Sent from my DROID2 using xda app-developers app

tried the SBF twice on 2 different computers, same result. No but it did say fail. Then it only lets me turn it on to
Bootloader
D2.37

eric303 said:
tried the SBF twice on 2 different computers, same result. No but it did say fail. Then it only lets me turn it on to
Bootloader
D2.37
Click to expand...
Click to collapse
Which version of RSD Lite are you using? version 5.6 works for me

supergear said:
Which version of RSD Lite are you using? version 5.6 works for me
Click to expand...
Click to collapse
i'm using 5.0 I'll give 5.6 a shot

Tried it on RSD 5.6. I get error failed in switching phone to BP pass through mode. (0x70BE)
plz help

read http://droid.koumakan.jp/wiki/SBF
Note: Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly. In such case, the flashing process will abort, and your phone won't be able to boot normally. RSDLite shows the following error message:
Error switching phone to BP Pass through mode
To get around this issue, once you get a Device driver could not be installed message from Windows, don't close RSDLite nor power off the phone. Start Motorola Driver Installer once again, and let it finish. Then if RSDLite didn't timeout yet, head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally. If RSDLite timed out and you got an error from it, just repeat the SBF process. The driver should now be present, and the flashing process will finish normally.
Once the flashing process is complete, RSDLite will tell you to “power the phone up manually”. In most cases you won't be able to do this straight as instructed: the phone will be bootlooping. Take the battery out, and then place it back in. Press the lock/power button: the phone should boot normally.
Close RSDLite. Disregard the warning about flashing not being completed since your phone has already booted into Android.
In case you still get bootloops after pulling the battery, refer to Android Recovery.
Click to expand...
Click to collapse
---------- Post added at 06:58 PM ---------- Previous post was at 06:43 PM ----------
or just use ezSBF
no drivers needed
http://www.droidforums.net/forum/droid-2-hacks/161849-tool-ezsbf.html

Related

Need Some SERIOUS Help PLEASE!

I was messing with the phone trying to do stuff and long story short I cannot boot up for nothing! Here's what I get:
- I turn it on, and all it says is:
FAILED TO BOOT 1
STARTING RSD MODE
Everything else is BLACK SCREEN
What I have tried so far.
Used rsd lite 4.9 and installed the SBF FILE:
OLYFR_U4_1.2.6_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
It reads and tries to flash but the atrix reboots on the SAME screen mentioned above. And the RSD on my PC says FAILED FLASHING PROCESS!
What more can I do guys/girls?
Is it bricked? Whoever shows me how to get it running I will gladly paypal you some money for your time. Thanks!
JasjarMan said:
I was messing with the phone trying to do stuff and long story short I cannot boot up for nothing! Here's what I get:
- I turn it on, and all it says is:
FAILED TO BOOT 1
STARTING RSD MODE
Everything else is BLACK SCREEN
What I have tried so far.
Used rsd lite 4.9 and installed the SBF FILE:
OLYFR_U4_1.2.6_SIGNED_OLPSATTSPE_P012_HWolympus_1g_1FF.sbf
It reads and tries to flash but the atrix reboots on the SAME screen mentioned above. And the RSD on my PC says FAILED FLASHING PROCESS!
What more can I do guys/girls?
Click to expand...
Click to collapse
You could start by removing external sdcard if you have one in there then try RSD flash back to 1.2.6.
CyberPunk7t9 said:
You could start by removing external sdcard if you have one in there then try RSD flash back to 1.2.6.
Click to expand...
Click to collapse
Removed it and the sim card.
Just downloaded RSD LITE 5.0 and it worked.
thanks cyberpunk for responding!
Should maybe not be in the dev forums???
sigh... This is why companies are making it harder to root.
Moved to proper forum.

