HI to all...
My galaxy y s5360 doesn't on recovery mod after installing jellyblast...so, i tried odin, this also not helps me...
Finally, i tried this odin method
https://www.youtube.com/watch?v=W3cWV_E18Cc
And now, my phone fully bricked, there is no sigh....always dead screen, even i connect to the charger and to the lap.....
Please help me guys..........
Recovery mode..
No prob..
Is download mode workin?
rooting is new for me...and i am noob to root...
menewtoroot said:
Recovery mode..
No prob..
Is download mode workin?
rooting is new for me...and i am noob to root...
Click to expand...
Click to collapse
HI,
i said, there is no sign for anything...its always dead on pressing any keys..."display is always black"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
venkiaries61 said:
HI,
i said, there is no sign for anything...its always dead on pressing any keys..."display is always black"
View attachment 1477542
Click to expand...
Click to collapse
You need to take your phone to service center....
Akash vibhute said:
You need to take your phone to service center....
Click to expand...
Click to collapse
Or you could make a USB Jig. Search on XDA about it. It's a way to recover hard-bricked phones.
||I'm just a PM away for help||
Lol Simply flashing a Rom won't give you hard bricks it should be soft brick ! Make a jig and try !
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
Also i would like to clarify one thingid you enter download mode and flash stock with Odin before bricking because you said even Odin didn't help !
Hey try this http://forum.xda-developers.com/showthread.php?t=1498327 it really helped me once when i flashed a wrong kernel (galaxy fit's kernel) on my SGY , so try if it works give feedback:good:
All the best may ur phone gets recovered , before this joyfull night of Diwali!!!!!!!!!!!:laugh:
Please help me guys....
anasdcool71 said:
Or you could make a USB Jig. Search on XDA about it. It's a way to recover hard-bricked phones.
||I'm just a PM away for help||
Click to expand...
Click to collapse
I saw that in jig method, some hardware is connected in micro usb..i don't know what it is ....
nikufellow said:
Lol Simply flashing a Rom won't give you hard bricks it should be soft brick ! Make a jig and try !
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
Also i would like to clarify one thingid you enter download mode and flash stock with Odin before bricking because you said even Odin didn't help !
Click to expand...
Click to collapse
Thanks for your words...its really make me to think cool...Yes, i bricked my phone by doing odin flasing...see the video in first post...that method only makes this...
shivamsejal said:
Hey try this http://forum.xda-developers.com/showthread.php?t=1498327 it really helped me once when i flashed a wrong kernel (galaxy fit's kernel) on my SGY , so try if it works give feedback:good:
All the best may ur phone gets recovered , before this joyfull night of Diwali!!!!!!!!!!!:laugh:
Click to expand...
Click to collapse
Is that surely hard brick working...i used that, but no use....
My phone is fully dead...What i am trying to say is, there is no reaction in the phone, on pressing any button....My battery having charge...
Just imagine what would be the phone if you didn't attach the battery...Please help me guys regarding to this...i am sure that i clearly said my situation...
Make a jig ! Search YouTube for how to videos and you will understand its easy !
Tell me if this how you say you've bricked :
Flashed stock via odin
Flashed jb via cwm
And then hard bricked ? Right ?
nikufellow said:
Make a jig ! Search YouTube for how to videos and you will understand its easy !
Tell me if this how you say you've bricked :
Flashed stock via odin
Flashed jb via cwm
And then hard bricked ? Right ?
Click to expand...
Click to collapse
HI, its really a long story..
1.i tried to install jellybast, and successfully installed after some tries...
2.i install cosmic flow live wallpaper, then phone gets collapsed..
3.then i try to install jellbast again, nothing works..
4.then i try flash via odin, then i lost my recovery mod..
5.then i try flash via odin which include pit and boot loader, then i lost everything...fully dead...
thanks for your reply..now, will try jig method....and will post my result asap...
nikufellow said:
Make a jig ! Search YouTube for how to videos and you will understand its easy !
Tell me if this how you say you've bricked :
Flashed stock via odin
Flashed jb via cwm
And then hard bricked ? Right ?
Click to expand...
Click to collapse
Hi,,,please, i don't like to further damage my phone by doing any stupid works by me..so, please, suggest me the right way by giving the exact video link please....
venkiaries61 said:
Hi,,,please, i don't like to further damage my phone by doing any stupid works by me..so, please, suggest me the right way by giving the exact video link please....
Click to expand...
Click to collapse
Lol with jig you won't cause your device any more damage either it will get into download mode or not ! But i still can't understand how you bricked it answer my questions in the above post !
---------- Post added at 02:15 PM ---------- Previous post was at 02:13 PM ----------
And i am on mobile so can't give you links atm but am sure that you can find it easily if you search xda or Google
nikufellow said:
Lol with jig you won't cause your device any more damage either it will get into download mode or not ! But i still can't understand how you bricked it answer my questions in the above post !
---------- Post added at 02:15 PM ---------- Previous post was at 02:13 PM ----------
And i am on mobile so can't give you links atm but am sure that you can find it easily if you search xda or Google
Click to expand...
Click to collapse
If you have galaxy y, then i can assist you to get hard bricked, this will surely helps you to understand clearly...lolll..just kidding....
The main step that makes my phone brick is...i tried to flash stock rom via download mode in odin, with pit and bootloader files...flashing failed then my phone also dead....
venkiaries61 said:
If you have galaxy y, then i can assist you to get hard bricked, this will surely helps you to understand clearly...lolll..just kidding....
The main step that makes my phone brick is...i tried to flash stock rom via download mode in odin, with pit and bootloader files...flashing failed then my phone also dead....
Click to expand...
Click to collapse
As far as I know you should always leave bootloader field untouched. Hope you fix your phone.
Sent from my GT-S5360 using xda premium
Mitko said:
As far as I know you should always leave bootloader field untouched. Hope you fix your phone.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
HI....Sorry, i don't know about that risks...i just follow the you tube video as it is working for the you tube video creator.....But, it doesn't works for me....
Now, i lose my hope....What can i able to do without recovery mode and download mode...I saw some videos about jig method by getting tips from niku, but i didn't get that hardwares to do so...
venkiaries61 said:
If you have galaxy y, then i can assist you to get hard bricked, this will surely helps you to understand clearly...lolll..just kidding....
The main step that makes my phone brick is...i tried to flash stock rom via download mode in odin, with pit and bootloader files...flashing failed then my phone also dead....
Click to expand...
Click to collapse
See for yourself what you posted in the title thread you have never mentioned that you used pit or boot loader - this is what i was asking also because simply flashing stock with Odin or JB won't give you hard bricks !
