Hi guys, long time reader and first time poster here with a question. I apologize in advance if this has been asked and answered, but I have searched throughout the nook forums and have not found a solution yet to my problem and any help is greatly appreciated.
I have been wanting to use CM10 as my daily driver on my nook for awhile now, however everytime I flash the ROM and get things set up, I run into an issue where the ROM does not consider my SD card to be mounted. I have adjusted the settings to be set to Mass USB Storage as one person suggested in the development thread, I have formatted it numerous times to try to see if that was causing the issue, and so far nothing has worked.
I know that the SD card that is in my nook is good as it shows up in ICS without any problems. Does anyone else have any idea on what I could try to get the SD card to mount properly in CM10?
Thanks again for any help, and many apologies if this is answered in another thread.
Shinryuu said:
Hi guys, long time reader and first time poster here with a question. I apologize in advance if this has been asked and answered, but I have searched throughout the nook forums and have not found a solution yet to my problem and any help is greatly appreciated.
I have been wanting to use CM10 as my daily driver on my nook for awhile now, however everytime I flash the ROM and get things set up, I run into an issue where the ROM does not consider my SD card to be mounted. I have adjusted the settings to be set to Mass USB Storage as one person suggested in the development thread, I have formatted it numerous times to try to see if that was causing the issue, and so far nothing has worked.
I know that the SD card that is in my nook is good as it shows up in ICS without any problems. Does anyone else have any idea on what I could try to get the SD card to mount properly in CM10?
Thanks again for any help, and many apologies if this is answered in another thread.
Click to expand...
Click to collapse
When you say mounted, you mean you cannot see it under storage devices within CM10? It does not show up in your file manager? That USB mass storage setting is just for seeing on your PC when you plug the USB cable in. It has nothing to do with seeing the card in CM10. And you tried formatting several times you said. How did you format it? In the PC with windows? You need to try SDFormatter which is a free windows program on the web. Other users have said that that makes them show up on the Nook. When the nook first starts up, it tries to read the SD and scan it, if it can't, it won't mount it. There could be something very simple wrong with the card that the nook sees and your PC does not.
Sent from my Nook HD+ using Tapatalk
Leap,
I have to apologize, I used the wrong terminology in my original post. It seems that the issue I am having is with the SD card being stuck in RO mode and not being able to write to it from CM10. Anything that I have tried to download via the Play Store fails to install with an error saying that it could not install to USB Storage or SD Card. I have formatted the card via Windows, CWM, and using the SDFormatter program to no avail. I have also tried to fix permissions via CWM and Rom Manager and that has not resulted in resolving the issue that I seem to be having. I love the speed at which CM10 runs, and if I can get the SD Card to be RW it would easily replace the ICS build that I've been using forever now, I just don't know what else I can try to get the card to be RW while running CM10.
Shinryuu said:
Leap,
I have to apologize, I used the wrong terminology in my original post. It seems that the issue I am having is with the SD card being stuck in RO mode and not being able to write to it from CM10. Anything that I have tried to download via the Play Store fails to install with an error saying that it could not install to USB Storage or SD Card. I have formatted the card via Windows, CWM, and using the SDFormatter program to no avail. I have also tried to fix permissions via CWM and Rom Manager and that has not resulted in resolving the issue that I seem to be having. I love the speed at which CM10 runs, and if I can get the SD Card to be RW it would easily replace the ICS build that I've been using forever now, I just don't know what else I can try to get the card to be RW while running CM10.
Click to expand...
Click to collapse
The problem is CM10 is very finicky about the format on the card. If it does not like it, it mounts it read only. Look for SDFormatter on the web and format with that. Should fix it.
Edit, I just reread and said you tried that. That should have fixed it. Do it again but turn off quick format.
Sent from my Nook HD+ using Tapatalk
Leap,
Thank you for all the help you've provided, however it doesn't seem that doing a long format with overwrite in SD Formatter got it to work. I'm going to retreat back to ICS for now.
Shinryuu said:
Leap,
Thank you for all the help you've provided, however it doesn't seem that doing a long format with overwrite in SD Formatter got it to work. I'm going to retreat back to ICS for now.
Click to expand...
Click to collapse
Just a question, after you format the card, do you move any files in it? I had the same exact problem and it must have been a defective file in my titanium backup folder because I had no problem using the same sd when I synch'd titanium via dropbox.
