Related
Guys,
I have a Touch HD and I have tried as I might to get it working with Wifi and Data connection perfectly; let me explain.
What I want to happen is this:
Wifi to connect to my home router (which it does) and allow the internet and access to my network (think I have that one sorted)
Data connection to start on all Internet based applications, when Wifi is not turned on
When Wifi is turned on, this connection to be used for all internet based applications
My issue is that I can only ever get some of these working at a time. For instance, my email is set to check every 5 minutes. If my wifi is on, my data connection still fires up and attempts to grab my mail, as opposed to using my already connected wifi connection.
I think I have sorted the Wifi connection issue when connecting to my network...I used to have to switch between "Internet" and "Work" for it to identify my LAN....however Resco Explorer seems to fix this issue.
Can anyone provide a comprehensive guide as to how to achieve the above....just annoys me how shockingly implemented WinMo networking is!
Thanks again - all help appreciated.
Sorry, I have no solution for what you ask.
Wiggz said:
I think I have sorted the Wifi connection issue when connecting to my network...I used to have to switch between "Internet" and "Work" for it to identify my LAN....however Resco Explorer seems to fix this issue.
Click to expand...
Click to collapse
Lately I do have problems using my WiFi though. I have it all setup with my home router since months and had no problems. Then at some point (don't know when exactly), all programs (like the weather, opera, email) started to not be able to connect anywhere, while at the same time my HD reports it is connected to my home WiFi network.
Everything works fine (internetwise) when connected through Activesync.
I saw this "Internet" and "My Work" options too, and I also have Resco Explorer. Could you please explain what it is you have sorted out in case it helps people ?
Edit: here's the problem thread
Hey all,
Done some searching but cant find a clear and striaght forward answer.
Bascially, on my old HTC Dream (Android) wifi would always be searching for a wifi to connect to (and if it found a network, it would tell me). if it was a network it had acess to, then it would automatically connect.
Otherwise, it would just use my contract internet.
So I was wondering, on the HD2, you always have to manually turn wifi on. Then say I leave the house, manually turn it off for it to connect to the contract internet.
Pretty small thing - but it gets annoying after a while.
Is there a way (reg edit or app) to make wifi do the same as the android did?
Thanks!
Bump.
I am interested in this too. I am trying to assemble a Mortscript to do it.
would be so helpfull.
I have my home network, Uni network and girlfriends that I can connect to. Now having to manually connect each time, and then disconnect from wifi when I leave is pretty annoying
Oo Alias oO said:
Hey all,
Done some searching but cant find a clear and striaght forward answer.
Bascially, on my old HTC Dream (Android) wifi would always be searching for a wifi to connect to (and if it found a network, it would tell me). if it was a network it had acess to, then it would automatically connect.
Otherwise, it would just use my contract internet.
So I was wondering, on the HD2, you always have to manually turn wifi on. Then say I leave the house, manually turn it off for it to connect to the contract internet.
Pretty small thing - but it gets annoying after a while.
Is there a way (reg edit or app) to make wifi do the same as the android did?
Thanks!
Click to expand...
Click to collapse
This must be a rom issue. What ROM are you using?
My HD2 Wifi will connect automatically to networks I have connected it to before, it will notifiy me of available wifi, it will use cell data when wifi is not connected. Works to me the same as how you described your HTC Dream.
Just the stock one that comes with the phone.
to make my point slightly clearer...
I am at home with my Wifi turned on and connected.
I leave my house and go outside of the wifi range.
My phone still has the wifi icon at the top, but it wont be connected.
Therefore I have to turn wifi off to let it connect to my contract internet.
Maybe Wefi will solve that problem?
On Symbian worked very well.
Mike
sdhfjmhsdhfghj
I shall look into this, cant belive others dont get annoyed at it tbh
I'd like a solution to this too. I have found it annoying since settings my HD2. I haven't had any success with the solutions suggested in the forum to date.
actually guys.. there is another thing.. how about a cab that would force HD2 to open WIFI automtically to update weather/facebook..etc... whenever the any apps needs updating, then shutting the WIFI automatically off instead of trying to connect to 3g. you guys think its possible?
Mine always lets me know when I can connect to wifi.
Guys theirs does too. You dont get what they want.
When wifi is turned on it will search and connect only to wifi. It will not connect to wireless network of provider. So they want a program that would turn wifi off (which would let HD2 to connect to EDGE and 3G) if there was no place to connect to. And it would turn wifi connection back on (dissable 3G and EDGE) when there would be a wifi network to connect into. You get it now? It would neeed quite sophisticated program to switch betwen those two modes.