You shouldn't use pit and all unless you know what you are doing !
Try jig but if this is a hard brick it won't help !
Do you have warranty ? If yes go to Samsung service centre and play dumb !
venkiaries61 said:
HI, its really a long story..
1.i tried to install jellybast, and successfully installed after some tries...
2.i install cosmic flow live wallpaper, then phone gets collapsed..
3.then i try to install jellbast again, nothing works..
4.then i try flash via odin, then i lost my recovery mod..
5.then i try flash via odin which include pit and boot loader, then i lost everything...fully dead...
thanks for your reply..now, will try jig method....and will post my result asap...
Click to expand...
Click to collapse
2) There's NO way that your phone would "collapse" due to installing live wallpaper/ANY app that doesnt involve data wipe or modifying the kernel values..
3) What do you mean by nothing works? Did it get stuck at boot?
4) Well, did you flash it correctly? Which stock Firmware package did you take?
5) Including PIT and BOOTLOADER does NOT make a phone hard brick unless you use another phones bootloader/PIT. I made a lot of flashing with PIT, bootloader and repartition, this isnt the cause of your problem.
You must have taken another phones stock ROM packages/bootloader or using wrong method to flash the stock ROM, there's no way your recovery could be "lost" or your phone hard bricked by using correct firmware packages and flashing correctly.
nikufellow said:
See for yourself what you posted in the title thread you have never mentioned that you used pit or boot loader - this is what i was asking also because simply flashing stock with Odin or JB won't give you hard bricks !
You shouldn't use pit and all unless you know what you are doing !
!
Click to expand...
Click to collapse
Nope, using PIT/bootloader does NOT cause any problems. Its just not recommended as people could hard brick their device choosing wrong bootloader/pit. I always flash my STOCK roms (done like 30-40 times) using PIT, Bootloader and repartitioning. Its NOT the issue. The OP must have used the wrong stock firmware packages or using bootloader/pit of another phone
Sorry venkie now i have seen your post ! Damn tapatalk i missed it earlier !
Okay tell me from where you got the pit file ?
For jig all you need is a usb male - cut it out from some old data cables and 3x 100k +1k resistors . Peel off the usb male and connect the resistors in series with 4and 5 pins of the male - done ! Plug it in !
nikufellow said:
Sorry venkie now i have seen your post ! Damn tapatalk i missed it earlier !
Okay tell me from where you got the pit file ?
For jig all you need is a usb male - cut it out from some old data cables and 3x 100k +1k resistors . Peel off the usb male and connect the resistors in series with 4and 5 pins of the male - done ! Plug it in !
Click to expand...
Click to collapse
Hi, niku...no need to say sorry...
Oh god..i didn't have any knowledge about electrical applications.....Is samsung service centre do flash my mobile or not,, i am ready to pay for it..no need to care about warranty..is this possible niku?
hitme987 said:
2) There's NO way that your phone would "collapse" due to installing live wallpaper/ANY app that doesnt involve data wipe or modifying the kernel values..
3) What do you mean by nothing works? Did it get stuck at boot?
4) Well, did you flash it correctly? Which stock Firmware package did you take?
5) Including PIT and BOOTLOADER does NOT make a phone hard brick unless you use another phones bootloader/PIT. I made a lot of flashing with PIT, bootloader and repartition, this isnt the cause of your problem.
You must have taken another phones stock ROM packages/bootloader or using wrong method to flash the stock ROM, there's no way your recovery could be "lost" or your phone hard bricked by using correct firmware packages and flashing correctly.
Nope, using PIT/bootloader does NOT cause any problems. Its just not recommended as people could hard brick their device choosing wrong bootloader/pit. I always flash my STOCK roms (done like 30-40 times) using PIT, Bootloader and repartitioning. Its NOT the issue. The OP must have used the wrong stock firmware packages or using bootloader/pit of another phone
Click to expand...
Click to collapse
HI, hitme...
In the first post of this thread contains all details that i do..see the youtube video that i followed..the page contain pit and bootloader files...
By the way, i already bricked...please give me some possible solutions....
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I try to update this to the new version.But when i already flash the Stock rom,i want to flash again with the kennel 4.00,IT fail!
But i dont know where is the mistake i do ,Can someone in xda please help me to solve this kind of question?I can't connect to my computer,and i want flash this2.3.6 also can't.My rom still 2.3.3 only...
Please someone help me...
can anyone please help me to solve this question and how to upgrade to the newest version?
Arios_tab said:
can anyone please help me to solve this question and how to upgrade to the newest version?
Click to expand...
Click to collapse
P1000 or P1010?
ps: dont worry, i got this simbol on my tab and i restore.
http://forum.xda-developers.com/showthread.php?t=1440924
Do pot post [Q] Question thread in General section.
There is a Q&A section.
samcortez said:
P1000 or P1010?
ps: dont worry, i got this simbol on my tab and i restore.
Click to expand...
Click to collapse
mine one is PT1000.
But can i ask i got this type of symbol is why?then how i cant connect with my computer,i scare later my tab will running out the battery..
priyana said:
http://forum.xda-developers.com/showthread.php?t=1440924
Do pot post [Q] Question thread in General section.
There is a Q&A section.
Click to expand...
Click to collapse
I am sorry because i broken the rule,yet i am scare because my tab cant restore.
Guys,i am really crazy,i try whole day,still cant find solution...
I really never heard of a PT-1000. So it is really a risk to advice you.
But if you haven't and willing to try, try out the method for Overcome 4.1 ROM
it is for P1000 GSM though.
you can head to the Dev section, or directly to www.teamovercome.net
go the guide section, their image is broken, so you can get a cached copy of the guide here:
http://forum.xda-developers.com/showthread.php?p=20974872
Fully charge your tab for 4hrs, just let it plugged in even if no battery icon,
then attemp to flash the GB Stock Safe rom via Odin
If you can then boot it up, then all good.
thank for ur help,i am trying to fix it up.But when i try to charge this,no symbol come out..
no the symbol phone cant connect with computer ,i don't sure is my cable is broken or good?
Sent from my GT-S5360 using XDA
strange. I read that the symbol is just another download mode.
You should be able to connect using Odin.
For charging you just let it plugged to wall charger for long hours, I think.
does the tab charge when you connect it to the computer? if not, you need to try a different cable.
if it does, try reinstalling the drivers
How to say it is charge or not?WHen i plug in to computer,and nothing to show out.I dont know what happen to this,then i want to check also confuse,how check this.
Is that like when we got the symbol,then the tab will show something like the symbol in the picture i post before?
priyana said:
strange. I read that the symbol is just another download mode.
You should be able to connect using Odin.
