Hi there, I've updated to the latest Synaptics driver. Initially, only the top swipe works. The left edge swipe works after applying the registry fix as stated in Ndaoud360's thread. But my right edge swipe still doesn't work. Hmmm.. is there any registry fix for this as well?
Related
Hello there, Im having a weird issue with PIE, whether it's SLIMpie, PA's PIE or even LMT Launcher's PIE controls - I usually set my PIE trigger area at the Bottom, when triggering it it doesn't really work perfectly unless I trigger it from the very left side of the bottom of my screen, it doesn't really work well at the center and right bottom of it - Unless I set the trigger area as MAXIMUM.
If I set the default settings but on the Right or Left area, it works perfectly, is it a problem with my screen ?
And NO, I dont like the area to be maximumly triggered since it conflicts a little bit with the Launcher's dock, where it becomes a little slacky
Ensifolk said:
Hello there, Im having a weird issue with PIE, whether it's SLIMpie, PA's PIE or even LMT Launcher's PIE controls - I usually set my PIE trigger area at the Bottom, when triggering it it doesn't really work perfectly unless I trigger it from the very left side of the bottom of my screen, it doesn't really work well at the center and right bottom of it - Unless I set the trigger area as MAXIMUM.
If I set the default settings but on the Right or Left area, it works perfectly, is it a problem with my screen ?
And NO, I dont like the area to be maximumly triggered since it conflicts a little bit with the Launcher's dock, where it becomes a little slacky
Click to expand...
Click to collapse
Just because bottom part screen has the GOOGLE SEARCH. I mean when you slide your finger upwards from bottom of the screen the GOOGLE SEARCH ring appears..
Also check this. I am on Slim ROM,
the trigger gravity should be 75%
trigger thickness should be 40%
This settings is what I use and all working fine here.
Rohit02 said:
Just because bottom part screen has the GOOGLE SEARCH. I mean when you slide your finger upwards from bottom of the screen the GOOGLE SEARCH ring appears..
Also check this. I am on Slim ROM,
the trigger gravity should be 75%
trigger thickness should be 40%
This settings is what I use and all working fine here.
Click to expand...
Click to collapse
But the navigation bar is not even there i have totally disables it...pie works fine id i trigger deom left bottom...but if i try from center or right bottom...it doesnt show...unless i set trigger area to maximum...weirdest **** ever !
Sent from my Nexus 4 using xda app-developers app
Works fine for me.
It could be an issue with the digitizer on your touch screen.
Test:
Load the app "dev tools" and click on pointer location
Note that if activating pie it doesn't show the pointer tail so start in the center of the screen.
Drag from the center down to the bottom and drag it across the bottom end of the screen to make sure that you are actually getting touch detection at the bottom.
Sent from my Nexus 4 using xda app-developers app
I flashed PAC onto my Galaxy Note 10.1 just a few days ago when I ran across the PIE section in the settings, as I started toying with it I fell in love with how the nav bar was no longer hanging around the bottom all of the time, and I certainly liked PIE's interface better. However, ever since I started using the bottom 1/2 inch (interestingly about the size of the nav bar) hasn't been responsive to any touch input other than PIE. For example, if I was typing something, only the top of the spacebar would recognize a touch as a space, but the other, bottommost part would still operate if I swiped up to reveal PIE.
Is anyone aware of a fix to this problem, or is it just a tradeoff of having PIE, and this is just the way it is?
--John Galt from my GT-N8013
You can disable pie from the settings menu. You should also consider upgrading to 4.4 as JB is no longer receiving updates.
Well I know that I can disable PIE, but I want to know if the bottom of the screen not being functional is just something I have to deal with or if there is something that I can do about it.
I'm not aware of a 4.4 update for PAC for my device. I'm willing to try a nightly release, but I'm not sure how to tell what version a ROM is from the name of the .zip.
For example, what version is: pac_n8013-nightly-20140122.zip ? I can't anything except for "pac", "n8013" (my model no.), "nightly", and "2014".
The "0122" I'm not sure of.
Galt42 said:
Well I know that I can disable PIE, but I want to know if the bottom of the screen not being functional is just something I have to deal with or if there is something that I can do about it.
I'm not aware of a 4.4 update for PAC for my device. I'm willing to try a nightly release, but I'm not sure how to tell what version a ROM is from the name of the .zip.
For example, what version is: pac_n8013-nightly-20140122.zip ? I can't anything except for "pac", "n8013" (my model no.), "nightly", and "2014".
The "0122" I'm not sure of.
Click to expand...
Click to collapse
You can move the pie trigger to the side of the screen to see if you get the full touch screen back...
