[HELP] Droid X Lock Button / Need To Get Into Bootloader - Droid X General

As stated, I am unrooted, but still have CWM recovery on my phone.
I want to flash the original RUU, so I can send it back to the seller without a trace of it being rooted at all.
I can't get into bootloader using volume down, home, and the power button...because the power button doesn't work.
Is there anything you guys suggest, or is there a way to get into bootloader through ADB or an application?
Thanks,
hazEup

Bump.
Anybody?
No possible way to get into bootloader without the power button?
Just wanna flash this RUU...

pull battery, replace battery
Hold volume up+down buttons , or hold Vol.Down and Camera
connect to wall charger or usb/pc
if phone always boots up when replacing battery
press buttons before replacing battery
---------- Post added at 06:00 PM ---------- Previous post was at 05:58 PM ----------
may need to be usb/pc

I'm in the same boat trying to do a friend's phone. I've tried holding the buttons before putting the battery back in. The screen flashes but stays black for a while and then boots up normally. I'll try with it connected to the PC.

Related

[Q] Recovery without volume up button

I have a Motorola Xoom that I was trying to boot into recovery.
There's a problem, my volume up button is broken. Didnt realize it before so now I'm stuck at the logo with the choice to scroll between RSD, Fastboot or Recovery but cant select any mode.
Is there a way to exit this ? Tried to keep the power button pressed and tried various combiations of vol down and power but no result.
If I let it sit and drain the battery, will it eventually get out of this mode ?
Thanks
-Sam
Plug it into your computer and run adb then type fast boot reboot.
---------- Post added at 08:24 PM ---------- Previous post was at 08:21 PM ----------
Sorry I should be more specific. Download easyadb and unzip it. Plug your Xoom into the computer and open a command prompt in that file with adb in it. Change your Xoom to fast boot protocol support and type fast boot reboot in adb.
---------- Post added at 08:27 PM ---------- Previous post was at 08:24 PM ----------
Actually maybe try to press the volume up button really hard..
Hi,
Thanks for your reply. The problem with connecting to the pc is that adb wont recognize the device. Its because the device is stuck in select mode and not going into either of the RSD/Fastboot/Recovery options.
I can scroll through them but even hard pressing the up button wont work. I dropped it and the button doesnt work.
They are pretty easy to take apart, check out some videos on YouTube, etc and see if you can fix your volume button.
Thanks brandogg, Thats what I was planning to do. Or take it back to a verizon store since its still under warranty I think
Use your idea and let the battery drain..
Letting the battery drain overnight worked.
Thanks

[Q] My LG G2 is is bricked with no download mode and cant get to recovery!

Lg G2 AT&T, The power button and volume down button does not work, when i try to get into download mode it goes to "[2130] Fastboot mode started" . I flashed the wrong rom for my device, usually i can go to recovery but for some reason this time it wont let me. At this point i'm pretty hopeless, I have looked on Google for solutions but you either need recovery or download mode. Please help
Have you tried entering recovery by turning off the phone...pressing power and vol. down...then, while still holding the vol. down, release and press again the power button once the LG logo appears...then release the vol. down button once it asks if u want to factory reset and pressed the power button three times to attempt to enter recovery?
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
Read this entire post and follow VERY carefully if your symptoms sound the same (two different sets of symptoms with different solutions). I was able to bring my phone back without recovery, download mode, etc. However, I did not have the fastboot error. http://forum.xda-developers.com/showthread.php?t=2681089
uiuc08 said:
Have you tried entering recovery by turning off the phone...pressing power and vol. down...then, while still holding the vol. down, release and press again the power button once the LG logo appears...then release the vol. down button once it asks if u want to factory reset and pressed the power button three times to attempt to enter recovery?
---------- Post added at 06:43 PM ---------- Previous post was at 06:36 PM ----------
Read this entire post and follow VERY carefully if your symptoms sound the same (two different sets of symptoms with different solutions). I was able to bring my phone back without recovery, download mode, etc. However, I did not have the fastboot error. http://forum.xda-developers.com/showthread.php?t=2681089
Click to expand...
Click to collapse
I have tried the power button and volume down button. Ill read the thread and try that. I will let you know how it goes
Good luck!!!
uiuc08 said:
Good luck!!!
Click to expand...
Click to collapse
Alright so none of it was working. Linux would not read my phone. I traded in my phone and got a Nexus 6 instead. Thank you for your help!

Force Z1 into Fastboot Mode?

