Help...Problem with default keyboard - Nexus 7 Q&A, Help & Troubleshooting

Hi I have just bought a 32G Nexus 7 and have stumbled across a really annoying problem. When using the on screen keyboard in some apps, I cant enter an @ symbol. It is nowhere on the keyboard. It does however appear on the keyboard in the most apps.
I noticed it when using a remote control app for my WDTV, I needed to enter my email address into a field, but the @ key was missing. It used the same keyboard that is used when typing an address into chrome. (If you check that one out you will see what I mean)
Is it possible to force an app to use a particular keyboard? I went through all the available options and couldn't seem to fix it.
Thanks for any advice.
Tom

Related

Can't change keyboards?

My girlfriend has an Aria, and recently tried to install a new keyboard. We went into the keyboard settings and checked the new keyboard, but whenever the new keyboard comes up, it's the stock HTC one. Has anyone else experienced this?
You have to long press in a text box then choose input method you can then choose the new keyboard there
Sent from my Liberty using XDA App
yes, although you enabled the new keyboard, you didn't choose it as your default keyboard.
open something where you can type (text message, note, browser address bar, whatever). press in the text area and hold your finger there until a box pops up. this box should have your keyboard options, select whichever you would like to use.
I am still trying to figure out how to get a keyboard with voice options so i can talk into it
mikehe said:
I am still trying to figure out how to get a keyboard with voice options so i can talk into it
Click to expand...
Click to collapse
The stock Aria keyboard has a microphone icon on the bottom left. Press it and it will enable voice recognition.
Note: only works whilst connected to the internet.
If you can get your hands on a copy of the newest swype that
has the option for audio input as well. Not sure if the beta is still open or not.
Sent from my Liberty using XDA App

Stock keyboard activation

I know I have seen this discussed but my searches didn't find them so I am asking now.
I was trying to complete a form in a website this morning but I couldn't get the standard keyboard to pop up. Has anyone found a way to do this? By the way, I am trying to use the stock browser as well.
Thanks.
Sent from my Xoom using XDA App
So I take it when you click/touch on a form field, the cursor appears but the keyboard does not?
Try going to Settings >> Language & Input >> Under "keyboard Settings", chose "Current input method" >> Then select "English (US) Keyboard."
Give that a try and see if that works.
please delete. posted wrong place.
Thanks for the tip. That is my default. I was hoping there would be a manual method for bringing the keyboard up.
Sent from my Xoom using XDA App
OracleBlue said:
Thanks for the tip. That is my default. I was hoping there would be a manual method for bringing the keyboard up.
Sent from my Xoom using XDA App
Click to expand...
Click to collapse
Are you looking for some kind of keystroke/tap that brings up the keyboard whenever? The only thing I know of that brings up the keyboard is clicking on a text entry box or something else that will take text. Some applications(like a remote desktop client) have a menu option to bring up the keyboard, but as far as I know there isn't really a way to just "summon" the keyboard when it isn't needed.
Have you used a bluetooth keyboard lately? I notice that, unless you have the settings right, even when the bt keyboard is off, sometimes no onscreen keyboard comes up.
No. I've not used a Bluetooth keyboard. I am trying not to need one.
Yes. I was hoping I could have a keystroke to bring it up. The application I was trying to enter text in is a Yahoo crossword puzzle. I do those when I am bored and just tried it Friday. The puzzle comes up nicely but one cannot enter text into the grid.
Thanks
Sent from my Xoom using XDA App

Use physical keyboard and onscreen keyboard at the same time

I have a Bluetooth bar code reader connected to the tablet and it shows up as a physical keyboard. It works great to scan information into text fields. The issue is that the onscreen keyboard doesn't show up if it is connected. Does anyone know a way to have both the onscreen keyboard show up and have a physical keyboard connected? When i googled for answers I found someone with the same issue on there zoom with 4.1 installed, they said the onscreen keyboard would still pop on 4.0 but not on 4.1 (I searched for an app that might allow this and came up with nothing )
Multiple keyboards on android 4.1
boothmaster said:
I have a Bluetooth bar code reader connected to the tablet and it shows up as a physical keyboard. It works great to scan information into text fields. The issue is that the onscreen keyboard doesn't show up if it is connected. Does anyone know a way to have both the onscreen keyboard show up and have a physical keyboard connected? When i googled for answers I found someone with the same issue on there zoom with 4.1 installed, they said the onscreen keyboard would still pop on 4.0 but not on 4.1 (I searched for an app that might allow this and came up with nothing )
Click to expand...
Click to collapse
Settings > Language & input > Default, switch the "Hardware" property to Off. works for me on Android version 4.1, It let me have both of the input types, but I have to set up this configuration every time it gets connected. Hope it helps.