For charging you just let it plugged to wall charger for long hours, I think.
Click to expand...
Click to collapse
I know that is another download mode,but last time i got try and success to restore back,but this time i dont know what cant connect with my computer.
I've had that symbol before and managed to restore my Tab.
Do you have Odin?
If yes, make sure your Tab is charged - it should charge, you just won't see any progress.
When charged, connect it to your PC. It might not show up in Odin immediately (with the yellow box) but after a bit, if the drivers are there, it should show up.
Then you need to follow the Team Overcome guide and flash the .pit file, the GB Stock .tar and the modem file for your Tab.
If it doesn't show up after a while on Odin, I believe I opened Kies and restored the drivers. I think you can do this even if the Tab is in the state you have it.
Your Tab is soft-bricked, it is recoverable. Read KOsh's thread for reassurance. Good luck!
treb1971 said:
I've had that symbol before and managed to restore my Tab.
Do you have Odin?
If yes, make sure your Tab is charged - it should charge, you just won't see any progress.
When charged, connect it to your PC. It might not show up in Odin immediately (with the yellow box) but after a bit, if the drivers are there, it should show up.
Then you need to follow the Team Overcome guide and flash the .pit file, the GB Stock .tar and the modem file for your Tab.
If it doesn't show up after a while on Odin, I believe I opened Kies and restored the drivers. I think you can do this even if the Tab is in the state you have it.
Your Tab is soft-bricked, it is recoverable. Read KOsh's thread for reassurance. Good luck!
Click to expand...
Click to collapse
LOL.
Hello,my friend.Finally,is the problem of the cable.
huhhuh,I go buy an new one,and connect it,now already can use.And thanks for you all because of you,then i can function my tab again.
ps:What is the rom then can give my tab to the highest performance?
Because i am really dont know how to get a good rom.
Like what trib said, Overcome is a good rom.
Sent from my GT-P1000 using XDA
priyana said:
Like what trib said, Overcome is a good rom.
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
But what i still confuse is,i still fail in flash the kernel 4.00...
make sure it is the .tar file not .zip file when you are using Odin to flash Overcome kernel 4.0
It is just a kernel, how could you fail to flash it.
I suspect bad download.
Download again and compare the sha1 checksum.
priyana said:
make sure it is the .tar file not .zip file when you are using Odin to flash Overcome kernel 4.0
It is just a kernel, how could you fail to flash it.
I suspect bad download.
Download again and compare the sha1 checksum.
Click to expand...
Click to collapse
I dont know,but i am download from the link of overcome website.
Am that need bootloader first or root first,just can root and flash the kernel.I saw from the tutorial of http://www.teamovercome.net/ ,there doesn't wrote need root then just can flash the kernel.SO i am confuse...
PS:some of the thought of me when using the 2.3.3 .
I am using the 2.2 froyo before.I feel that when i upgrade,that some place not good then the 2.2,because i am playing the <fruit ninja> and <restaurant story>.I found it is very laggy one,and sometime i am playing the restaurant story and i need to force restart when i just collect the money only.
so i wanna ask what version can be use and run very nice in my tab?
priyana said:
make sure it is the .tar file not .zip file when you are using Odin to flash Overcome kernel 4.0
It is just a kernel, how could you fail to flash it.
I suspect bad download.
Download again and compare the sha1 checksum.
Click to expand...
Click to collapse
I am download complete and right because i am using the link which XDA give.
So got another problem of that?
Why?
This Thread Is For Them Who Bricked There Phones
Don't start a new thread for your bricked phone & post here.
We will help you with every possible solutions.
Here are some quick tips :
(Here I'll use the terms like Download-Mode & Recovery-Mode, If you dont know what are they please click here. There "BOOT to RECOVERY" & "BOOT to BOOTLOADER" means how to enter into Recovery-Mode & Download-Mode respectively.)
A Bricked Phone May Have One or More (Below Problems) :
1. Booting to the ROM(Android) not possible.
2. Booting to the Recovery-Mode not possible.
3. Black screen or Bootloop(Repeated Restarting of Phone at Boot Animation or Samsung Galaxy Y Logo).
Possible Solutions :
(Remember there'll be data loss using these solutions so always try to keep a backup)
1. If you can still enter into Recovery-Mode
(a). Try to clear Data & Cache then check.
(b). Try Installing a Custom ROM using CWM(ClockWorkMod Recovery) & check.
(For Custom ROM & CWM Visit here.)
2. If Recovery-Mode didn't helped Enter into Download-Mode & flash an odin supported stock rom(using ODIN 1.84 or 1.85) from Doky73's Thread(Flashing Guide in 2nd post).
*You can inform me, if anything left out.
Note :
1. I'll be not held responsible for anything that happens to your phone.
2. Before posting try to search for similar type problems out there & try the solution, if that doesn't solve your problem then post here.
Make this a sticky.. there are many users who say that their phone is bricked
help! bricked SGY
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
jmpotter said:
galaxy y bricked
i bricked my sgy last 3 weeks.
here's what i did.
-installed creedsix rom.
-installed UOT kitchen Themes.
-wipe data
problem
-stuck in bootlogo
-softbricked.
-cant go to recovery mode
-flashed too many times, still stuck in bootloop
i flashed at least 20 times, with different firmwares.
but still no luck, still boot lop.
my professor said something about secondary bootloader that might help. but i had definitely no idea what it is.
i asked some techies on the mall, and they said that this phone must undergo the JTAG process. but it cost $20.
help me. thanks.
Click to expand...
Click to collapse
can you go to download mode??
(try pressing volume down+ home button + power button all at the same time)
if it still can, then your SGY is still good
go to this ---> thread
and just flash your country's firmware
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Millan.SIS said:
From where you got the firmwares.... How you flashed...
Ever tried re partitioning.... Ever flashed boot loader....
For info... Jtag or boundary-scan is used for testing & servicing high technology electronic boards...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
static28 said:
just for info, jtag will not fix the problem. IT IS SCANNING.. like trouble shooting.
that only means that those technicians are pretending to be well educated but the truth is that they only wanted to get some cash out of your pocket.
Click to expand...
Click to collapse
ya, that's what those wannabees really do..
Sent from my GT-S5360 using Tapatalk 2
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
kurotsugi said:
this one will a little bit off topic...what is creedsix?is it a rom for SGY?
if the phone still can boot that means everything is fine. pull out the battery, wait 10 seconds, reinsert the battery, do three magic combo button, you'll enter recovery mode. don't worry about our bootloader. our bootloader is stored in different partition thus installing any custom rom won't affect our bootloader. as far as i know, there is only one person who have messed up with bootloader and got an ultimate hard brick.