I installed the 19/11 nightly and it is better than anything I ever run on nook. even CM7
Tschumi,
After I finish formatting it via SD Formatter, I place it back into the nook completely blank and reboot the nook. After that, I try to download anything from the play store that requires SD install and it fails to install.
Shinryuu said:
Tschumi,
After I finish formatting it via SD Formatter, I place it back into the nook completely blank and reboot the nook. After that, I try to download anything from the play store that requires SD install and it fails to install.
Click to expand...
Click to collapse
Use ROM Manager and select "Format SD card" which will allow apps to install. Nook will reboot into CWM and begin formatting SD card. Be FOREWARNED! You will lose anything you have stored on the SD card so make a backup and trasnsfer to your PC or somewhere you can later retrieve.
Ok so here's an update on this issue for me. It appears that no matter how many times I used SD Formatter to format my 16Gb micro sd card, it would not be recognized by CM10. I grabbed an old 8Gb micro SD card and threw it in my nook and it worked perfectly, so it appears that there's an underlying issue with the card itself that was causing the problems. Thanks to everyone for the tips and advice on how to fix this issue for me. I appreciate it.
Same issue here
Shinryuu said:
Ok so here's an update on this issue for me. It appears that no matter how many times I used SD Formatter to format my 16Gb micro sd card, it would not be recognized by CM10. I grabbed an old 8Gb micro SD card and threw it in my nook and it worked perfectly, so it appears that there's an underlying issue with the card itself that was causing the problems. Thanks to everyone for the tips and advice on how to fix this issue for me. I appreciate it.
Click to expand...
Click to collapse
I am having the same issue with my 16GB Patriot microSD card. The card is recognized, but always displays as full (26GB used) in the settings menu. I have reformatted numerous times to no avail. I have an old 4GB card in there now with no issues.
danman6126 said:
I am having the same issue with my 16GB Patriot microSD card. The card is recognized, but always displays as full (26GB used) in the settings menu. I have reformatted numerous times to no avail. I have an old 4GB card in there now with no issues.
Click to expand...
Click to collapse
It is that Patriot brand and CM10. CM10 is very finicky about sdcards. If it does not like how one performs, it changes it to read only. You can try formatting the card with SDFormatter, which you can get free on the web. That may help, but it may not.
Sent from my Nook HD+ running CM10.1 on Hybrid SD
Related
Hi - need some help! I have a nook color, and flashed the CM7 (7.0.2) to SD card, using verygreen's instructions. All instalation went OK in NC, but when i put the SD back in the PC to copy the GApps, the PC pops a message saying that I have to format the card to make it usable. Any ideas on how to avoid this, or am i missing something?
u need to partion ext7 of ur sd card...try it through CW....then dl gapps
Hi Kitila thanks for your reply. Could you pls provide some more detail on how to do it? I'm a bit new in all this and am afraid i might mess something up. Thanks!
CM7 on SD Card (Nook Color) - PC asks to format card for GApps
Hi,
I am having this exact same problem. I have tried to search for an answer, but only found this thread. Unfortunately, as a noob, I am also having trouble understanding what the one reply means.
The issue: I am able to put the CM7 on my 16GB sandisk microsd card. I am able to put the nightly on the microsd card. I then can get CM7 to load nicely on my Nook Color. However, when I then remove the sd card from the Nook Color and put it back in the computer in order to install GApps, I get a message telling me that I need to format the SD card. As I understand it, formatting the SD card will erase the CM7.
Can anyone walk me through (or point to a walk though of) a fix for this problem.
Thank you in advance. This is such a valuable resource.
Dan
Try using a USB card reader.
Cheers,
kev
kitila said:
u need to partion ext7 of ur sd card...try it through CW....then dl gapps
Click to expand...
Click to collapse
Use of English would be nice!
Thanks much, Kev. Do you think that's it? Weird. I'll need to pick up a USB reader tomorrow. I'll report back.
Thanks!
Dan
Kev,
That worked. Thanks so much!
For those in the future that are having problems with their computer wanting to format the microsd card every time it is inserted, try using a usb microsd card reader instead of the slot in the computer.
Thanks!
Dan
SD Card Damaged. You may have to reformat
I am running cm7. I have tried MIUI and phiremod. I run the roms off internal memory. My problem is that no matter what i do i get the message. There is nothing wrong with my card. I have tried multiple different cards, all with no luck. Nook reads/writes to the card just fine. Stock software never gave me this error.
