Hello. I think i bricked my phone. But i can enter to bootloader and flash sbf. I try RSD 5.3.1, and 5.6 but with every sbf i try its always fail at 100%. After this i get Code corrupt message. Pls help.
SBF i tried:
JRDNEM_U3_3.4.2_179-4.4_VFSBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFES03A.0R_PDS03C_USAJRDNFRYOVFES_P028_A018_M002_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_164-003_BLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTFR_P014_A008_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_179-002_DEBLUR_CEE.sbf
Always fail at 100%. Pls. help me!!
Go to motorola recovery press vol up +vol down, format data/ wipe cache from stock recovery
Then flash sbf by normal means..
wishing all xda pals Happy Diwali
TI OMAP Blank flash could help, if the above didn't work
Sent from my MB526 using xda premium
Related
hello...im a newbie here...i installed a custom recovery (tenfar). After that i tried the recovery mode...the phone wouldnt reboot anymore...would just get stuck at the motorola sign...i tried wipe data...it wipes it but theres a message that reads E:Can't mount CACHE:recovery/command
E:Can't mount CACHE:recovery/caller
E:Can't mount CACHE:recovery/log
but after wipe data/factory reset the tenfar recovery also doesn't show anymore...just the stock recovery...plss help me.
reflash the sbf with rsd lite. that should solve it.
Sent from my MB525 using xda premium
i tries flashing too...the stock froyo...it just says failed to flash...=(...ive been trying that ...but nothing has worked out yet...
download rsdlite 5.3, rename the sbf file something like froyo.sbf (it must be short and simple), place it in your C:\. run rsdlite as an administrator, and select the sbf file. boot your phone in bootloader mode (vol. up+ power when switched off), connect to pc, and click start.
Sent from my MB525 using xda premium
zakoo2 said:
download rsdlite 5.3, rename the sbf file something like froyo.sbf (it must be short and simple), place it in your C:\. run rsdlite as an administrator, and select the sbf file. boot your phone in bootloader mode (vol. up+ power when switched off), connect to pc, and click start.
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
i now downloaded rsdlite 5.3(had 4.9) ...."Failed flashing process.Failed flashing process.Error processing flash file. (0x700F);phone connected" is the status in rsd...=(...it still gets stuck over there...the stock recovery opens up just fine though...
do you have the latest drivers installed?
yes all the latest drivers have been installed...fully updated...
my imei and msn in rsd lite shows N/A .is this normal?
Bro just wipe factory reset and wipe cache partition
Voilaaa its done and u can move further
Sent from my MB525 using xda premium
i had an issue updating from one CNA nightly to a newer one the other day, and was left with no option but to flash the original .sbf for my version of the phone & carrier etc. That worked fine, and i have a bootable stock phone, but when trying to install any rom, either through CWM recovery or fastboot, i get issues.
if i try through CWM the correct method, i get stuck on the Moto Dual Core screen forever, until i battery pull and have to sbf flash through RSD Lite again.
If i try through Fastboot, i get error Failed to process command flash: xxxxxxxxxx error (0x0003)
can anyone help please? i've been using various CM7/9 ROMS for months now, and cant deal with being stuck back on MotoBlur stock junk
many thanks in advance!
ishamm said:
i had an issue updating from one CNA nightly to a newer one the other day, and was left with no option but to flash the original .sbf for my version of the phone & carrier etc. That worked fine, and i have a bootable stock phone, but when trying to install any rom, either through CWM recovery or fastboot, i get issues.
if i try through CWM the correct method, i get stuck on the Moto Dual Core screen forever, until i battery pull and have to sbf flash through RSD Lite again.
If i try through Fastboot, i get error Failed to process command flash: xxxxxxxxxx error (0x0003)
can anyone help please? i've been using various CM7/9 ROMS for months now, and cant deal with being stuck back on MotoBlur stock junk
many thanks in advance!
Click to expand...
Click to collapse
Reflash the gingerbread pudding .sbf, you're bootloader isn't unlocked anymore.
