[Q] [JB][CM10]USB Debugging MTP Driver issue - Defy Q&A, Help & Troubleshooting

Hi,
I was checking out the new nightly for cm10 and needed to go back to stock for certain reason but rsdlite is not able to detect the device due to mtp usb driver code 10 failed .....is it a problem with the build or my desktop?

Related

[Q] MTP Mode Problem

After trying to Sideload the 4.4 Update onto my Wifi Nexus 7 (2012) I'm unable to connect to my Computer in MTP Mode & can only connect in PTP Mode which is far more limited than MTP Mode. I did a Factory Reset & updated to 4.4 OTA, but I'm now still unable to connect in MTP Mode, when I use MTP Mode I get a Google Nexus 7 ADB Interface in Device Manager with Manufacturer ID of ClockworkMod has anyone got any clues how to get MTP Mode working?
P.S. I'm unrooted and have no idea how the ClockworkMod ADB Driver got installed and haven't got a clue how to permanently remove it.
Roland
Rolandh said:
After trying to Sideload the 4.4 Update onto my Wifi Nexus 7 (2012) I'm unable to connect to my Computer in MTP Mode & can only connect in PTP Mode which is far more limited than MTP Mode. I did a Factory Reset & updated to 4.4 OTA, but I'm now still unable to connect in MTP Mode, when I use MTP Mode I get a Google Nexus 7 ADB Interface in Device Manager with Manufacturer ID of ClockworkMod has anyone got any clues how to get MTP Mode working?
P.S. I'm unrooted and have no idea how the ClockworkMod ADB Driver got installed and haven't got a clue how to permanently remove it.
Click to expand...
Click to collapse
Look in your PC's Control Panel - do you see Portable Devices (it's most likely missing or not showing up)
Folks over at Nexus 5 (I owned both devices) are running into similar problems - long story short, it's corrupted and/or missing usb devices drivers. Simplistic solution, use the computer (assuming you are running Windows 7 or Vista and not Linux) SYSTEM RESTORE feature & roll back to last few days, it should be a successful effort & then reboot. Reconnect your device, let it sit & recognize the device, install drivers, etc. - do this with USB debugging OFF first, and when it is done - enable USB debugging, let it finish.
Now, reboot PC again to be sure, and connect. usb cable again - give it 3 to 5 seconds, your Auto Play should be popping up with prompt to open folders/files, etc.
Check your CP again, you should now see Portable Devices part of the hardware, and Google Nexus 4 (yes, that's what is on mine)
Let me know if this solution works for you - the alternative is to uninstall all usb drivers, reboot, install, etc. etc. Please post your results if you choose to follow this dummy's approach, thanks.

[Q] cant use as mass usb device

flashed CM10.2 stable. enabled debugging. auto install fails and windows update cannot find.
can someone help me?

MTP USB device drivers installation Fail

Hello,
I'm using a Bell Canada Samsung Galaxy S4 model SGH-i337M.
I tried to install the following driver I download from this one of the XDA Forums: SAMSUNG_USB_Driver_for_Mobile_Phones_1590
During installation everything went fine but the part related to MTP USB device Failed.
This problem has been encountered for all the other drivers version I tried to install.
Every time I have been trying to install a driver, I always uninstalled the previous driver and rebooted before to install the new driver.
I even ran the USB driver cleaner application DriveCleanup version 0.8.1.1 befor and rebooted in order to make sure that no other USB drivers would remain on my Windows 7 x64 based computer.
No matter what I tried, I've never been able to install the MTP USB device driver installation successfully.
I would appreciate it very very much if someone could help me solve this annoying problem.
Thanks in advance.
Chris

[Q] Bricked N7 issue

Hi all,
After a long time, I decided to play with my Nexus 7 again. About a year ago, I bricked itsomehow (don't remember how exactly).
As a result, only the bootloader is installed. So no (custom) recovery and/or ROM. Today, I tried to flash the stock rom with the Nexus Root Toolkit but it didn't work.
My computer (Win 8.1) was not able to recognize my Nexus 7 in fastboot mode.
The device manager in windows labels my nexus as an unknown device of which the device descriptor request has failed.
I already tried to install many different driver packages (while removing the device from the device manager) but it did not work for me. Everytime, the tablet is seen as an unknown device.
I also tried to update the driver manually by right clicking on the unknown device in device manager and clicking update driver software and then manually selecting this http://support.asus.com/Download.aspx?SLanguage=en&m=Nexus+7&p=28&s=2 driver but it does not recognize any driver.
So in short, my pc, which runs windows 8.1 is unable to see my Nexus 7 (which is bricked and has no rom nor custom recovery installed) when it is in fastboot mode. Therefore I am unable to install another rom.
Any thoughts on this problem? Thanks in advance.
I sent you a PM regarding this issue and a potential fix. If it works, i'll post the detailed info here later

Nexus 7 2012 not used for 2+ years, usb driver and MTP problem help!

[WRONG SECTION, sorry please move to Help & Troubleshooting please.]
Hey guys, my nexus 7 is rooted operating AOSP/AOKP on 4.2.2 just to give some brief information (it's not fresh in my mind and I plan to clean install a new rom and kernal).
So first I'm not getting my nexus to display in my computer (win 7 x64) as MTP with usb debugging enabled nor disabled. PTP camera mod works and displays. I've already googled around so I know a few basic solutions to this issue none of which have worked thus far.
Following Nexus Root Toolkit driver instructions.
After wiping the drivers a windows restart and disabling debug mode, connecting via usb only installs the "Android ADB Interface" driver only (step 2 link above). After switching from MTP to PTP Nexus 7 driver is installed only (step 3). I then re-enable MTP where no new driver is installed untill usb debugging is turned back on and Android Composite ADB Interface driver is installed (step 4 + 5). This is where I'm stuck... At one point while playing about I managed to get MTP in the taskbar driver installer only to fail "No driver found" or something along those lines.
Please can someone assist me I need this tablet wiped and operation ASAP.
Thanks anymore information required just ask.

Categories

Resources