Click to expand...
Click to collapse
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky73. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
edit: I didn't to offend him but I think I've mispelled doky's username. edited.
manoranjan2050 said:
Really its great thread ........ Many many thanks for helping ppl ......
is it possible repair hard brick ..... what is hard brick... if device hard brick device gos life time dead ??
Sent from my GT-S6102 using xda premium
Click to expand...
Click to collapse
whatever It may be... You should never mess up with bootloaders, if you don't actually know what's there significance...
Brief description on android starting process :
pbl(primary boot loader "boot.bin") executes first and then it executes sbl ...
Sbl(secondary boot loader "sbl.bin") is responsible for responding to combos...download mode.. Intercepting odin commands..... booting system...booting kernel.... Charging your battery while switch off... Etc etc
Harm anyone of them... And Your phone goes into lifetime hibernation, Hard-bricked.
Sent from my GT-S5360 using Tapatalk 2
thanks for the big info friend...... so hard bricl is mot repairble ......
Sent from my GT-S6102 using xda premium
my device might be bricked, can you please help me out
Hi to all, it's only my second post but i have a major problem with my samsung s-5360. it's won't boot anymore, but it can enter cmw and recovery. This is what i did wrong i believe. At first i installed morocs 1.8 kernel on creed fusion version 3.1 and it wouldn't boot anymore, so i ended up using a back-up i made before with cmw. And it worked well and phone was booting again and was on stock again. ( because back-up was made with stock-version obviously )
Then i thought: well let's try repensis noob version. And installed it and there was also an update 2 and installed it over it as well before booting the os, maybe this is what i did wrong dunno .. But afterwards it didn't boot anymore and whatever i tried, restoring one of the 3 images i made, or using one of the roms posted here like Creed fusion 3.1 rom or Aurora 2 nor Chobits didn't work.
I also tried reverting to stock with odin 1.85 but when i connected my phone via usb to the pc, odin didn't see my phone. ( after selecting the 3 tar files in odin ) Maybe i'm doing wrong something there.
What i also have to add is that when doing factory wipe in recovery it says formatted E: but unable to format E:\dev10 and dev11. clearing cache is no problem and also cleared dalvik cache. Can you please help me out ? I know, it sounds very noobish but well, i have to face it because can't do it myself without help anymore it seems ... Thanx a lot in advance.
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Thanx a lot for responding ! I only used kies for connecting my phone because i couldn't find a driver for it, and had to disconnect it, but i will search for it again now and hopefully it will work now. i have to go now and return back in three hours. i'm very curious ! i'll come back in a couple of hours and gonna tell if it worked out of course
kurotsugi said:
a hard brick is when our device doesn't respond to power button.
the guy that I've mentioned above is doky77. he accidentally flash a bootloader for sgs2 into his sgy. last time he said that he send his sgy to samsung service center and buy a new one. I'm not sure if samsung has revived his sgy.
Click to expand...
Click to collapse
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Doky73 said:
to be precise: the guy was Doky73...
I was playing with different revisions of SBLs because on SGS2 some old SBL gives the possibility to reset custom bin counter via JIG. At a given point accidentally browsed SGS2 bootloader instead of SGY one...
But I did perfect job, the service center wasn't able to detect the cause of bricking, but they recovered my phone under warranty. (I think they're not reading this forum )
Click to expand...
Click to collapse
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
ops...my mistake. I guess I'm too sleepy when was typing your name. I'll edit it. sorry.
manoranjan2050 said:
Thanks friend.............
if i install some custom rom custom kernel via odin or CWN its gos to hard brick ???
in odin re-partition option for why ............ its disbl by default if i enable it wats problem........
dear friend if u have any odin full tutorial /guide /ref please provide me for learn syep by step one by one option or problem......
Click to expand...
Click to collapse
if u flash something through odin or cwm then you wouldnt hard brick ur phone.. it would be just a temporary brick which can be easily revived... i dont know abt that partioning thing
Sent from my GT-S5360 using XDA
kurotsugi said:
please make sure that you've installed the driver and plug the usb to computer only on download mode when flash with odin. dev10 and dev11 are the partition for data and cache. that error means something was wrong with your recovery mode. you'll need to install a fresh stock rom with odin.
Click to expand...
Click to collapse
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
---------- Post added at 02:35 AM ---------- Previous post was at 01:47 AM ----------
mickeyindahouse said:
Hi, there i am and sry for disturbing you again or someone else but i managed to install a non kies usb driver and i'm flashing thru odin 1.85 right now but i'm stuck at BcmCP.img for over an hour . Is it because i forgot to remove the sd card ? I only removed the sim and is it safe to stop the process and start over again or should i wait ?
Click to expand...
Click to collapse
Well after trying this proces for the 5th time i finally managed to go to stock rom and it only lasted a couple of minutes Of course thanx to doky73 who made all this possible ! So i unbricked it for the second time i guess
Hello all!
I have been a long time lurker, since the release of the Galaxy S3. I thought I had an account here but when I tried logging in I was told my credentials were invalid. Here is the situation. I tried to root my girlfriends phone and forgot to enable USB Debugging. Now it's stuck on the message that says; "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have been scouring this forum for 2 days just about and I can't seem to find a situation like mine, a little like mine but not exactly like mine. I never really posted because any issue I've had, I have been able to fix by scouring the forums but this one is different.
I've downloaded Kies and tried to do an emergency recovery but it keeps saying the phone isn't recognized. I've tried every step but it keeps failing on me near the end. I've used Odin and it fails every time and I don't think I can boot into recovery mode. I can boot into the screen with the big droidbot where it say "DO NOT TURN OFF TARGET" but I can't boot into the actual recovery mode where I can use the volume keys to wipe cache or anything else.
Any help will be appreciated. Sorry I haven't engaged in the customary 4play before diving right in but we are on vacation in Puerto Rico and check out is in an hour. I want to get it up and running before that. I'm glued to my laptop so any thing you need to know that might help you to help me, please ask.
Squarez said:
Hello all!
I have been a long time lurker, since the release of the Galaxy S3. I thought I had an account here but when I tried logging in I was told my credentials were invalid. Here is the situation. I tried to root my girlfriends phone and forgot to enable USB Debugging. Now it's stuck on the message that says; "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have been scouring this forum for 2 days just about and I can't seem to find a situation like mine, a little like mine but not exactly like mine. I never really posted because any issue I've had, I have been able to fix by scouring the forums but this one is different.
