hi guys
i know youll never disappoint me
i have zte blade
as it seems i was in gen1. i rooted the device installed all things and then i tried to flash the Cyanoggen 7.1.0 stable mode.. via CMW recovery by holding vol down (-) and power buttons. i enterd CWM rec.
the rom installed successfuly and then i wipe all data cache and dalvik.
i tried to loading up but nothing from this point there is no option to enter recovery again by vol down + power as before. no option to enter bootloader by holding vol up (+) power buttons. ( i tried even with home button too - doesnt work)
i cant find the combination for fastboot mode (bootloader) and the machine doesnt recognize the device anymore (drivers were installed)
so i cant use command line commands because no adb or fastboot is recognized by computer.
How can I stop the re-loop of the green screen with android pic when device is up... all modes like : vol up + power
and vol down + power
and vol up + home + power
and vol down + home + power... nothing works...
i have no any OS right now because i click format when i were into the CWM recovery the device is dead.. it is looping and looping... etc...
who can help me please??? how can I fix my phone and install the CM7 stable rom??? pleaseeeeeee
You're in the wrong forum here, it should be in 'blade general'
Take the battery out to stop it boot looping. When you put the battery back in you should be able to get back into clockworkmod by holding vol- & power on. Then you can restore your working backup or install a gen1 compatible rom (like ginger stir fry).
Then you can follow the Gen1 to Gen2 TPT upgrade guide here: http://forum.xda-developers.com/showthread.php?t=1258855 & install CyanogenMod 7.
You could also copy the gen1 to gen2 tpt upgrade files using mount usb storage in clockworkmod, or by taking the sdcard out of your phone & using a microsd card reader.
Hi XDAers, am new to sharing, and wanted to start with this thread as it might be helpful for many people
Am not responsible if you bricked your phone, so don't blame me!
Lets start with the guide:
What u need:
1- Samsung drivers Here
2- Odin flasher Here
3- Rom files which u will find Here
4- (Optional) To do a full clean install or to root your rom u will need Philz kernel
Installation Steps:
1-Install the previously downloaded samsung drivers on your PC
2-Start your phone in download mode (while the phone is off press and hold PWR button + Vol dwn + Home)
3-Start Odin (above link)
4-Click on the PDA Btn and select the rom file you downloaded (.tar file)
5-Connect your phone (don't use any usb hub or whatever,etc.) so that the phone is connected directly to the PC
6-Wait until you see the upper left box in odin turns yellow
7-Click on start and don't touch anything until its all done
Congratulations! now u have a stock rom installed on your phone
To have a Full clean install (u have to do this first) :
1- Go to Philz kernel and download the one that corresponds to your current firmware build code
(you can know your current rom code by going to settings, about device, the 5 letters after i9100 in Build number are your firmware code)
2- Place the zip you downloaded on your external sd card
3- Start the device in recovery mode (while the phone is off press and hold PWR + HOME + VOL UP)
4- Scroll to install update from external storage using the volume keys and power btn for selection
5- Go to the kernel you downloaded and install it.
6-Turn off ur phone and start again in recovery mode, it will start the newly installed recovery
7- Now go to mounts and storage and format (system,preload,data,cache), Go back to main menu, Select advanced and wipe Dalvik cache
Now ur phone is fully cleaned and ready for Installation !!
For rooting after installation, Repeat the previous steps until step 5
:highfive:
Credits :
Thanks to Sammobile.com/ for the ROMs
Thanks to Phil3759 for his great work
Press Thanks if I helped :good:
Okei, so I have tried vol up and volum down holding power and everything...
When I use the vol down I just get straight into Factory Format/Reset
When I go with vol up I get in to download mode
Am I stupid or does this phone not contain any Bootloader like Samsung?
I wanna flash Philz Recovery and I just put it on my phone, was gonna go with Vol Down + Power and flash it from there..
But no, you can not do that! I have read all over and searched Youtube and everything, put there is no one explaining how to install Philz Recovery on my phone...
So I should go with CWM or TWRP then?
mr.lysgaard said:
Okei, so I have tried vol up and volum down holding power and everything...
When I use the vol down I just get straight into Factory Format/Reset
When I go with vol up I get in to download mode
Am I stupid or does this phone not contain any Bootloader like Samsung?
I wanna flash Philz Recovery and I just put it on my phone, was gonna go with Vol Down + Power and flash it from there..
But no, you can not do that! I have read all over and searched Youtube and everything, put there is no one explaining how to install Philz Recovery on my phone...
So I should go with CWM or TWRP then?
Click to expand...
Click to collapse
Flash your recovery via adb.