0122 is the date of the nightly build. Up to 0128 is 4.3 and from 0303 will be PAC-4.4
Sent from my ST18i using Tapatalk
Thank you for the clarification. I could be missing something, but there are no ROMs that have any release after 0128 (which I have now) for my device.
Seems like I'll have to wait for an update to roll around, but until then I'll keep playing with the settings and see if perhaps I have something not set properly.
Sent from my GT-N8013
Hybrid Properties
As I was thinking about the correlation between this problem and the nav bar, I realized that the nav bar was likely still active, but not visible because I clicked on the PIE fullscreen button in the quick settings. So I went to Hybrid Properties, clicked on interface, and set the "Nav. bar" slider to 0%, and clicked Apply. When that didn't work, I went back to that screen and found that the Nav. bar slider was all the way back at 100%. I've tried several times to get this to work, including adjusting the "Size" slider, clicking "Tablet UI" in the Launch screen and applying that, but nothing has stopped that slider from returning to it's default setting. Anyone know why this might be?
I only tried to use this feature on my S5 a couple times, but my wife would like to use this feature on her new N4. I find that starting the One-handed operation function on both the S5 and N4 using the touchscreen gesture described in the enabling setting screen rarely works. It takes a bunch of swipes before the reduced One-handed screen appears.Very annoying and defeats the purpose of the feature as you actually have to try to enable it using two hands. I didn't even try to master using this feature given that it's so hard to get it started. I thought it was an issue with my S5, but after trying it on the N4... I had the same results. Is there a shortcut to enable this feature other than that the swiping gesture? Anyone else experiencing this issue?
Im sure you dont swipe correctly, for me it work all the time, just swipe your finger from screen edge to the middle then back to the screen edge with a horizontal way! Its not a V-like swipe, its like a hohorizontal "I" swipe just try it until you get it working!
Good luck!
midi_1996 said:
Im sure you dont swipe correctly, for me it work all the time, just swipe your finger from screen edge to the middle then back to the screen edge with a horizontal way! Its not a V-like swipe, its like a hohorizontal "I" swipe just try it until you get it working!
Good luck!
Click to expand...
Click to collapse
Yes, I'm swiping correctly, but it's not very reliable it works only 1 out of 6 or 7 times. I have a wallpaper with a straight line down the middle and I swipe over that straight line to the middle of the screen from the edge of the screen and back. Of course in a horizontal I. It would be nice if this feature had a toggle in the top bar pull down to turn it on/off. I'm hoping a Xposed Module developer notices this deficiency and comes up with a module with shortcut solution.
You have to start at edge of screen then finish at edge of screen, which can be a problem if you have a case. Doesn't hurt to actually go past the center either.
I can do it pretty consistently, and the times I fail I know it's because I hit the rim on the case and didn't swipe all the way to edge.
Ok this is a little hard to explain, but in using my 6p (stock) now for a few days, when I swipe in from the right edge it doesn't seem to work, as well or at all. I use Action Launcher 3 and one of the perks is quickpage, which is activated via swipe in from the right edge. I can get it to work if I don't swipe in from off the screen, but click just a hair in from the edge. The left edge swipe in works fine.
I thought maybe it was the app but Facebook appears to be the same, when trying to swipe between feeds, requests, etc.
I even tried the google launcher with multiple pages it doesn't handle the swipe in from off the edge well either.
So is it just my phone or can others duplicate my findings? I just want to see if it is just me or not.
thanks
cd23murray said:
Ok this is a little hard to explain, but in using my 6p (stock) now for a few days, when I swipe in from the right edge it doesn't seem to work, as well or at all. I use Action Launcher 3 and one of the perks is quickpage, which is activated via swipe in from the right edge. I can get it to work if I don't swipe in from off the screen, but click just a hair in from the edge. The left edge swipe in works fine.
I thought maybe it was the app but Facebook appears to be the same, when trying to swipe between feeds, requests, etc.
I even tried the google launcher with multiple pages it doesn't handle the swipe in from off the edge well either.
So is it just my phone or can others duplicate my findings? I just want to see if it is just me or not.
thanks
Click to expand...
Click to collapse
I've got no issues with mine at all, I'm using Action Launcher 3 and mine works perfectly. I'm afraid you might have a defective unit
You could always try a factory reset- you never know.
thanks any others please let me your thoughts too
Hi guys, i bought galaxy s8 yesterday. I have a problem with palm swipe to capture a screenshot feature that it never works for me. I have the latest firmware available. Did anyone have the same problem?
I think the 'palm swipe' is improperly named. Swiping my palm flat against the screen accomplishes nothing. After disabling and re-enabling the 'palm swipe' in settings a graphic popped up showing the correct method which is not really a 'palm swipe' at all. It is a hand edge swipe, i.e. with your palm at 90° to the screen.