Database Users

[Q] A2SD on Gingerbread ROM

Hey, I hope I may ask here too, to reach more People .
I've heard much about A2SD+. But most of the time it says only for FroYo, some say you can implement it to Gingerbread too, others say the ROM must already have it.
So I use Gingerbread ROM Oxygen RC 7 .
Is it possible to enable A2SD+ here? If so, how?

http://forum.xda-developers.com/showthread.php?t=925996

I am using the ClockworkMod Recovery and was following the guide ( http://www.facebook.com/note.php?not...58809660835039 ) but there is no partition SD-card or similiar.. only format, and that doesn't help anything

Urool said:
I am using the ClockworkMod Recovery and was following the guide ( http://www.facebook.com/note.php?not...58809660835039 ) but there is no partition SD-card or similiar.. only format, and that doesn't help anything
Click to expand...
Click to collapse
there are commands to upgrade from ext3 to 4

[Q] HTC HD2 help - android back to STOCK winMO 6.5

Hello, guys.
I want back to stock because of service reasons. I have cyanogenmod 3.7.0, android version 2.3.6
Now I downloaded the file (6.5 update) from HTC sites, and I'm curious about few things. The file contain 210 mb or so, and on my HTC I have 199 mb left on the internal memory - could this occure any problems regarding the install?
Also, I downloaded Minitool partition wizzard program to delete all partitions on my SD card and return back to FAT32.
Is this a hard task? Please, I really need help!!
Also after all this has been done, should I turn off the phone, hold volume down button and power on and get into boot mode, plug in USB, wait for USB-recognision, and then just run the file I downloaded from HTC?
Please help!!
#thanks to tmihai20 for help!

Nicuu said:
Hello, guys.
I want back to stock because of service reasons. I have cyanogenmod 3.7.0, android version 2.3.6
Now I downloaded the file (6.5 update) from HTC sites, and I'm curious about few things. The file contain 210 mb or so, and on my HTC I have 199 mb left on the internal memory - could this occure any problems regarding the install?
Also, I downloaded Minitool partition wizzard program to delete all partitions on my SD card and return back to FAT32.
Is this a hard task? Please, I really need help!!
Also after all this has been done, should I turn off the phone, hold volume down button and power on and get into boot mode, plug in USB, wait for USB-recognision, and then just run the file I downloaded from HTC?
Please help!!
#thanks to tmihai20 for help!
Click to expand...
Click to collapse
I would guess those steps are fine, and how would your internal storage have any effect on flashing a new ROM which overwrites it anyway? But yeah, you should be good to go now.

Nigeldg said:
I would guess those steps are fine, and how would your internal storage have any effect on flashing a new ROM which overwrites it anyway? But yeah, you should be good to go now.
Click to expand...
Click to collapse
Alright, thanks!
But I should unmount the SD-card by doing it the safe way, delete partitions, make FAT32, mount in - turn off phone and then flash the rom?
This is the rom i downloaded from htc
RUU_Leo_S_HTC_NOR_3.14.409.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
At least this is what it's named. Thanks for any help!!

@OP: Please go to advanced edition and change the title pf the thread properly. Thanks
3. Post only using a clear subject and message.
You're most likely to receive a helpful answer to your question if you use a short subject title that describes your problem and a message that explains in detail what your problem is and what you've tried to solve it.
Click to expand...
Click to collapse

poyensa said:
@OP: Please go to advanced edition and change the title pf the thread properly. Thanks
Click to expand...
Click to collapse
Oh, I'm sorry. I would, but I can't figure out (sorry, yes I'm a nòob)

Nicuu said:
Oh, I'm sorry. I would, but I can't figure out (sorry, yes I'm a nòob)
Click to expand...
Click to collapse
Go to your post 1 at top of this page, click edit then click advanced and change the title.