Re-formatting in android does not help. I even downloaded the sd format exe and formatted in windows, still no luck.
I guess I am asking if there is anyway to remove the error without removing then re-inserting the sd card. It is really annoying. If anyone else has this issue, please chime in.
Thanks.
My problem is that no matter what i do i get the message.
Click to expand...
Click to collapse
What is the problem and what message do you get?
What is your purpose of using uSD card?
TehPwnd said:
SD Card Damaged. You may have to reformat
I am running cm7. I have tried MIUI and phiremod. I run the roms off internal memory. My problem is that no matter what i do i get the message. There is nothing wrong with my card. I have tried multiple different cards, all with no luck. Nook reads/writes to the card just fine. Stock software never gave me this error.
Re-formatting in android does not help. I even downloaded the sd format exe and formatted in windows, still no luck.
Click to expand...
Click to collapse
Does this happen without a card plugged in? A few months ago, my /emmc partition got corrupted and wouldn't mount, and I got this message. I wasn't using /emmc for anything then, so it took me a while to figure out that it wasn't my uSD after all.
Check Settings/Storage and see which "SD Card" it doesn't like. Android treats /emmc just like an SD card, to the error messages are misleading.
Does this thread match what you see? Maybe somebody can come up with a better repair scheme.
stolenmoment-
You got it! I took my sd card out, then restarted the nook. When I rebooted I still had the same error So I reformatted the card. Turns out it was the emmc after all.
TehPwnd said:
stolenmoment-
You got it! I took my sd card out, then restarted the nook. When I rebooted I still had the same error So I reformatted the card. Turns out it was the emmc after all.
Click to expand...
Click to collapse
Cool! I wonder how it got corrupted in the first place, though. Of course, I had just installed CM7 on the EMMC at that time, so no telling what I might've typed incorrectly.
The other night I got a NC with 3.1 and decided to root it and flash cm7 onto it. This all was going fine until after the rom flashed and I booted up the device I have micro SDCard 2GB in the NC and it isn't able to read the SD card it says I need to put one in. Every time I go to download something off the browser it says I need an SD card to download this so and so file. I used my phone SD card in the NC to see if that will work and same problem persists. I have .apk files on my SD card I would like to run on the NC but can't get them off the SD card. This NC belongs to my brother who I was trying to help out by rooting and putting cm7 on it for him but now there's really nothing he can do with it any and all help is welcome. If someone knows how to fix this please tell me. (When I plug it into the computer it still can't read the files on the NC. Even if I mount SD card or USB storage through recovery) please help
Sent from my Xoom using xda premium
Try plugging in the SD card by itself to your PC to see if it got corrupted, and if it hasn't you can transfer your files, format it and give it another go. I hope that helps.
Yep. Sounds like a card corruption problem. I had one. Reformat was the only solution. Be prepared to sacrifice your apks. And always drop spare copies onto your computer, just in case.
After attemptindg to make a bootable sd card with CM7 and failed probably due to my inexperience I tried to reformat the card and start over again. Now my computer will sometimes recognise the card and other times not. The real problem is that the nook will not not mount the card and formatting on the nook fails every time. I have tried numerous sd cards and none will not format on the nook. As a last resort I have done the 8x's reset and now am back to the begining but it willstill not format the sd card. Any help as where to start would be greatly apperciated
Steve
localloser said:
After attemptindg to make a bootable sd card with CM7 and failed probably due to my inexperience I tried to reformat the card and start over again. Now my computer will sometimes recognise the card and other times not. The real problem is that the nook will not not mount the card and formatting on the nook fails every time. I have tried numerous sd cards and none will not format on the nook. As a last resort I have done the 8x's reset and now am back to the begining but it willstill not format the sd card. Any help as where to start would be greatly apperciated
Steve
Click to expand...
Click to collapse
You need to format the card on your PC with SDFormatter (free on the web). It formats it properly so the nook can read it and erase it if you want.
Sent from my HD+ running CM10 on SD with XDA Premium
nook color will not mount sd card
Thanks-- I have downloaded the sdformat program and formatted the sd card as you indicated. When I put the card in the nook it asked to format the card. At that point I ejected the card and followed your instructions in the signature of your message. At this point I put the card
into the nook and powered it up. The nook then booted into the Barnes and Noble software. It looks as if the nook is not seeing the sd card.
any suggestions?
