[Q] Where I can get official SBF & nandroid for it - Defy Q&A, Help & Troubleshooting

Need 2.51 DACH nandroid backup and the same 2.51 Fixed SBF. Where I can get nandroid, links in forums seem all dead?

olaviivalo said:
Need 2.51 DACH nandroid backup and the same 2.51 Fixed SBF. Where I can get nandroid, links in forums seem all dead?
Click to expand...
Click to collapse
If you can't find a nandroid then you should be about to find the SBF here ----> http://forum.xda-developers.com/showthread.php?t=966537

Kayant said:
If you can't find a nandroid then you should be about to find the SBF here ----> http://forum.xda-developers.com/showthread.php?t=966537
Click to expand...
Click to collapse
No problem with original SBF's but unable to find fixed SBF and nandroid to specific release. All links in this thread forward to DACH are just dead.

Related

[Q] Think i killed my defy by flashing Defy+ sbf..Help me!

Hi
i was on cm 7.2 nightly with the old kernel...i then wanted to flash blur 2.3.6 Defy+ full sbf cause i dont wanna downgrade anymore....but now i am screwed...
after flashing i get Bootloader screen again...showing
09.10
Err: A5,69,35,00,27
Batt Ok
Ok to program
Transfermode
USB
I tried the steps in the dev section with flashing a special sbf with cg 5 in it but hat didnt work either... all i get now is a phone thats boots in bootlaoder and shows error message... no way to get into recovery mode...
I know it was stupid not to flash a clean 2.2 before doing this...
Please is there anything that can be done or is my phone gone for good...
Trying older sbf dont work either...just black screen....
have you tried flashing special eclair sbf full
try this method may help
http://forum.xda-developers.com/showthread.php?t=1152377
yes i tried that but not working since the CG version is 6 on the 2.3.6 sbf....
BUT guess what...sice i had nothing to loose...is just tried another 2.3.6. sbf and this ones WORKS....
YESSSS!!!! So damn relieved...Phewww close one.....
Just flashed 4.5.1-134-DFP-132-O2-Germany full Blur this one over the one that gave me the error and it WORKS....
Can be closed.....
ace-drink said:
yes i tried that but not working since the CG version is 6 on the 2.3.6 sbf....
BUT guess what...sice i had nothing to loose...is just tried another 2.3.6. sbf and this ones WORKS....
YESSSS!!!! So damn relieved...Phewww close one.....
Just flashed 4.5.1-134-DFP-132-O2-Germany full Blur this one over the one that gave me the error and it WORKS....
Can be closed.....
Click to expand...
Click to collapse
Probably the one you tried was just corrupted hehe, good to see you got it sorted.
And yeah, the special Eclair SBF wont work since all these new Defy+ Roms come with CG6, and that one is CG5.
ace-drink said:
Hi
i was on cm 7.2 nightly with the old kernel...i then wanted to flash blur 2.3.6 Defy+ full sbf cause i dont wanna downgrade anymore....but now i am screwed...
Click to expand...
Click to collapse
Hi, ace, I had a 2.3.6 Defy+ and got screwed too, by flashing a 2.3.4 custom ROM without being aware of the locked bootloader / no-downgrade lock.
Please, where did you find stock ROM / sbf file for 2.3.6 Defy+ ? I need it but can't find it
EDIT: nvm. I found it myself =)
Hi guys, apologies for flooding other threads as well
I'm having the same error on bootloader. i've tried flashing several Stock SBF files from http://sbf.droid-developers.org/umts_jordanplus/list.php but still stucked on the same error in bootloader. Please help
extremeoverlord said:
Hi guys, apologies for flooding other threads as well
I'm having the same error on bootloader. i've tried flashing several Stock SBF files from http://sbf.droid-developers.org/umts_jordanplus/list.php but still stucked on the same error in bootloader. Please help
Click to expand...
Click to collapse
try flashing this bl7 firmware to your defy
http://sbf.droid-developers.org/umts_jordanplus/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
make sure your battery is charged.[>70%]
deepak251146 said:
try flashing this bl7 firmware to your defy
http://sbf.droid-developers.org/umts_jordanplus/DEFYPLUS_U3_4.5.1-134_DFP-231_CN_SIGN_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P015_A030_Service1FF.sbf.gz
make sure your battery is charged.[>70%]
Click to expand...
Click to collapse
Hi, I still have the same error
Questions go in the Q&A section
Look at aces kernel version...it must be the most latest sbf he had flashed..
Sent from my MB526 using Tapatalk 2