Try installing the MIUI version it works great on the HD2, i had many issues with wm6.5 and other NAND. I have been using MIUI for about 1 year now, weekly updates and very stable

alanman said:
Try installing the MIUI version it works great on the HD2, i had many issues with wm6.5 and other NAND. I have been using MIUI for about 1 year now, weekly updates and very stable
Click to expand...
Click to collapse
Oh yeah? Do you have the t-mobile version of htc HD2?
And by NAND, you mean other roms probably.
Could perhaps give it a try, but I think my phone has a motherboard problem, as it overheats very fast.
Haven't you had any problems with MIUI? which miui do u use?

SD Card Problem In CM10 For Ideos S7 10x

Hello Everyone
two days before..i installed CM10 for ideos S7 10x (the old fat one)
a big thanks to the DEVs who made it possible.
i face few problems in it
1. wifi...stops working when the tab is in standby + i have to restart the tab to get it working ( it was already mentioned that one will face such problem) but, i have heard that there's a fix for it too...is that true..? i tried searching..but got nothing
2. My SD Card is not recognized by the tab...its says..no storage found...so i formatted my sd card...and did everything..then downloaded an app from store..to view pics..and it was detecting my pics which was in sd card.So anyone knows whats wrong..? because i cannot download anything...any apps or any stuff i want. So anyone knows what can i do..? or i should wait for it..?
3.USB mount doesnt works.I have to do it by going to CWM by mounting it.
rest..everything i have tried till now is freaking FANTASTIC
Kudos TO you Guys
Thank you
Hope to see more for Ideos s7

BUMP
no help..?

those are recognized bugs in the cm10 release.
wait for a fix or use cm9

I have ideos s7 10x the older one
I tried cm9 but it asks for password

i use that version too and when it asks for password i just reboot and wait

Hi, i was using the froyofusion until a few days ago, found a cm10 version in a russian site, was the 1º that worked for mine s7-105, the sdcard works, it is mounted in /sdcard1 the old froyo was on /mnt/sdcard2, wifi works, sound gives a sound bip every 30 seconds, anoying bug, the rest still trying.
my version is PA-4.1.2-Touch-Angel, what version cm10 are you using ?
hal_2000

hal_2000 said:
Hi, i was using the froyofusion until a few days ago, found a cm10 version in a russian site, was the 1º that worked for mine s7-105, the sdcard works, it is mounted in /sdcard1 the old froyo was on /mnt/sdcard2, wifi works, sound gives a sound bip every 30 seconds, anoying bug, the rest still trying.
my version is PA-4.1.2-Touch-Angel, what version cm10 are you using ?
hal_2000
Click to expand...
Click to collapse
even i am using PA-4.1.2-Touch-Angel...its not cm10 but its a rom based on cm10. its paranoid android and its working fine with me too

help
ethical ricado said:
even i am using PA-4.1.2-Touch-Angel...its not cm10 but its a rom based on cm10. its paranoid android and its working fine with me too
Click to expand...
Click to collapse
hi to install this rom whether we have to replace the boot.img files or just copy it into the card and install using cw recovery mode

cm10 on huawei ideos S7(105)
ethical ricado said:
Hello Everyone
two days before..i installed CM10 for ideos S7 10x (the old fat one)
a big thanks to the DEVs who made it possible.
i face few problems in it
1. wifi...stops working when the tab is in standby + i have to restart the tab to get it working ( it was already mentioned that one will face such problem) but, i have heard that there's a fix for it too...is that true..? i tried searching..but got nothing
2. My SD Card is not recognized by the tab...its says..no storage found...so i formatted my sd card...and did everything..then downloaded an app from store..to view pics..and it was detecting my pics which was in sd card.So anyone knows whats wrong..? because i cannot download anything...any apps or any stuff i want. So anyone knows what can i do..? or i should wait for it..?
3.USB mount doesnt works.I have to do it by going to CWM by mounting it.
rest..everything i have tried till now is freaking FANTASTIC
Kudos TO you Guys
Thank you
Hope to see more for Ideos s7
Click to expand...
Click to collapse
Hi,
Can you explain how you did(installation),step by step please: Confused:I w'd like to do the same.Thx

[Q] Sd-ext NOT visible in CWM, how to backup & restore sd-ext?

