Database Users

SD Card Problem

Ok well I removed my sd card from my G1, and when I put it back in it gives me a "Blank SD Card" notification. I tried resetting my G1, and it didnt work. So I mounted it on my laptop and now it says "Drive G is not formatted would you like to format now?." I am really not trying to lose all my data and apps, and I kno my stuff didnt get deleted, how can this b fixed?

One of two ways, in my eyes.
First try looking at paragon, it might be able to find the partitions again and hopefully repair them.
Two try a data recovery program, personally I like GetDataBack but it only works for FAT and NTFS and not EXT2 if your data and apps were on that partition.

Hmm I tried GDB and it took about an hour and what do u kno I need the licensed version to get my files off, and will Paragon work? Cuz I dont wanna waste another hour.

SD Card fix ok
just put the sd card inside the adapter that all sd card brings when you get it.ok
AND than insert it on your labtop and copy all your files to your computer and format your sd card..

jcarloss said:
just put the sd card inside the adapter that all sd card brings when you get it.ok
AND than insert it on your labtop and copy all your files to your computer and format your sd card..
Click to expand...
Click to collapse
As I said in the original post when I mounted it is said it needed to format, but anyway I found a program and got my files off, but I need to recover my ext2 partition which I dont think will happen

http://www.diskinternals.com/Linux-Recovery/
Never tried it but it might be worth a shot.

jashsu said:
http://www.diskinternals.com/Linux-Recovery/
Never tried it but it might be worth a shot.
Click to expand...
Click to collapse
Yea I tried it but I need the paid version to recover

Have you tried inserting the sdcard into a computer running ubuntu? It will probably recognize the ext partition without any trouble.

Will I b able 2 use ubuntu to restore it?

AsaSpades said:
Will I b able 2 use ubuntu to restore it?
Click to expand...
Click to collapse
I dunno, that's why I asked if you had tried it yet or not. You can always burn a Ubuntu livecd and test it without installing anything. As long as the partition table is intact it should be accessible.

jashsu said:
I dunno, that's why I asked if you had tried it yet or not. You can always burn a Ubuntu livecd and test it without installing anything. As long as the partition table is intact it should be accessible.
Click to expand...
Click to collapse
Its gonna b a long ass download, and the table is intact, but I just need to get the files off it, and id rather kno if ubuntu can do [email protected] b4 I download it, I wish I can jus find a free program for ext2 partitions

Blank SD Card
AsaSpades said:
As I said in the original post when I mounted it is said it needed to format, but anyway I found a program and got my files off, but I need to recover my ext2 partition which I dont think will happen
Click to expand...
Click to collapse
I loaded up Cyanogen's latest last week, formatted my 16gb to EXT2 and Fat32... all was working great for a week, then today, my G1 went blank. Upon a restart, the SD card came up with "Blank SD Card." Viewing the card from my card reader... can't read any files... what's the program that you "found?" I'll probably just fight through reformatting and rebuilding all my files... Later I'll perform file backup when I get it right.

this sound like your problem??
Hey asaspades, something like this happened to me a while back and I could read it on my laptop/cardreader and recover my files and reformat. Obv u have tried this. The thing is the same thing has hsappened not 10 min ago lol. When this happened before I was running my g1 as stock but now I have cyanmod (3.6.8.1 I think) amd apps 2 sd on ext2 partition. I am not at a computer atm but will try to recover the same way as before though I won't be able to access the ext2 partition (will try with ubuntu, hav wubi installer on pc). Oh and I rebooted after I realised something was wrong and now have a constant preparing sd card checking for errors notification. This sound kinda similar to your problem at all? I would like to know what is causing this. Maybe I just have a bad/corrupted sdcard lol. Anyway its really pissin me off not knowing
Left 4 a while and it now says damaged sdcard you may need to reformat.

Clockwork Recovery 3.0 Corrupted My 16gb Sd Card

I had just finished installing Myns New Rom and Flashed the combo radios aswell, I ran Titanium Backup and installed my apps. I opened Rom Manager and said I had to flash Clockwork Mod and it updated to 3.O. I then proceeded to make a back up of the rom and then my phone went straight to boot loader, It would not reboot and would not enter recovery just reboots back into boot loader. I finally removed the sd card and rebooted after 10 mins it went back to my rom. I then tried to open my sd card on pc an nothing shows up, I tried 2 others and nothing, cannot even format. I borrowed my friends evo and went to recovery with sdcard in to format it say error can not mount and nothing. I tried within the phone, with cm6 installed and it said the sd card was blank or wrong something, (I forgot) No luck. I think it might have destroyed my sd card, Im trying to find a software that may allow me to do so any luck.
-not visible in pc
-cannot mount or format on phone or recovery mode.
-16gb Micro Sd card Sandisk class 2, bought when touch pro came out for 110 from bestbuy (got 100 back from Htc Touch return so really only 10)
-Had partitoned earlier to run mikifroyo app2sd, unpartioned by formatting.
Please any help would be greatly appreciated, thank you.

