Hey every one I'm new to xda and I got my samsung vibrant rooted with the stock system recovery and was working fine but than I decided to do some apps and file transfer from another android phone to it and after that my phone kinda froze on me. So I rebooted the phone and boom nothing happen after the galaxy s animation, its just stuck there then the screen went black out. I rebooted again and this time I went to the sustem recovery mode and try to do the data reset but it couldn't fix it either. I tried to connected to my computer but since the phone wasn't fully booted into the home screen my computer are unable to detect the phone driver. I reconnect the phone and computer together, and this time I got to where it say's "downloading" "do noy turn off target", what is that mean? is it download something or is that I'm suppost to do something to it. Please can someone help me out. I've already download the stock firmwire but couldn't be able to transfer to the mass storage cos the phone couldn't boot beyound the galaxy s animation and eventhough its in the system recovering I still couldn't get it to connect to the phone mass storage. What can I do to fix it?.
You can take the battery out at that screen, but I don't know if it's going to fix your overall issue.
Take sd out. Hook to computer with adapter. Move stock nandroid to sd. Replace sd in phone. Boot into clockwork recovery. Restore nandroid. Reboot.you are now stock with root.
one thing
I know what I did is stupid but at lease I learn my lesson. I would really appreciate if someone could help me out.
help
I tried but its not working cost the phone doesn't read what's on the sd card it read only the mass storage which is the 14g not the 2g memorycard.
The SD card won't be in the phone so of course it won't read from it. It will read from the interbal memory, so do it from there.
Sent from my SGH-T959 using XDA App
Kld4ever2008 said:
Hey every one I'm new to xda and I got my samsung vibrant rooted with the stock system recovery and was working fine but than I decided to do some apps and file transfer from another android phone to it and after that my phone kinda froze on me. So I rebooted the phone and boom nothing happen after the galaxy s animation, its just stuck there then the screen went black out. I rebooted again and this time I went to the sustem recovery mode and try to do the data reset but it couldn't fix it either. I tried to connected to my computer but since the phone wasn't fully booted into the home screen my computer are unable to detect the phone driver. I reconnect the phone and computer together, and this time I got to where it say's "downloading" "do noy turn off target", what is that mean? is it download something or is that I'm suppost to do something to it. Please can someone help me out. I've already download the stock firmwire but couldn't be able to transfer to the mass storage cos the phone couldn't boot beyound the galaxy s animation and eventhough its in the system recovering I still couldn't get it to connect to the phone mass storage. What can I do to fix it?.
Click to expand...
Click to collapse
Turn off the phone, take out the battery and take out the SD card, try to get your hands on a sd card reader for your card so you can fix what you did without using your phone to mount it. Copy the rom or stock firmware over to the card and use the recovery, wipe data/factory reset and then try to load up the stock firmware. if all else fails do a hard reset:
To hard reset Samsung Vibrant, follow the steps below:
Step 1. Turn your Samsung Vibrant off. If your Samsung Vibrant is frozen, pull the battery out and reinsert it.
Step 2. Hold the Volume Down button.
Step 3. Press and release the Power button.
Step 4. You are now presented with a menu that allows for Fastboot, Recovery, Clear Storage, and Simlock
Select Clear Storage by pressing the Volume Down button, then press and release the Power button.
Step 5. Choose one of these: Volume Up for YES and Volume Down for NO. If you selected YES, all data including third-party applications will be deleted from the Samsung Vibrant.
That is for the default recovery so depending on the recovery you are using try to wipe everything and flash the ROM from the sd card, if you need help PM me or contact me on chat.andirc.net #droideris, or irc.andirc.net #droideris
Best of luck!
hello
Froyo need an update to the root user. delete some files and now will not start. I can not connect via USB. in case you have an update by sd
please help
Can you get into download mode? Pull your battery, put it back in, open the phone, hold the 1 button down on the keyboard while holding power. Does this get you into a special screen?
gracias
deja pruebo
not start the phone. because they replace a file. I can do?
serves to download mode
Can you get into recovery mode? If you can then I would take out your SD card from your phone and insert it into a card reader and copy one of the stock builds onto your Sd card. Put SD card back into phone, boot into recovery and flash the build.