Hello guys,
I try level best to find the solutions to the problems on my own, but at times like this i have no way other than to bother you.
Here's the problem:
Cannot see the sd-ext partition in the CWM recovery.
Do not get the backup of my sd-ext partition after making backup of the device.
'Restore sd-ext' IS available in 'Advanced Restore' options, but when to use since there's no backup being made.
and so every other problem which may arrive due to this.
Details:
Rom: Jellyblast3.0.4
Kernel: RepencisV7 Final
CWM tried: cwm-madteam-galaxY.zip, CWM_bla_bla.zip, CWMv5-Skin1980-GT-S5360.zip
Everything is in native rfs format
sd-ext is formatted with ext2
Using A2sd by Darktremor
sd-ext IS mounted and working fine(screenshots)
No additional tweaks by me.
Only ten scripts in init.d(attached)
CWM Error Report: ...backing up cache..sd-ext not found..
skipping backup of sd-ext. Creating md5 sum..backup complete. (log attached)
Please let me know..
if any other data/detail is required.​
I don't know what's the cause of this problem, though i feel like it might be something related to the kernel.
And also since its Repencis kernel i don't have any clear idea about whom to approach!
And thus made an individual thread for this peculiar problem.
Hopefully, looking forward to find a solution to this problem.

MaestroCharan said:
Hello guys,
I try level best to find the solutions to the problems on my own, but at times like this i have no way other than to bother you.
Here's the problem:
Cannot see the sd-ext partition in the CWM recovery.
Do not get the backup of my sd-ext partition after making backup of the device.
'Restore sd-ext' IS available in 'Advanced Restore' options, but when to use since there's no backup being made.
and so every other problem which may arrive due to this.
Details:
Rom: Jellyblast3.0.4
Kernel: RepencisV7 Final
CWM tried: cwm-madteam-galaxY.zip, CWMv5-Skin1980-GT-S5360.zip
Everything is in native rfs format
Using A2sd by Darktremor
sd-ext IS mounted and working fine(screenshots)
No additional tweaks by me.
Only ten scripts in init.d(attached)
Please let me know..
if any other data/detail is required.​
I don't know what's the cause of this problem, though i feel like it might be something related to the kernel.
And also since its Repencis kernel i don't have any clear idea about whom to approach!
And thus made an individual thread for this peculiar problem.
Hopefully, looking forward to find a solution to this problem.
Click to expand...
Click to collapse
Try cwm downloaded from somewhere else eg cwm bla bla.zip
If that doesn't work try savis kernel
w8 I will give a link to cwm that I use
Here u go
cwm_bla_bla.zip
All noob and other questions must go here
..............."lts not who u r inside...................
............its wat u do that defines u".............

Used that CWM too!!
sanny5 said:
Try cwm downloaded from somewhere else eg cwm bla bla.zip
If that doesn't work try savis kernel
w8 I will give a link to cwm that I use
Here u go
cwm_bla_bla.zip
All noob and other questions must go here
..............."lts not who u r inside...................
............its wat u do that defines u".............
Click to expand...
Click to collapse
Thankyou sir for your kind interest, but i have used that CWM also.
And talking about kernel sir, i would first prefer to solve this problem then think of opting to 'alternative' solutions.
Because i prefer full a2sd support, i settled with this kernel after testing many.

