[Q] USB Connection Problem - Galaxy Tab 10.1 General

Hi all, I have been trying to connect my tab to my computer for the past two days. My tab is galaxy tab 10.1 P7500 unrooted with official ICS. I want to root my tab and thats when i connected it to my pc but i had very bad time doing it. I tried reinstalling kies and all the samsung drivers but still the same it wont connect and i even tried factory reset to my tab but still it shows device not recognised. And now i have no clue what the heck should i do to make this thing connected. im really fed up trying, because i done these steps several times..lol i tried reinstalling my drivers more than 8 times already. So if there is someone out here who can tell me how to make my tab get connected with my pc that would be great and i will be so thankful to who ever does that. please help me guys... a million thanks in advance.:good:

settings > storage and touching the 3 little squares in the top right of the screen.
eantonykurien said:
Hi all, I have been trying to connect my tab to my computer for the past two days. My tab is galaxy tab 10.1 P7500 unrooted with official ICS. I want to root my tab and thats when i connected it to my pc but i had very bad time doing it. I tried reinstalling kies and all the samsung drivers but still the same it wont connect and i even tried factory reset to my tab but still it shows device not recognised. And now i have no clue what the heck should i do to make this thing connected. im really fed up trying, because i done these steps several times..lol i tried reinstalling my drivers more than 8 times already. So if there is someone out here who can tell me how to make my tab get connected with my pc that would be great and i will be so thankful to who ever does that. please help me guys... a million thanks in advance.:good:
Click to expand...
Click to collapse
settings > storage and touching the 3 little squares in the top right of the screen. check that MTP is turned on

Related

"USB not recognised", Odin download mode problem

Hey. Im brand new to this forum and to Android aswell since i came from Iphone. Yea im a noob and sorry if you notice bad english
So i received my SGS2 some days ago and after researching about root/custom roms and stuff, I decided to start with rootin my SGS2. i download Odin3 1.85 and superoneclick, i also liked litening rom v1.1 and downloaded that too.
So i turn on "USB debugging" and turn off the phone to enter "download mode" and when i try to connect to Odin, nothing shows up. And Windows bar tells me that usb is not recognised. But... flash drive/transferring files and connecting to Kies works just fine. Please help me, ive been sitting over 24 hours with this issue and ive restarted/uninstalled installed pretty much everything over and over again (kies/drivers/device) not windows though. Why wont Windows/odin recognise it in download mode???
And if possible, is there a way around to install litening rom??
Thats weird man....very very unlikely to happen...
Just tell us step by step with screen shots if possible then it becomes very easy for us to find where u r doing it wrong...ok ?
Turn off USB debugging .
reboot phone and PC .
jje
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Adnanish said:
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Click to expand...
Click to collapse
This is driver issue.Try to find on kies an option to install the drivers again(i am not in front of my pc).Of course phone on and untick usb debugging
Sent from my GT-I9100 using Tapatalk
This is a driver problem. The Gadget Driver fails to get installed properly.
Make sure Windows Update are set to automatically find drivers for your devices.
I myself faced this problem. To rectify it I'd to try the same thing on a different machine and it worked flawlessly there.
The problem you're facing is that the Service Mode drivers are not getting installed, hence Odin is unable to recognize it.
Other possible fixes include, trying on different USB Ports, downloading Samsung PC Studio.
Thx for the replies everyone. Yea i figured its a driver issue, ill try the suggested actions incl samsung pc studio installing, and if its still not working i guess my last resort is using another pc or reinstalling windows on my own pc
In kies, i think in the tools menu, there is a install drivers option. This will fix the problem im sure. Not sure about pc studio having the same.
Sent from my GT-I9100 using XDA Premium App
fyi, i reinstalled windows and updated everything and the driver connection issue is solved now. I should have done this from the beginning instead of freaking out for several midnight hours lol thx for the help everyone, hopefully the rooting and flashing process should happen painless now
if anyone has this problem too,
i had the same problem and for me closing kies helped.
mfg Solidus

