Related
I upgraded my device (PW10B1, Wallaby 5.15) from PPC2002 to WM2003final downloaded from http://www.romkitchen.de, I used SD card type-1 and the writing completed successfully but after cold reset, Wallaby boot screen showed up again and stopped with "GSM OK" message and won't go any further. Please help, Thanks.
When you get GSM OK, you are in the bootloader.
Maybe a malware of your powerbutton....
if you just do a softreset, what happens without touching the powerbutton?
Stefan
actually I got the device in damaged condition from a friend, before upgraded it won't boot to windows, it was just keep displaying Wallaby boot screen with "GSM ERROR" message when turned on. After upgrade process and soft reset (with and without touching power button, the results are the same) Wallaby boot screen is still displayed but the message is "GSM OK". I'm thinking the same thing, the power button may be damaged somehow, I'll try to check that, I'll let you know what comes up. But is there any other possibility for the problem? Thank you very much Stefan.
Joyo
No, normaly not, btw. i do not know any possibility.
Stefan
power button
I tried to work on the power button, opened the device and take a good look at the switch, physically it looked just fine. Well, guess I just have to let that one go :? Thanks for the help Stefan.
Joyo
Hi thejoyo, have successful you recovered your wallaby? I have exact problem:
1. The device automatically enters bootloader 5.22, says GSM OK and then stop. Buttons dont work, except for two reset button.
2. Charge led (usually amber when charging) turn RED
3. I managed to flash the device by SD card method but did not success. When i put SD card into device and reset, it automatically flashed itself!!! Without my permission, didn't press OK button!!! It's very strange. Then it said that flash success, cold reboot. I press reset button and it enter bootloader again, like i have never flashed it.
I have tried many SD card, still no luck.
Should I try something else? Please suggest me what to do next!
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
hi guys.......
my phone issue is still not solved.
i have a U8800, came with 2.2.1 b136 rom. all things used to work fine and one fine day while i was out and the battery drained off, Returning back home i plugged my phone to the power and kept for charging as usual. in the morning when i power up the phone it started but got hanged up on the android text animation screen and then a loop of same. from that day onwards my phone is not working.
it starts up showing big huawei screen and proceeds to the android text animation there it get stuck for a few seconds and then again back to android text animation continuously the same.
I can get into the pink screen bu pressing Vol up + Vol Down + power.
I can also get to the blue screen Vol Up + Power.
i cannot change any thing in any of the drives or partitions in the pink screen. the image folder (in the pink screen), and other partitions also all the 4 partitions are freezed. even if i delete or replace files, the previous files comes back the very next movement. as if the memory is freezed. i even tried to format the 253 MB partition (image folder partition) but format gives error cannot format this drive , checked the attributes is unchangeable read only partition.
i tried updating official rom 2.2.1, 2.2.2, 2.3.5, but update failed, Some times even it reaches the update process to STEP 2/2 and there its like hanged the progress doesn't moves further even tried keeping hours, also tried update without battery but the same.
OK logically i assume i cannot update if the partition is read only. but why is it.
it used to be a working phone worked well and once sudden day its like.......
Is my phone bricked and what i can do to get it on. please help.
i cannot go asking for warranty as it is already out.
i am been asking for help like more then 45 days.
Warranty?
Sent from my u8800 using xda premium
I found the solution is working:
sorry for my English (I use the translator)
I noticed that when inserting the USB cable the phone came on,
well, same with dload in sd, volume + volume - and insert USB cable
without pressing the power button starts the update.
ettoremarzan said:
I found the solution is working:
sorry for my English (I use the translator)
I noticed that when inserting the USB cable the phone came on,
well, same with dload in sd, volume + volume - and insert USB cable
without pressing the power button starts the update.
Click to expand...
Click to collapse
well ettoremarzan
I do the same as to update without using battery but still it doesnot update !
Any ways i will try again without holding power ...........
my problem is my phone doesnt get updated with any rom even the stock 2.2.1. and just keep it into boot loop at android animated logo screen.
Well Maksimitoisto, i cannot claim on my warranty as it is already out and sencondly befor i can put efforts and take pain of paying for another phone or replacement, i want to try max what we can do on it to solve the issue.
since the phone can boot into the Pink and blue screen and also the normal way (with boot loop) i belive its not more then a software problem, the only thing is i need to get the right to overwrite it.
Any help please write.
Appreciate everyonce solutions & support.
Hello, I have the HTC tmobile mytouch 4g and it is acting up. Stock phone, no roms or rooted.
Three days ago, at night, doing some browsing and then everything froze, would not respond. I removed battery, and then it did a boot loop so i kept trying for a while, taking out battery, and turning on but still boot loop, so then left it alone.
The next morning i held the power and home button and it turned on and it worked normally for the whole day! until about the same time two days ago. Doing a little reading and browsing before bed (same website too, but i didn't download anything and the site works fine on a computer) and it froze. Did the same routine except it didnt work in the morning again. I removed sd and sim card too, left everything out for a long time, but whatever i tried it wouldn't work.
Yesterday i tried all day and then I read online I should do a wipe cache partition from the recovery menu. So i did that, but it was still a boot loop. After a few tries, it stopped turning on. Now the screen doesn't even turn on, but the phone vibrates 7 times when power is pressed, then will not respond at all unless i take battery out, then it will do the 7 vibrations and etc.
