Database Users

[Q] defy stuck at motorola boot screen after flash

i flash my phone with a custom rom from this forum
succesfull until RSD Lite step
after RSD Lite, my phone stuck at Motorola logo with blur
tried pull off and pulling on the batery with power and volume up, it got back to bootloader screen
try aother RSD Power, it is still the same
Progress till 100 persen, but the phone stucked at motorola blur logo
any solution, guys?
thanks

What were you trying to flash?

I try to upgrade to froyo.
it stuck after RSD Lite step

Well first, is your phone rooted? Secondly, what stock version did you have?
I think I can get you up and running with Froyo

you may try to install your original version/build number sbf. if its work, maybe you can try flash froyo ROM again. then when you finished restore custom ROM all you have to do is go to bootloader then flash boot/devtree only sbf.. dont pull usb connection. but if RSD want you to turn phone manually then you need to press power button even though your phone at booting state..

i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur

FL4M3K1NG said:
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
Click to expand...
Click to collapse
did you find fix?

What SBF file did you use?
Have you tried another file?

get into stock recover (Vol Up + Power) then wipe data/cache

Half Bricked
I have an Mb525 rooted (that was) running stock 2.2 Blurred. I installed the Defy boot loader and hard reset/wiped partitions and (tried to) install cm7 from SD, it installs fine, goes fine, everything is all set. Reboot the device and the splash image pops up with the white LED first, then the blue one for boot loader, and finally the green one. It stays on splash screen. I tried 2 different versions of cm7 and both do the same thing. I'm able to access the boot loader, it just doesn't finish loading whatever I flash onto it.
As my phone is dysfunctional, I would appreciate it if you could contact me through my Skype;
kurtdunsmore
I won't receive emails.. =/
Specs:
Moto Defy shipped with 2.1
Rooted
Red Lense
T-Mobile, U.S.A.
Please let me know if any other information would be helpful.

tendyfish said:
get into stock recover (Vol Up + Power) then wipe data/cache
Click to expand...
Click to collapse
to go in stock recovery u must use Vol Down + Power

Solution
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.

aed0101 said:
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
Click to expand...
Click to collapse
This worked perfectly well. Thank you.
Andy

[Q] Defy stuck on Motorola's logo and can't access the recovery mode

Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!

again flash with nodric ram

moji7 said:
again flash with nodric ram
Click to expand...
Click to collapse
Sorry, I don`t understand

He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.

twa_priv said:
He is saying you should start over and flash the Nordic SBF again.
But it would be helpful to know which SBF's you've tried which didn't work. What RSD lite version you are using? I'm using RSD Lite 5.3.1 and the 5.1.0 motorola driver and never had issues.
Don't forget to "wipe data/factory reset" and "wipe cache" in Stock Recovery (power + vol down) before flashing.
Also, what did you do before CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
Im using RSD lite 4.9 and I don't know the version of the drivers...
And I could not wipe data/cache because I could not access the stock recovery
when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
Click to expand...
Click to collapse

To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.

twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
I already tried it, but i can't acces the stock recovery!
pituca292 said:
Hello guys, first, sorry for my bad english.
I'm having some problems with my defy, I was using the CM7 for months but now it start to stuck on Motorola's logo and when I tried to access the stock recovery, by pressing Power + volume down, anything happened, I only can access the bootloader by pressing Power + volume up.
So I tried to flash a old SBF that I have here, but, when the device will start again, it stuck on Motorola's logo again.
Then I downloaded a SBF that seems to be the "original of my phone version" and flashed it, but the device stills stucking at the Motorola's logo.
I think that I need to wipe data/cache, but how?!?
Any advices??
I need my phoneee!!
Click to expand...
Click to collapse

Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.

twa_priv said:
Sorry, missed that part.
Well ... I don't recall reading about such behaviour before - unless the battery is dead.
But then you wouldn't be able to get the bootloader either.
I would try again to get into recovery and make sure you press the power + vol up buttons for a few seconds before releasing.
And out of curiosity: what exactly did you do when CM7 stopped working. It doesn't break for no reason.
Click to expand...
Click to collapse
I tried to enter in the recovery mode a lot of times and nothing!
I didn't done anything diferent that could make CM7 stop, it stopped by itself!

Guys, I'm thinking in send it to a techinical support, of Motorola.
What do you think?

twa_priv said:
To enter stock recovery: Power up phone and press the vol down button. When you see the android icon push volume up and down at the same time.
Click to expand...
Click to collapse
You are a life saver!
-----------
I got a similar situation as our friend here. Today I had shutdown my Defy (rooted + stock 2.2.1) when i tried to turn It on again It got stuck at the operator logo forever!
I did the clear data from recovery and I got my cellphone back to live. Thanks!