[Q]Kernel needed to restore Gingerbread nandroid backup

I have a nandroid backup of my Stock firmware which was 2.3.6
But two days ago, I flashed to Froyo using RSDLite so I could install MIUI
But even the pikachu edition didn't fix the battery bug so I decided to revert back to my nandroid backup but the phone wouldn't boot (which im guessing is because the phone was then on froyo kernel)
So I downloaded a gingerbread SBF from one of the threads here and flashed using RSDlite, and which turned out to be 2.3.4. This is giving me a lot of bugs(most of the apps don't open after few hours of usage). I still have my nandroid backup of my stock 2.3.6 ROM
So my question is:
Can I change my kernel to 2.3.6's version and restore my original nandroid backup?? If so can anyone please link me to the proper kernel
Thanks!
Try the Kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1494231
Thanks, but right now im on 2.3.4. So should i flash this kernel?
kadavil said:
Thanks, but right now im on 2.3.4. So should i flash this kernel?
Click to expand...
Click to collapse
Should be fine. I flashed 2.3.4 kernel from ms2ginger 2.1 and i can use 4.5.1-134DFP188 just fine.
kadavil said:
I have a nandroid backup of my Stock firmware which was 2.3.6
But two days ago, I flashed to Froyo using RSDLite so I could install MIUI
But even the pikachu edition didn't fix the battery bug so I decided to revert back to my nandroid backup but the phone wouldn't boot (which im guessing is because the phone was then on froyo kernel)
So I downloaded a gingerbread SBF from one of the threads here and flashed using RSDlite, and which turned out to be 2.3.4. This is giving me a lot of bugs(most of the apps don't open after few hours of usage). I still have my nandroid backup of my stock 2.3.6 ROM
So my question is:
Can I change my kernel to 2.3.6's version and restore my original nandroid backup?? If so can anyone please link me to the proper kernel
Thanks!
Click to expand...
Click to collapse
Can u pls give me the link of the 2.3.4 GB sbf from where u downloaded.
jackajay said:
Can u pls give me the link of the 2.3.4 GB sbf from where u downloaded.
Click to expand...
Click to collapse
Downloaded from here:
http://forum.xda-developers.com/showthread.php?t=1421526
Pzyduck said:
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz
DOWNLOAD
Click to expand...
Click to collapse
You can try doing a full wipe before restore nandroid.
kadavil said:
Downloaded from here:
http://forum.xda-developers.com/showthread.php?t=1421526
Click to expand...
Click to collapse
Are you sure that is 2.3.4??!! Its 2.3.6!!!! BL6.. DFP-1321 is 2.3.6. Did you do a data wipe from stock before or after full SBF flash?
I did wipe and then flashed.. it was 2.3.4 in system info
Sent from my MB526 using XDA

How to install a fixed sbf?

I try to install nordic froyo fixed sbf and after i flash it i stuck on motorola logo and it bootloops everytime
Can somebody help me please ?
If somebody have a sfr nandroid (froyo) pm me please
Did you flash the nandroid backup just after having flashed the SBF?if it's not enough,flash a full sbf
No
Sent from my MB525 using Tapatalk
Install the nandroid backup for that version,it should be enough

[Q] How to get back to stock rom from a-ics

Can someone explain me how to get back to stock rom from aurora ics?
I have nandroid backups but my recovery doesnt boot.
Jorkki said:
Can someone explain me how to get back to stock rom from aurora ics?
I have nandroid backups but my recovery doesnt boot.
Click to expand...
Click to collapse
Download a stock ROM from our backup here: http://qrac.zapto.org/Stock_ROMs/
"U8800 V100R001C00B138SP04%28Normal%29.rar" is Android 2.2 Froyo
"U8800V100R001C00B518G001 (Beta1.0)(Overseas Normal)(Gingerbread).zip" is Android 2.3.5 Gingerbread beta.
You will find the installation instructions inside the .zip or .rar file.
(I'm guessing you have made those Nandroid backups using an old CWM version.)
Tonttunator said:
Download a stock ROM from our backup here: h t t p://qrac.zapto.org/Stock_ROMs
"U8800 V100R001C00B138SP04%28Normal%29.rar" is Android 2.2 Froyo
"U8800V100R001C00B518G001 (Beta1.0)(Overseas Normal)(Gingerbread).zip" is Android 2.3.5 Gingerbread beta.
You will find the installation instructions inside the .zip or .rar file.
(I'm guessing you have made those Nandroid backups using an old CWM version.)
Click to expand...
Click to collapse
Thank you for your answer! I have to try that when i get home.
Thanks!
Toweeka sky's
Jorkki said:
Can someone explain me how to get back to stock rom from aurora ics?
I have nandroid backups but my recovery doesnt boot.
Click to expand...
Click to collapse
1+

Nandroid backup

Hello guys!
I have a huge problem, and I need a nandroid backup to defy (normal), someone can kindly do this backup and upload here to me.
Please, tell me wich SBF`s version you used to flash your phone, I want to flash with the same version.
thanks :laugh:
fixed SBF https://www.dropbox.com/s/98jco9btls1nl0y/3.4.2-177-5_Fixed.NORDIC_DEBLUR.sbf
.ZIP https://www.dropbox.com/s/0giqf46fdcx64zc/3.4.2-177-5_Nand.NORDIC_DEBLUR.zip
:good: this fixed SBF is rooted and deblured :good:
lexer98 said:
fixed SBF https://www.dropbox.com/s/98jco9btls1nl0y/3.4.2-177-5_Fixed.NORDIC_DEBLUR.sbf
.ZIP https://www.dropbox.com/s/0giqf46fdcx64zc/3.4.2-177-5_Nand.NORDIC_DEBLUR.zip
:good: this fixed SBF is rooted and deblured :good:
Click to expand...
Click to collapse
Hey dude!
Thanks for your help!
So, I flashed with your SBF but I get a error, the frist CG that get error is the CG33 and then all of them get error. The Error happen's when the RSD lite is verifying. Do you know what's is happening and what can I repair it?

Categories

Resources