I have partitioned the sd card to use link2sd when i used the jellyblast v3 rom.!But now,i am using the creed rom v3.5 .So iwant to unpartition the sdcard,i want the sdcard original storage!!How should i do?please help me"" :-X
hacker0377 said:
I have partitioned the sd card to use link2sd when i used the jellyblast v3 rom.!But now,i am using the creed rom v3.5 .So iwant to unpartition the sdcard,i want the sdcard original storage!!How should i do?please help me"" :-X
Click to expand...
Click to collapse
just format ur sdcard.....
but before that backup all the data...
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
just format ur sdcard.....
but before that backup all the data...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Thanks!:good:
Just format your sdcard as normal.
Sent from my GT-S5360 using xda premium
Make sure u use fat32...
Or whatever the format was..
sent from galaxy next to earth
You cant simply format to unpartition the sdcard. Use any partition tool to unpartition first. Then format the whole sd card.
emjimadhu said:
You cant simply format to unpartition the sdcard. Use any partition tool to unpartition first. Then format the whole sd card.
Click to expand...
Click to collapse
its better to format than use minitool....it sometimes make things difficult...
Related
hey !
I've partitioned my sd as 256mb a2sd and my all apps are installed in that memory..but now a2sd partition is full and i cannot install any app..It says memory full( but I've 132mb left in phone's internal memory). so my question is how can i use that memory to install my apps.
wen, app2sd becomes not worthy for u, u r left with data2sd..
to enable data2sd--
1st of all delete the app2sd script..
flash any fugumod kernel..
then make a file & write in it "mmcblk0p2"..
rename the file to "fs.data2sd"
move fs.data2sd to /sdcard/Android/data/fugumod
restart..
u r done... )
Sent from my GT-I5800 using Tapatalk
now this is something new..so what will it enable?
And my question was how to install apps on internal memory( which is 132 mb free ).. how to use that memory ?
ranadip.bswas said:
wen, app2sd becomes not worthy for u, u r left with data2sd..
to enable data2sd--
1st of all delete the app2sd script..
flash any fugumod kernel..
then make a file & write in it "mmcblk0p2"..
rename the file to "fs.data2sd"
move fs.data2sd to /sdcard/Android/data/fugumod
restart..
u r done... )
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
and what is app2sd script and how to delete it ?
rahulgaba16 said:
and what is app2sd script and how to delete it ?
Click to expand...
Click to collapse
App2SD script is present in /system/etc/init.d. If you want to delete it, you can do it using root explorer. Mount system as rw and delete it.
rahulgaba16 said:
now this is something new..so what will it enable?
And my question was how to install apps on internal memory( which is 132 mb free ).. how to use that memory ?
Click to expand...
Click to collapse
that is not possible.. coz ur whole /data gettin mounted to mmcblk0p2 partition, so ur internal memory becomes useless..
***but I think that will increase ur system space... (jst a thought, correct me if I m wrong) )
Sent from my GT-I5800 using Tapatalk
ranadip.bswas said:
that is not possible.. coz ur whole /data gettin mounted to mmcblk0p2 partition, so ur internal memory becomes useless..
***but I think that will increase ur system space... (jst a thought, correct me if I m wrong) )
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Hmm. So you are saying that the whole data partition including /data/data also goes to SD with this??
dhirend_6d said:
Hmm. So you are saying that the whole data partition including /data/data also goes to SD with this??
Click to expand...
Click to collapse
yes..
Sent from my GT-I5800 using Tapatalk
ranadip.bswas said:
yes..
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
Oh. You are right then. . And also we would need an SD card of high class in order for this to work smoothly.
dhirend_6d said:
Oh. You are right then. . And also we would need an SD card of high class in order for this to work smoothly.
Click to expand...
Click to collapse
mine is 8gb of class4 .. wrkin fyn.. no lag..
Sent from my GT-I5800 using Tapatalk
ranadip.bswas said:
mine is 8gb of class4 .. wrkin fyn.. no lag..
Sent from my GT-I5800 using Tapatalk
Click to expand...
Click to collapse
but mine is of 2gb (which comes with the phone)..so is it good to use app2sd on it...and if not then how to make sd card to the original state(without wiping the phone)
rahulgaba16 said:
but mine is of 2gb (which comes with the phone)..so is it good to use app2sd on it...and if not then how to make sd card to the original state(without wiping the phone)
Click to expand...