The only kernel that supports backup of ext is whitesxp kernel
Flash this kernel and the perm cwm included with it will support backup of ext partition although creating a nandriod backup is much slower than with other kernels

marcussmith2626 said:
The only kernel that supports backup of ext is whitesxp kernel
Flash this kernel and the perm cwm included with it will support backup of ext partition although creating a nandriod backup is much slower than with other kernels
Click to expand...
Click to collapse
Sent from my GT-S5360 using Tapatalk 2
Hello marcussmith2626,
I once also tried Merruk kernel and it also used to make the backup of sd-ext when making backup of the device.
In fact. . .its a common thing.
Whenever backups are being made, if sd-ext is present then its backup is automatically made by CWM.
The problem is, in my case its not happening like that.
And about WhiteXP's kernel..
do it support a2sd?
I did try this kernel too. . .but didn't use it for long..since appeared as if it was draining my battery fast.

marcussmith2626 said:
The only kernel that supports backup of ext is whitesxp kernel
Flash this kernel and the perm cwm included with it will support backup of ext partition although creating a nandriod backup is much slower than with other kernels
Click to expand...
Click to collapse
You sure? I swear I remember using the CWM with whitexp's kernel 1.3.3 and I lost my sd-ext data upon backing up and then restoring.
Sent from my Quad-core 1.5GHz 512MB RAM GT-S5360 using xda premium

Mitko said:
You sure? I swear I remember using the CWM with whitexp's kernel 1.3.3 and I lost my sd-ext data upon backing up and then restoring.
Sent from my Quad-core 1.5GHz 512MB RAM GT-S5360 using xda premium
Click to expand...
Click to collapse
Use whitexp's kernel and your ext partition should be ext3 . I noticed that Ext3 format is the only format which supported backing up and restoring sd-ext partition successfully. That's my experience . You may like to try.

try this bro maybe it will u...
http://db.tt/kEVjIdKf

rkmiks said:
Use whitexp's kernel and your ext partition should be ext3 . I noticed that Ext3 format is the only format which supported backing up and restoring sd-ext partition successfully. That's my experience . You may like to try.
Click to expand...
Click to collapse
Thank you sir rkmiks,
that is indeed one good information. Currently I'm with ext2 formatted sd partition.
I will try re -formatting and report back.
post1 updated : info added. sd-ext format type, CWM Error log and report.
Sent from my GT-S5360 using Tapatalk 2

will try and report back!
blackpanther2209 said:
try this bro maybe it will u...
http://db.tt/kEVjIdKf
Click to expand...
Click to collapse
Ok sir, i'll try and report back.

MaestroCharan said:
Thank you sir rkmiks,
that is indeed one good information. Currently I'm with ext2 formatted sd partition.
I will try re -formatting and report back.
post1 updated : info added. sd-ext format type, CWM Error log and report.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
And remember I had that working on whiteXp kernel and savies kernel . Not on others.

MaestroCharan said:
Ok sir, i'll try and report back.
Click to expand...
Click to collapse
Sorry bro i think the link is broken...just use this link...sorry again.
http://db.tt/Q1BHXLdI
Sent from my GT-S5360 using Xparent Blue Tapatalk 2

Man thats working, solves my problem
blackpanther2209 said:
try this bro maybe it will u...
http://db.tt/kEVjIdKf
Click to expand...
Click to collapse
ThankYou blackpanther2209 :good:, the CWM you provided solved my problem
It detected sd-ext..:good:
manually mounted it..:good:
made the backup of sd-ext..:good:
checked it in sd card..:good:
Restored it..:good:
All good and working :highfive:
But how is it working, when other CWM of the same version (i.e 5.0.2.6) are unable to detect my ext2 partition?

ThankYou all for your support
ThankYou all..:angel:
sanny5
marcussmith2626
Mitko
rkmiks
and specially..blackpanther2209
for helping me find the solution to my problem. :highfive:
Out of thanks for today, will finish thanking tmrw

Somebody posted it i forgot his name,since then i use this cwm coz i have no problem in doing back up and even formatting or partitioning sdcard.
Sent from my GT-S5360 using Xparent Blue Tapatalk 2

Try using another memory card. Some memory cards act like that
Sent from my HTC Sensation 4G using xda premium

esekruzzz said:
Try using another memory card. Some memory cards act like that
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Well, I don't think that's needed now. I already found a working version of CWM which solved MY problem.
(though I still don't know why other CWMs didn't detect my other partition :banghead: )
Sent from my GT-S5360 using Tapatalk 2

