Related
Seems like every time I wake my phone up the home screen is horizontal even though I'm holding my phone vertical. Any way to fix this?
Sent from my Incredible using XDA App
Sometimes, and I notice it mostly after unlocking it, the screen orientation is off (I'll be holding it "in portrait", but the screen is in landscape mode). Instead of switching immediately to portrait, or even after a couple seconds, I have to hold it in landscape then back to portrait for it to switch.
I only started noticing it after installing 2.2 last week, and it doesn't happen all the time. Has anyone else seen this behavior? I haven't calibrated the compass since 2.2, and after 2 minutes of rotating the phone around on 2.1, on at least two different occasions, I said screw it and stopped (before the calibration finished). Could that by why?
Also, maybe it's the launcher (ADW), but sometimes click-holding a widget/app shortcut on one of the screens is "wonky". Sometime I can click-hold it and the phone will vibrate and I can drag it to the trash or move it around no problem. But then sometimes it just won't activate. I just tried to delete a widget around 20 times. I click-held for anywhere from 1-3 seconds, and no vibrate. However, after I let go, it activated the program. WTF? Eventually it worked, but it really shouldn't take that many attempts.
Same issue. I have LP+. I disabled auto-rotation in settings\display as a temporary fix.
Sent from my DROIDX using Tapatalk
I have the same issue after unlock too. I've noticed that I have to hold it in portrait for a few seconds and tap the top to get it rotated. Quite annoying since it happens all day long. You're right, this didn't happen before froyo.
Anyone have skills with re-mapping buttons? I would love a dedicated button to rotate screen. I wouldn't mind the camera button remapped for that. Full Press=Rotates screen/Half Press=Locks screen in that rotation.
thats odd im on rooted 2.2 and dont have that problem with adw installed on it. it could be the accelerometer. i notice it other times not after unlock. usually i do have to wait a second and tapping it does help which leads me to belive its the accelerometer. however if this is a really big issue for alot of people then a button to auto rotate the screen would be very helpful.
Did anyone try calibrating their compass after moving to 2.2 and see if that fixes the screen orientation issues?
Sapo, I have. After doing that it wasn't happening for a little while (maybe a day or so), but it's back now for the last week, and it's happening more often. And I tried what someone else suggested, tapping on the top of my phone with a finger, and that flips it around to normal every time.
happens a lot with mine too, unrooted, still running moto blur...several apps open that way, email, messaging....not always though, so it's a bit puzzling.
I would try using the Stock Blur Home to see if its just ADW
see the post above yours
Ubermicro13 said:
I would try using the Stock Blur Home to see if its just ADW
Click to expand...
Click to collapse
see the post above yours
Sometimes the Galaxy S II seems to have a slight delay when waking it by pressing the Home or Power button.
I saw a Thread about it in a german Phone forum where a lot of people reported this. I myself noticed it too. I'm running KE2 with Widgetlocker. I can disable Widgetlocker, it still happens.
If you wake it just after locking, it will be instant. If you wait a couple of seconds you will get a delay when waking the device. But it doesn't behave the same all the time, sometimes it's even instantly when waiting for a few minutes.
Can you guys confirm this?
yeah same problem here. I thought the latest update had fixed it but it still seems to be there
Oh and something other that I noticed, while having the phone connected to my pc, it always wakes up instantly.
prob coz its clock the CPU down while screen is off.
domazdk said:
prob coz its clock the CPU down while screen is off.
Click to expand...
Click to collapse
Either that or its the power management when its not being charged.
My lg 2x do not have this delay, should be able to fix in a kernel mod
DocRambone said:
My lg 2x do not have this delay, should be able to fix in a kernel mod
Click to expand...
Click to collapse
Great to hear that! I didn't have this either on my Desire and it was clocked down to 200Mhz...
Oh and another thing, can you disable the double Home button press? Because if you press it 1 time you are getting a slight delay because it has to wait if there will be a second press. I don't need the double-press voice Feature.