R2D2 - Bootlooping, SBF failed 0x70BE

Hey there!
My beloved Droid R2D2 seems to be ailing in the form of being bricked. Nothing happened to it, it just decided that today (really three days ago) was a good day to get stuck in Bootloader on infinite loop. The battery is fully charged, whenever I turn on the phone it goes to:
Bootloader
D2.37
Battery OK
OK to Program
Connect USB
Data Cable
I can get into both Recovery and Bootloader the normal way (I've tried wiping my cache and setting it back to factory settings already) but can't seem to get to anything else.
I tried SBFing it using RSDLite v5.6 with the most recent drivers installed and the SBF file from the lovely droid developers site (specifically the 2.3.4 version). It gets to 100%, the phone restarts, but then I'm presented with the message:
Error switching phone to BP Pass through mode (0x70BE); phone connected
and a big FAIL in the Result box.
I've been looking all over for solutions so I wouldn't have to post this, but it seems everyone else has errors or corrupted codes with their bootloader, whereas mine seems to think it's okay.
I absolutely adore this phone and am by no means ready to give it up (they've even stopped producing them so any new phone would have to be a plain old regular Droid2...), so any help would be unbelievably appreciated!
http://droid.koumakan.jp/wiki/SBF
Note: Under certain circumstances (especially when using Windows Vista and Windows 7) there might be a problem with not all device drivers being installed correctly. In such case, the flashing process will abort, and your phone won't be able to boot normally. RSDLite shows the following error message:
Error switching phone to BP Pass through mode
To get around this issue, once you get a Device driver could not be installed message from Windows, don't close RSDLite nor power off the phone. Start Motorola Driver Installer once again, and let it finish. Then if RSDLite didn't timeout yet, head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally. If RSDLite timed out and you got an error from it, just repeat the SBF process. The driver should now be present, and the flashing process will finish normally.
Once the flashing process is complete, RSDLite will tell you to “power the phone up manually”. In most cases you won't be able to do this straight as instructed: the phone will be bootlooping. Take the battery out, and then place it back in. Press the lock/power button: the phone should boot normally.
Close RSDLite. Disregard the warning about flashing not being completed since your phone has already booted into Android.
In case you still get bootloops after pulling the battery, refer to Android Recovery.
Click to expand...
Click to collapse
if you still no luck, to ezSBF
http://www.droidforums.net/forum/droid-2-hacks/161849-tool-ezsbf.html
Ah! ezSBF worked! This is both wonderful and unfortunate (I ordered a droid 4 to replace my phone deciding it really was dead so now I have to figure out whether to switch to the 4 or send it back for a few more months in the hopes that its price goes down a bit more...) but mostly really good to see old R2 alive and well again. Thanks!
ezsbf has helped a lot of people
Sent from my MB870 using xda premium
so i have a questions. i got mine rooted and deleted something i shouldnt have deleted. so i sbf back to stock. its says that the flash was successful but my r2d2 keeps bootlooping. any ideas
Which sbf did you flash?
Sent from my DROID2 using Tapatalk 2
did you try wiping cache or data?
delete this
jwagman1 said:
delete this
Click to expand...
Click to collapse
you decide to to read the thread? like 4 posts up

motorola defy+ fully brick. HELP

my motorola defy+(mb 526) is totally bricked... it not even show the boot loader and it also not detected rsd lite. i try to flush my phone by JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf .
but still its not working... please help me out.............................:crying:
souviktherocker said:
my motorola defy+(mb 526) is totally bricked... it not even show the boot loader and it also not detected rsd lite. i try to flush my phone by JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.sbf .
but still its not working... please help me out.............................:crying:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1894069
thekguy said:
http://forum.xda-developers.com/showthread.php?t=1894069
Click to expand...
Click to collapse
Thanks for the link but it still not fully working. now rsd lite detect the phone but when i start flashing it shows it executeing and on phone screen shows " SW Update" and "In progress". after that when it shows rebooting its actually not rebooting and it turn back in a black screen....
try to wipe data/cache in stock recovery
souviktherocker said:
Thanks for the link but it still not fully working. now rsd lite detect the phone but when i start flashing it shows it executeing and on phone screen shows " SW Update" and "In progress". after that when it shows rebooting its actually not rebooting and it turn back in a black screen....
Click to expand...
Click to collapse
use this.
http://forum.xda-developers.com/showthread.php?t=1595013
HELP ME i am stuck
I am using ,Motorola defy+ mb526
OS 2.3.6 ginger bread. i have rooted my phone and did some experiments, finally stuck with moto logo 'M'.
i have rsd lite 6.1.6, Motorola device manager, Motorola mobile drivers, some sbf files from the link u specified.But still suck after flashing.
at the end of flashing rsd lite showing "failed".Boot version is 9.10 and its showing "OK" for everything
please rescue my phone, i love it sooooooooooooooo much