I've downloaded Kies and tried to do an emergency recovery but it keeps saying the phone isn't recognized. I've tried every step but it keeps failing on me near the end. I've used Odin and it fails every time and I don't think I can boot into recovery mode. I can boot into the screen with the big droidbot where it say "DO NOT TURN OFF TARGET" but I can't boot into the actual recovery mode where I can use the volume keys to wipe cache or anything else.
Any help will be appreciated. Sorry I haven't engaged in the customary 4play before diving right in but we are on vacation in Puerto Rico and check out is in an hour. I want to get it up and running before that. I'm glued to my laptop so any thing you need to know that might help you to help me, please ask.
Click to expand...
Click to collapse
Can you give us a little more information on the model of the phone? And what firmware she was currently running with the problem occurred?
Squarez said:
Hello all!
I have been a long time lurker, since the release of the Galaxy S3. I thought I had an account here but when I tried logging in I was told my credentials were invalid. Here is the situation. I tried to root my girlfriends phone and forgot to enable USB Debugging. Now it's stuck on the message that says; "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I have been scouring this forum for 2 days just about and I can't seem to find a situation like mine, a little like mine but not exactly like mine. I never really posted because any issue I've had, I have been able to fix by scouring the forums but this one is different.
I've downloaded Kies and tried to do an emergency recovery but it keeps saying the phone isn't recognized. I've tried every step but it keeps failing on me near the end. I've used Odin and it fails every time and I don't think I can boot into recovery mode. I can boot into the screen with the big droidbot where it say "DO NOT TURN OFF TARGET" but I can't boot into the actual recovery mode where I can use the volume keys to wipe cache or anything else.
Any help will be appreciated. Sorry I haven't engaged in the customary 4play before diving right in but we are on vacation in Puerto Rico and check out is in an hour. I want to get it up and running before that. I'm glued to my laptop so any thing you need to know that might help you to help me, please ask.
Click to expand...
Click to collapse
Sounds like you borked your stock recovery. Dependening on which firmware you were on flash the stock recovery in PDA slot in Odin:
MK2:https://mega.co.nz/#!E0kmzJLJ!Ftv1rwI68IU847kxATj9MF45ykUPlmyCUOF6OXs0HdY
NB1:https://mega.co.nz/#!M9EQBT5A!ri4QeMYpgi-JjmUGZ3FY2gtogDBWPEL7zRCjASIcVe8
Download latest firmware and use Odin to flash said firmware. Should fix the problem
Sent from my HTC6600LVW using xda app-developers app
It's a Samsung Galaxy S4 SGH-I337 and she was running KitKat 4.4.2 when it went brick. I'll try the steps outlined and let you guys know how it goes.
So I tried flashing using Odin and here is what I got. I said PIT file was missing so I loaded a PIT file and what you see is what I saw.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NB1 = 4.4 firmware
Just flash the NB4 stock recovery.
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
Meant NB1
muniz_ri said:
NB1 = 4.4 firmware
Just flash the NB4 stock recovery.
---------- Post added at 01:01 PM ---------- Previous post was at 01:00 PM ----------
Meant NB1
Click to expand...
Click to collapse
I removed MD5 from the end of the file and it worked flawlessly. I was able to get into recovery mode and from everything I've learned here over the years I got it from here. Thank you guys so much, the knowledge that's here is amazing.
Squarez said:
I removed MD5 from the end of the file and it worked flawlessly. I was able to get into recovery mode and from everything I've learned here over the years I got it from here. Thank you guys so much, the knowledge that's here is amazing.
Click to expand...
Click to collapse
Glad you got it figured out buddy. :good:
She can stop slapping you in the back of the head now because you will have her back to playing her games and socializing in no time.
Yup, knowledge acquired from borking my phone every which way. I'm glad it worked out.
Maribou said:
Glad you got it figured out buddy. :good:
She can stop slapping you in the back of the head now because you will have her back to playing her games and socializing in no time.
Click to expand...
Click to collapse
Not so fast lol. I had to leave our rented house and now we are at her parents house before we leave in the morning. I shouldn't have rushed out but we were out of time. Now the screen stops at the AT&T logo and it turns orange. It won't start up to the actual OS. Any help with that? I can get to recovery mode and download mode but nothing more.
On a side note, while I was driving over here this situation made me want to learn more and the fact that you guys love helping so much makes me want to learn more about my phone and taking advantage of it. I'm going to find a profile picture to customize my profile because once I hit the states I think I'm going to participate a lot more. I just saw some custom themes that blew my mind!
Just noticed it gets extremely hot when it let it sit on the frozen orange logo screen.
Squarez said:
Just noticed it gets extremely hot when it let it sit on the frozen orange logo screen.
Click to expand...
Click to collapse
Here is the 4.4 full odin tar file: http://forum.xda-developers.com/showthread.php?t=2674223
muniz_ri said:
Here is the 4.4 full odin tar file: http://forum.xda-developers.com/showthread.php?t=2674223
Click to expand...
Click to collapse
Thank you! All I have are the MK2 files. I'll wait until I get to an actual wifi spot to download that because I've almost chewed up most of my cell bandwidth for the month. A 1.5GB hit won't help.
Also I just noticed the thank you button so I'm going to give thanks for everyone that has helped. It's appreciated!
Wait, I have the rooted NB1 image V2.0. Can I use that? Problem is, every time I try and use it, Odin crashes.
These are the last steps I was following before it bricked it accidentally. I have all these files.
http://forum.xda-developers.com/showthread.php?t=2663545
Squarez said:
These are the last steps I was following before it bricked it accidentally. I have all these files.
http://forum.xda-developers.com/showthread.php?t=2663545
Click to expand...
Click to collapse
I recommend you flash the 4.4 NB1 full odin tar to get your back up and running. From there you can take your time and do some reading and make sure you understand before flashing anything else. As long as newbies make an attempt to search and read most people here are glad to answer questions. Good luck
muniz_ri said:
I recommend you flash the 4.4 NB1 full odin tar to get your back up and running. From there you can take your time and do some reading and make sure you understand before flashing anything else. As long as newbies make an attempt to search and read most people here are glad to answer questions. Good luck
Click to expand...
Click to collapse
Yeah so I'll look for a good connection that wont kill my data plan. What funny is, I can root in my sleep, been doing it for a few years. With hers I just screwed up and now it's giving me problems. There is a plethora of data here that I mine through every few weeks. Up until this newest update my phone has been rooted since I got it with SU, Titanium Backup etc but I guess I have to keep up with what's new. You live and you learn I guess. Thanks for all your help, I really appreciate it.
Squarez said:
These are the last steps I was following before it bricked it accidentally. I have all these files.
http://forum.xda-developers.com/showthread.php?t=2663545
Click to expand...