Hey. 1st post. Been reading for a while, but the wake issue annoyed me too, so I tried WidgetLocker with not much change. PowerAmp's lock widget seems to make it faster, but I found if you lower the res of the wallpaper on your lock screen, the waking is instant, which I recently realised.
I go to interfacelift.com and choose a wallpaper at 1400x900 (or so. Usually a good one for the actual background, so it doesnt really matter much for the lockscreen) save it and open to allow you to change the lock screen wallpaper. It does mean it won't be the nicest image, but it's made my phone waking sooooo much faster.
Cheers
Thanks for that, it appears to work.
http://forum.xda-developers.com/showthread.php?t=1095371
have you tried this?
I have tried copying over the modified framework and a low resolution (800x480) solid black wallpaper but no luck.
This is starting to agitate me to be honest. I’ve been telling the guy opposite me at work that S2 is the best phone available at the moment for a couple of weeks now. He ignored me and brought the sensation.
Now he has a phone that switches on immediately when he presses the power, immediately switches to his home screen when he presses the home button and his battery is lasting twice as long as mine.
Don’t get me wrong, I’d still rather have the S2. But as the new toy feeling starts to where off the little things are starting to bother me.
i have the same issue.
Well, i had the same lag at power on.
what i did :
1 change wall paper to a standard one, in the samsung gallery wallpaper. Chose one screen WP... ans applied it to both on lock and screen wallpaper
test, switch it of and on.... No lag
I applied back my large customized wallpaper i had before and applied on screen, didn't touch lock screen cause i use Widgetlock...
Now, no more lag....
It's not a cpu sleep issue, just a bug in lock screen wallpaper in my opinion....
Thanks for the suggestions Cuspide but it didn't help me unfortunatley. I even brought widgetlocker in case it was that.
It is true, it may be a minor problem but it is so annoying.
When using my HD2 with Windows Mobile, the wake up was instant, in fact even with Latitude, Email and Facebook syncs, the battery life was fantastic. HD2 with Android obviously reduced battery life and there was the wake up lag - I thought all these niggles would go with an 'actual' Android phone, but it doesn't seem that way...
I have tried the following with no luck;
- modified framework and CRT animation
- installing SetCPU and putting the governor to performance (and min 1200Mhz)
- setting a lower resolution lockscreen picture (800x480)
I'm hoping it is only software related, and something Samsung will fix very soon.
I believe that it is a mere software issue.
My Desire clocks down to 245Mhz when it's sleeping. And it wakes instantly and clocks back up to 998Mhz. The change is completely unnoticeable.
And the GSII with 1.2Ghz and 1GB of RAM - hopefully this will be fixed in a future update.
This seems to just be a kernel sleep issue.
I would imagine it's fixable in a kernel update.
I've noticed that the delay isn't apparent when the phone is on AC power. Plug your charger in and wake the phone up and it's instant, take it off charge and wake it up and there's the delay again.
it's the sleep policy. open an IM like ebuddy (it voids device to get in sleep policy) and no delay at all
update
hi Guys
has anyone found a way around this. The wakeup delay is very annoying..........
I'm not sure if I'm describing this correctly in the title so let me try and elaborate -
I've used probably 10-15 different ROMs for my Nexus 10 and lately every single one I try, I have the same issue when I have the screen titled down horizontally towards me while reading in bed ( think holding it up while lying on my back, angled down at me so I can read ), where the screen blacks out/goes to sleep.
Then I have to tilt it back so it's vertical again and sometimes it puts me at the lock screen but more often I have to hit the power button to get the lock screen back, infuriatingly I then sometimes get stuck in a loop of hitting power to get to lock screen as it's going back to lock screen so then it kills the display again so then I have to hit power again etc etc. Once the screen is back and displaying everything is fine until some random amount of time ( between 5 seconds & 5 minutes ) when the screen just goes black again - presumably when I move/adjust my position or the angle of the screen.
Anyway - I believe this is version independent, I don't think it's the ROMs, it's like it's something built-in to the OS.