Im Stuck too...
I have a problem with my Defy MB525, This morning I woke up and found the cell with the Android Logo with Exclamation, it was really hot so I turn off pulling the battery.
Then I tried to power ON but still stuck on Motorola's logo, in trying to enter the recovery (Pressing vol+ and Power but nothing, same pressing vol-).
the strangest of all is that my Defy don't display the white led, so it's not charging?
As far as I was to the symbol of android with red exclamation, I tried pressing the volume buttons but none served.
I was looking in other threads but nothing helps me, can you help me please? thanks.

logo m and no recovery HELP:(

hi i have flashed cm902 rom it booted up but it dont like me cause makes eroros so i wanted ro reflash with old stock 2,3,3 and with recovery bootstrap i thinked what i wild came into recovery but it just hanged and now no recovery only white triangle with yelow! and only logo m, so maybe someone hav this problem earlier and can help me?cause now im searching half day of work for searching for solution.
thanks fo anny help

Dont worry. Do this. First use the wall charger and charge your phone for at least 30mins. So if your phone is off then it will charge till 70-80%. Check if it is charging by looking at the micro-usb port lighting up.
Now go to the White triangle with ! mark. Then press @ button. You will get options. Select erase data by pressing volume button and then clicking enter button on your keypad.
After the wipe has been done pull out battery. Then start RSD Lite on your computer. Put the battery to your phone. Now press both volume up and volume down together and then power button for 2secs. Leave power button. You will see it in bootloader.
Now load sbf file on RSD software and wait for it to recognize your phone. Then click start. Thats it. Your phone should be ok.

Urgent Help - Defy bricked itself!! stuck on red M logo - going away in 6 hours!!!

So everything was running fine - i was on the last CM7 build ( maniacs final ) with a BL7 defy, left it on charge overnight and when i came ot it this morning its stuck on the red M logo and wont boot - and recovery has gone as well - no blue LED.
I can boot into the bootloader, but thats about it, the standard recovery menu wont appear either.
need help fast - please....

Ive just tried re-flashing the SBF files as per the instructions on rooting a bl7 defy, while it appeared to go OK, the phone is still stuck on the red motorola logo - no blue LED - please help....

Recovery mode doesnt work, after pulling the battery and re-starting i t whilst pressing power down, the only thing that happens is a red motorola logo, and there it stays.
please help...... ive got three hours to fix this.

2Pints said:
Recovery mode doesnt work, after pulling the battery and re-starting i t whilst pressing power down, the only thing that happens is a red motorola logo, and there it stays.
please help...... ive got three hours to fix this.
Click to expand...
Click to collapse
Power it off fully by taking out the battery and wait for a few minutes. Then press Vol- and then power button, till ! mark comes. Then press both Vol+ and vol-.

hotdog125 said:
Power it off fully by taking out the battery and wait for a few minutes. Then press Vol- and then power button, till ! mark comes. Then press both Vol+ and vol-.
Click to expand...
Click to collapse
thanks, left it for a good few minutes, all i get is a few minutes of black screen, followed by the red motorola logo, still nothing,
the weird thing is that it bricked itself after running fine for the last few weeks.

2Pints said:
thanks, left it for a good few minutes, all i get is a few minutes of black screen, followed by the red motorola logo, still nothing,
the weird thing is that it bricked itself after running fine for the last few weeks.
Click to expand...
Click to collapse
Hmmm, that worked for me. Took out the battery, left it for 2 minutes. I put back the battery, nothing happened. Then I realized that the phone had gone off so I did what I told you.

I can get to the bootloader with no problem, stock recovery on the other hand is completely absesnt

2Pints said:
I can get to the bootloader with no problem, stock recovery on the other hand is completely absesnt
Click to expand...
Click to collapse
You're not doing it correctly I suspect. However, flash an sbf and try.

By not doing it right, what do you mean?? this is what ive been doing take out battery - wait - replace battery and then hold power button down then hold the power button while keeping the volume down key pressed
RSD lite is showing the device as Omap3630 and imei as N/A

2Pints said:
By not doing it right, what do you mean?? this is what ive been doing take out battery - wait - replace battery and then hold power button down then hold the power button while keeping the volume down key pressed
RSD lite is showing the device as Omap3630 and imei as N/A
Click to expand...
Click to collapse
What I mean is that when you put the battery back, the phone should not switch on (the moto symbol should not come)
As long as it shows in RSDlite, its all good.

hotdog125 said:
What I mean is that when you put the battery back, the phone should not switch on (the moto symbol should not come)
As long as it shows in RSDlite, its all good.
Click to expand...
Click to collapse
again thanks for the help - still no luck. going to have to call it quits.
all i need now is a replacement phone - any sugestions, waterproof/resistant not too big?