Kies

Anyone familiar with an error trying to connect to Kies that says "cannot start the service on the device, please disconnect then reconnect"?
The tab doesnt go into "Kies mode".
Possibly something to do with the kernal?
uncheck USB debugging!
rogconnect said:
uncheck USB debugging!
Click to expand...
Click to collapse
This is probably it right here ^ but also, K Rich, let us know what ROM and Kernel you're using. Thanks!
well, its not USB debugging. possibly starburst rom or pershoot kernal as the issue?
I had same problem.
The quick solution is factory reset.
Or you have to find a file with strange(illegal) name.
I suppose kies scan the files on tab during connection and because the illegal name found the connection process fail.
Happens everytime
It happens to me everytime. Easy way to check if Kies is broken is to try and enable it in settings "Wireless and networking". If you select Kies via Wifi and a dialog does not pop up then the Kies service is broken. Only way to fix it then for me is a factory reset which is a pain since I have to reinstall everything then.
Does anybody know of an easier fix. I am on a p7500 32Gb 3G and Wi-fi. Also as a side note: this kernel also does not seem to work with Plex streaming. No fix unless I root I think. This is the south african vodacom/fone galaxy 10.1
Regards
That same error message just started happening to me too. My SGS i9000m used to connect to Kies fine, but I just accepted a new Kies update and let it install, and now in Kies ver 2.0.2.11071_128 it gives me that error message.
Same thing just happened to my girlfriend, who has the identical phone to me. Once she accepted the recent Kies update, it doesn't see her phone.
But, Windows 7 (64-bit, for both of us) does see the phone.
And, the Kies Air app does work for me!
My phone is "lightly rooted" with Super One Click root. (As in, I haven't used Odin to put new ROM's on it, and I haven't messed with the phone much.)
Is there a way for me to get Android 2.3 onto it, through Kies or Kies Air?
Thanks guys. Sorry, I'm a noob.
hope it can help
I had the same problem with galaxy 2 and tab 8.9 (gt-p7300)
With galaxy 2 solved by shut down the phone (press power for 10 sec) with kies on and usb connected to comp.
With tab 8.9 the only way that worked for me is a factory reset, the same method of galaxy 2 was not working.
I hope it can help
reboot+usb connected -> fixed Kies
pippone121263 said:
I had the same problem with galaxy 2 and tab 8.9 (gt-p7300)
With galaxy 2 solved by shut down the phone (press power for 10 sec) with kies on and usb connected to comp.
With tab 8.9 the only way that worked for me is a factory reset, the same method of galaxy 2 was not working.
I hope it can help
Click to expand...
Click to collapse
Thanks dude, the reboot of my galaxy s2 with usb connected made Kies detect my phone again.
I owe you a beer, maybe two.
Cheers,
Stefan.
I noticed that disabling pattern protection, allows Kies to recognize the tablet.
EDIT: not always, sorry
Even though this is an old thread, I would like to confirm that rebooting SGS 2 with USB connected, caused Kies to recognize my phone. Another method that works with limited success is changing the USB port on the PC to which the phone is connected.
Thanks.

[Q] GS4 i9505 usb-pc issue after upgrade to JB 4.3

Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
So... can sombody help me or this issue is too much advanced for this forum?
Again please help me.
Dude-K said:
Again please help me.
Click to expand...
Click to collapse
Can you please try to install this driver to your Pc http://uploaded.net/file/xdloq4jw , connect the cables on both side's Pc/Phone , on the screen to your phone there should be a notification(Connected as a media Device,Swipe it down and click that option, There should be MTP and Camera) Try to tick the camera first and let the driver install it and then tick MTP and let it install the driver for that as well , and Make sure to activate USB debugging. let me know. Have anice day.
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Dude-K said:
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Click to expand...
Click to collapse
Hi there mate , Try plugging it in to another usb port that comes off a motherboard. Don't use the front ports or usb hub. or either download kies 3 from here http://downloadcenter.samsung.com/content/SW/201312/20131204181418883/Kies3Setup.exeto see if its gonna work or not.have a nice day.
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
4.3 pc Drivers are different from 4.2.2. Install kies 3.
Enviado desde mi GT-P7510 usando Tapatalk 2
Dude-K said:
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
I see the problems are in Windows 7. The USB Conector seems ok. Untick "usb debugging" in ur phone and take a look this page. If dont appears nothing in the device manager, tell me it and i will give ya other solution
EDIT: Other option is:
- Uninstall completely Kies and Kies 3
- Reboot ur pc
- Download the latest version of Kies 3 (drivers are included, only tc what u select in the installation -> dont untick them)
- Conect ur phone to the pc with the USB conector and wait coz the drivers have to be installed. Till Windows dont finish of install them u dont need touch nothing. Good luck
I'm suprised that three peoples trying to help me, thats charming, thank you.
But...
Repulsa I've done what u wrote, I tried plugging s4 to another usb port, one port usb 2.0 and another usb 3.0, always was the same situation, the charging start coming but nothing more, there is no notification on phone screeon or on the pc. Also I tried do this in second pc, in 3 usb ports, but always was the same. After that I tried that what Repulsa and jaswinsky says, i re-install kies. First I uninstall in both pc kies, and i install the kies 3, I reboot my pc and I reboot my s4. Nothing new happens, only charging. Here i want to turn your attention that, I checked in both pc's my younger brothers Galaxy s2, and it havent any problems with connecting! If I plugging Galaxy s2 in this usb ports in both pc, windows 7 havent any problem to recognize phone! Kies and "My Computer" shows the device memory and its working. When I after that disconect s2 and plug in my s4 the same situation happens. Only charging icon, and nothing appears about connection.
After that i tried that what Joku1981 wrote, I untisck "usb debugging" in developer options and i checked the device manager, but there doesnt appears anything. There is not "other device" warning or anything like that. Charging icon appears but pc dont recognizing s4. I would also like to point out that, yesterday I've done with younger brother the format on one of this pc's with hope that will helps but, we format pc, reinstall windows7, reinstall all drivers, and the situation is still the same.
Please help me!
PS. I'm starting think about that the official OTA update do 4.4 will solve the issue..