Click to collapse
That s ok. You can use apptosd v2. But this method described here, I don t know. Since the entire data partition is moved, you would probably need atleast a class 4 SD card.
But if you want to delete the apptosd script, delete it from /data/etc/init.d using rootexplorer. But your datas will remain in the sd-ext partition only. So don t know how you are going to recover that.
dhirend_6d said:
That s ok. You can use apptosd v2. But this method described here, I don t know. Since the entire data partition is moved, you would probably need atleast a class 4 SD card.
But if you want to delete the apptosd script, delete it from /data/etc/init.d using rootexplorer. But your datas will remain in the sd-ext partition only. So don t know how you are going to recover that.
Click to expand...
Click to collapse
in that case .... i guess titanium backup
rahulgaba16 said:
in that case .... i guess titanium backup
Click to expand...
Click to collapse
if u follow my process, then, no apk will b lost.. nd if dalvik cache is included in ur app2sd script, then no data lose too..
Sent from my GT-I5800 using Tapatalk
hey someone please tell me how can i use link2sd in JELLBLAST V3.0.1
IT shows that the sd-ext can't be mounted.
Please solve this problem
I have attached the image.
1) Try setting the mount script partition to ext2/ext3/ext4 and see if anyone of them makes the mount successful (it doesnt matter with which partition it mounts with)
2) Did you partition your sd card correctly? Mention more about how you did it..
anmolsharma1293 said:
hey someone please tell me how can i use link2sd in JELLBLAST V3.0.1
IT shows that the sd-ext can't be mounted.
Please solve this problem
I have attached the image.
Click to expand...
Click to collapse
I used Minitool partition wizard home edition to partition my sd card. set the partition as fat32...didnt really like the idea and after trying a new rom, and going back to jellyblast v3.01, i removed several apps(link2sd included) by uninstalling them through titanium backup, and then used install manager v3.5.1 to move my apps to my unpartitioned sd card
I partioned my sd card using minitool...
Kuro kernel supports link2sd or i shud reformat my sd card....???
Sent from my GT-S5360 using xda app-developers app
I partioned it using minitool....
I made the sd-ext part in ext3 format....
Should i reformat the sdcard and than partion it again via cm...???
Sent from my GT-S5360 using xda app-developers app
kuro kernel supports link2sd,my expirience first partition as fat32,second as ext2-3 using minitool,no problem,no need for reformat or something in cwm.
Jelly blast has kuro kernel, it supports Link2sd, dont use mini tool, it complicates things, make it the easy way, go to CWM -> Advanced-> Partition SD card -> Give 2nd partition space-> swap as 0 and then wait till it get partitioned, now try mounting ext3 in link2sd, it must work
Thank u sir....i will try it
Sent from my GT-S5360 using xda app-developers app
Sir one more question.....
can i flash another kernel in jellyblast v3.0.1 and replace kurokernel...???
anmolsharma1293 said:
Sir one more question.....
can i flash another kernel in jellyblast v3.0.1 and replace kurokernel...???
Click to expand...
Click to collapse
Yes, my suggestion would be savies kernel rev 73, the best one out yet imo
anmolsharma1293 said:
Thank u sir....i will try it
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
bt bro before partitioning tru cwm mak backup of entire sdcard data cos partioning tru cwm formats entire sd.
Sent from my GT-S5360 using xda premium
hitme987 said:
Jelly blast has kuro kernel, it supports Link2sd, dont use mini tool, it complicates things, make it the easy way, go to CWM -> Advanced-> Partition SD card -> Give 2nd partition space-> swap as 0 and then wait till it get partitioned, now try mounting ext3 in link2sd, it must work
Click to expand...
Click to collapse
this method wiped my sd card...make a backup before you partition it this way.
Thank everyone here.....i partioned my sd card successfully and now link2sd is working.....
Sent from my GT-S5360 using xda app-developers app
Sir i tried to install it....but it is so much confusing....the instrustions given on savie's thread are insufficient....
Please tell me how can i install savie rev 73 kernel...
Thaanxx in advance...
Sent from my GT-S5360 using xda app-developers app
It's actually easy to install.
First install the basic version. The (60 I think)
Then combine the last two kernel rar files.
Then flash.
Tapatalked using my galaxy y
anmolsharma1293 said:
Sir i tried to install it....but it is so much confusing....the instrustions given on savie's thread are insufficient....