The only thing I can figure is it's either related to the accelerometer detecting that I'm tilting the tablet horizontally so the screen is facing down and thus it is killing the display, OR it's the light sensor detecting a darkening of the light since I would be angling the screen away from a direct light source and so it kills the screen thinking I'm placing it face down on a table.
Possibly related - I've also noticed since 4.2.2 ( maybe coincidence ) that I can't rotate my screen 180 degrees and be able to unlock the device. No matter what, if I flip that sucker around it instantly kills the display and locks the screen. I've got auto-rotate on, so I know that's not the issue, and if I hit the power button to get the lock screen up, then unlock it INSTANTLY locks again and kills the screen. It's like there's a setting now that says I CAN rotate if I want to but there's no point because I can't actually unlock the screen to do anything. Keep in mind this ONLY happens when flipping it 180 - if it do it 90 or 270 and have it vertical there is no issue, it is literally only when it is flipped 180 that this occurs.
Am I over thinking this or is there something really, really obvious I'm missing? I've gone over every setting I can think of and the only thing remotely screen related is the sleep timer but it doesn't matter how long I make it or if I even turn it off entirely - every time I get into bed to read I have to mash the power button to get the screen going again. It's minor in the grand scheme of things but it is incredibly frustrating when all I want to do is read before going to sleep, just stay open damn it !
I hate to shameless bump this but does anyone know what I'm talking about? If I tilt my N10 past a certain degree ( I want to say it's around 30 degrees or so ) the screen just goes to sleep, how do I stop this? I've used a ton of different ROMs so it seems to be something consistent and/or a fundamental "feature" of JellyBean and/or Android in general.
Astriaal said:
I hate to shameless bump this but does anyone know what I'm talking about? If I tilt my N10 past a certain degree ( I want to say it's around 30 degrees or so ) the screen just goes to sleep, how do I stop this? I've used a ton of different ROMs so it seems to be something consistent and/or a fundamental "feature" of JellyBean and/or Android in general.
Click to expand...
Click to collapse
If nothing else, I would say it rather "seems" to be a hardware issue, because I've never seen this behavior on my own device. That said, I can't say I've heard of many people talking about this either.
Rirere said:
If nothing else, I would say it rather "seems" to be a hardware issue, because I've never seen this behavior on my own device. That said, I can't say I've heard of many people talking about this either.
Click to expand...
Click to collapse
Thanks for replying! Good point - I've just assumed it wasn't something specific to MY N10 because I can't imagine why it would happen from a hardware perspective since it's never been damaged ( dropped, scuffed ) in any way. Unless I just got a bad egg with a faulty accelerometer or light sensor or something, which is also possible.
I suppose if no one else is experiencing this and it's isolated to me and is ROM independent than it must be hardware. Either that or when I'm laying in bed I generate large bursts of electromagnetic activity that cause it to think I've closed the "smart" cover. :cyclops:
Screen Timeout
I don't know if any of this matters, but I am just curious.
What is your Screen Timeout setting? Have you tried increasing this? Do you have it set to lock screen upon pressing the power button? Have you tried changing it? Do you use a pattern lock, pin code, other?
SmokinCharger said:
I don't know if any of this matters, but I am just curious.
What is your Screen Timeout setting? Have you tried increasing this? Do you have it set to lock screen upon pressing the power button? Have you tried changing it? Do you use a pattern lock, pin code, other?
Click to expand...
Click to collapse
My screen timeout is set to 10 minutes, though it doesn't seem to matter what I set it to - I just set it to 30 and the same thing happens after a second of tilting it.
I have screen lock via slide, but while I do lock/kill the screen via pressing the power button I just realized I've never actually set it to do this. I guess I thought it was a built-in feature - I've just gone through all the settings I have ( currently using FlamingMonkey AOSP ROM for reference ) and I don't see any option anywhere to enable/disable this feature. :S
Maybe there is an issue with my power button and when I tilt the tablet it jiggles it enough that it "presses" down and locks?