I'm sorry for asking so much. is that I am new to this.
where I can download it. is hard to find me I'm from mexico
but thanks
had not tested the download mode
thanks
Flash this in clockworkmod
http://forum.xda-developers.com/showthread.php?t=1027904
Sent from my Epic S 4G using XDA Premium App
I have weeks without abanzar anything until you discover this page
I see no remedy je je
thanks
Booting blues
I am having booting problems with my Epic. running Android 2.2 with stock EC05.
If I do an nandroid restore it goes through normally but then hangs prior to the reboot. Have to a battery out reset, wakes up in roboot menu, and then reboots normally.
Did a cold reboot (<1>+Power on), gave me the Downloading Do no switch off screen. this persisted for over 10 minutes with no progress. I then took out the battery, reinserted it, and it took off normally.
Please advise and help!
My problem was that it started.
I did was upgrade to Froy.
I worked
I hope to serve you
http://forum.xda-developers.com/showthread.php?t=1082783
odin and download the rom it. do not use the app does not use third
How To Install
Odin (download) to stock EC05 (download), use the CWM3.0.2.5 one-click (NOT CWM2.5) (download), wipe data/cache three times, and flash the ROM.
Hi, yesterday I played with my phone. I had CM9 stable version, but I wanted some new kernel. I downloaded semaphore for my phone and rom and tried to instal it. but after turning my phone on I saw only rebooting animation for about 20 minutes. I tried to use my backup (made in CWM), but it does not wotk. it happened the same thing (looong boot animation). I tried one more time to restore my backup, but it was worse. In recovery I didnt see any card(some error with mouting it). I tried via Odin flash new rom(official in my country), but after it I see only boot animation of Samsung,see the big S,after a few seconds is my screen black, only in irregular intervals my phone vibrates and soft key lights.
I can see download and recovery menu. In Odin I am unable to see my device, so I can not try to flash another rom.
Can somebody help my, or at least say me, whats happen,please?
(sorry for my language,but google translator cant make miracles and my language skills are not very good)
radmik said:
I can see download and recovery menu. In Odin I am unable to see my device, so I can not try to flash another rom.
Click to expand...
Click to collapse
First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....
need to know what is your phone model . Check Here to chose your forum/Guide by Version of your phone or you will have more problems by using wrong solutions due to different versions of Galaxy S
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
use only ROM and solution for your model
(Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.)
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Now does ur mobile boot ? Or is it stuck in the logo ?
Hakuna matata !
Sanjuujosephh said:
Now does ur mobile boot ? Or is it stuck in the logo ?
Hakuna matata !
Click to expand...
Click to collapse
Well I already stated (if you read my whole thread) that it works normally, running 4.4.2 atm without microSD card inserted, it works like the past except for two points:
1- My root access is gone.
2- I can't reboot into recovery mode at all, no matter what I try.
Wow u screwed up ur recovery itself ....wow u r awesome ! Just check if it goes to download mode if it does then flash it again with the latest firmware .... After flashing immediately try going to recovery and if u do ..... do the reset and wipe cache
Hakuna matata !
Sanjuujosephh said:
Wow u screwed up ur recovery itself ....wow u r awesome ! Just check if it goes to download mode if it does then flash it again with the latest firmware .... After flashing immediately try going to recovery and if u do ..... do the reset and wipe cache
Hakuna matata !
Click to expand...
Click to collapse
After I flash the firmware it automatically goes to a recovery screen, a progress bar gets filled then opens the Android system normally. After that when I try to go to recovery mode again it goes back to download mode again with the error text "Could not do normal boot".
Problem.... Fixed? .___.
Well for some reason on the third (and thought it's hopeless) attempt to flash the firmware again, I managed to open recovery mode after it, I was kissing the Reset Factory button.