Please tell me how can i install savie rev 73 kernel...
Thaanxx in advance...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
The post is actually not aligned properly which makes people confuse.
Just download savies kernel rev 73 modded by Ronnie (just look for the same title which is a download able link).
Copy it and Cwm by mad team or skin to sd card, go to recovery mode, first flash Cwm zip, and then flash the kernel zip, it shows a aroma installer, click default installation there, restart and done, check if you got 4 io s and 18 governors, if not flash again, this time choose custom installation and select all things, reboot and it will stick
kishorsidu said:
It's actually easy to install.
First install the basic version. The (60 I think)
Then combine the last two kernel rar files.
Then flash.
Tapatalked using my galaxy y
Click to expand...
Click to collapse
That's a completely incorrect method to install that kernel since it got an aroma installer
Sent from my GT-S5360 using xda premium
thank u sir....!!!
i will install savie kernel...
All the governers are not showing in savie's kernel:what:....i used custom installation also...
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
All the governers are not showing in savie's kernel:what:....i used custom installation also...
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
Did you select all the governers in custom installation?
Wait, after flashing savies kernel, you get a permanent CWM, in which you need to click mount/system in mounts and storage option EVERYTIME you flash a zip, either it be a ROM/Kernel/Anything, ALWAYS mount/system when using savies kernel CWM
hitme987 said:
Did you select all the governers in custom installation?
Wait, after flashing savies kernel, you get a permanent CWM, in which you need to click mount/system in mounts and storage option EVERYTIME you flash a zip, either it be a ROM/Kernel/Anything, ALWAYS mount/system when using savies kernel CWM
Click to expand...
Click to collapse
sir after mounting system also it is not coming.....
i have installed it correctly......followed all the steps.....
also instaaled baecm tweaks.....
i think i have to revert back 2 stock kernel and then i have 2 again install the kernel...
Hi im on cod rom usin merruk kernel and trying to partition my sd card using the built in cwm. Usually if i use the partition sd card on temporary cwm it takes a while to complete but in the built in cwm in merruk kernel it is fast and does not partition my sd card at all. Btw im using mt kernel dev edition 7
Sent from my gY CoD rom by D.J. and merruk dev edition 7+ext4
mount storage before partition.
there is a alternate using mini tool partition
shivang005 said:
there is a alternate using mini tool partition
Click to expand...
Click to collapse
landlord28 said:
Hi im on cod rom usin merruk kernel and trying to partition my sd card using the built in cwm. Usually if i use the partition sd card on temporary cwm it takes a while to complete but in the built in cwm in merruk kernel it is fast and does not partition my sd card at all. Btw im using mt kernel dev edition 7
Sent from my gY CoD rom by D.J. and merruk dev edition 7+ext4
Click to expand...
Click to collapse
MOUNT sdcard before partioning ur sdcard....
and prefer cwm over minitool to partion ur sd card.....
anmolsharma1293 said:
MOUNT sdcard before partioning ur sdcard....
and prefer cwm over minitool to partion ur sd card.....
Click to expand...
Click to collapse
minitool can partition without losing data. i used cwm to partition and my sd card was wiped clean
Thanks for reply guys it worxnow )
Sent from my GT-S5360 using xda premium
xfactor_ro said:
minitool can partition without losing data. i used cwm to partition and my sd card was wiped clean
Click to expand...
Click to collapse
Minitool creates problem sumtimes....thats why i prefer cwm.....
Sent from my GT-S5360 using xda app-developers app
landlord28 said:
Hi im on cod rom usin merruk kernel and trying to partition my sd card using the built in cwm. Usually if i use the partition sd card on temporary cwm it takes a while to complete but in the built in cwm in merruk kernel it is fast and does not partition my sd card at all. Btw im using mt kernel dev edition 7
Sent from my gY CoD rom by D.J. and merruk dev edition 7+ext4
Click to expand...
Click to collapse
I'm also facing same problem
=========================================
Galaxy Y users Click here for 1.2Ghz and 1Gb internel
I followed the tutorial by Sir CarlDeanCatabay to increase the Internal Memory by partitioning SD Card using Mini-Tool Partition Wizard. I first made my 2nd Partition as EXT4(as Merruk 2.5 supports EXT4), but, Link2SD was unable to mount script. I tried with both EXT2 and EXT3, but, the same result came. I saw another external tutorial which said to make the 2nd Partition FAT32; I did, and Link2SD was able to mount. I installed some Apps and LWPs, and Link2SD said that it was link to the SD Card. When I looked upon the Storage Info in Link2SD Menu, I saw my 2nd Partition as same as it was at first, but, my Primary Android-SD(it was set as Active during partition) was filled with 35 MB out of my knowledge.. Isn't link2sd linking my apps to the 2nd Partition and instead doing so to SD Main? If so, what should I do? Thanks!