Ok when I Insert My SD card it just boots to loading and reboots over and over again. Any ideas?

deolarte said:
Ok when I Insert My SD card it just boots to loading and reboots over and over again. Any ideas?
Click to expand...
Click to collapse
try looking in the forums for the lastet recovery in .zip format.
Copy it to the root of the sd card. (if you think that you have an issue with the SD card, then take a fresh SD that is formatted to Fat32. Make sure it is not NTFS. If you formatted on the Mac, make sure the partition format is MBR and not GUID, if you don't know how to do this, I can explain further. The easiest way would be to make sure that you do it on a windows machine)
Start your phone, and hopefully it will install the recovery automatically.
After you install the recovery, and get your phone booted into android, you can locate a pre-rooted rom of your choice in the forums here or at the "other" place if you prefer.
You can read more about it in this other section of the forum. The information below is from that forum, in case you can't find it or are too lazy to search.
http://forum.xda-developers.com/showthread.php?t=705026
Latest version :
IMG (fastboot or flash_image method): recovery-RA-supersonic-v2.2.1.img - MD5Sum: c9a28b8be2c97e5805d530ed991b26fe
PC36IMG (bootloader method) : PC36IMG-Amon-V2.2.1.zip - MD5SUM: 26eadae1e206784d0bb9426f24f4303d

Thanks, I was planning to do this but Im more concerened about my sd card, The phone boots well with out the sd card now, So I was planning to install the zip later. Thanks though I really appreciate the help and thoroughness of your answer which is great. But do you by anychance know what I can to do to recover the card back?

deolarte said:
-not visible in pc
Click to expand...
Click to collapse
Not visible as a drive or not visible as one that can be formatted?

drive on one pc and not possible to be formatted on other. Not possible to format on nook, evo, camera

[Q] Big SD Problem.....HELP

Hy every body, does some one heard about SD damaged after a FAT32/EXT4 Format?
Let me explain myself:
I've SD-FROMATTED my sd, then using GPARTED LIVE SD in my HD2 in MAGLDR
i've created two partitions:
1/ FAT32
2/ EXT4
I do have click on "apply".
Now, my SD is unreadable and unrecognized by my phone.
The oly way i have to use it now is FAT32 only.
It is the third time i do the partitioning on this SD and it's the first time it does'nt work
HEEELP!!!
I've heard about file corruption using MAGLDR USB MassStg...Is-it true
Thanks for your anwers

No answer? Nobody?

download panasonic SD Formatter 3.0 and that will sort it no probs.
matt

Try Panasonic SD Formatter as mentioned above. With the stock SD card I've had problems formatting using a card reader, however. I had to flash back to a windows mobile rom, connect to PC as a hard drive (not active sync) and re-format the card via that method. It's a pain, but try this if you're really stuck.

Thanks i'll try those methodes

i use minitool partition manager
but first go to control panes, then computer management, devices, find your sd card and right click on it. select create new disk label and that should solve your problem.
now after that run minitool partition manager and you 'll be able to see your sd car as new disk (or something) just create a new partition as (fat32, primary) format maybe that could solve your problem.
(the same thing happen to mee and i was about to cry because of it)
(sorrry for bad english, i'm still learning)

Thanks kof102. I'm on it

ttersu said:
Hy every body, does some one heard about SD damaged after a FAT32/EXT4 Format?
Let me explain myself:
I've SD-FROMATTED my sd, then using GPARTED LIVE SD in my HD2 in MAGLDR
i've created two partitions:
1/ FAT32
2/ EXT4
I do have click on "apply".
Now, my SD is unreadable and unrecognized by my phone.
The oly way i have to use it now is FAT32 only.
It is the third time i do the partitioning on this SD and it's the first time it does'nt work
HEEELP!!!
I've heard about file corruption using MAGLDR USB MassStg...Is-it true
Thanks for your anwers
Click to expand...
Click to collapse
Also, as a long time Android recovery user (I went through several Android phones before coming around to the HD2), I would highly recommend formatting your card using Clockwork Recovery.