[Q] (Q)Razr m Rsd Lite problems....

Hi guys, im an idiot and my razr m is stuck at the very end of the stock boot animation. so i have downloaded the fastboot files, put my phone in fastboot mode, but every time i hit "start" on RSD it says, "the phone failed to switch to fastboot mode"
what do i do? thanks so much
ok.........
straw5254 said:
Hi guys, im an idiot and my razr m is stuck at the very end of the stock boot animation. so i have downloaded the fastboot files, put my phone in fastboot mode, but every time i hit "start" on RSD it says, "the phone failed to switch to fastboot mode"
what do i do? thanks so much
Click to expand...
Click to collapse
so i figured out i was using x64, so i went to my desktop, tried the same process. now it is saying, "failed flashing process unknown boot command"(getvar)
any suggestions would be great folks, im pretty new to this, did have a droidx and successfully flashed rsd lite years ago.
Thanks!
straw5254 said:
so i figured out i was using x64, so i went to my desktop, tried the same process. now it is saying, "failed flashing process unknown boot command"(getvar)
any suggestions would be great folks, im pretty new to this, did have a droidx and successfully flashed rsd lite years ago.
Thanks!
Click to expand...
Click to collapse
Are you using the latest version of RSDlite (6.1.4)?
I was trying to work on the Razr M with an old ver of RSDlite and it does not work.
straw5254 said:
so i figured out i was using x64, so i went to my desktop, tried the same process. now it is saying, "failed flashing process unknown boot command"(getvar)
any suggestions would be great folks, im pretty new to this, did have a droidx and successfully flashed rsd lite years ago.
Thanks!
Click to expand...
Click to collapse
you need to remove any lines containing "var" "GetVar" or "oem" from the xml file and boot your phone into fastboot mode by holding all buttons

