Rapoo E6300 bluetooth keyboard problems - Nexus 7 Q&A, Help & Troubleshooting

Not so much Nexus-7 specifically related, as the problem occurs on both my Droid 4 and my Nexus 7, but I hope someone can help me solve this problem:
Starting from a 'clean' situation with the keyboard unpaired to the tablet, I set the keyboard in pairing mode by pressing the 'connect' button until the bluetooth LED starts flashing rapidly.
I then go to the bluetooth settings of one of the above devices, I select the bluetooth keyboard from the 'available devices' list.
My Android device then prompts me to enter a certain passcode on the keyboard, followed by the ENTER key.
I do this and the keyboard successfully registers in the Android device as a paired device.
At this point I am able to use the keyboard without any problems.
However when I turn off the keyboard, or let it go to sleep, and then turn it back on later, the keyboard connects successfully (I can see 'Connected' in the bluetooth settings screen), but it's not possible anymore to enter any text or use any of the keys.
I try reconnecting several times each time turning the keyboard off in between, but alas, nothing helps.
If I 'unpair' the device from my Android device and re-pair it, it works fine again until the next time I turn it off.
Needless to say it's not really a workable solution having to re-pair the keyboard each time I want to use it.
To rule out the Android devices being the culprit, I have tested the same process with another bluetooth keyboard (Logitech DiNovo Edge) and it doesn't have the problem.
However, using the Rapoo keyboard on a colleagues iphone, everything works perfectly.
I've come across other people having this problem, and some say it used to work fine in Android 2.3, but at this moment I haven't got a device with 2.3 on it to test with.
I tested with a colleagues 2.2 Android phone but that one wouldn't even pair.
I will try tonight with my girlfriends 2.3 Moto Defy+ and report back.

Didn't get around to trying this on 2.3 yesterday.
I also sent an email to Rapoo support asking them if they knew any fix for this, and this was what I got in the mailbag this morning:
Dear Customer,
Hello!
Please note that E6300 is specially designed for Ipad.It works with other computers which use Windows or Mac operation system, the shortcut keys for Ipad may be useless.Besides, the only cell phone it supports is Iphone 4 and the the shortcut keys for Ipad may also useless.
Thanks for your support to our products.
Best regards,
Click to expand...
Click to collapse
What a bunch of horse dung...

i have the same problem with my nexus 7 and the rapoo 6300.
i allready tried different kernels and roms.
at first i also had to repair the keyboard once it disconnects. (happens quite fast, sometimes after not typing for some seconds, but sometimes it keeps connected and usable for about 10 minutes)
but i figured out that you don´t have to repair it when it disconnects. when it says "connected" but it is not possible to write something, just wait some seconds, and it will work. (at least at my device, stock kernel @ smooth rom)
still very annoying, but i think it shows that there is a solution for this problem.
After some research i found out that some people had this problem since android 4.0. (worked fine at gingerbread)
but i tested the keyboard at a friends nexus s with jellybean miui rom and it worked fine.

gnomedroid said:
After some research i found out that some people had this problem since android 4.0. (worked fine at gingerbread)
but i tested the keyboard at a friends nexus s with jellybean miui rom and it worked fine.
Click to expand...
Click to collapse
Another observation, when connected to an Ubuntu 10.04LTS (kernel 2.6.32-44-generic) desktop, the same behavior happens.
To repeat, you can pair the keyboard, and after the first sleep, even when it reconnects (pressing the Connect button helps), it does not generate input events for the desktop either.

Same problem here. Tested with a GNEX and a N10. Even with the latest 4.2.2 it shows the same problem … one sleep and you have to pair again. POS!

Any comments on Nexus 7 with CM or AOSP? I heard these mods use a different keyboard driver...

: I tested with a colleagues 2.2 Android phone but that one wouldn't even pair.
I will try tonight with my girlfriends 2.3 Moto Defy+ and report back.[/QUOTE]
I tested Rapoo e6300 against a HTC desire HD with 2.3.1. No chance: it will not pair. Rapoo can not be used with my N7, it just worked ten minutes after it is paired, and then it starts disconnecting. And no input gets through. Waiting a few seconds have no effect, Bluetooth is basically not working.