As long as I find this weird, working on many attemps (maybe Samsung software itself fails?) I find this thread useless, thanks given to Sanjuujosephh! I inserted my microSD and it's working now, rebooted again into recovery and it's working as it should be.
citBabY said:
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Click to expand...
Click to collapse
Dear friend,
Try my rooting thread at http://forum.xda-developers.com/gal...ps/galaxy-s5-mod-apps-kitkat-grand-2-t2821638
This is made specifically for the KitKat Grand 2.
The message "Could not do normal boot" came as a result of using 4.3 recovery on 4.4.2.
Do not ever attempt to revert to 4.3 as this will HARD BRICK YOUR PHONE'S MOTHERBOARD.
---------- Post added at 06:49 PM ---------- Previous post was at 06:46 PM ----------
citBabY said:
Hello all, so today I downloaded 4.4.2 KitKat firmware from sammobile site, flashed it without backup or any **** (I've done it before on my tablet and worked like A CHARM) and "finally" got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot" and then "ODIN Mode" and the rest as I used to see before.
Then I started searching the web for solutions relating to the bugs I noticed earlier, found a thread instructing to remove battery, SIM card and microSD card, then re-installing them again except the microSD card... It actually fixed the stated bugs! But I still don't feel relaxed. I want to fix this (idk if this is called "bricked" or no!) issue about recovery mode, and get back to 4.3 as this scared me as f**k.
NOTE: I flashed CWM and TWRP .tar files that I already had, to no avail.
Click to expand...
Click to collapse
Dear friend,
Try my rooting thread at http://forum.xda-developers.com/gal...ps/galaxy-s5-mod-apps-kitkat-grand-2-t2821638
This is made specifically for the KitKat Grand 2.
The message "Could not do normal boot" came as a result of using 4.3 recovery on 4.4.2.
Do not ever attempt to revert to 4.3 as this will HARD BRICK YOUR PHONE'S MOTHERBOARD.
اقرأ الموضوع اللي كتبته خصوصي للجراند 2 بنظام كت كات
رسالة Could not do normal boot طلعت بسبب استخدام ريكفري قديم ع الكت كات
الموضوع الجديد فيه ريكفري جديد.
Help me plzz
hey.... wht did u do evn i m stuck there??? plzzz help..got KitKat on my Grand 2 got KitKat on my Grand 2 Duos. Then it all started happening after that:
I first started noticing some strange and weird bugs, like I can't lock the screen, notifications never get cleared, it felt like the phone got frozen.
It is known for sure that after I installed the firmware, the recovery mod that I had is gone and replaced with stock one, so I tried flashing a .tar file for rooting my phone (It was actually to use via recovery, not via flash... I lacked information back then), after flashing it, I could boot into recovery mode no more. Even after flashing the 4.4.2 firmware again, I even saw it installing a "recovery.img" file but with no good. When I try to boot into recovery mode it writes at the top "Could not do normal boot"
citBabY said:
Well I already stated (if you read my whole thread) that it works normally, running 4.4.2 atm without microSD card inserted, it works like the past except for two points:
1- My root access is gone.
2- I can't reboot into recovery mode at all, no matter what I try.
Click to expand...
Click to collapse
i think you should reset your phone
and if it doesn't work then try another country's rom
thankyou
hey bro, I have problem same to u..
Bro...I have same problem..?? I cant go to recovery mode showing Could not boot normally...etc..This happened after I tried CWM using Odin ..I always go download mood and...when i pressed factory reset button ..it didnt rest and go download mode again...plz help me bro...thanks
As long as I find this weird, working on many attemps (maybe Samsung software itself fails?) I find this thread useless, thanks given to Sanjuujosephh! I inserted my microSD and it's working now, rebooted again into recovery and it's working as it should be.[/QUOTE]
Bro, please don't use king root or any other root.
Solution
Please download the stock firmware and then go to download mode flash the stock firmware and root your phone again. Then recovery mode will work.
Thank you
Sorry for errors.
