Desperate| Need help unbrick defy mb525 - Defy Q&A, Help & Troubleshooting

Hi all, about 3 days i just search and search how to boot up my phone.
Used RSD 4.9, 5.3.1, 5.7
I downloaded jordan sbf firstly and successfully loaded up my phone, then i rooted it and installed 0.6.1 bootmenu by shell command (by apk somewhy i couldn't) any try of upgrade by flashing CWM to cm10 or cm7 again faild in just logo stuck.
Then i tried other sbf and always got failed msg over RSD. angry i flashed with RSD mb526 SBF on my (MB525) successfully but then M logo stucked up and never got it booting. from then when i tried jordan sbf i failed, tried any mb525 failed only mb526 which only stuck and M logo successed.
I have to say getting into CWM never work, only bootloader white screen.
I need help to figure out what to do and how to get it work again... i read about BL7 and such i don't understand it i just want to get it on...
I need help...
Thanks!

Related

Fasboot Flash fail (0x0003)

i had an issue updating from one CNA nightly to a newer one the other day, and was left with no option but to flash the original .sbf for my version of the phone & carrier etc. That worked fine, and i have a bootable stock phone, but when trying to install any rom, either through CWM recovery or fastboot, i get issues.
if i try through CWM the correct method, i get stuck on the Moto Dual Core screen forever, until i battery pull and have to sbf flash through RSD Lite again.
If i try through Fastboot, i get error Failed to process command flash: xxxxxxxxxx error (0x0003)
can anyone help please? i've been using various CM7/9 ROMS for months now, and cant deal with being stuck back on MotoBlur stock junk
many thanks in advance!
ishamm said:
i had an issue updating from one CNA nightly to a newer one the other day, and was left with no option but to flash the original .sbf for my version of the phone & carrier etc. That worked fine, and i have a bootable stock phone, but when trying to install any rom, either through CWM recovery or fastboot, i get issues.
if i try through CWM the correct method, i get stuck on the Moto Dual Core screen forever, until i battery pull and have to sbf flash through RSD Lite again.
If i try through Fastboot, i get error Failed to process command flash: xxxxxxxxxx error (0x0003)
can anyone help please? i've been using various CM7/9 ROMS for months now, and cant deal with being stuck back on MotoBlur stock junk
many thanks in advance!
Click to expand...
Click to collapse
Reflash the gingerbread pudding .sbf, you're bootloader isn't unlocked anymore.
Sent from my MB860 using xda premium
the sbf i flashed was from the pudding page, and i unlocked the bootloader again fine, have the unlock sign on the Moto boot logo, just cant get any further than that with ROMs anymore..
EDIT: i am also getting the issue when flashing any kernels,
I can flash a recovery through fastboot, which it says is successful, but when i try to boot into recovery i get failed to boot 2, entering RSD mode.

Error After Rooting 2.3.6

I used this link to root my defy plus 2.3.6
http://forum.xda-developers.com/showthread.php?t=1542956
after flashing the 1st sbf with rsd lite i wiped the data/cache and the flashed the 2nd sbf (step 4) with rsd lite. The process was completed but my fone didnt start up.. on turning it on it automatically went into the bootloader and gave some error "err: e9,a9..." (sorry i dont rem it exactly!)
The error is :
Err:A5,69,35,00,27
downloaded the sbf again and tried again..same error
i tried it twice ..wiped data and followed all the steps still same prob..
finally i flashed the 1st sbf (step 2) and got the fone on...
but the fone is still not Rooted!!
how do i root it??
pls help!!
thanks in advance :good:

Defy Mini failed flashing process

Gi guys.
I have a problem. I want to install a Custom ROM on my Motorola Dey Mini (XT320) - TNBST_4_0A.1F.10RPS_flex_WE_Orange_Poland - using RSD Lite. I'm following the tutorial - running RSD Lite, opening the ROM file, turning my phone on into the recovery mode, connecting it to computer, clicking "Start" in RSD Lite. Then, unfortunately, the ROM isn't flashed The process is failed, there is an information about this:
"Failed flashing process. Failed flashing process. Unable to retrieve interface handle. (0x7027); phone connected"
What do I have to do to successfully flash my Motorola Defy Mini?
Please, help me!
Its not a custom rom and you must not boot into recovery. You must have your phone turned on normally and then click start. It will reboot to flash mode automatically.
Sh0m1 said:
Its not a custom rom and you must not boot into recovery. You must have your phone turned on normally and then click start. It will reboot to flash mode automatically.
Click to expand...
Click to collapse
I'm doing like you wrote and still the same...

[Q] Bricked Defy XT 557 PLease Help!

I loaded a custom (and broken) recovery on my defy xt 557 (republic wireless) and now it boots to the flash mode with error code 0301. i have a nandroid backup but cant figure out how to restore the recovery. rsd lite doesnt support img files.. and fastboot doesnt work with this device.. please help me! Can i put the xt 535 ics on it and then restore my nandroid? i have searched for a good 6 hours and cant find anything.
Thank you