HyoImowano said:
Also, as a long time Android recovery user (I went through several Android phones before coming around to the HD2), I would highly recommend formatting your card using Clockwork Recovery.
Click to expand...
Click to collapse
One problem can be that when try create a Ext partition using CWR it only creates an Ext2 which isn't really the best.

I've seen on differnt French forums that i'm not alone. Is there a Risk formatting and partitioning an SD Card, that is not done for, to damage allocation Table?
My SD is dead now. Not even my PC, my Phone or else are abble to find my SD. Have you heard about that?

No answer? No body?

try using EASEUS Partition Master 7.0.1 Home Edition with this u will be able to see what is going on.. hope it helps.

Thanks, Have you allready heard about that befor?

I had a problem with my SD it didn't come up on my pc too,when I was playing with the dual booting partition making for wp7 and android. some how it messed up and SD didn't come up so I found this program Easeus and some how managed it to work again it was a simple problem that all I had to do is to recreate the partition and only after that u can format it. if it doesn't exist u format nothing actualy lol.
hope u have the same problem.

I've tried EASUS but it was unable to read my SD...
I think it's dead now...
I've bought an other one and part it with CWM. It's EXT2 but it work perfectly!
Maybe it could be nice to check if nobody else had the same than me...and tell it to Master COTULLA!

No body else?

[Q] Problems with dual boot Phiremod/HC update, expanding sd card etc.

Can anyone help me out with updating the dual boot Phiremod/HC install?
My pc is a Windows 7 64-bit and I'm having absolutely no luck expanding the sd card to use the full 8GB.
Windows 7 and Easeus don't see the partitions, and Gparted does, but won't let me expand to include the free space (listed as unallocated).
I finally managed to mount the sd card via ADB, and have copied the phiremod update zip there, but when I try to install it, I get an error (bad) and after a restart, the file has vanished from the partition.
I'm very new at this, but can usually follow detailed instructions.

Here's what I did to update to 6.3:
Insert SD Card into my computer's card reader
Download EASUS Partition Manager (also using W7 64-bit)
Take the SD Card partition (#6 I believe) and extend it using the unallocated space left (mine was about 6Gb left on my 8Gb card)
Run the job in the partition manager
Throw SD Card and boot into Phiremod 6.2
connect to computer via USB and copy the 6.3 update to the SD Card
reboot in recovery, clear cache and dalvik cache (under advanced)
flash the 6.3 update zip
Mine hung at the android... screen for about 10min then I did a hard reboot and it fired up and has been working fine.
I was getting gmail force closes until I wiped cache and dalvik cache so I added that step in before flashing.
Let me know how it goes!

Ummm.... yeah, what he said above.
Thanks "toosurreal01"
It's great when a community like this helps each other out.
-Racks

toosurreal01 said:
Here's what I did to update to 6.3:
Insert SD Card into my computer's card reader
Download EASUS Partition Manager (also using W7 64-bit)
Take the SD Card partition (#6 I believe) and extend it using the unallocated space left (mine was about 6Gb left on my 8Gb card)
Let me know how it goes!
Click to expand...
Click to collapse
Thanks for the step by step instructions, but for me the buck stops at trying to extend the partition. Easus only sees the boot partition. Gparted shows all the partitions, but won't extend the sd partition. It looks like it should work (lets me drag the extender thingy), but when I apply the action, it reverts back to the original, with no error message. Just doesn't do it.
Should I start over and reformat the card?

It wouldn't hurt. Only thing you would lose are apps you've installed.
You could always use Titanium Backup for that though.
If you do reformat make sure you do a full format and not a "quick" one so no data is still lingering on the card.
Let us know how it goes!

siskiou said:
Thanks for the step by step instructions, but for me the buck stops at trying to extend the partition. Easus only sees the boot partition. Gparted shows all the partitions, but won't extend the sd partition. It looks like it should work (lets me drag the extender thingy), but when I apply the action, it reverts back to the original, with no error message. Just doesn't do it.
Should I start over and reformat the card?
Click to expand...
Click to collapse
Just a shot in the dark. But did you unmount the partitions first before applyin your changes in EAsus?

racks11479 said:
Just a shot in the dark. But did you unmount the partitions first before applyin your changes in EAsus?
Click to expand...
Click to collapse
Hm, no, I don't think so.
How would I do that? Card in Nook, or in PC?
Again, Easus only shows the boot partition, and nothing else.