I think u must prefer cwm method....as it is easy and doesn't creates problem
Sent from my GT-S5360 using xda app-developers app
anmolsharma1293 said:
I think u must prefer cwm method....as it is easy and doesn't creates problem
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
I wish I'd have done that, I've already partitioned...I'm also not so sure if it is linking or not..
Ritayan Roy said:
I wish I'd have done that, I've already partitioned...I'm also not so sure if it is linking or not..
Click to expand...
Click to collapse
Do this....
First backup ur sdcard....
Than format it with fat32....
Than use cwm to partition ur sdcard....
Sent from my GT-S5360 using xda app-developers app
Did you set your 2nd partition as primary?
Sent from my GT-S5360 using xda premium
yeah! I did set my 2nd partition as Primary and FAT32....since, Link2SD was unable to mount the EXTs...
Please anyone tell me how to format ext partition with phone.
Sent from my GT-S5360 using Tapatalk 2
Any one plzzzz rlpy
Sent from my GT-S5360 using Tapatalk 2
go to setting > sd card and phone storage then unmount sd card and formate your sd card..
backup your sd card because it format whole sd card data
press thanks if i helped you
Sent from my GT-S5360 using xda premium
Sachin Patel said:
go to setting > sd card and phone storage then unmount sd card and formate your sd card..
backup your sd card because it format whole sd card data
press thanks if i helped you
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
I only want to format ext partition.
Sent from my GT-S5360 using Tapatalk 2
not possible with mobile..
Sent from my GT-S5360 using xda premium
Sachin Patel said:
not possible with mobile..
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
How can i do it with pc.
Sent from my GT-S5360 using Tapatalk 2
you can use MiniTool Partition Wizard
Asmy Yuh said:
you can use MiniTool Partition Wizard
Click to expand...
Click to collapse
I know but please tell me process.
Sent from my GT-S5360 using Tapatalk 2
Have u tried cwm..
** rooting is new for me,
nd i am a noob to root....**
how can we format an already existing ext partition with CWM??
SENT FROM NeMES|S PHO€NiX with MT 2-5 #206©®
formate ext partition with mini tool..
1. select the ext partition you want to formate
2.right click on ext partition
3.now you can see formate option
4.now select formate
press thanks if i help you
sent from my GT-S5360 using
XDA PREMIUM
sanchit0403 said:
I know but please tell me process.
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
1. First you have to download Mini Tool Partition Wizard Manager and install it on PC.
2. Insert your SD card to a card reader and open it on your computer.(not via USB cable)
3. Back up all your files to the computer because partitioning will wipe your data.
4. Open Mini Tool in your computer. Locate your SD card (be careful in choosing and make sure not to choose the drive of your computer)
5. Right click and choose Delete.
6. Create FAT32. Set as primary
7. Create an ext2/ext3/ext4 partition (I suggest ext2 cause it works on all roms and kernels).
8. Select “Create As: PRIMARY” (make sure that it is both set to primary because it will not work if it is not set to primary)
9. Click the “Apply” button on the top left corner and wait for it to finish the process. Done.
Asmy Yuh said:
1. First you have to download Mini Tool Partition Wizard Manager and install it on PC.
2. Insert your SD card to a card reader and open it on your computer.(not via USB cable)
3. Back up all your files to the computer because partitioning will wipe your data.
4. Open Mini Tool in your computer. Locate your SD card (be careful in choosing and make sure not to choose the drive of your computer)
5. Right click and choose Delete.
6. Create FAT32. Set as primary
7. Create an ext2/ext3/ext4 partition (I suggest ext2 cause it works on all roms and kernels).
8. Select “Create As: PRIMARY” (make sure that it is both set to primary because it will not work if it is not set to primary)
9. Click the “Apply” button on the top left corner and wait for it to finish the process. Done.
Click to expand...
Click to collapse
its so long procedure man there is formate option which is only formate your ext partition
sent from my GT-S5360 using
XDA PREMIUM