How to close Amazon FireTv system on-screen keyboard using K400R.

Today I noticed that when you try to go to forums and type in your user name and password, you can only type in one field. Its pretty annoying... So today I was just pressing buttons trying to back out of the on screen keyboard and sure enough.
On the Logitech K400r, you need to hit the blue Fn button and F7. That will drop the on-screen keyboard away thus allowing you to type in your password after your user name, click on other on-screen fields etc.
Hopefully this will help someone else, as that on-screen keyboard is an eye sore...
If it helped, hit Thanks!
I have same as what you have been encountered the annoyed on-screen keyboard.
Im using Logitech k700 (I think) with trackpad built-in.
I haven't tried use null keyboard
https://play.google.com/store/apps/details?id=com.wparam.nullkeyboard
Problem is that Amazon fire tv doesn't have input selection and it may be will not working with the null keyboard.
yeah I did see it, but I also heard that it can break the other keyboards... The F6 trick works great! I also just installed Tapatalk and that makes my forums come thru perfect. Im using my K400r now, typing through the Amazon FTv on-screen keyboarrd seemlessly...
Has anyone found a way to do this without one of these keyboards? That pop up keyboard makes me want to throw my fire tv through the window. If there is a way to get to the full android settings, I'm sure it could be done.
There is a settings.apk that can be sideloaded,but I don't know if you can install null keyboard without root since the unknown sources issue in tween updated users.
If you are stuck without root on the latest of firmwares,you can install apk files from unknown sources without root since Amazon nicely enabled it,but I still don't know if null keyboard will install.
I'm rooted, but I hadn't heard of the settings apk. I'll have to look that up. I know on another android device there is a built in option to hide the on screen keyboard when an external keyboard is plugged in.
Here is one of the topics.
I hope the file is still available after all this time.
http://forum.xda-developers.com/showthread.php?t=2714494
I hate modern browser "intuitive" website linking which removes the much needed http for link posting to work.