hp omen laptop wont connect with note 4

hi all i recently got a Hp Omen laptop and my samsung galaxy note 4 n910g wont connect it connect but keeps doing that sound when you disconnect the device, things ive tried is wyped everything and installing a fresh rom nothing, second unrooting going back to stock nothing, third awhile ago i was on cm12 and you know the connect usb thing its got charge online and the one to connect to use as a storage i clicked on charge and nothing happened. on my old laptop works fine so what i did was put it on charge and then back to storage to see if it fixes it nothing, i do not know what to do it charges when the phone is off, it boots into download mode and i can do odin stuff, but it wont connect i have also installed samsung kies to see if it would help nothing and i also installed the samsung drives still nothing. also it connect to my home computer just fine its also a hp @gekkehenkie11 @firebird11 any ideas?
Did you try other mobile device on your usb or a usb flashdisk perhaps. This maybe a malware
Jaistah said:
Did you try other mobile device on your usb or a usb flashdisk perhaps. This maybe a malware
Click to expand...
Click to collapse
no i have not tried but i tried different usb it works when the phone is off, and connects to oden i might wipe my laptop to see if that works
Did you install the drivers before hand? If not look for them install them then go to device manager in the computer find the phone, there should be an exclamation mark right click and press update drivers or right click and uninstall, once the device is uninstalled unplug the phone wait a sec or two then plug it back in
Sent from my iPad using Tapatalk
just reformatted again and guess what now none of them work
dominicstg2 said:
just reformatted again and guess what now none of them work
Click to expand...
Click to collapse
did you found any solution , im in the same boat ?
WizzyWiz said:
did you found any solution , im in the same boat ?
Click to expand...
Click to collapse
i sold it a long time ago now i have a custom pc

Usb connection options doesn't pop up when connected to PC

I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
117micc said:
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
Click to expand...
Click to collapse
Have you tried a different cord? If its not the cord the inspect the port on your phone to make sure no lint or crud is physically blocking some pins. Do you have developer options enabled? Maybe something got changed in there. Its never happened to me so these are just guesses. Maybe somebody smarter can help.
117micc said:
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
Click to expand...
Click to collapse
Mine gives a notification that the phone is charging when I connect to computer but if I click the notification it gives me the option to transfer files instead. You do have USB Debugging enabled on the Developers Menu, correct?
Hello guys
I have the same problem on my phone i tried everything i found on google and other forums, and the last option that i couldn't do is to send my phone to replace the usb port, but i have no warranty as i bought it already used. It's a shame that no one can find a solution here especially that the other forums at least tried to fix for some people but not here on xda which is the first in the world.
driss.sadok said:
Hello guys
I have the same problem on my phone i tried everything i found on google and other forums, and the last option that i couldn't do is to send my phone to replace the usb port, but i have no warranty as i bought it already used. It's a shame that no one can find a solution here especially that the other forums at least tried to fix for some people but not here on xda which is the first in the world.
Click to expand...
Click to collapse
I've even changed my USB port and daughterboard twice. I am stumped. I got 3 laptops 2 running 10 and one running Ubuntu and mAid along with a tower running xp. I fix unfixable phones and resell them. I've tried EVERYTHING. I know this is an old thread but Any help would be appreciated.

Categories

Resources