Sent from my MB860 using xda premium
the sbf i flashed was from the pudding page, and i unlocked the bootloader again fine, have the unlock sign on the Moto boot logo, just cant get any further than that with ROMs anymore..
EDIT: i am also getting the issue when flashing any kernels,
I can flash a recovery through fastboot, which it says is successful, but when i try to boot into recovery i get failed to boot 2, entering RSD mode.
I used this link to root my defy plus 2.3.6
http://forum.xda-developers.com/showthread.php?t=1542956
after flashing the 1st sbf with rsd lite i wiped the data/cache and the flashed the 2nd sbf (step 4) with rsd lite. The process was completed but my fone didnt start up.. on turning it on it automatically went into the bootloader and gave some error "err: e9,a9..." (sorry i dont rem it exactly!)
The error is :
Err:A5,69,35,00,27
downloaded the sbf again and tried again..same error
i tried it twice ..wiped data and followed all the steps still same prob..
finally i flashed the 1st sbf (step 2) and got the fone on...
but the fone is still not Rooted!!
how do i root it??
pls help!!
thanks in advance :good:
Hi all, about 3 days i just search and search how to boot up my phone.
Used RSD 4.9, 5.3.1, 5.7
I downloaded jordan sbf firstly and successfully loaded up my phone, then i rooted it and installed 0.6.1 bootmenu by shell command (by apk somewhy i couldn't) any try of upgrade by flashing CWM to cm10 or cm7 again faild in just logo stuck.
Then i tried other sbf and always got failed msg over RSD. angry i flashed with RSD mb526 SBF on my (MB525) successfully but then M logo stucked up and never got it booting. from then when i tried jordan sbf i failed, tried any mb525 failed only mb526 which only stuck and M logo successed.
I have to say getting into CWM never work, only bootloader white screen.
I need help to figure out what to do and how to get it work again... i read about BL7 and such i don't understand it i just want to get it on...
I need help...
Thanks!
Very good friends. I have a motorola defy MB525 bricked. not start. when I connect to PC, LED lights in white and does not recognize me from zero to flash firmware with RSD Lite (I hope you can give me some solution.
note: buy another battery thinking it was the battery but does not work. nor I can enter bootloader mode.
charge the battery in another defy or external charger, then try again RSD
help
snmatias said:
charge the battery in another defy or external charger, then try again RSD
Click to expand...
Click to collapse
use a motorola defy+ firmware and now I can not go down to froyo 2.2 any idea to go back?
If you used too high version of original SBF, it may be impossible to downgrade. Compare your SBF version with list from this post: http://forum.xda-developers.com/showpost.php?p=11588065&postcount=1 .
thrackanomir said:
If you used too high version of original SBF, it may be impossible to downgrade. Compare your SBF version with list from this post: http://forum.xda-developers.com/showpost.php?p=11588065&postcount=1 .
Click to expand...
Click to collapse
my device is a motorola defy and put a firmware defy motorlola not exactly what I had my defy time as it makes you install cyanogenmod 7. I've tried many original SBF and are stock and some just turns the screen on the logo then automatically enters bootloader mode but not always start stays in bootloader mode.
this was the last to use:
DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf
which I use to work then again my motorola defy?
this puts me in the bootloader:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
Does flashing dfp 231 give bl error or blank screen?
If so then your defy is unfixable
Sent from my MB526 using Tapatalk
thekguy said:
Don't use stock now, is dfp 231 sending you to bl error?
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
explain better, I understand nothing.
thekguy said:
Does flashing dfp 231 give bl error or blank screen?
If so then your defy is unfixable
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
my motorola defy only lights on the M logo and freezes there then putting me back to bootloader the following:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
lildark7 said:
my motorola defy only lights on the M logo and freezes there then putting me back to bootloader the following:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1595013
atulclassic said:
try this
http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
as I do the wipe?