Click to collapse
I think it's going to take a lot of cunning linguistics to fix this little mess with your girlfriend dear fellow!
adomol said:
I think it's going to take a lot of cunning linguistics to fix this little mess with your girlfriend dear fellow!
Click to expand...
Click to collapse
lol, i was thinking the same thing. Would not like to be him right now.
Hi, my 910G started to restart. Today, didn't boot anymore. Not even in Recovery. But now is on Download mode and says "mmc_read-fail". I've read that it could be a hard problem.. but maybe it could be a partition problem. IN that case, I need the pit file, but I can't find it. I tried to flash the stock rom using oding, but i get olways an error :S.
Please, help me!
If you can't even get to odin without mmc read, maybe it is your memory. Sorry I couldn't help, can't beat hardware failures. .Best of luck
I can give you two suggestions
1)Start from scratch.
Remove any samsung related prog from control panel of your computer
Then flash stock firmware with odin
2)Try to claim warranty and tell them you get custom when you are trying to fix it from Internet
usmann_090 said:
If you can't even get to odin without mmc read, maybe it is your memory. Sorry I couldn't help, can't beat hardware failures. .Best of luck
I can give you two suggestions
1)Start from scratch.
Remove any samsung related prog from control panel of your computer
Then flash stock firmware with odin
2)Try to claim warranty and tell them you get custom when you are trying to fix it from Internet
Click to expand...
Click to collapse
I've installed some roms. Now I'm on Nameless Rom. The problem is when I turn off the phone. If I take out the battery, put it, and press "on button", it says "could do not normal boot mmc_read failed". But if I do that processs, and enter to recovery, tap "reset normal mode", the phone works great... What could it be?
takato23 said:
I've installed some roms. Now I'm on Nameless Rom. The problem is when I turn off the phone. If I take out the battery, put it, and press "on button", it says "could do not normal boot mmc_read failed". But if I do that processs, and enter to recovery, tap "reset normal mode", the phone works great... What could it be?
Click to expand...
Click to collapse
You are not explaining your matter
Tell me
1)you are on nameless rom is your device working?
2)have you tried flashing PIT file ?
3)& give me your model complete details of you want PIT file?
usmann_090 said:
You are not explaining your matter
Tell me
1)you are on nameless rom is your device working?
2)have you tried flashing PIT file ?
3)& give me your model complete details of you want PIT file?
Click to expand...
Click to collapse
Well, this is the new "panorama":
The phone started again, when I installed the Singapure 5.1.1 N910G Version. Then, I've installed Nameless Rom 5.1.1 Stock. In the first reboot, it reboot again, and show "MCC READING ERROR" with "Download Mode". Turned it off and on, and it works again.
The thing is that the phone wasn't working 100%. Maybe in one reboot, it works flawless for 10 minuts. Then, get a call and the phone get stuck. Need to take battery out, to get it work.
So I've installed Australian Version 5.1.1. The same. Maybe its thing of me, but I think that when I try the phone with the Sim inside, its when it worse work. It's more common to have lag in an app.
I'm getting mad, really. I want to sell it, and I can't sell it like this... because I don't know if it will work or fail.
Tried this: http://forum.xda-developers.com/showthread.php?t=1823918. Used the 4 files. No problem in any block. Not even in Ifinite loop mode, when it searchs for an error till it gets one...
I don't know what to dooooooo
takato23 said:
Well, this is the new "panorama":
The phone started again, when I installed the Singapure 5.1.1 N910G Version. Then, I've installed Nameless Rom 5.1.1 Stock. In the first reboot, it reboot again, and show "MCC READING ERROR" with "Download Mode". Turned it off and on, and it works again.
The thing is that the phone wasn't working 100%. Maybe in one reboot, it works flawless for 10 minuts. Then, get a call and the phone get stuck. Need to take battery out, to get it work.
So I've installed Australian Version 5.1.1. The same. Maybe its thing of me, but I think that when I try the phone with the Sim inside, its when it worse work. It's more common to have lag in an app.
I'm getting mad, really. I want to sell it, and I can't sell it like this... because I don't know if it will work or fail.
Tried this: http://forum.xda-developers.com/showthread.php?t=1823918. Used the 4 files. No problem in any block. Not even in Ifinite loop mode, when it searchs for an error till it gets one...
I don't know what to dooooooo
Click to expand...
Click to collapse
#1. Flash one thing and stop messing with it! DO NOT install anything else but stock TW ROMs until you get it working.
#2 Flash the correct firmware (MODEL/BOOTLOADER VERSION)
#3 After ODIN flash, from stock recovery choose reset to factory default.
dicksteele said:
#1. Flash one thing and stop messing with it! DO NOT install anything else but stock TW ROMs until you get it working.
#2 Flash the correct firmware (MODEL/BOOTLOADER VERSION)
#3 After ODIN flash, from stock recovery choose reset to factory default.
Click to expand...
Click to collapse
Well, I did that. Installed N910GDTU1COJ3_N910GXSA1COJ3_N910GDTU1COJ3_HOME.tar (Australian SM910G Unbranded). And still the same.... what it could be? maybe something inside is breaking? like... sulfated chipset or ...something? its very annoyng not to have any visible error
takato23 said:
Well, I did that. Installed N910GDTU1COJ3_N910GXSA1COJ3_N910GDTU1COJ3_HOME.tar (Australian SM910G Unbranded). And still the same.... what it could be? maybe something inside is breaking? like... sulfated chipset or ...something? its very annoyng not to have any visible error
Click to expand...
Click to collapse
K. Post the contents of the ODIN window so I can look at it.
Either in a reply post or on http://pastebin.com/ and PM me the link
dicksteele said:
K. Post the contents of the ODIN window so I can look at it.
Either in a reply post or on http://pastebin.com/ and PM me the link
Click to expand...
Click to collapse
Here you have it. I done what you told me. Installed from scratch with odin, and then Factory Reset. Sometimes it takes long to boot (like, stays in "galaxy note 4 boot screen for 15 seconds). And when it turn on, it takes its time to show lockscreen.
http://pastebin.com/QTWmYde9
takato23 said:
Here you have it. I done what you told me. Installed from scratch with odin, and then Factory Reset. Sometimes it takes long to boot (like, stays in "galaxy note 4 boot screen for 15 seconds). And when it turn on, it takes its time to show lockscreen.
http://pastebin.com/QTWmYde9
Click to expand...
Click to collapse
Ok, so what is it doing now.
Because the ODIN flash looks like it went perfectly.
---------- Post added at 04:25 PM ---------- Previous post was at 04:15 PM ----------
dicksteele said:
Ok, so what is it doing now.
Because the ODIN flash looks like it went perfectly.