Got major connectivity issues with Rapoo E6300 here too on Nexus 7 with SmoothROM 4.4 (Cm based on 4.2.1)
Swapped it for a Rapoo E6100: works great! I did get some issue with reconnecting to Nexus 7 after I tried to pair the keyboard to my HTC
One X (which didnt work at all).
Had to reset the whole connection with nexus, but as long as i dont switch off Bluetooth on the nexus it works fine. Switching off or sleepjng the keybord is fine.
Sent from my Nexus 7 using Tapatalk HD

Related

Bluetooth and HTC touch problems

Does anyone else have a problem with their Bluetooth and HTC touch? I have tried 2 motorola and a LG BT headset and no one can hear me, but I can hear them. I tried pairing and repairing. I deleted it and added it as a new device. I have even tried the BT with another phone and it works with that phone with no problems, so I know it's my phone. I even tried a hard reset. Does anyone have a solutoin to this problem? I have the latest ROM update from HTC's website for a Bell HTC touch. My motorola headset was working fine, but I think after the latest Bell ROM update it stopped. Does anyone else have this problem or can anyone suggest a solution? thanks. paul.
my jawbone did this but my plantanics 510 fine
My jawbone works fine but there's a problem using hands free connection with my '05 range rover. The phone and the truck connect but then the connection is dropped. My buddy has a motorola razor and his phone works great w/my truck. It appears to be my phone that's the problem. Any suggestions on this?
Thanks so much.
jarmijo said:
My jawbone works fine but there's a problem using hands free connection with my '05 range rover. The phone and the truck connect but then the connection is dropped. My buddy has a motorola razor and his phone works great w/my truck. It appears to be my phone that's the problem. Any suggestions on this?
Thanks so much.
Click to expand...
Click to collapse
This thread is 7 months old...
What ROM are you running?
I am running the NFSFAN 6.5 rom V11 and have he same issue with a motorola BT headset.
edit: i just noticed that the initial question was about a newer ROM update and bluetooth, but ill leave my initial reply here, cuz i often look for solution in old posts, so if this can help anybody :
NFSFAN 6.5 rom V11 and bluetooth
i dunno, but my bluetooth stuff somehow works with the 6.1 update, if you cant find any working solution within an hour, id suggest using a "well tried and tested" ROM version, like the 6.1
i stopped picking the "latest and greatest" in cars, devices, apps, or O.S. for the last two years, and been living a whole lot happier since.
about my 6.1 bell mobility ROM and bluetooth :
i like to tweak my weapons alot, my htc touch has a 6.1 ROM update, and i use bluetooth everyday, and it KINDA works well, enough for me anyway...
listening to mp3 and flv everyday on the transit,
then switching at work on the audio dongle adaptor on the pc,
using an pair of sonorix bsh-100 ( foldable stereo headset + optional plug-in mike)
to me the thruth is that bluetooth is a ****ty technology, i love it, and it's well taught,
but the developpers quickly code ****ty interfaces to it.
my settings all work from htc touch to dongle, but i often have to connect the touch to the headset like up to 3 times, where it tells me its connected, but isnt, when i hear the beep, it means it actually IS.
same at work, connect sometimes once, twice, even four, it eventually connects.
it's isnt button wear off or bad contact, its just the code is ****.
i rented a SUV that had bluetooth, tried connecting my phone, worked first time, a week later we rented the same SUV model, and for the whole trip i wasnt able to connect at all... back at the rental we tested the SUV with the clerck htc touch ( nice coincidence ) it worked right away.
i want to add here that whenever i try to connect through bluetooth, it usually works the first time.
my point is, bluetooth creators did a fine innovative job, but werent supported by developpers.
test your bluetooth phone alot with friends owning bluetooth accessories, youll detect behaviors after a while, and will learn to know its "demons" !
a bluetooth everyday user
V13 seemed to fix the issue
Just upgraded to V13, seems like BT works a lot better.
A bit on my history with BY, I just upgraded from a motorola V710, had a Moto Q for a few months too. Never had any issues with BT using the same Motorola BT earpiece, and varouis others through the last 5 years or so. Always worked like a champ, this was my first experience with BT issues.