siskiou said:
Hm, no, I don't think so.
How would I do that? Card in Nook, or in PC?
Again, Easus only shows the boot partition, and nothing else.
Click to expand...
Click to collapse
I meant gparted. Sorry. Did u unmount the partition before attempting to extend it?
And when doing so. Please don't do it while card is in nook. Only when its in PC directly with a nmicrosd card reader
Sent from my NookColor using Tapatalk

racks11479 said:
I meant gparted. Sorry. Did u unmount the partition before attempting to extend it?
And when doing so. Please don't do it while card is in nook. Only when its in PC directly with a nmicrosd card reader
Click to expand...
Click to collapse
Ah, do I need a usb micro sd card reader?
I only have a regular size sd card adapter for it.
And no, I didn't unmount the partition. I checked earlier, but there is no such option in the gparted menu, and I don't have much advanced partitioning knowledge.
A google search didn't help much.
Would appreciate if you could tell me how to do this!

siskiou said:
Ah, do I need a usb micro sd card reader?
I only have a regular size sd card adapter for it.
And no, I didn't unmount the partition. I checked earlier, but there is no such option in the gparted menu, and I don't have much advanced partitioning knowledge.
A google search didn't help much.
Would appreciate if you could tell me how to do this!
Click to expand...
Click to collapse
It is preferred to use a micro sdcard reader. I assume you are using a Linux box or live CD with gparted. But there should definitely be a n option for you to unmount the partition. You will not be able to make any changes to mounted partitions.
Right click over the partition that you want to work with. It should give you a menu. And unmount should be one of the options.
Sent from my NookColor using Tapatalk

racks11479 said:
Right click over the partition that you want to work with. It should give you a menu. And unmount should be one of the options.
Click to expand...
Click to collapse
Thanks for all your help!
I'm using a live cd on a Win 7 pc, and there is definitely no unmount option in the right click menu when I boot into gparted. Not even a greyed out one.
I'll try and burn another cd and see if that changes things.

siskiou said:
Thanks for all your help!
I'm using a live cd on a Win 7 pc, and there is definitely no unmount option in the right click menu when I boot into gparted. Not even a greyed out one.
I'll try and burn another cd and see if that changes things.
Click to expand...
Click to collapse
That is very strange. There should always be an umoint option for partitions if gparyed recoginizes the drive. Hmmmm.... which version of Ubuntu are you using?
Sent from my NookColor using Tapatalk

I downloaded the Gparted live version 0.8.1-3.iso.

siskiou said:
I downloaded the Gparted live version 0.8.1-3.iso.
Click to expand...
Click to collapse
Yeah. Then there shouldn't be an issue. :/
It might just be an issue with your card reader.
Sent from my NookColor using Tapatalk

Thanks again. I'll report back in once I get a usb card reader!

racks11479 said:
It might just be an issue with your card reader.
Click to expand...
Click to collapse
Got a card reader and Easeus and Win 7 Disk Management can now see all the partitions.
No luck expanding the sd partition, though. The action seems to happen, but then everything reverts back to what it was originally.
No mount/unmount option anywhere to be found, not with Easeus, nor with Gparted or Win 7.
I'm out of ideas at this point and will reformat the card and start over.
Edited to add: Aaand I'm now having trouble doing *that*, too.
Tried it on the pc: no go.
Tried it on the Nook: it claimed the card was sucessfully formatted in about 1 sec, and then got stuck on that notice.
Waited 5 minutes, still stuck. Turned it off and back on, and Nook booted into Phiremod.
Any ideas how I can reformat this demon card?
Edited to add: Am now using a low level formatting tool and get "format error occurred at offset ...". The program is still running and seems to be formatting the rest of the card.
Does this sound like the sd card is damaged?

A couple other options for you to try:
SD Formatter 3.0 - Made specifically to format SD cards - http://www.sdcard.org/consumers/formatter_3/
Partition Wizard - This is the software I used to extend the SD Card partition. Really simple to use - http://download.cnet.com/Partition-Wizard-Home-Edition/3000-2094_4-10962200.html?tag=mncol;7
I would try formatting the SD card, reinstalling the dualboot image, the using Partition Wizard to extend the SD card partition.
As far as updating, I haven't tried the newest update the when I updated from 6.1 to 6.2 I plugged my Nook into my computer, dropped the update file onto the Nook's internal memory, then moved it to the SD card with the Root Explorer app.
Hope any of that helps. Good luck!

kwyrt said:
A couple other options for you to try:
Click to expand...
Click to collapse
Thanks! I will give those a try, since everything was still on the card after the low level format.
Who knew that reformatting would be such a problem!
Did you have to unmount the sd partition, before extending it?

I extended the partition with Partition Wizard immediately after burning the dual boot image. Never messed with mounting or unmounting anything. I'm a little new to this myself really. Why would you need to mount the SD card partition?