Click to expand...
Click to collapse
And now I finally noticed you have the N910G..... You need to be using the SnapDragon ROMs !
Like this one
http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568
Here's your area
http://forum.xda-developers.com/note-4/snapdragon-dev
https://swappa.com/specs/samsung-galaxy-note-4-n910g
Shows Snapdragon Processor
usmann_090 said:
You are not explaining your matter
Tell me
1)you are on nameless rom is your device working?
2)have you tried flashing PIT file ?
3)& give me your model complete details of you want PIT file?
Click to expand...
Click to collapse
Hi, could you give me the pit file for N910G, 32GB please. Thanks
dicksteele said:
Ok, so what is it doing now.
Because the ODIN flash looks like it went perfectly.
---------- Post added at 04:25 PM ---------- Previous post was at 04:15 PM ----------
And now I finally noticed you have the N910G..... You need to be using the SnapDragon ROMs !
Like this one
http://forum.xda-developers.com/note-4/snapdragon-dev/n910g-dr-ketan-custom-rom-t2928568
Here's your area
http://forum.xda-developers.com/note-4/snapdragon-dev
https://swappa.com/specs/samsung-galaxy-note-4-n910g
Shows Snapdragon Processor
Click to expand...
Click to collapse
Yeah, I know i have to use N910G Roms... that was just what I was doing,... the thing is that I don't know why it works so bad :S
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
this is what happened me today. Mmc error again... But I used the blocker checker like... 6 times and never got an error
takato23 said:
View attachment 3558044 this is what happened me today. Mmc error again... But I used the blocker checker like... 6 times and never got an error
Click to expand...
Click to collapse
Ok, I'm tracking now. Been helping 2-3 people and got mixed up.
I did find this.... So if anyone with a working N910G, they can do this.
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
Need to be rooted and busybox installed.
I've found it multiple places.
Here's with a S4. Same commands, same parition
http://forum.xda-developers.com/showthread.php?t=2582899
dicksteele said:
Ok, I'm tracking now. Been helping 2-3 people and got mixed up.
I did find this.... So if anyone with a working N910G, they can do this.
dd if=/dev/block/mmcblk0 of=/sdcard/out.pit bs=8 count=580 skip=2176
Need to be rooted and busybox installed.
I've found it multiple places.
Here's with a S4. Same commands, same parition
http://forum.xda-developers.com/showthread.php?t=2582899
Click to expand...
Click to collapse
That s for extracting pit file? I had a pit file from N910G... but it's from my N910G. Maye it's broken?
takato23 said:
That s for extracting pit file? I had a pit file from N910G... but it's from my N910G. Maye it's broken?
Click to expand...
Click to collapse
Correct.
I guess it's possible yours is broken. Not sure how. Except possibly flashing the wrong firmware from a different model or make phone.
That's one thing I have give Samsung a little credit on. They are trying to at least make the phone where they can't get f*cked up.
It does cost them money also to replace the phones that get wrecked by people flashing stuff randomly and turning them back in under warranty.
Not directing this at you. Hell I've turned a phone in I messed with.
I think it was messed up when I got it but I'll never know since I starting hacking into it as soon as I got it.
@takato23 @dicksteele
I've done the command on my N910G. I hope this helps. :good:
https://mega.nz/#!cJlH3T6C!uOb2jJXfLIfEzzqirAVmRYNKg0rTqo81RdM6i3pFfGU
So I have to flash the pit file alone, using re partition enabled in Odin? Or the pit file and the firmware?
takato23 said:
So I have to flash the pit file alone, using re partition enabled in Odin? Or the pit file and the firmware?
Click to expand...
Click to collapse
I'm reading both.... I honestly never had to do it.
Google Search flash pit file galaxy note 4
There are a few links to read but you probably already have,
---------- Post added at 09:51 AM ---------- Previous post was at 09:51 AM ----------
yesteryearisoverhere said:
@takato23 @dicksteele
I've done the command on my N910G. I hope this helps. :good:
https://mega.nz/#!cJlH3T6C!uOb2jJXfLIfEzzqirAVmRYNKg0rTqo81RdM6i3pFfGU
Click to expand...
Click to collapse
Sweet! Many thanks !
dicksteele said:
I'm reading both.... I honestly never had to do it.
Google Search flash pit file galaxy note 4
There are a few links to read but you probably already have,
---------- Post added at 09:51 AM ---------- Previous post was at 09:51 AM ----------
Sweet! Many thanks !
Click to expand...
Click to collapse
Yeah, I have read a lot... I think that just flashig .pit file has to be enough... but... I'm pretty scared also haha
hello friends
i got an error on the phone in download mode "secure check fail apnhlos" it happened after i tried to flash the the phone using odin
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the phone now dead, not showing anything no download mode no recovery, is there a solution ?
Chouiyekh said:
hello friends
i got an error on the phone in download mode "secure check fail apnhlos" it happened after i tried to flash the the phone using odin
the phone now dead, not showing anything no download mode no recovery, is there a solution ?
Click to expand...
Click to collapse
Try flashing unbrick img to sd card search on q&a forums.
victorAndrie said:
Try flashing unbrick img to sd card search on q&a forums.
Click to expand...
Click to collapse
but how to do it through sd card and the phone can't boot ! it's dead
Chouiyekh said:
but how to do it through sd card and the phone can't boot ! it's dead
Click to expand...
Click to collapse
Does the phone boot in download with sd card in? If not you need to get it to the service or try to fix it yourself with Z3X Box.
---------- Post added at 09:46 PM ---------- Previous post was at 09:45 PM ----------
And whats the model number of the phone?
victorAndrie said:
Does the phone boot in download with sd card in? If not you need to get it to the service or try to fix it yourself with Z3X Box.
---------- Post added at 09:46 PM ---------- Previous post was at 09:45 PM ----------
And whats the model number of the phone?
Click to expand...
Click to collapse
i'll try to boot in download mode with sd card then i'll answer you
the model number is : SM-J500F/DS
Chouiyekh said:
i'll try to boot in download mode with sd card then i'll answer you
the model number is : SM-J500F/DS
Click to expand...
Click to collapse
Ok,i will wait.
victorAndrie said:
Ok,i will wait.
Click to expand...
Click to collapse
the phone can't boot with or without sd card, but if i connect it with pc i heard some connecting sound ( and the phone screen still off )
notice ** the sd card is empty ** should i put something on it and how
Chouiyekh said:
the phone can't boot with or without sd card, but if i connect it with pc i heard some connecting sound ( and the phone screen still off )
Click to expand...