Software behind the hardware keyboard

So I have found the keyboard to be somewhat fraustrating. Not because it is virtual, but because of the software behind it.
First of all, it is rather strange that you cannot set more than one keybaord. Essentially, the device can have two keyboards that you might regularly swap between: the hardware keyboard and the one screen keyboard one might use while in tablet mode. The hardware keyboard uses the autocorrect of the keyboard you have set as your software keyboard. You cannot set seperate keyboard engines for the hardware and software keyboard.
As I said, the autocorrect/engine behind the hardware keyboard is dependant on your choice of software keybaord. However, as far as I can tell, only the defualt TouchPal keyboard provides any autocorrect for the hardware keybaord. The stock android keyboard offers no autocorrect with the hardware keyboard.
On a related note, TouchPal is awful. The autocorrect works pretty badly and is basically very annoying to use. I won't bore you with the details, but things like autocorrecting to a new word when you go back to edit a mistake. This makes it almost unusable.
Also the touch pad is very bad. No two funger scrolling means that again, it is pretty much useless.
I think the Yoga Book is a great device in most respects. Its intersting that all of these problems relate to the software and could potentially be fixed by Lenovo or there may even be fixes out there now.
Has anyone found any solutions to these problems? Thanks, Liam
I completely agree with you and am having the same frustration with the software behind the keyboard. So far the best solution I have found is to use SwiftKey or Swiftkey Beta (not sure which is best yet). With a bit of tweaking you can get decent auto complete and auto correct using both the halo and on screen keyboard. Much better than Touchpal at least. A couple of issues I have found using Swiftkey and halo keyboard: 1) auto complete seems to turn off when resuming from sleep mode (tapping the keyboard button on the top row reactivates it) 2) in WhatsApp Tablet app, after pressing Enter to send a message, the next message gets double words - I. E. Auto correct adds to what you type, doesn't replace it.
I can confirm that switching to SwiftKey makes the hardware keyboard usable! I'm actually using the keyboard to type this now. Naturally, I'm making tons of mistakes but it is catching and correcting almost all of them!
Can confirm that SwiftKey easily switches between physical keyboard and on-screen keyboard when the physical keyboard is toggled on and off.
If anyone is still using the default software keyboard, switch now!!!
Thanks for the tip! This makes a big difference! Have either of you found a way to get auto capitalise to work? The setting is enabled but it doesn't do anythig.
My issue with SwiftKey is that there is no good ways to select a suggested word. You always have to click with your finger on the screen which completely ruins ten finger typing for my.
So I ended up with disabled word correction as it's faster to remove some mistyped words and type again, than to click on the screen.
How do you handle suggestions made by SwiftKey?
faeArai said:
My issue with SwiftKey is that there is no good ways to select a suggested word. You always have to click with your finger on the screen which completely ruins ten finger typing for my.
So I ended up with disabled word correction as it's faster to remove some mistyped words and type again, than to click on the screen.
How do you handle suggestions made by SwiftKey?
Click to expand...
Click to collapse
I have found that SwiftKey enters the main suggested word when I press space. This is good for most of the time, but annoying when:
-I want to select a suggestion that is not the main suggested word (particularly a new word that it doesn't recognise)
-I want to add punctuation directly after the main suggested word (here, because I input the punctuation rather than pressing space, the suggested word is not entered)
I have certainly found using SwiftKey to be the best experience. It's quite a passive autocorrect that doesn't get in the way too much. I got so sick of TouchPal which really gets in your face with its incorrect predictions.
But still there is a lot of room for improvement. It's such a shame that it's terrible software that lets down this keyboard. In particular I don't understand why:
- Some keyboards (like the Google Keyboard) don't offer any correction or prediction when enabled. Does Android maybe treat the Halo keyboard as an external keyboard (which I suppose you wouldn't want predictive features for)?
- Keyboards that do offer prediction don't seem to respond to changes to their settings (I can't get SwiftKey to auto capitalise the first letter of a sentence for example). @thespinner02 mentioned tweaking with SwiftKey settings- I assume they meant for the onscreen keyboard because these settings don't do anything for the Halo keybaord.
I wonder whether there is a keyboard out there in the Play Store that works better with the Yoga Book. I'll try a few and let you guys know if I find one.
I tried several solutions but couldn't find anything good. Hardware keyboards are not that common on Android platform, I guess.
Even using Swiftkey I sometimes get different results depending on the app being used. Auto capitalise is working OK for me, in Word for example.
There are specific options in Swiftkey for Physical Keyboard: in settings, Typing, Voice & Other Input. In Physical keyboard section I have Autocorrect and Auto capitalize on. Everything else off.
thespinner02 said:
Even using Swiftkey I sometimes get different results depending on the app being used. Auto capitalise is working OK for me, in Word for example.
There are specific options in Swiftkey for Physical Keyboard: in settings, Typing, Voice & Other Input. In Physical keyboard section I have Autocorrect and Auto capitalize on. Everything else off.
Click to expand...
Click to collapse
Thanks! I didn't notice that- smart spacing etc makes a massive difference!
Pretty much my only problem with SwiftKey now is that it sometimes creates its own weird textbook instead of typing directly into the text field. But that's not a massive problem.
Also I sometimes accidentally change input method. Maybe I'm using a keyboard shortcut by mistake?
thespinner02 said:
Even using Swiftkey I sometimes get different results depending on the app being used. Auto capitalise is working OK for me, in Word for example.
There are specific options in Swiftkey for Physical Keyboard: in settings, Typing, Voice & Other Input. In Physical keyboard section I have Autocorrect and Auto capitalize on. Everything else off.
Click to expand...
Click to collapse
In settings for hardware keyword I get no harder key found?
Went into Swift settings in onscreen. How to get settings for Halo?
With Yoga Book in laptop mode. Settings / Language & input / SwiftKey Keyboard / Typing / Voice & Other Input
You also need to make sure 'show input method' is not enabled in the keyboard settings/selector popup.
Does anyone else experience a problem with SwiftKey where in some text fields your text goes into a little popup text box at the bottom of the screen as well as the intended text field? And then to get rid of the popup text box you have to tap 'next'. This occurs in the Facebook messenger app for example.
Any way to disable it?
It seems to do this when the text field is small, but other keyboards just expend the text field as you type. The popup text box it creates doesn't expand anyway, so it doesn't offer extra functionality and is just an annoyance.

Categories

Resources