I have a soft bricked Z1. Recovery doesn't work. System doesn't work. Now I cannot find any way to force it into fastboot mode to flash a new, working recovery. Any tips?
power off
than press and hold vol+ and vol-
connect y phone to pc .
Thanks and I tried that, but I can't power it off. It's stuck in a boot loop and when Iong-press the power button, it just restarts
Press and hold until it go black , after 1 reboot .
Gonzaman said:
Press and hold until it go black , after 1 reboot .
Click to expand...
Click to collapse
It just keeps going back into the boot loop . Doesn't remain turned off, but reboots instead.
Than connect cabel wile hold vol+ and vol- you will get in fastboot .
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Hold +- vibro connect .
Gonzaman said:
Than connect cabel wile hold vol+ and vol- you will get in fastboot .
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Hold +- vibro connect .
Click to expand...
Click to collapse
So I followed these steps:
1) Long-press the power button. Phone restarts.
2) While restart, hold +vol and -vol.
3) Immediately after restart, plugin USB cable to computer.
That didn't help. Did I miss anything?
No . than take off the cover and unplug buttery .
Gonzaman said:
No . than take off the cover and unplug buttery .
Click to expand...
Click to collapse
Not sure that's the way –*is there an easy way to remove the cover for the Z1?
Ok, I found a solution and am incredibly grateful to everyone who helped. See http://forum.cyanogenmod.org/topic/...zuk-is-bricked-without-salvation/page__st__20
Can you tell me the solution?
buhshubuh said:
Ok, I found a solution and am incredibly grateful to everyone who helped. See http://forum.cyanogenmod.org/topic/...zuk-is-bricked-without-salvation/page__st__20
Click to expand...
Click to collapse
'
What is the solution?
buhshubuh said:
Ok, I found a solution and am incredibly grateful to everyone who helped. See http://forum.cyanogenmod.org/topic/...zuk-is-bricked-without-salvation/page__st__20
Click to expand...
Click to collapse
this link is not opening
Okay guys so I had the exact same problem just hours ago.
I accidentally flashed a kernel in recovery partition (Ik lol xD)
So here's what i did.
I searched around a lot and didn't find an exact answer. Then i came across something.
If you can, remove the back cover and disconnect the battery and then connect it again.(Look it up on Youtube)
If you can't do so, wait for the battery to fully discharge.
Then, press the vol+ and vol- together and wait for 2-3 secs and then connect your USB cable.
Don't press the power button or you'll just end up in a bootloop.
My phone directly went into fastboot mode.
Hope I Helped.
hold voulme + button and power button , and then continuously press volume - button 10-15 times! it will boot twrp ! i was facing the same issue ! This worked for me!
buhshubuh said:
I have a soft bricked Z1. Recovery doesn't work. System doesn't work. Now I cannot find any way to force it into fastboot mode to flash a new, working recovery. Any tips?
Click to expand...
Click to collapse
Let your phone to discharge to 0% then it would automatically power off. Then press and hold volume up button and connect to pc. And you r there in fastboot.

My p9 lite _-53 its stuck in the huawei logo

hi guys i'm using Huawei P9 Lite VNS-L53
i rooted my phone two days ago and everything was ok, then i left my phone charging and in the morning my phone was turned off and when i tried turning it back on, it got stuck on the huawei logo and i cant get past it.
i had bootloader open, twrp and root
phone doesn't react to my key combinations (power, power+volume up, power+volume up+down vs.. you got it.).
then i cant connect my phone to my pc, it doesnt make any sound when i connect it and my computer doesn't say anything about about my phone being connected.
All my impressions are that's it. how can i fix it? or is it a hard brick or something unrepairable?
sheppir said:
hi guys i'm using Huawei P9 Lite VNS-L53
i rooted my phone two days ago and everything was ok, then i left my phone charging and in the morning my phone was turned off and when i tried turning it back on, it got stuck on the huawei logo and i cant get past it.
i had bootloader open, twrp and root
phone doesn't react to my key combinations (power, power+volume up, power+volume up+down vs.. you got it.).
then i cant connect my phone to my pc, it doesnt make any sound when i connect it and my computer doesn't say anything about about my phone being connected.
All my impressions are that's it. how can i fix it? or is it a hard brick or something unrepairable?
Click to expand...
Click to collapse
Can you get into fastboot?
You have to boot it into fastboot. You can't turn off it now, but you can reboot it. Connect to your pc,press the power button for 10 seconds, it will hard reboot, but when it turn off press the vol - pressing power. You will enter to fastboot.
Now unlock again the bootloader
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
If all success, you can flash the twrp and flash the ROM
Ok, so i have to connect my phone turned off to the pc and then press the power button for 10 seconds? Then the volume down button?
Jinclaudio said:
You have to boot it into fastboot. You can't turn off it now, but you can reboot it. Connect to your pc,press the power button for 10 seconds, it will hard reboot, but when it turn off press the vol - pressing power. You will enter to fastboot.
Now unlock again the bootloader
---------- Post added at 12:48 PM ---------- Previous post was at 12:47 PM ----------
If all success, you can flash the twrp and flash the ROM
Click to expand...
Click to collapse
How do i know if I entered fastboot mode?.
because a tried what you said but it only turns off.
sheppir said:
How do i know if I entered fastboot mode?.
because a tried what you said but it only turns off.
Click to expand...
Click to collapse
You can know because there is a write and a robot icon.
So, try press power + vol - together for 10 seconds.