I dont use Providers network (3G, EDGE) but would like program that would check for avaible WIFI networks that I have access to and Connect to them to get updates (it would check for example every 10min) and connect to it only to get updates and SYNCH. then disconect and wait cca 4hours to start looking for wifis in 10min intervals. Would be nice =)
KowboyBebop said:
Guys theirs does too. You dont get what they want.
When wifi is turned on it will search and connect only to wifi. It will not connect to wireless network of provider.
Click to expand...
Click to collapse
Then it must depend on the ROM version, but for me it works exactly how he wants, and always has. I never turn Wifi off. If I'm at home within my wifi range and load a webpage, it loads it through wifi. If I walk away, wifi connection gets lost, and I press a link, it will load it with the data connection straight away. If I walk back home or to another place where a known wifi is present, wifi reconnects by itself.
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
Seems to be a one time event with the data problem but the main thing keeps annoing me
Have you tried pulling the battery waiting 60 seconds placing the battery back in the phone and then rebooting?
Eh no cause on the galaxy tab the battery cant be removed
NightFire123 said:
hi
Im running the stock JK6 and rooted.
when Im running e.g. the liveview app my phone keeps some kind of freezing after a few minutes, first I tought it is app related but now I revieved my OBD2 scanner for my car and its just the same with the app "torque".
is this a hardware related problem or something wrong with this ROM.
did a HR several times and reflashed the ROM.
Edit: I noticed when bluetooth recieve or send data I cant get any other wireless date like on wifi or on radio.
please help
thanks
Click to expand...
Click to collapse
I don't Know, but if you have a Bluetooth PAN connection to the internet, then it should be not possible to have another connection to the internet. IP routing to the gateway would be confused if you could.
There are tools that "group" several separate internet connections into one virtual one.
no Im not using a bt PAN to connect the inet, only normal bluetooth data usage
Push
Just only me who is facing this annoing problem?
Same problem with OBD2 :s disable GPS reduc freeze loop. But not fully (30 minutes). Next time i will turn off Data conection.
Every time i've freeze now i see torque try reconnect to OBD2, seem like BT of SGT turned off or time out
I am having the same problem. As long as I have bluetooth turned on, it will hang the Tab within 30 min. All bluetooth connections are definitely gone. Turning off the bluetooth won't help. The only way is to reboot and never turn bluetooth on.
BTW, I have tried connecting LiveView or a normal bluetooth headset. Both cause the same problem.
I am on JK2.
It seems it is bluetooth driver conflicting with any other data connections.
Did a further testing. Disabled Wifi, but doing data communication via 3G network while turning bluetooth on. The tab hangs in a few minutes. Found a process called 'btld' sucking up all the CPU circle.
Any ideas what 'btld' is?
Thought this should not be a hardware problem because bluetooth works fine when all data connections are off and Wifi/3G data works fine when bluetooth is off. It must be some sort of default setting isn't correct. If this is the case, then root would be a must before manually tuning any parameters.
Found root cause. It is actually the SonyEricsson LiveView software causing troubles. After removing, everything goes well.
Checked on SonyEricsson's web site, it seems Froyo is yet to be supported.
try to use WO Webcam B-Lite out of market, you can open a bt connection by pressing activate and then while running, close via taskmanager, voila the freeze begun
I've got galaxy Tab and galaxy S, and torque badly freezes the devices almost every time I exit the application. It cannot be an hardware fault since I use lot of bluetooth devices and always 3g connected, never had issues. Just with torque, and I don't have any "sony liveview" thing.
Reading on the comments of Torque it seems that also other devices have the same freeze issue (especially a phone called "Evo 4G"). Many months ago I sent a mail to the developer explaining the bug but he bumped me away replying that the app is tested and working on GalaxyTab (and obviously it's not true, or he did some mistake in testing). Now lots of people with this Evo 4G are complaining and the developer is trying to fix. let's hope..
I know this is not exactly Android head unit topic but it's closely related to using the device.
So here's what's going on. When I manually turn on wifi tethering (Hotspot) on my phone (NOA H10, 7.1.1 nougat), device (head unit) connects to it as it should, and everything works.