Click to collapse
Does tye pc see the phone in odin? If you hear a sound its not completely dead its the NAND/eMMc/UFS whatever you want to call it that its broken. If you have solder exlerience you can get it off the board and reprogram in in a Z3X box or something and then solder it back in. If not you can change the logic board entirely or go to a service.
But what was the reason to flash anyway?
victorAndrie said:
Does tye pc see the phone in odin? If you hear a sound its not completely dead its the NAND/eMMc/UFS whatever you want to call it that its broken. If you have solder exlerience you can get it off the board and reprogram in in a Z3X box or something and then solder it back in. If not you can change the logic board entirely or go to a service.
But what was the reason to flash anyway?
Click to expand...
Click to collapse
no, odin can not detect the phone, but i still heard connecting sound on windows 10, i think the best deal i can get is to change the entire logic board.
the reason to flash, is the phone was stuch in samsung logo with the msg above of the screen "Set Warranty Bit : Kernel", then i tried to do factory reset from recovery mode ** i noticed lot of red words while factory reset like this E:/ bla bla bla ...**, then i still have the problem after factory reset ( stuck on samsung logo ), after that i downloaded the flash for my phone model exactly J500F, and now this is the problem here we are
Chouiyekh said:
no, odin can not detect the phone, but i still heard connecting sound on windows 10, i think the best deal i can get is to change the entire logic board.
the reason to flash, is the phone was stuch in samsung logo with the msg above of the screen "Set Warranty Bit : Kernel", then i tried to do factory reset from recovery mode ** i noticed lot of red words while factory reset like this E:/ bla bla bla ...**, then i still have the problem after factory reset ( stuck on samsung logo ), after that i downloaded the flash for my phone model exactly J500F, and now this is the problem here we are
Click to expand...
Click to collapse
What csc did u have before and what csc rom you installee now?
---------- Post added at 03:56 PM ---------- Previous post was at 03:55 PM ----------
Chouiyekh said:
no, odin can not detect the phone, but i still heard connecting sound on windows 10, i think the best deal i can get is to change the entire logic board.
the reason to flash, is the phone was stuch in samsung logo with the msg above of the screen "Set Warranty Bit : Kernel", then i tried to do factory reset from recovery mode ** i noticed lot of red words while factory reset like this E:/ bla bla bla ...**, then i still have the problem after factory reset ( stuck on samsung logo ), after that i downloaded the flash for my phone model exactly J500F, and now this is the problem here we are
Click to expand...
Click to collapse
You couldve posted a thread before reflashing i know that problem it happened to a friend. Not its completely hard bricked.
victorAndrie said:
What csc did u have before and what csc rom you installee now?
i don't know what csc i had before flash, and after i flashed one file in AP
---------- Post added at 03:56 PM ---------- Previous post was at 03:55 PM ----------
You couldve posted a thread before reflashing i know that problem it happened to a friend. Not its completely hard bricked.
Click to expand...
Click to collapse
i thought i'll do it like a charm, i didn't expect that
Chouiyekh said:
i thought i'll do it like a charm, i didn't expect that
Click to expand...
Click to collapse
Unfortunately there isnt any unbrick.img for this device so ur dead.You can ask someone with a J500F like your to make you a debrick image (see on yt),
Edi,I found a debrick.img
https://mega.nz/#!VHhVBB7A!sNYh4FSaL6viErBzbXCKKm_GMRHiZJfU4IpF7ajrVQk
You extract the .gz file and there will be a unbrick file with no extension,just rename the file.
And flash it to a sd card using sd card reader and Win32DiskImager.
victorAndrie said:
Unfortunately there isnt any unbrick.img for this device so ur dead.You can ask someone with a J500F like your to make you a debrick image (see on yt),
Edi,I found a debrick.img
https://mega.nz/#!VHhVBB7A!sNYh4FSaL6viErBzbXCKKm_GMRHiZJfU4IpF7ajrVQk
You extract the .gz file and there will be a unbrick file with no extension,just rename the file.
And flash it to a sd card using sd card reader and Win32DiskImager.
Click to expand...
Click to collapse
i did what you wrote, but nothing happening when i put the sd card on the phone and try to normal boot, download mode or recovery
Chouiyekh said:
i did what you wrote, but nothing happening when i put the sd card on the phone and try to normal boot, download mode or recovery
Click to expand...
Click to collapse
Then it is 100% bricked. Do you want to open the phone and take me a picture of your nand? Or do you wish to repaor it at warranty
victorAndrie said:
Unfortunately there isnt any unbrick.img for this device so ur dead.You can ask someone with a J500F like your to make you a debrick image (see on yt),
Edi,I found a debrick.img
https://mega.nz/#!VHhVBB7A!sNYh4FSaL6viErBzbXCKKm_GMRHiZJfU4IpF7ajrVQk
You extract the .gz file and there will be a unbrick file with no extension,just rename the file.
And flash it to a sd card using sd card reader and Win32DiskImager.
Click to expand...
Click to collapse
Hey thats my debrick image from my mega link.
A bit of courtesy and ask before using would have been nice.
But anyway I don't think he did it right.
Extract the gz file and rename the file you extract (UNBRICK_IMAGE) to UNBRICK_IMAGE.img.
I don't think he did that part correctly.
Sounds like he just moved the file to the SD or renamed it wrong and didnt flash it correctly to SD
garylawwd said:
Hey thats my debrick image from my mega link.
A bit of courtesy and ask before using would have been nice.
But anyway I don't think he did it right.
Extract the gz file and rename the file you extract (UNBRICK_IMAGE) to UNBRICK_IMAGE.img.
I don't think he did that part correctly.
Sounds like he just moved the file to the SD or renamed it wrong and didnt flash it correctly to SD
Click to expand...
Click to collapse
Im sorry,I wanted to DM you but I forgot.
Anyway how did u know i took ur image?
victorAndrie said:
Im sorry,I wanted to DM you but I forgot.
Anyway how did u know i took ur image?
Click to expand...
Click to collapse
Because I follow the j5 threads for the last 2 years and im the only one to upload a j500f debrick image and its a bit of a coincidence that it was also uploaded to mega.
Anyway this is ot so lets just try get this guys device fixed
garylawwd said:
Because I follow the j5 threads for the last 2 years and im the only one to upload a j500f debrick image and its a bit of a coincidence that it was also uploaded to mega.
Anyway this is ot so lets just try get this guys device fixed
Click to expand...
Click to collapse
Yea,he is hard bricked so se will need to solder another Nand.
victorAndrie said:
Then it is 100% bricked. Do you want to open the phone and take me a picture of your nand? Or do you wish to repaor it at warranty
Click to expand...
Click to collapse
YES i can open it ... wait