Steve
Just tried again. (formatting.. burning image and the cm7.2 zip file to the sd card and the nook will not boot at all with the sd card inserted.
Take out the card and it boots to the stock software.. May be a new card is needed???
Steve
localloser said:
Just tried again. (formatting.. burning image and the cm7.2 zip file to the sd card and the nook will not boot at all with the sd card inserted.
Take out the card and it boots to the stock software.. May be a new card is needed???
Steve
Click to expand...
Click to collapse
You are sending me mixed issues. You said you tried to make bootable SD. It failed. Then you could not get the nook to recognize card or the PC to reliably recognize it. What I told you to do was for getting the card back as readable on the PC and nook.
Now you are trying to make it bootable again? That is a different issue. Look in my nook color tips thread at item A9 to see some issues with making a bootable SD.
And you are sure this is a Nook Color, not a Nook Tablet?
Sent from my HD+ running CM10 on SD with XDA Premium
Thanks for the reply, as i said earlier I did reformat the card as per you suggestion to no avail. The PC was able to recognise the card and the nook color was not. At that point I tried to make the card bootable again hoping that the Nook would see it with the image on it. Now the nook color will not boot up at all with the card inserted but will boot normallly to stock without the sd card inserted. Sorry for any confusion. I will try and reformat the card again an and let you know wha happens. This time I will go no furthur till I hear from you folks.
Again thanks for all you do!! Steve
localloser said:
Thanks for the reply, as i said earlier I did reformat the card as per you suggestion to no avail. The PC was able to recognise the card and the nook color was not. At that point I tried to make the card bootable again hoping that the Nook would see it with the image on it. Now the nook color will not boot up at all with the card inserted but will boot normallly to stock without the sd card inserted. Sorry for any confusion. I will try and reformat the card again an and let you know wha happens. This time I will go no furthur till I hear from you folks.
Again thanks for all you do!! Steve
Click to expand...
Click to collapse
What you did not say in your earlier post was whether after formatting the SD and inserting in the NC and it asking if you wanted to format, was did you try to let the NC format it and was it successful? You just said you immediately removed it and followed some instructions from my signature. I have a lot of instructions there so I don't know what you did.
Sent from my HD+ running CM10 on SD with XDA Premium
The sd card formatted sucessfully. at that point I inserted it into the nook and booted it up. The nook indicated that the card was inserted. Then it asked to format the sd card. When I did so the reply was formatting failed. Tried several attempts. The computer had no problem seeing the
card so i put the image on the card along with the CM encore zip file and tried it in the nook. The nook would not boot with the card inserted,
so now at this point I have formatted the card again sucsessfully using the sd formatter program. Not sure where to go from here.
thanks for all you help thus far....Steve
localloser said:
The sd card formatted sucessfully. at that point I inserted it into the nook and booted it up. The nook indicated that the card was inserted. Then it asked to format the sd card. When I did so the reply was formatting failed. Tried several attempts. The computer had no problem seeing the
card so i put the image on the card along with the CM encore zip file and tried it in the nook. The nook would not boot with the card inserted,
so now at this point I have formatted the card again sucsessfully using the sd formatter program. Not sure where to go from here.
thanks for all you help thus far....Steve
Click to expand...
Click to collapse
All I can suggest now is a different card.
Sent from my HD+ running CM10 on SD with XDA Premium
IAJust tried a brand new Sandisk card to no avail. The nook color notifies me of the card being inserted but that it needs to be formatted. When the format option is selected the format fails. Do you think there is something physically wrong with the sd card Reader? Is there an alternate way of getting the CM software on the. Nook color. I am openn to any suggestions. Tkank for all the assistance. Steve
localloser said:
IAJust tried a brand new Sandisk card to no avail. The nook color notifies me of the card being inserted but that it needs to be formatted. When the format option is selected the format fails. Do you think there is something physically wrong with the sd card Reader? Is there an alternate way of getting the CM software on the. Nook color. I am openn to any suggestions. Tkank for all the assistance. Steve
Click to expand...
Click to collapse
May be card reader and may be your slot in the nook.
Yes there is an alternate way using ADB, but it is not simple.
You have to connect with ADB, mount the boot partition and push the RecImg and RecRam files from the burned card to the boot partition. But you have to use my bootable CWM SD to get the files. Most other CWM cards don't have them. Those two files replace the stock versions and then you can boot to CWM by holding the n key while booting. Then you can choose files to flash from internal memory.