Cannot complete SBF flash, recovery flash fails

I'm attempting to repair a bricked DX. Bootloader is 30.04. It apparently had the 621 update, and of course, that's the only SBF that flashes.
However, in RSD Lite, across several versions, it fails at "Switching to BP Pass through" I've tried on windows 8, as well as a VM for windows 7. Moto device manager has been left in charge of the drivers. I've even tried XP 32-bit in virtualbox
sbf_flash on linux doesn't touch the BP to my knowledge, so even though it says it successfullyl flashes, I go right back to bootloader.
In recovery, trying to flash the 621 Verizon Blur zip fails after "updating BP", with a status 0 error message for "cannot open /tmp/sideload/package.zip" or something to that effect. Recovery is stock.
Yup, I've tried flashing from 621 to 604 with no luck. Can't flash the 604-to-621 package because it's stock recovery and I'm right back at the bootloader anyways. Yes I've factory reset after flashing sbf/recovery, etc, with no luck
Sooooooo, is this thing hard bricked?
tonglebeak said:
I'm attempting to repair a bricked DX. Bootloader is 30.04. It apparently had the 621 update, and of course, that's the only SBF that flashes.
However, in RSD Lite, across several versions, it fails at "Switching to BP Pass through" I've tried on windows 8, as well as a VM for windows 7. Moto device manager has been left in charge of the drivers. I've even tried XP 32-bit in virtualbox
sbf_flash on linux doesn't touch the BP to my knowledge, so even though it says it successfullyl flashes, I go right back to bootloader.
In recovery, trying to flash the 621 Verizon Blur zip fails after "updating BP", with a status 0 error message for "cannot open /tmp/sideload/package.zip" or something to that effect. Recovery is stock.
Yup, I've tried flashing from 621 to 604 with no luck. Can't flash the 604-to-621 package because it's stock recovery and I'm right back at the bootloader anyways. Yes I've factory reset after flashing sbf/recovery, etc, with no luck
Sooooooo, is this thing hard bricked?
Click to expand...
Click to collapse
It's been a while, but I remember having problems getting the process to work in Windows 7. I had to find an old Windows XP machine and it worked for me.
It may be worth trying to find a physical XP machine.
try the 621 ezSBF
DX (MB810) ezSBF & Root 2.3.4/4.5.621
Sent from my Amazon Kindle Fire using Tapatalk 2
sd_shadow said:
try the 621 ezSBF
DX (MB810) ezSBF & Root 2.3.4/4.5.621
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
When sbf_flash had no visible effects on my gentoo machine, I ran this iso in a VM and it still did not work. I'm thinking this is a hardware issue at this point. Updating BP fails from recovery's zip, and rsd lite fails at bp-passthrough mode no matter what I do, so it really looks like a hardware problem to me. I'm not sure what a physical xp machine will do that a vm couldn't.
usually the "Switching to BP Pass through" error, is a windows driver error, not a phone hardware failure
but it can be a hardware failure
also which version of rsd lite tried 6.1.4
one way to check driver, right after you see Switching to BP Pass through, open windows device manager and look for
an unknown device or a yellow triangle in of a device, fix a bad/missing driver can be a little tricky
Start Motorola Driver Installer once again, and let it finish. Then ... head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally.
or
burn the ezSBF iso file to a cd or usb, and boot pc from ezSBF boot disc, vm is not the same thing as the real thing, vm does not always work
In recovery, trying to flash the 621 Verizon Blur zip fails after "updating BP", with a status 0 error message for "cannot open /tmp/sideload/package.zip"
Click to expand...
Click to collapse
moto updates only update, unlike some other android devices, the update only works if the older software is installed, and verified completely stock
sd_shadow said:
usually the "Switching to BP Pass through" error, is a windows driver error, not a phone hardware failure
but it can be a hardware failure
also which version of rsd lite tried 6.1.4
one way to check driver, right after you see Switching to BP Pass through, open windows device manager and look for
an unknown device or a yellow triangle in of a device, fix a bad/missing driver can be a little tricky
Start Motorola Driver Installer once again, and let it finish. Then ... head to Device Manager, find the Unknown device, and in its properties' Driver tab click Update driver…. It should now install normally.
or
burn the ezSBF iso file to a cd or usb, and boot pc from ezSBF boot disc, vm is not the same thing as the real thing, vm does not always work
moto updates only update, unlike some other android devices, the update only works if the older software is installed, and verified completely stock
Click to expand...
Click to collapse
I've tried 4.7, 4.8, 5.7...regarding the device manager thing, I have never had to worry about an unknown device in dev manager. It always showed
"Motorola Flash Interface." during the bp passthrough. I've even gone as far as changing the driver to "Motorola BP Flash", etc during and before the flash with no change in results.
With the .zip update, it gets past the "verifying system" portion. It verifies, patches boot files, patches system files, then when it hits updating BP, it fails. If I decide to play with this again I will take a picture of the recovery screen.
Is there a cwm sbf available so I can at least get adb
tonglebeak said:
Is there a cwm sbf available so I can at least get adb
Click to expand...
Click to collapse
no there is not, because of the locked bootloader, the only way to access CWM is with a bootstrap app, which creates a boot hijack.
linxi
help you

Categories

Resources