bluetooth keyboard in HD problem

when I connected HD with iGo Stowaway Ultra—Slim Keyboard, if I type too fast, HD couldn't follow my input, like I input work, HD only show k, only type very slow, HD can follow, but I try in Samsung I900, It works very good, how can I fix this problem
type slower! lol jk. I don't know. Didn't even realize I can connect the iGo keyboard to this. I'll be sure to give it a try.
I would also check for other BT devices, this problem gets worse if my laptop (with BT) is close. I obviously don't type fast enough as away from the laptop the problem goes away.
I have had this problem, and I am unsure how it was resolved (perhaps not helpful) but I shall speculate.
I had a think outside bluetooth keyboard, which had this exact problem with input that you describe. I have been having problems with three buttons not functioning for a month of so and they finally just stopped working altogether. I love the keyboard so I ordered a new IGO bluetooth keyboard, installed the drivers which came with it, and the keyboard works perfectly without lag.
NOW, my guess is that,
1) the driver is the issue (ie you need an upto date one)
2) I have installed the HD FREEZE FIX which was released. This COULD relate to the bluetooth keyboard as the prob with freezing occurred in the software keyboard while inputing data.
Perhaps this isn't very helpful, but I thought I'd ahre my experience with you and let you know that it WILL work, perhaps try one of the two methods above and see if it helps.
BANE

Bluetooth problems? Anyone else having them?

I was wondering if anyone else is having issues with bluetooth on their Archos 101. I can't tell if perhaps my hardware is flaky, or if its a software issue.
Basically, bluetooth seems to work sporadically. Sometimes it pairs like it should, other times it is a fight just to get it to pair with my phone, laptop or bluetooth keyboard. Often times I have to reboot just to get it to pair and it seems to really struggle if both bluetooth AND wifi are enabled.
I'm running the stock current ROM and outside of the android market APK and some basic apps, I haven't done anything wacky or weird to it.
I guess I'm just looking for some validation and/or confirmation and/or possible fixes if any.
Sorry, i have experienced no issues with bluetooth apart from forgetting to switch it on
I have had some issues as well. Paired a set of Motorola S9 bluetooth stereo headphones. They pair and connect fine, but the audio is choppy. It will sound fine for 15-20 seconds and then it will skip, go silent, bring back audio, etc. Tried playing same audio through unit speakers and no problems. I also have an Archos 70 tablet and have no problems with the same headset. Both have been updated with the Froy 2.2. Starting to think it might be a hardware issue with the 101. Anyone have any other thoughts?
Never had it working
I always get paired but not connected. Never have been able to get it to work.
The same problem. Pair, but not connect!
I've never found problem about bluetooth (Archos 101 - firmware version 2.1.08)
Pair & connect with DELL BH200 (Bluetooth Headset) - work fine.
Pair & connect with DELL BT Travel Mouse - work fine.
i'm getting major issues on my new replacement 101. did you ever sort your issues? i'm using latest fw.
its really hit or miss (mostly miss) whether it actually see's any BT devices when it scans. yet wifi works fine 100%
I experiment something very similar with my 101, this both on standard Android and Urukdroid 0.7 or 1.0 :
- very difficult (multiple tries have to be done) to get successfull peering.
- with BT enabled phones
- with BT GPS (G-Sat BT-368i, wich is given in forums to work well on our gen8 devices)
- for the GPS (which is the BT device that interest me) : impossible to have it working directly from GoogleMap, I got some success with "Bluetooth Gps Provider" appli from Market). This device is never shown as connected from the BT Parameters.
Could it be a hardware problem, that is do I have to return the tablet to archos ?