Use ultimate rotation control from store and force the lockscreen to landscape at all times.
Astriaal said:
My screen timeout is set to 10 minutes, though it doesn't seem to matter what I set it to - I just set it to 30 and the same thing ould be there for your ROM too. happens after a second of tilting it.
I have screen lock via slide, but while I do lock/kill the screen via pressing the power button I just realized I've never actually set it to do this. I guess I thought it was a built-in feature - I've just gone through all the settings I have ( currently using FlamingMonkey AOSP ROM for reference ) and I don't see any option anywhere to enable/disable this feature. :S
Maybe there is an issue with my power button and when I tilt the tablet it jiggles it enough that it "presses" down and locks?
Click to expand...
Click to collapse
I think that you are on the right track. The option to lock the screen on hitting the power button is under the Security settings for stock android. It should be there for your ROM too.
I constantly hit my power button when sitting it down or picking it up. That is why I disable the instant lock option.
I recently bought a Note 3 (very excited about the device), and once i got it, i started playing around with it. The capacitive buttons were working fine and were only lighting up whenever i touched the sides of the home button (as they should). After some time with playing around with the phone, i decided to install Nova Launcher just to check it out and see how i liked it (i was running the standard touchwiz before). The first thing i noticed with Nova Launcher was that once it was running, the capacitive buttons would light up every time i touched the screen. If i went to unlock the phone, they would light up. If i swiped to go to another home screen, they would light up. If i scrolled a webpage in the browser, they would light up. This really irked me, and so i decided to uninstall Nova Launcher (hoping this would make the buttons light up normally again). However, i have not found the solution to this issue. I don't want to completely disable the capacitive buttons so they don't light up even if i press them. I simply want to go back to the standard capacitive button routine where they light up only when i touch them, not whenever i touch the screen.
Can anyone please help me fix this issue? Any help will be greatly appreciated!
Thanks!
Settings > Device > Display > Touch light key duration and just set your desired time
radicalisto said:
Settings > Device > Display > Touch light key duration and just set your desired time
Click to expand...
Click to collapse
I have looked into that already, but my issue isn't the time limit. My time limit is at the standard 1.5 seconds (which it has always been at), the issue is that the capacitive buttons light up whenever my finger touches the touchscreen, and i want to go back to the buttons only lighting up whenever i actually touch them next the home button.
Yeah they will light up when you touch the screen, it's been like that for a while now. Mine does it to.
EDIT::
Actually mine doesn't do it all the time only sometimes, - disable it then clear cache and clear default launcher then try it again
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
Yeah they will light up when you touch the screen, it's been like that for a while now. Mine does it to.
EDIT::
Actually mine doesn't do it all the time only sometimes, - disable it then clear cache and clear default launcher then try it again
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When do the capacitive buttons light up for you? I did all of that and it doesnt seem like anything changed, and i even did a settings reset through the menu.
I have the 6 second time set on mine, they light up when I use certain apps, or text msgs via hangouts - I use a kitkat launcher too
Sent from my SM-N9005 using XDA Premium 4 mobile app
When I touch the screen they light up as well...
Sent from my SM-N900P using Tapatalk
What confuses me is this article then:
" connect(dot)dpreview(dot)com/post/7967117746/ "
If you scroll to the third paragraph in the subheading "Body & Design", it says:
"To the left and right of the home button you'll find two more capacitive buttons but they only light up when touched"
This is what i thought was true to - that the buttons only light up when you touch them, not when you touch the screen.
Strange - Mine only light up when I touch them.
Does anyone know if the capacitive buttons are supposed to light up when you press the screen? It seems like different people have different situations of when the buttons light up.
karsaliar said:
Does anyone know if the capacitive buttons are supposed to light up when you press the screen? It seems like different people have different situations of when the buttons light up.
Click to expand...
Click to collapse
They only light up when I touch the buttons or turn on the screen when the phone is locked.
(SM-N900W8)
Capacitive button lights (EASY FIX)
Make sure the power save mode is off