Sent from my SM-G900H using XDA-Developers mobile app
I'm a newbie but I fixed mine...
I've had this happen and it is frustrating to say the least. But I fixed it though. This is what I did: CAVEAT: Please read up all the FAQs, search the right firmware for your phone and the appropriate versions, KitKat vs Jelly Bean, etc. otherwise if your phone is bricked...don't blame me.
I have a 2nd-hand Galaxy Grand 2 and so warranty issues are a non-issue for me. All the files I've found were downloaded on this forum. I flashed ROM with my PC with Odin program installed.
I used Odin3 (v.3.07). (To install Odin program search the this forum). I also reflashed the recovery TWRP file "twrp_ms013g-build2.tar" Including the firmware G7102 Stock. My file was: G7102DDUBOB1_G7102ODDBOB1_G7102DDUBNK1_HOME.tar.md5. (Search for it.) Oh, you may want this file: CF-Auto-Root-ms013g-ms013gxx-smg7102.tar.md5 which may help with rooting your phone if you haven't already done so.
I did the Recovery 3-button Samsung phone groping procedure (you know what I'm talking about Volume Up/Down button + power + home button)... but to no avail...I keep getting that boot loop (Unable to normal boot...etc). You know that stupid "Downloading" Android logo (with the blue worded script on the top left-hand corner) with message ..."Downloading ...Do not unplug source..." Well, I plugged the USB cable to the phone to my computer and Odin program recognized it (it'll read "Added"). The phone didn't give any indications that it was doing anything. Btw, if your Odin program doesn't recognize your device then you should find out why it doesn't. If it recognized it before and you flashed with the Odin program before, I don't see why it won't recognize it now? Some say it's the USB cable but I can't logically accept that kind of superstitious BS. Come on, it's a copper/aluminum wire cable wrapped in pvc -- not a script. A cable is a cable is a cable. If it worked before, it'll work again unless it's cut inside the pvc tubing. You can use a digital multimeter to easily test that for continuity (albeit with really tiny leads to be able to connect to the mini USB side). Anyways, if your Odin program won't recognize your phone, maybe try using a lower version, or re-installing, or another similar type of program that will work. I'm assuming you did install the Samsung USB driver for your PC (e.g. mine is -v1.5.61.0 -search for your appropriate version) so that your computer will recognize your phone when cable is hooked up.
DON'T FORGET TO have the "Auto Reboot" and "F. Reset Time" boxes checked on the Odin program. Then select PAD button and browse for your TWRP file (above) and hit "Start." The Odin will flash it and you'll see a light blue bar under the Android logo (on your phone) that will go from left to right and when finished....whooooohooo the phone auto restarts back to your last OS state without losing any info on the phone. At least it worked for me. Hope that helps. Sorry for the long post.
hi i am in official android 4.3 on my g7102 and i wanna install a recovery file. but every recovery file i tested dosnt work on android 4.3. can you help me?
If u have knox bootloader do not try to downgrade just get kitkat one and in odin check phone bootloader update
Seems like u really guys screwed up the recovery. Somehow on my first try of flashing a zip file (recovery), i got stuck on download mode and wont boot normally. When I fixed the problem, the phone boots normally but the recovery is the only problem I got. I fixed this problem for about 10 days ago, all i did was to reflash the recovery again, orrr flash other version of the recovery (if the downloaded recovery version didnt work) or flash other recovery if the another recovery didnt work. Make sure the recovery is working on the version of you're phone (jelly, kk, lollipop, marshmallow or nougat) and working also on the model version.
I know this is an old thread but I hope this reply helped
hello guys.
first i will start with the beginning. i have a grand 2 duos g7102 phone. i rooted the phone and installed CWM recovery in order to flash custom rom CM 12.1 Lollipop 5.1.1 everything was running well until i upgraded to CM 14 Nougat 7.0 COSMO, i didn't like it and when i wanted to get in recovery mode again it stopped working. Now i can't boot in recovery mode at all. Not showing CWM recovery like before only recovery booting for few second and after that the dead android and No command and there is more writing down the screen like Supported API: 3 but it is hard to read because the screen is always flashing.
i someone faced this problem before please help !!!
thanks in advance
Guys guys i had the same problem with my grand 2 7102.