Thanks for your experience feeling about the fiability of the BT on 101 tablet.
It generally works fine for me, but a couple days ago it got stuck, and it would not allow to send me files to other devices until I rebooted the Archos. The same day I was also using bluetooth headphones and the wifi network together, and I had audio stutter problems. It seems that wifi has a negative effect over bluetooth stability.
It works for me... though
Bluetooth is not working on my Archos 101.
When I try "scan for devices" it shows 1 or 2 devices, while my HTC HD2 shows about 5. When I click again on "scan for devices" - sometimes it is howing different device, sometime shows bloothooth adress only.
Evan my HTC can see Archos, it cannot pair with it. Archos never see my HTC.
Zalek
Same here
I can pair with my phone (htc desire hd) but cant connect.
I need my phone connected for gps.
Nobody has a solution ?
No solution ?
Thanks
BT has some issues for me too with an A43.
BT+wifi means i either can't get a proper internet connection, or BT devices disconnect.
quite annoying, because i want to be able to use my BT mouse with the internet browser.
and my jabra halo headset connects in dumb mode (no media/volume controls) most of the time.
which is annoying, because it means my headset is stuck on the volume i last used.
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Think I've sorted out bluetooth problems
I also have had real problems with the bluetooth on Archos 101 - pairing but not connecting, causing "Location & Security" to crash when I attempted to open it (in settings). I updated the firmware to 2.4.19 and then rebooted - still the same problems, so I did a full initialization and hey presto all problems seem to have vanished ! A pain because I've now got to re-download all the apps I had before but at least the tablet is working as it is supposed to.
Hope this helps others.
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
Hello
How can I backup all my data?
Thks
Followed your instruction however it is not work for me. I am running the last patch (2.4.19)
Thanks
luiznaufel said:
Hi Lara and other fellows! For me, after all sort of tries, the solution comes with full reinitialization. Plug the unit to AC outlet, backup all your data, go to settings, repair and formatting and full reini. It seems that when we update firmware the things go a little crazy with the bt side. Good luck!
Click to expand...
Click to collapse
It is not working for me.....
Archos 101 Bluetooth Problem - Known issue?
I'm having the same problems. I contacted Archos support and they told me to do a full reinitialization. This did not resolve the issue.
When scanning for bluetooth devices, nothing shows up until the 5th or so attempt.
The mac address of the discovered device is shown instead of the device name.
When attempting to connect it fails several times, then it pairs but says "paired but not connected."
When I finally connect the audio stutters. It's extremely choppy... useless.
If the bluetooth is left on, the 101 will eventually freeze when the screen sleeps and cannot be woken up by pressing the power button. The green light stays on when this happens. Pressing the button a few times or holding it in reboots the 101.
After reading all the posts I've come to the conclusion that Archos likely knows about this issue.
Archos, if you're reading this, for the sake of your customers, please admit this is a known issue and let us know if it's fixable and when a possible fix may be available.
I encourage everyone to open a ticket with Archos support.
If you purchased your 101 used and it's been registered by the previous owner, you can register it and the registration will be instantly transferred to you.
Create a support account at archos.com
After you create an account you can add products to your account and submit tickets for them.
Firmware: 2.4.81
Board ver: A101IT-V5
OMAP ver: ES1.2
Boot ver: Unknown / 4.04.000000
My bluetooth device: Jensen WTB210. Works fine with several other android devices.