I had exact same error as you today, and had to reflash DFP-231 more than one time, but in the end it worked.
i followed instructions from here:
http://forum.xda-developers.com/showthread.php?t=1542956
so, using RSD Lite version 6.1.5 i flashed DEFYPLUS_U3_4.5.1-134_DFP-231 (when it tries to reboot i get the same error as you, but i continue process and go ahead and flash the second ROOTED sbf)
http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
then i flashed same version firmware as above but ROOTED from this link ..
http://www.mediafire.com/?76z12j1at3etf4j
if stuck in bootloop Motorola-logo after flashing ROOTED SBF, just follow "stuck in bootloop advice" in first post here:
http://forum.xda-developers.com/showthread.php?t=1618718
so basically i did ..
1. flash SBF with RSD Lite
2. got strange error message: "Bootloader 09.10 Err:A5,69,35,00,27 Batery OK OK to Program Connect USB"
3. flash ROOTED SBF with RSD Lite
4. stuck in motorola-logo bootloop
5. take out battery
6. hold power button and VOL+ pressed when putting battery back to enter "stock android boot menu"
7. restore factorysettings + wipe cache
8. boot notmal into "horrible motoblur"..
9. install SndInitDefy_2.3.apk
10. install defy_twrp_recovery.2.3.6.0.zip
11. install update-recovery.zip (from quarx kit kat thread)
12. i installed cm-11-20140326-NIGHTLY-mb526.zip ( http://forum.xda-developers.com/showthread.php?t=2515036 )
13. SUCCESFUL REBOOT !
Seems direct to CM11 is ok nowdays http://forum.xda-developers.com/showpost.php?p=51101948&postcount=731
Useful threas if u get stuck with other things during the process:
http://forum.xda-developers.com/showthread.php?t=1828639
http://forum.xda-developers.com/showthread.php?t=2568325
slstr said:
I had exact same error as you today, and had to reflash DFP-231 more than one time, but in the end it worked.
i followed instructions from here:
http://forum.xda-developers.com/showthread.php?t=1542956
so, using RSD Lite version 6.1.5 i flashed DEFYPLUS_U3_4.5.1-134_DFP-231 (when it tries to reboot i get the same error as you, but i continue process and go ahead and flash the second ROOTED sbf)
http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
then i flashed same version firmware as above but ROOTED from this link ..
http://www.mediafire.com/?76z12j1at3etf4j
if stuck in bootloop Motorola-logo after flashing ROOTED SBF, just follow "stuck in bootloop advice" in first post here:
http://forum.xda-developers.com/showthread.php?t=1618718
so basically i did ..
1. flash SBF with RSD Lite
2. got strange error message: "Bootloader 09.10 Err:A5,69,35,00,27 Batery OK OK to Program Connect USB"
3. flash ROOTED SBF with RSD Lite
4. stuck in motorola-logo bootloop
5. take out battery
6. hold power button and VOL+ pressed when putting battery back to enter "stock android boot menu"
7. restore factorysettings + wipe cache
8. boot notmal into "horrible motoblur"..
9. install SndInitDefy_2.3.apk
10. install defy_twrp_recovery.2.3.6.0.zip
11. install update-recovery.zip (from quarx kit kat thread)
12. i installed cm-11-20140326-NIGHTLY-mb526.zip ( http://forum.xda-developers.com/showthread.php?t=2515036 )
13. SUCCESFUL REBOOT !
Seems direct to CM11 is ok nowdays http://forum.xda-developers.com/showpost.php?p=51101948&postcount=731
Useful threas if u get stuck with other things during the process:
http://forum.xda-developers.com/showthread.php?t=1828639
http://forum.xda-developers.com/showthread.php?t=2568325
Click to expand...
Click to collapse
thanks for the help served me.
by wilderness as installed CM11? I did the wipes, then install the rom and Gapps but then says setup.service first start is stoped. how can I fix that?
lildark7 said:
thanks for the help served me.
by wilderness as installed CM11? I did the wipes, then install the rom and Gapps but then says setup.service first start is stoped. how can I fix that?
Click to expand...
Click to collapse
First boot without gapps and configure phone, then re-boot into twrp and install gapps. Many people use minimal gapps (by banks ?..) because of defy low memory specs..
you find link to BANKS' minimal gapps in Quarx's CM11 kitakat thread, first post i think. or just use search.
best of luck!