2Pints said:
again thanks for the help - still no luck. going to have to call it quits.
all i need now is a replacement phone - any sugestions, waterproof/resistant not too big?
Click to expand...
Click to collapse
THE BLUE LED ONLY COMES WHEN CUSTOM RECOVERY IS INSTALLED.
SEE GOOGLE ON HOW TO ENTER STOCK RECOVERY. IF YOU MANAGED TO USE RSDLITE THEN I'M SURE YOU CAN GO TO STICK RECOVERY.
When you put back the battery, does the phone start? If it does then remove it and wait a little longer and try. It should work, it has worked for me. Plus If it shows in rsdlite you can try flashing to stock.

hotdog125 said:
THE BLUE LED ONLY COMES WHEN CUSTOM RECOVERY IS INSTALLED.
SEE GOOGLE ON HOW TO ENTER STOCK RECOVERY. IF YOU MANAGED TO USE RSDLITE THEN I'M SURE YOU CAN GO TO STICK RECOVERY.
When you put back the battery, does the phone start? If it does then remove it and wait a little longer and try. It should work, it has worked for me. Plus If it shows in rsdlite you can try flashing to stock.
Click to expand...
Click to collapse
Problem solved, Hardware problem, or to be more precise a build up of dust ( fine sand??) behind the volume rocker after a strip down nd clean it worked.
end result defy now running.

Defy won't start

I have a problem with my Motorola defy(non+). After i installed by mistake Android 4.4 with kernel 3.0 by Quarx, my defy wouldn't boot into the OS.
Tried to install another ROM but it ran into a problem and failed. Tried to install after that a new SBF because i don't know why the recovery menu was not there anymore.
Suddenly, after it finished, i noticed the phone won't power up anymore. It happened to me 2 times in the past and just adjusting the charger end into the phone carefully worked and i could power on the phone and install a different sbf and solve the problem but now it's different.
The phone won't power up with that method again.
When i connected the phone into the laptop the white led appeared, but without powering it on, RDS lite identified the device.
I installed a froyo 2.2.2 CEE sbf succesfully(it said) but it doesn't power up and now RDS lite doesn't recognise it either.(LED still works though)
What can i do?

urbanrazor said:
I have a problem with my Motorola defy(non+). After i installed by mistake Android 4.4 with kernel 3.0 by Quarx, my defy wouldn't boot into the OS.
Tried to install another ROM but it ran into a problem and failed. Tried to install after that a new SBF because i don't know why the recovery menu was not there anymore.
Suddenly, after it finished, i noticed the phone won't power up anymore. It happened to me 2 times in the past and just adjusting the charger end into the phone carefully worked and i could power on the phone and install a different sbf and solve the problem but now it's different.
The phone won't power up with that method again.
When i connected the phone into the laptop the white led appeared, but without powering it on, RDS lite identified the device.
I installed a froyo 2.2.2 CEE sbf succesfully(it said) but it doesn't power up and now RDS lite doesn't recognise it either.(LED still works though)
What can i do?
Click to expand...
Click to collapse
Try wiping data and cache in the stock recovery. To get into the stock recovery, power off the phone, hold in the volume- button then also press and hold the power button. After a few seconds you should see a triangle with an exclamation mark in the middle, and a little green android guy below that. Then press the volume+ and volume- buttons at the same time, and a menu should appear. Use the volume buttons to navigate the menu, and the power button to select an option. Select "wipe data/factory reset" and also "wipe cache partition". Then try to reboot the phone.
If the phone still won't boot, go into bootloader before connecting to RSD lite. To go into bootloader, power off your phone, then hold in the volume+ button and the power button at the same time. After about 5 seconds, release the buttons. The bootloader should display – it will show the version and a battery check. (If that doesn’t work, pull the battery, then put it back in while holding the volume+ and power buttons.) Then connect USB cable and use RSD Lite to flash sbf again.

Hi. So i kinda repaired my defy but it still has a problem. It does not want to charge without using MCGyver method. Everything else works fine, except the phone does not detect my battery so instead it shows a question mark. BTW i deleted by mistake the sbf but i know it was chinese. Only that sbf worked. Could you find me a good working sbf?