I rooted my phone and flashed a recovery via odin.
But as i press the button combos it says. Could not do normal boot.
So, i found a solution for it.
Downloaded flashify for play store.
Extracted img. File of twrp recovery provided in the grand 2 thread 😬,
Flashed it with flashify
And guess what i was in the recovery and after that no problem came with the recovery flashing 🙂
If you guys keep having problems with no-pc flashing, try the pc flashing cause this is the better way of flashing other than apps.
I had the could not do normal boot problem
Do this ...
Google cwm test 4.4 ms013g.tar and download it
Put it in PA or PDA uncheck autoreboot keep freset time checked
Flash the file then when you get pass message in odin , remove battery and reinsert it and go to recovery mode directly with vol up + power button.
NOTE : Don't try to normal boot to system
hi all . so i was on aurora 4.1 . clean install etc and all was fine. then one day phone decided to restart itself. at first it wouldnt boot past samsung logo. then i went into reocvery and changed kernel from h vitamin to ram kernel v1 . and cleared dalvik etc. phone booted fine. then earlier was charging phone at home (official charger) . went ot check phone about 20 mins after and no response. even tried removing battery waiting 10 mins then power on nothing. no vibrate no light. so i realised somehow the phone had hard bricked itself. so started googling about for a solution. found this thread which lets me enter download mode at least. and if i follow the complete guide i can actually boot to setup screen and phone works. only problem is the external sd card only shows 76 mb free as its still partition form before. here is the link for reference http://pastebin(dot)com/7KQxRRNF remove dot and replace with .
right so what i want to know is how do i set boot to emmc so i can actually reformat that sd card so i can use it normally? i tried to install cf root via odin. it flashed fine but when it came to booting phone it wouldnt go past the black screen (that only says kernel in yellow at the top left) . left it on for about 20 mins and it was still on that screen. tried to boot into recovery and it totally messed up and said writing tf flash xxxsectors . then i was only able to boot to that screen no matter what i tried. so had to go reformat card again and re apply steps from that link.
so is there a solution so i can boot my phone normally again then root it and installl custom roms?
im stumped as to why this all even happened as i dont use xposed. and i hadnt changed anything once i installed aurora 4.1 .
phone = n910f .
now bootlooping
now bootloop
after trying to get into recovery it now loops and shows this message
boot recovery mode (in green)
check boot partitions
copy from t-flash
boot recovery
write 54464 sectors..
reboot
even if i remove battery wait put it back in and try boot into download that same set of messages come up and keep looping. anyone know wtf is going on lol
Have you referred this thread: http://forum.xda-developers.com/showthread.php?t=3488114
It also gives the same steps as the paste.bin site.
If you want to repartition your sd card, then you might have to use the EPM.
You can find all that you need, in the thread mentioned above.
Reporting Via N910G
constant looping
yashthemw said:
Have you referred this thread: http://forum.xda-developers.com/showthread.php?t=3488114
It also gives the same steps as the paste.bin site.
If you want to repartition your sd card, then you might have to use the EPM.
You can find all that you need, in the thread mentioned above.
Reporting Via N910G
Click to expand...
Click to collapse
hi thanks. the only problem is that now the phone only shows this message and nothing else no matter what i do.
boot recovery mode (in green)
check boot partitions
copy from t-flash
boot recovery
write 54464 sectors..
reboot
and it keeps rebooting then showing the message again and again.
bump
bump again? please surely someone has a solution . i dont want to move to another phone and then see my note 4 as a paper weight.
?????
dead4ngel said:
?????
Click to expand...
Click to collapse
Try this assuming you can get to Download Mode, credits to https://forum.xda-developers.com/showpost.php?p=70652492&postcount=10