Sent from my HD+ running CM10 on SD with XDA Premium
Thanks for the idea.... but being a novice I think that that one may be over my head. I think at this point I'll just have a regular old Nook color ereader. Thanks for all your help and suggestions..I think that the Nook color has gotten the best of me. Steve
Hi XDA Family.
I recently flashed Omega Rom on my Galaxy S4 and everything went well. The next day I played my music from my SD card then there was an error "cant play this music file or something like this" after that my S4 was displaying that my SD card is blank or has unsupported files. The phone recommended that I need to format it using the phone. I formatted it like my phone said but it did nothing. Phone still displaying that SD card is blank or has unsupported files.
The next day bought a new SD card (8gb Scandisk) and the phone read it no problem. I transferred all my music to my new SD card and after playing my music the error appeared again and now both SD cards are showing that the SD cards are blank or has unsupported files.
Re flashed stock rom and stock kernel but still has the same errors on my SD card
Borrowed a memory card reader from a friend and formatted the SD card using my PC formatted it with all know file system. FAT32, exfat and NTFS but everything is not working.
Lastly I tried my SD cards with another Galaxy s4 and they worked without problems, formatted it using the phones formatting capability inserted it on my S4 but still has the same errors.
Any suggestions are greatly appreciated guys.
Thanks in advance.
Any help would be greatly appriciated.
I have The same problem.
Pls help
Sent from my GT-I9505 using xda premium
did you try any rescan sdcard application from playstore?
samersh72 said:
did you try any rescan sdcard application from playstore?
Click to expand...
Click to collapse
Hi! Thanks for replying, I was beginning to lose hope that anybody would reply. Tried your suggestion. Downloaded 3 scanning SD card apps on Playstore but none of them worked. Both of my SD card still shows up as blank in my S4.
This only happened after i flashed a ROM, anything I still need to do to go back to stock? Already flashed an official softwas and kernel.
carlo06 said:
Hi! Thanks for replying, I was beginning to lose hope that anybody would reply. Tried your suggestion. Downloaded 3 scanning SD card apps on Playstore but none of them worked. Both of my SD card still shows up as blank in my S4.
This only happened after i flashed a ROM, anything I still need to do to go back to stock? Already flashed an official softwas and kernel.
Click to expand...
Click to collapse
take a look here
samersh72 said:
take a look here
Click to expand...
Click to collapse
Hi Good Morning!
Tried that last night still the same problem. Tried the chkdsk on CMD still the same problem. I can buy another SD card but I am just afraid that maybe a week or two the sd card will mulfunction again and I cant forget the fact that my PC and other S4 can read my SD cards.
Two possible reasons. Sandisk SD cards supposedly fail easily but yours is 8gb so it should be ok.
Next reason is Omega Rom bug, I personally don't have this issue but I have a similar one. My Sdcard does not mount as r/w automatically.
lambstone said:
Two possible reasons. Sandisk SD cards supposedly fail easily but yours is 8gb so it should be ok.
Next reason is Omega Rom bug, I personally don't have this issue but I have a similar one. My Sdcard does not mount as r/w automatically.
Click to expand...
Click to collapse
Thanks for the reply lamstone, I have read somewhere that disabling the automount helps. Can you help me on how to disable automount? and can I do it if I am on stock firmware?
Thanks
Just use the card reader and adapter and attach it to your computer and format the card using exFAT file system. Then use it in phone. AFAIK the current custom recoveries already support exFAT. So you should be fine for anything. I had similar issue with my 32GB Sandisk Ultra card when I formated it using phone. No issues since I formated it as exFAT on PC.
Funkym0nkey said:
Just use the card reader and adapter and attach it to your computer and format the card using exFAT file system. Then use it in phone. AFAIK the current custom recoveries already support exFAT. So you should be fine for anything. I had similar issue with my 32GB Sandisk Ultra card when I formated it using phone. No issues since I formated it as exFAT on PC.
Click to expand...
Click to collapse
Hi thanks for the reply.
Tried Fat32, Exfat and ntfs and all of the still has the same error. Actually bought a new 16gb sd card earlier I popped it in my s4 and still has the same problem.
This started happening when I flashed Omega rom. Is there anyhow I can check if I have a stock everything? My kernel, recovery and firmware?
thanks for the patience.