Follow option 1
http://forum.xda-developers.com/showthread.php?p=45713343
Sent from chdhsheh fhhdud
If you flashed the twrp recovery image from http://xiaomitips.com/guide/how-to-flash-twrp-and-root-redmi-3s/ and cant boot into the recovery using vol down + power ( which is basically fastboot ) or the volume + up ( which is just booting into rom )
To boot into your TWRP Recovery or any other recovery that you've installed
1) Power off your phone ( Don't have any cable connected to it )
2) Volume up + Volume down + power button and hold
3) When you see the Mi Logo appear , Let go of ONLY the power button
4) If you've successfully flashed the twrp image on the recovery, you should be entering twrp mode now.
5) Disable dm-verify from advanced settings.
You're done :good::good::good:
The only reason i made this post was for all the android phones i've used, volume down+power button meant going into recovery mode, and not fastboot mode. this was the first phone with different key mechanics and I thought you guys should know as well
TL;DR? Volume up + volume down + power = Recovery
Volume down + power = Fastboot mode always
Volume up + power / Power button = Normal boot
Great information ??
Sent from my Redmi 3S using Tapatalk
Your method works not every time. From time to time its different.
Here is what for me works.
WITH OPEN BOOTLOADER
I flashed TWRP with Fastboot
fastboot flash recovery recovery.img
>>>directly after flashing<<<
1.) Push Vol+ and Vol- and Power at the same time
2.) If you see the MI-Logo release ONLY the Powerbutton and wait
3.) With a little bit luck you are now entering TWRP
4.) If not, do not release Vol+ and Vol-, the Devicescreen went totally black
5.) Do not release Vol+ and Vol- and push now the Power Button
6.) If you see the MI-Logo release ONLY the Powerbutton and wait
7.) Then TWRP starts (for me)
8.) A few times i landed into the chinese menue, then push the recovery button, with a little bit luck you arrive TWRP
9.) If nothing helps, and the device starts normally, imho the process changes twrp back into the original recovery -- then flash twrp again and start from Point 1.)
NOTE!! If you enter TWRP the first time go to Advanced Settings and tap on --Disable DM-Verify-- .
After i disabled DM-Verify and flashed the Xiaomi.eu Rom the above worked for me without every time flashing twrp.
I worked 6 hours at this workaround
irshad2809 said:
Great information
Sent from my Redmi 3S using Tapatalk
Click to expand...
Click to collapse
Glad buddy
Thanks, OP.
Just would like to confirm that disabling DM-Verify option does not make the phone go into Recovery/Bootloader mode via Advanced Power Options menu while the phone is ON.
dixit.sankalp said:
Thanks, OP.
Just would like to confirm that disabling DM-Verify option does not make the phone go into Recovery/Bootloader mode via Advanced Power Options menu while the phone is ON.
Click to expand...
Click to collapse
Just flash this
https://forum.xda-developers.com/xiaomi-redmi-3s/how-to/rebooting-fix-redmi-3s-3s-prime-t3543435
in the latest version of twrp there is no option of disable dm verify
sohailalam said:
in the latest version of twrp there is no option of disable dm verify
Click to expand...
Click to collapse
Its not there. Somebody pls suggest what do we do?
ironfreak said:
Its not there. Somebody pls suggest what do we do?
Click to expand...
Click to collapse
Hello bro you can flash lazy-flasher-noverity-opt it does the same work if you want link then it's here
lazyflasher-no-verity-opt-encrypt.zip | by Darkstar085 for Redmi 3s/Prime
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
idk why i ported this i just think that will give me the best stable experience ever lol
BASED ON G610F G610FDDS1CTE4 TURKEY VERSION
HOW TO INSTALL
Step 1: you will needing odin becouse you cant install it from your twrp (i tried installing it from twrp and it gaved an kernel error so odin is the best for now)
Step 2: select the recovery file as AP becouse AP contains recovery and others (it only has recovery soo it will not effect your custom rom)
Step 3: Go to options and close auto restart (optional)
Step 4: Reboot your phone to download mode and plug it to your pc
Step 5: Press start
Step 6: If you enabled auto restart; When it restarts press Vol Up and Home button for your recovery. If you didnt enabled auto restart; Press Vol down power and home button to restart your phone. After screen goes black. Press Power Vol Up and Home button
(Btw if you want to go back to normal twrp u can. But you will needing odin again.)
BUGS:
-SD Card updates wont work (why u want to update it anyway u are on custom rom)
-You cant install roms. You have to switch back to ur twrp or other recovery if you want to install roms (its stock thats why u cant),
-Recovery will show it's android 8.1.0 but its not true.( becouse oreo bootloader)
-You tell me
Download:https://drive.google.com/file/d/1dBUzEF65f9HAqo5Vouxld-VHJuzR4Iu5/view