please help bricked defy led white

Very good friends. I have a motorola defy MB525 bricked. not start. when I connect to PC, LED lights in white and does not recognize me from zero to flash firmware with RSD Lite (I hope you can give me some solution.
note: buy another battery thinking it was the battery but does not work. nor I can enter bootloader mode.
charge the battery in another defy or external charger, then try again RSD
help
snmatias said:
charge the battery in another defy or external charger, then try again RSD
Click to expand...
Click to collapse
use a motorola defy+ firmware and now I can not go down to froyo 2.2 any idea to go back?
If you used too high version of original SBF, it may be impossible to downgrade. Compare your SBF version with list from this post: http://forum.xda-developers.com/showpost.php?p=11588065&postcount=1 .
thrackanomir said:
If you used too high version of original SBF, it may be impossible to downgrade. Compare your SBF version with list from this post: http://forum.xda-developers.com/showpost.php?p=11588065&postcount=1 .
Click to expand...
Click to collapse
my device is a motorola defy and put a firmware defy motorlola not exactly what I had my defy time as it makes you install cyanogenmod 7. I've tried many original SBF and are stock and some just turns the screen on the logo then automatically enters bootloader mode but not always start stays in bootloader mode.
this was the last to use:
DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.sbf
which I use to work then again my motorola defy?
this puts me in the bootloader:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
Does flashing dfp 231 give bl error or blank screen?
If so then your defy is unfixable
Sent from my MB526 using Tapatalk
thekguy said:
Don't use stock now, is dfp 231 sending you to bl error?
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
explain better, I understand nothing.
thekguy said:
Does flashing dfp 231 give bl error or blank screen?
If so then your defy is unfixable
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
my motorola defy only lights on the M logo and freezes there then putting me back to bootloader the following:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
lildark7 said:
my motorola defy only lights on the M logo and freezes there then putting me back to bootloader the following:
Bootloader
09.10
Err:A5,69,35,00,27
Batery OK
OK to Program
Connect USB
Data Cable
thanks in advance for the help.
Click to expand...
Click to collapse
try this
http://forum.xda-developers.com/showthread.php?t=1595013
atulclassic said:
try this
http://forum.xda-developers.com/showthread.php?t=1595013
Click to expand...
Click to collapse
as I do the wipe?
I had exact same error as you today, and had to reflash DFP-231 more than one time, but in the end it worked.
i followed instructions from here:
http://forum.xda-developers.com/showthread.php?t=1542956
so, using RSD Lite version 6.1.5 i flashed DEFYPLUS_U3_4.5.1-134_DFP-231 (when it tries to reboot i get the same error as you, but i continue process and go ahead and flash the second ROOTED sbf)
http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
then i flashed same version firmware as above but ROOTED from this link ..
http://www.mediafire.com/?76z12j1at3etf4j
if stuck in bootloop Motorola-logo after flashing ROOTED SBF, just follow "stuck in bootloop advice" in first post here:
http://forum.xda-developers.com/showthread.php?t=1618718
so basically i did ..
1. flash SBF with RSD Lite
2. got strange error message: "Bootloader 09.10 Err:A5,69,35,00,27 Batery OK OK to Program Connect USB"
3. flash ROOTED SBF with RSD Lite
4. stuck in motorola-logo bootloop
5. take out battery
6. hold power button and VOL+ pressed when putting battery back to enter "stock android boot menu"
7. restore factorysettings + wipe cache
8. boot notmal into "horrible motoblur"..
9. install SndInitDefy_2.3.apk
10. install defy_twrp_recovery.2.3.6.0.zip
11. install update-recovery.zip (from quarx kit kat thread)
12. i installed cm-11-20140326-NIGHTLY-mb526.zip ( http://forum.xda-developers.com/showthread.php?t=2515036 )
13. SUCCESFUL REBOOT !
Seems direct to CM11 is ok nowdays http://forum.xda-developers.com/showpost.php?p=51101948&postcount=731
Useful threas if u get stuck with other things during the process:
http://forum.xda-developers.com/showthread.php?t=1828639
http://forum.xda-developers.com/showthread.php?t=2568325
slstr said:
I had exact same error as you today, and had to reflash DFP-231 more than one time, but in the end it worked.
i followed instructions from here:
http://forum.xda-developers.com/showthread.php?t=1542956
so, using RSD Lite version 6.1.5 i flashed DEFYPLUS_U3_4.5.1-134_DFP-231 (when it tries to reboot i get the same error as you, but i continue process and go ahead and flash the second ROOTED sbf)
http://sbf.droid-developers.org/umt..._USAJRDNGIBRRTCEE_P022_A022_Service1FF.sbf.gz
then i flashed same version firmware as above but ROOTED from this link ..
http://www.mediafire.com/?76z12j1at3etf4j
if stuck in bootloop Motorola-logo after flashing ROOTED SBF, just follow "stuck in bootloop advice" in first post here:
http://forum.xda-developers.com/showthread.php?t=1618718
so basically i did ..
1. flash SBF with RSD Lite
2. got strange error message: "Bootloader 09.10 Err:A5,69,35,00,27 Batery OK OK to Program Connect USB"
3. flash ROOTED SBF with RSD Lite
4. stuck in motorola-logo bootloop
5. take out battery
6. hold power button and VOL+ pressed when putting battery back to enter "stock android boot menu"
7. restore factorysettings + wipe cache
8. boot notmal into "horrible motoblur"..
9. install SndInitDefy_2.3.apk
10. install defy_twrp_recovery.2.3.6.0.zip
11. install update-recovery.zip (from quarx kit kat thread)
12. i installed cm-11-20140326-NIGHTLY-mb526.zip ( http://forum.xda-developers.com/showthread.php?t=2515036 )
13. SUCCESFUL REBOOT !
Seems direct to CM11 is ok nowdays http://forum.xda-developers.com/showpost.php?p=51101948&postcount=731
Useful threas if u get stuck with other things during the process:
http://forum.xda-developers.com/showthread.php?t=1828639
http://forum.xda-developers.com/showthread.php?t=2568325
Click to expand...
Click to collapse
thanks for the help served me.
by wilderness as installed CM11? I did the wipes, then install the rom and Gapps but then says setup.service first start is stoped. how can I fix that?
lildark7 said:
thanks for the help served me.
by wilderness as installed CM11? I did the wipes, then install the rom and Gapps but then says setup.service first start is stoped. how can I fix that?
Click to expand...
Click to collapse
First boot without gapps and configure phone, then re-boot into twrp and install gapps. Many people use minimal gapps (by banks ?..) because of defy low memory specs..
you find link to BANKS' minimal gapps in Quarx's CM11 kitakat thread, first post i think. or just use search.
best of luck!

Categories

Resources