All htc said is to try a factory reset, but it wont even go to that menu. I can send it to them, but will probably lose everything on my phone ( like messages, contacts, and app data?) BUT I'm convinced there is another way, since it fixed itself the first time.
Just recently, now it has started blinking the charging light when charging (i charged it about 10 hours ago and it didn't blink)
I don't really know much about how these things work, but I have been reading some stuff about pd15??.jzip and putting it on the sd card (i have access to a micro sdcard reader) Also about a stock image or something. I don't know much so please give a simple-ish answer.
IF THE SOLUTION YOU WILL PROPOSE HAS A LOW SUCCESS RATE OR HAS A POSSIBILITY OF FURTHER DAMAGING THE PHONE, PLEASE LET ME KNOW... If it is too difficult/ too much work/ or dangerous, then I don't mind losing whatever i have on the phone
The PD15IMG.zip is the "stock image." It has to be installed in the bootloader, and you WILL lose all of your data. Usually you can get to the bootloader by holding volume down while booting. It will scan for the file there. Can you get into your bootloader?
sigh
cannot turn on no matter what i hold.
I think the blinking last night meant that it isn't charging the battery anymore. wont even vibrate now unless it is plugged in. its not an issue with the battery is it??
if this stock image is going to delete everything anyway, i might as well send it to htc. i just hoped i might be able to save my messages because i have some really hilarious ones, but oh well.
Can you please tell me exactly what ill lose? so,
bookmarks on the browsers
contacts and messages
all apps (they're on my phone) and app data? (like will i lose my progress in temple run 2, lol)
myTouch 4g HELP said:
cannot turn on no matter what i hold.
I think the blinking last night meant that it isn't charging the battery anymore. wont even vibrate now unless it is plugged in. its not an issue with the battery is it??
if this stock image is going to delete everything anyway, i might as well send it to htc. i just hoped i might be able to save my messages because i have some really hilarious ones, but oh well.
Can you please tell me exactly what ill lose? so,
bookmarks on the browsers
contacts and messages
all apps (they're on my phone) and app data? (like will i lose my progress in temple run 2, lol)
Click to expand...
Click to collapse
I don't have this phone with me ATM.but I seem to remember when you press volume UP: and POWER it if i remember correctly would do the blinking light and vibrating a few times .Anyways to get in recovery You Press Volume DOWN and press POWER at same time should bring you to recovery and if running a custom recovery such as CWM or 4EXT you can try the wipe cache and wipe dalvik cache to see if fix issue or try if using a custom ROM you can try installing the ROM again without wiping data and system first.I Read your post and the replies and correct me if I am wrong it sounds like this might work and sounds like you are able to get to recovery from reading your post I think.I would try and confirm that you are or are not able to try these suggestions before you try the boot-loader suggestion with the PD15IMG.zip or whatever it is called ,these are assuming your rooted with a custom recovery such 4EXT if not and I read wrong again I apologize. Good Luck!
alternatively you could use adb if u installed it
1. connect ur phone via usb cable.
2. run cmd from ur android-sdk folder (or whatever you named it). by running in folder I mean, ur path in cmd should be C:/whatever-is-your-sdk-folder path
3. type this in cmd window "adb reboot bootloader" (without ")
it should load your phone in bootloader from where u can get more options like factory reset or install new rom (u can mount ur sd card in recovery & put new rom to flash on sd card)
Hello all.
I have my old T-Mobile HD2 with the NAND rom you can see in my signature.
Everything was fine for 6 months till today, when my wife (I've given to her) couldn't open it and thought it was run-out from juice.
She plugged it on the PC and wait, while she was dealing with our baby-daughter. When I came back late in evening, I saw the phone with the led still orange, the screen black and the hard buttons flashed. I pressed them, but nothing happen.
I removed the battery, plugged it back again and... since then, the phone stops in the splash animated video (keep continues endless), without the led to flash (orange or whatever) and of course I never getting the Android rom's lockscreen!!!
What's going on???
I've read somewhere to press the red button and plug the battery back. I did and the root menu came up. I pressed the "12" (PowerDown) but the phone started-up again and of course... freezed on the animated splash screen!
Please, help me on this.
I did also hard-reset, by pressing both volume up/down and the red button...
After I pressed the red button (for 30 sec) and then plugged the battery back, I came into the black boot screen and I choose the "AD Recovery".
In the next screen I've seen, that the battery was 95% full!!!!
So, I just pressed the first choice (boot) and... nothing happen, again.
So, what am I suppose to press, in the "Recovery" screen?
Update
-----------
I went again to Recovery screen and I choose to re-install the rom from the SD card (zip file); I did it, the process began and finished, the dialogue wrote to press the "Next" to boot and... still freezed on the animated splash screen!!!!!!
So, what's going on? Is the rom damaged and also I have a problematic SD card and the problem can't be solved?
search how to logcat on google. download necessary files.
make a logcat and post here.
OR
download qtadb (search for it and download) and when in bootanimation, connect phone to qtadb and after it's connected, go to phone info. is system and data partition or any one of them full?
also try wiping cache/dalvik-cache in recovery
Did you checked battery pins if they aren't bent?
Sent from my PIXELDROID HD2 using XDA
I succeed it; made it working!
I did wipeout/format everything except sd and reinstalled the rom and worked! (With NAND option).