On the otherhand when I use tasker, or any other app to trigger wifi tethering on Bluetooth connection, the hotspot turns on but device can't connect to it. I get obtaining IP address issue, and when I set to static IP it connects for a few seconds and then drops the connection. It's really frustrating because I know it can work.
I know l can always turn the hotspot on manually when I get into the car but I want it to be automatically turned on when Bluetooth connects to my unit.
Anyone else has/had this kind of issues? Any ideas/solutions?
AFAIK most of these units don't support bluetooth tethering at all. Not really sure if any do at all.
Sent from my iPhone using Tapatalk
I'm not talking about bluetooth tethering.
Ok I get it, trigger wifi on bluetooth connection with the triggering attempted on the phone side.
I have 0 experience with android phones but I know my iphone will never allow a connection (to anything) unless you open the hotspot setting manually. When I do that my units all automatically connect.
Sent from my iPhone using Tapatalk
I use Macrodroid app to activate the hotspot when muy phone is conected by bluetooth, and all runs ok
I tried macrodroid. Same thing as the other apps. It turns on hotspot but can't connect to it.
So here's the SITREP, when I use connected to a bluetooth device trigger without specifying a device, the hotspot works. Only if variable, device name and/or mac address is specified the device will not connect to hotspot.
Install and use this plugin
Doesn't work. But I managed to get it work with secure settings and touch task plugins.
Tux2609 said:
Doesn't work. But I managed to get it work with secure settings and touch task plugins.
Click to expand...
Click to collapse
Can you elaborate please? I'm also having this EXACT same issue.
Thanks.
jks8496956 said:
Can you elaborate please? I'm also having this EXACT same issue.
Thanks.
Click to expand...
Click to collapse
I'm using secure settings and touch task Tasker plugins to simulate manual hotspot toggle. When my phone connects to my headunit it triggers screen on then screen unlock to unlock the phone, then quick settings (drop down) menu and finally touch on hotspot tethering icon. Same command is executed on Bluetooth disconnected status.
So today I installed my new Eonon GA2185. I was hoping it would be able to tether my phone's internet on bluetooth automatically, without ever having to manually activate bluetooth or hotspot or something like that. It's a mythical function. Some say it's impossible, you'll always have to click at least one button to connect your head unit to the interwebs, some say it's a built in function.
When turning on the radio for the first time and connecting it to my phone's bluetooth I was so desperately hoping it would also borrow its internet, and apparantly it did! There was no wifi network, just bluetooth and I managed to visit some webpages and perform a speedtest (< 1Mb/s, but hey it was something!).
Unfortunately, after customising the unit with all my preferences, apps, accounts and appearances, I lost the bluetooth tethering. It simply stopped working. It only works on wifi now. Anyone know how to get it back or enable it in the first place? I've already reset it to factory settings but that didn't do it.
This unit works on bluetooth 4.0. Does the difference between 4 and 5 matter a lot in this aspect?
iLikePizzas said:
So today I installed my new Eonon GA2185. I was hoping it would be able to tether my phone's internet on bluetooth automatically, without ever having to manually activate bluetooth or hotspot or something like that. It's a mythical function. Some say it's impossible, you'll always have to click at least one button to connect your head unit to the interwebs, some say it's a built in function.
When turning on the radio for the first time and connecting it to my phone's bluetooth I was so desperately hoping it would also borrow its internet, and apparantly it did! There was no wifi network, just bluetooth and I managed to visit some webpages and perform a speedtest (< 1Mb/s, but hey it was something!).
Unfortunately, after customising the unit with all my preferences, apps, accounts and appearances, I lost the bluetooth tethering. It simply stopped working. It only works on wifi now. Anyone know how to get it back or enable it in the first place? I've already reset it to factory settings but that didn't do it.
This unit works on bluetooth 4.0. Does the difference between 4 and 5 matter a lot in this aspect?
Click to expand...
Click to collapse
Ive got the same problem, I have the same unit as you.
I had it working when I first installed the unit, it just came on automatically when I entered the car. But since a firmware upgrade I cant get it to connect anymore! It was great for Spotify and maps.
If you manage to find a way let me know!
I believe I factory reseted everything again after updating. Then I tried connecting bluetooth first and then WiFi. For some reason that worked (after I rebooted the device, it would turn on wifi but my phone's wasn't broadcasting, and then it automatically switched to bluetooth).
I also noticed that whenever the unit was powered on, an extra setting in my iPhone appeared called 'Ethernet', which apparanly means that it's tethering through bluetooth. Not sure if Android has a similar way of showing.