HI I'm having the same problem. Can you repost the version that found your sd-ext to see if it solves mine.
The link isn't working above
I have it recognised on a previous rom but now it won't restore the backups to it.
thank
edit....
Clicked on the correct link and it worked for me.
The cwm there was incompatible with my ace-i
MaestroCharan said:
Well, I don't think that's needed now. I already found a working version of CWM which solved MY problem.
(though I still don't know why other CWMs didn't detect my other partition :banghead: )
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse

help me too please
i have been to every single stinkin forum about this topic, and it seem that you guys know what you are talking about- my phone- galaxy s gt-i9000 or something like that- long story short- battery died. nothing else happened, and now it will not boot back up. I figured out how to get to the dark core recovery- yet wiping, restoring, mounting, unmounting, formatting, etc- i get the same message- ERROR. I downloaded something named "kies" thinking that would help (looking at a different forum) and it doesnt even recognize that the phone is connected via USB. I just bought this stupid phone from a "friend" 3 months ago, and i really cant afford to get another one. I, in the mean time, am stuck using my daughters old phone that looks like a spider decided to hide behind the screen and make a home for itself. Please HELP!!!!
ps- i am not as smart as i may have sounded above, so please be gentle and use terms, (actually links to take me to some site that will just do it all for me I prefer LOL) that a really cute hot 20 something blonde could understand smootches!!! and PS- i used to be blonde, not anymore, no offense to all others out there.:silly:

desonly said:
i have been to every single stinkin forum about this topic, and it seem that you guys know what you are talking about- my phone- galaxy s gt-i9000 or something like that- long story short- battery died. nothing else happened, and now it will not boot back up. I figured out how to get to the dark core recovery- yet wiping, restoring, mounting, unmounting, formatting, etc- i get the same message- ERROR. I downloaded something named "kies" thinking that would help (looking at a different forum) and it doesnt even recognize that the phone is connected via USB. I just bought this stupid phone from a "friend" 3 months ago, and i really cant afford to get another one. I, in the mean time, am stuck using my daughters old phone that looks like a spider decided to hide behind the screen and make a home for itself. Please HELP!!!!
ps- i am not as smart as i may have sounded above, so please be gentle and use terms, (actually links to take me to some site that will just do it all for me I prefer LOL) that a really cute hot 20 something blonde could understand smootches!!! and PS- i used to be blonde, not anymore, no offense to all others out there.:silly:
Click to expand...
Click to collapse
This is a forum for galaxy y
but if your phone doesn't boot
Find the stock rom for your phone
Connect your phone to pc
Enter download mode (on galaxy y it's hold volume down home button & power button)
start odin on pc - see http://forum.xda-developers.com/showthread.php?t=1738841
Place the stock rom tar files in correct place and flash

[Q] a problem with pacman rom

hi. i love pac-man rom. now i am using pac man rom for about 2 mounth but it usually auto display force close application when i open a new app or reccive call, sms mail.... iam using nativesd pacman with 1,5GB ext4 partition (wp7.8 nand, mar1.13, total 8GB card), one can heip me? but another android os using ad-sd not having problem. if possiple: some try help convert a nastivesd rom to ad-sd rom??? thanks alot, sorry for my english.

Before doing anything extreme, try fixing permission. It usually fixes force closes. You're using NativeSD which I'm not familiar with, I don't know where to find recovery. Maybe boot one up from the sdcard?

Marvlesz said:
Before doing anything extreme, try fixing permission. It usually fixes force closes. You're using NativeSD which I'm not familiar with, I don't know where to find recovery. Maybe boot one up from the sdcard?
Click to expand...
Click to collapse
i have used " fix permission" for many time, no change, often display "force close" then i cant not do anything with my phone, i have just tried to intall some other rom with nastivesd, and i got the same problem .but other rom used 'mag sd" some time it show "....app not respondent "and i chose "wait " in screen .then after a verry little time it work well. so i hope some one hepl me, or show me the way to convert a nastive sd rom to mag sd rom. tks
sorry for my english