Cannot access bootloader anymore; phone stuck in boot sequence.

64GB USA XT1575.
Unlocked bootloader. Loaded TWRP 3.1.1.
Loaded AICP 10/8/2017, and OpenGapps mini.
No root; No Magisk.
Functioned fine.
Did dirty upgrade to a November version.
Phone had been glitch since in function, and reboots.
It has deteriorated to reboots and never finishes animation.
I cannot get the phone off, then to bootloader.
If I disconnect battery, wait a few hours, and reconnect:
I cant connect the battery and quickly hold power and vol down and get bootloader.
I get warning Boot loader unlocked screen, then an AICP loading animation that never ends.
If I hold in power button, it reboots to the same scenario.
Even holding in power/vol down during process wont get to bootloader .
What would deteriorate phone into not being able to get into bootloader, but phone is not hard-bricked with no boot at all?
I need to get to TWRP so I can fully wipe this phone and whatever is causing all of this.
Any ideas?
Do we have an unbrick "loader" for the sdcard like the XT1572 folks do?
IDK about the unbrick tool, but I have had a constant boot up, turn the phone off and it quickly reboots again. For me what worked is all about timing! I power the phone off and as soon as the screen powers down I hold power and volume down until bootloader screen! It takes some time to get it right on time, but it's worked for me in the past on my moto x pure edition. I'm stock 7.0 now but the issues occurred running custom roms, so really the same situation. Good luck and hope you get it. And I hope you have a backup to restore once you get into twrp?!?!
"If I hold in power button, it reboots to the same scenario.
Even holding in power/vol down during process wont get to bootloader ."
On bootloop:
Hold power key only, when screen goes black - hold vol- only. It should go to BL screen.
AICP doesn't work at Nougat modem(radio/baseband).
You need to flash MM modem or reflash full Stock Nougat and stay on it.
@hometech99
dzidexx said:
"If I hold in power button, it reboots to the same scenario.
Even holding in power/vol down during process wont get to bootloader ."
On bootloop:
Hold power key only, when screen goes black - hold vol- only. It should go to BL screen.
AICP doesn't work at Nougat modem(radio/baseband).
You need to flash MM modem or reflash full Stock Nougat and stay on it.
@hometech99
Click to expand...
Click to collapse
I never went ota 7.0, root, or Magisk.
On bootloop:
Hold power key only, when screen goes black - hold vol- only. It should go to BL screen.
/It always work, sometimes it's hard to find the right moment - vol-/
Go to twrp, wipe all and restore or flash last good version.
---------- Post added at 06:45 AM ---------- Previous post was at 06:44 AM ----------
@hometech99
Why didn't you ask in aicp thread?
---------- Post added at 06:49 AM ---------- Previous post was at 06:45 AM ----------
Here you wrote that you updated to stock N:
https://forum.xda-developers.com/showpost.php?p=75009801&postcount=129
AICP doesn't work at N modem.
dzidexx said:
On bootloop:
Hold power key only, when screen goes black - hold vol- only. It should go to BL screen.
/It always work, sometimes it's hard to find the right moment - vol-/
Go to twrp, wipe all and restore or flash last good version.
Not working..tried it many times.
---------- Post added at 06:45 AM ---------- Previous post was at 06:44 AM ----------
@hometech99
Why didn't you ask in aicp thread?
This is beyond an AICP problem....it might be caused by AICP, but not getting into bootloader is even lower level problem.
---------- Post added at 06:49 AM ---------- Previous post was at 06:45 AM ----------
Here you wrote that you updated to stock N:
https://forum.xda-developers.com/showpost.php?p=75009801&postcount=129
AICP doesn't work at N modem.
Click to expand...
Click to collapse
I have 3+ of these phones. MY personal one works fine . This is a different unit of mine with this problem that was working fine before.
Fixed--one of the issues (others reported also) with later AICP is cant charge phone. We had that issue with this phone also.
On a hunch, I went to my Moto X Pure graveyard basket, and took out another battery, and put it in.
Viola--I can get into boot loader. The original battery must have deep-cycled so bad, it was dead, and even plugged in, cant get to bootloader.

Categories

Resources