Bluetooth Keyboard

hey guys,
is there a way to pair a bluetoothkeyboard with the defy? And is there a cable to pair the defy with a tv?
Mfg.Homer
As for the cable to TV, I don't think so.
But wouldn't any Bluetooth keyboard just pair with the Defy, or is that dependent on some profile that is not present on the Defy? I.e. do you own a keyboard and can't make it work, or do you just want to know if it would work?
There is a keyboard from "HAMA" which works...but you need any add-on...
keyboards
Tried a chinese bluetooth kb ... driver didn´t work.
3rd party drivers did somehow, but have been a pain in the ass in daily use.
Hardware keyboard which would be best in thinking of energy doesn´t because of missing USB Host.
Still: Defy ist the best phone I ever had ... but the road is loohooong ...
A quick Google search suggests there are enough keyboards to choose from. Just check if there is an Android driver and you should be fine.
Don't really get why one would want a keyboard though. It kind of undoes the portability and it seems a hassle to use. Don't get me wrong: I loved the keyboard on my old HTC Wizard. But that one was integrated in the phone which might be a better option for you as well!
AgentSmith said:
A quick Google search suggests there are enough keyboards to choose from. Just check if there is an Android driver and you should be fine.
Click to expand...
Click to collapse
- would be so cool if it would be that easy ...
AgentSmith said:
Don't really get why one would want a keyboard though. It kind of undoes the portability and it seems a hassle to use. Don't get me wrong: I loved the keyboard on my old HTC Wizard. But that one was integrated in the phone which might be a better option for you as well!
Click to expand...
Click to collapse
- because you need some sort of time machine to get another waterproof mobile with a querty keyboard.
I would have liked a micro one for a adventure trip to proper blog and chat - the phones are nearly usable for that.
It works with Froyo !
Sorry for such a late post. Anyway, I bought this cheap BT keyboard some time ago. Whilst running the stock Eclair ROM, I had to use 3rd party applications to handle it, but never without lots of issues. I had bought it for test purposes, since Android was not listed as a supported platform. But after I flashed Froyo (in my case, the 3.4.3-11 UK ROM), the keyboard just works as it should. After it was paired (the digit sequence specified on the phone - I chose the widely known 0000 - must be entered in the BT keyboard, followed by <Enter>), I just turn the keyboard on (with the Defy's BT radio also turned on, of course) and press any key. The bluetooth link is immediately established, and I'm able enter data to any applications through it.
Just my 2 cents...
Regards,
Carlos
good news
thanks4info.
I will jump on the CM7 train as soon as (a)gps is ok and will try there.
Still hoping to get usb host running, as other projects successfully activated it per software. Will post results after playing around with CM7.
casouzaj said:
Sorry for such a late post. Anyway, I bought this cheap BT keyboard some time ago. Whilst running the stock Eclair ROM, I had to use 3rd party applications to handle it, but never without lots of issues. I had bought it for test purposes, since Android was not listed as a supported platform. But after I flashed Froyo (in my case, the 3.4.3-11 UK ROM), the keyboard just works as it should. After it was paired (the digit sequence specified on the phone - I chose the widely known 0000 - must be entered in the BT keyboard, followed by <Enter>), I just turn the keyboard on (with the Defy's BT radio also turned on, of course) and press any key. The bluetooth link is immediately established, and I'm able enter data to any applications through it.
Just my 2 cents...
Regards,
Carlos
Click to expand...
Click to collapse
Ive got the same keyboard but this does nto work at all (CM10 ) it says its conected, but theres no text input, even with thrid party apps.
useless piece of junk.
Any recomendations for something that actualy works??
2Pints said:
Ive got the same keyboard but this does nto work at all (CM10 ) it says its conected, but theres no text input, even with thrid party apps.
useless piece of junk.
Any recomendations for something that actualy works??
Click to expand...
Click to collapse
Wow! For a long time, there was no posts at all in this thread. Ok, back to business. You see, I'm running CM10 too. In fact, due to some issues, I'm still on Quarx 11/17 build. Anyway, until I saw your post, my keyboard was forgotten in a drawer. I took it off, turned it on, pressed a key, and, although it was already paired with the phone, an entry in the status bar came up, which, upon being tapped, asked me to either allow or deny the connection. After a couple of times answering 'Yes', the bluetooth icon, in the status bar, turned blue, and, from that point on, all the text I entered was correctly taken by the phone, without any issues. Have you gone through this phase as well?
EDIT: have just flashed Quarx's CM10.1 05/27 build. Couldn't find a way to make my BT keyboard work with it. Haven't tried his CM10 new buiild, but as they seem to share all the radio (BT, Wifi) parts, it is most probable that it won't work there either. I'm already back to his 11/17 build.
there's some keybords that works, but it depends on the ROM too.
I had a chinese one, and it was a lot better to type than the touch keyboard, but, for me it wasn't very useful because I was unable to use some accents, and I usualy type in Portuguese.

[Q] T330NU Bluetooth Issues

Hey,
I own a T330NU. I bought a Bluetooth Keyboard to use with it. Everything was fine for a month, and then all of a sudden, the keyboard started being "unable to communicate" with Bluetooth. I unpaired it, tried to pair it again and it still didn't work. I NEEDED to use my keyboard, so I did a reset and restore and it worked fine after that. Until another month later, when the same thing happened. This time, a reset didn't help.
I'm able to connect the keyboard to other devices, such as my Macbook and iPhone. I'm able to connect my tablet to other Bluetooth devices, like an audio speaker and my boyfriend's T330NU. I'm also unable to connect my keyboard to my boyfriend's T330NU.
I tried rooting my tablet to see if it would help. It did not. I deleted the Bluedroid folder. That did not help. I tried turning my tablet on and off. That didn't help. I tried most of the Bluetooth keyboard apps on the Play marketplace, that did not help.
There aren't any custom ROMS for the T330NU, so I feel like I'm screwed. I NEED to be able to use a keyboard with my tablet. I'm waiting for the Stock ROM to download and MAY try that. But c'mon! I'm also going to try out an Apple Bluetooth Keyboard tomorrow, but if it doesn't work, I may pull out my hair. AGH! Any ideas?
hi,
from your post;
I'm also unable to connect my keyboard to my boyfriend's T330NU.
------------------
suggests the problem is the keyboard not the tab.
as far as i know bluetooth devices need batteries, perhaps that's the issue?
m
You were right! Weird! Battery fixed it!

Categories

Resources