I didn't think I had to, but racks11479 mentioned it as a possible solution in this thread, so I thought I'd ask.
None of the programs had any success in reformatting my card, so I returned it to the store and got a replacement.
Now I'm very ambivalent about trying again and possibly messing up another card.
Can anyone here think of anything that I might have done (or should have done) to cause the card to act this way?
And if anyone feels like posting a baby step guide for someone like me, I'd very much appreciate it!
Edited to add: I just found the following
*********
It also will produce a multi partition removable disk for which windows will not allow you to re-partition. If you want to get back to "normal" disk you can reformat it with Hewlett-Packard Company's HPUSBFW.exe
***********
Also, I used an old 2GB card to reformat my NC (went fabulously easy) and then reformatted that and tried a CM7 rom, which worked, but was way too slow. This reformatted again, without any problems, so I'm not sure if the above statement (regarding bootable sd cards) is correct or not.
And if anyone feels like posting a baby step guide for someone like me, I'd very much appreciate it!

[Magldr] 'AD SD dir' directory; reverts to main menu

Hey, I've tried installing Magldr a few times now, but whenever I try to go to "Services\BootSettings\AD SD Dir" it just goes back to the Magldr menu.
I've done some searching for the past couple of hours, and the general consensus was to reformat the sdcard because Magldr couldn't read the sdcard, I've tried reformatting multiple times (once via Windows quick format, once via Windows full format, and twice by EASEUS Partition Master) but can't seem to get this to work.
I was coming from CLK, the main reason I wanted to try dual booting two Android ROMs, one via NAND and the other via the SDCARD.

parker09 said:
Hey, I've tried installing Magldr a few times now, but whenever I try to go to "Services\BootSettings\AD SD Dir" it just goes back to the Magldr menu.
I've done some searching for the past couple of hours, and the general consensus was to reformat the sdcard because Magldr couldn't read the sdcard, I've tried reformatting multiple times (once via Windows quick format, once via Windows full format, and twice by EASEUS Partition Master) but can't seem to get this to work.
I was coming from CLK, the main reason I wanted to try dual booting two Android ROMs, one via NAND and the other via the SDCARD.
Click to expand...
Click to collapse
the option you tried is used in order to run sd-card roms, not for nand roms. to flash nand rom by mgldr, you must make the cwm partition as said in op of rom. then in mgldr-ad recovery-install zip from sd-choose zip from sd-find rom in list- flash and reboot.

The way I usually do it is flash the magldr nand ROM via clockworkmod and then copy the the extract the sdcard ROM to the root of the sdcard - and follow the specific instructions for the sdcard ROM.

parker09 said:
Hey, I've tried installing Magldr a few times now, but whenever I try to go to "Services\BootSettings\AD SD Dir" it just goes back to the Magldr menu.
I've done some searching for the past couple of hours, and the general consensus was to reformat the sdcard because Magldr couldn't read the sdcard, I've tried reformatting multiple times (once via Windows quick format, once via Windows full format, and twice by EASEUS Partition Master) but can't seem to get this to work.
I was coming from CLK, the main reason I wanted to try dual booting two Android ROMs, one via NAND and the other via the SDCARD.
Click to expand...
Click to collapse
In this case MAGLDR does not work with your SD Card for SD builds. I have this same problem with my Kingston 16GB class 4, but MAGLDR works fine with the shipped Sandisk 2GB class 2 (i.e. I can run SD builds from this but not the Kingston).

Ah okay, yeah, tried a Sandisk 16gb card and it worked, I had a 8GB Kingston (cls4) card, will look around for a new one as I took the Sandisk from my camera.

I know this was an old question but I'll throw my input in just incase this helps somebody in future..?
If you have been messing around with partition managment software make sure you set the FAT32 partition as Primary and not just logical...
Worked for me
Cheers, Adam.

API182 said:
I know this was an old question but I'll throw my input in just incase this helps somebody in future..?
If you have been messing around with partition managment software make sure you set the FAT32 partition as Primary and not just logical...
Worked for me
Cheers, Adam.
Click to expand...
Click to collapse
I have two sd cards. And with the kingstom I have this problem, all partitions are primary.

stay in the magldr,
take the SD card out ,
and insert SD card again,
then try \AD SD Dir again,
you got it

ck436 said:
stay in the magldr,
take the SD card out ,
and insert SD card again,
then try \AD SD Dir again,
you got it
Click to expand...
Click to collapse
Until the next time or two you reboot then no more boot directory again.
But yes, popping the card out will enable you to try the process - but you'll need another make of card for it to be reliable.