BUMP!!!
Anybody who can help me??
Another update is that I installed CWM recovery Philz Edition and tried hooking it up on the UBS cable and mount usb storage. My computer can now see my sd card inserted on my phone. Tried reformat while my phone is on CWM and connected thru USB cable and formatting goes thru but phone still says SD Card is blank or has unsupported files.
One thing that is strange though is that when I try to copy things to my SD card while my phone is attached to the USB cable my PC freezes like it cant copy any files to my SD card.
Any help would be greatly appreciated.
Same problem
carlo06 said:
BUMP!!!
Anybody who can help me??
Another update is that I installed CWM recovery Philz Edition and tried hooking it up on the UBS cable and mount usb storage. My computer can now see my sd card inserted on my phone. Tried reformat while my phone is on CWM and connected thru USB cable and formatting goes thru but phone still says SD Card is blank or has unsupported files.
One thing that is strange though is that when I try to copy things to my SD card while my phone is attached to the USB cable my PC freezes like it cant copy any files to my SD card.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I have the same problem. I bought an 16GB class 10 Kingston SD Card and inserted in my phone . Nothing. THen I disabled Developer options and it appeared. Then I though I will reformat it using directly the phone. Ok. Tried to use it bam "unexpectedly removed " and nothing. Then I tried another SD Card and the same happend first good then removed and so the third one.
Any updates on this thread ? Did you manage to make it work ?
This phone is pissing me off. I am having same problems with stock music player and Goohle Play Music app giving errors on any tracks in my Sandisc 32 gb class 6 micro SD. I have started to wonder if it is related to me using the Samsung Smart dock with a 500 gb external HDD to watch movies on HDTV. It mounts the drive and works great but following day I was try to play music that worked day before and now I get unsupported file type error and other error.
I tried avg to check for a virus(which is unlikely imo) and it shows no virus. I just tried this SD on another android device (Nabi 2 tablet running 4.0.4 and all songs play PERFECT without error. This must be my At&t galaxy S4. Any ideas anyone? I really dont feel like reformatting the sd since it seems to work fine on tablet. Also: I already wiped both music player apps in settings and eventually uninstalled and reinstalled the apps (and another musiv player also) to see if it was cache related. This made no difference.
Edit* oops. After rereading OP... I think I posted this in wrong thread.lol. But my issue with S4 and SD card error with music playback is similar so Ill leave my post unless mod wants to remove it. FYI I fixed my issue(somewhat). Ths SD card is fine as I suspected. The phone has an issue having stock music app, play music and mx player. Either one of the apps was running in background or the system was running sound in background. Hope to not have problem repeat itself. I bet custom rom would fix this if AT&T hadnt locked phone with sneaky update.
You can try flash Rom Cook MH8.
I think your problem will resolve.
Thanks
i think you need to try this.. Get your SD card and try to put in another phone example Blackberry (im not sure if it will work on HTC, alcatel etc. except samsung).
then format using other phone. after formatting ffrom other phone. reinsert the sd card on your samsung unit. then check the storage and try reformatting again using your Samsung.
still nothing
Well. I still do not know how to fix this and I searched and tried almost everything. Only thing that I think might be wrong that somehow the "auto mount SD " does not work.
Because the card is there. The phone cannot see it . Other phones do fine. And in CWM even I can see that there is indeed an SD card but cannot acces the files.
So... I really do not know
i am also having this problem but nothing seems to help have tried alot of thing but yeah :/ sp i have given up on it ! it is a 32 gb sd card loved it.. now i almost got anxiety cus i have so little storage xD hehe well well might buy a new sd soon
My class 4 32gb sdcard too stoped working properly these days.Sometimes it gets unmounted randomly or it doesn't get detected or it shows blank sdcard.I don't know what cause that but the best I could have done is to backup my data and buy a sammy 32gb class10 micro sd.I heard that S4 has problems with sandisk ones.
Sent from my GT-I9500 using Tapatalk 4
UPDATE:
My SD Card problems has not been fixed until now!
I just flashed the leaked 4.3 firmware and I tried to insert an SD Card just to try it and BAM! it worked!!! I am now afraid of rooting my phone because maybe the SD Card will not be working again but as long as my SD Card is working I am good!
Anybody who has problems with their SD Card should try to flash this:
http://forum.xda-developers.com/showthread.php?t=2465713
hope this helps!