Related
Hi Everyone,
In dire need of some help/advice...
I flashed the KF1 radio for my I9020a and lost 3G signal. It would connect on Edge sometimes but very infrequently. Several XDA members told me to try flashing any other radio with fastboot. I tried and still have no signal. Brainmaster told me to flash a radio that previously worked, pull the battery, reboot and wait for a few hours. I even tried restoring to a previous backup to no avail.
In recovery, I noticed that there was a Wimax partition - Does my phone think it's a Nexus S 4G now? Is that causing the problem?
What can I do?!
Did you flash a radio that wasn't specific to your device? Do you think that is a possibility.
xcoley said:
Did you flash a radio that wasn't specific to your device? Do you think that is a possibility.
Click to expand...
Click to collapse
I assume it's a possibility - I've done it multiple times before but I guess I could have been half-asleep this time...
I think that's. T-Mobile radio u flashed... if anything pull the 3 files from the efs folder and move them into the root of your SD Card but you need Root explorer... u can find the file in 4shared.com version 2.16 ... but make sure u flash a different radio before moving them... the files u need to move are
Nv.log
Nv_data.bin
Nv_data.bin.md5
Sent From In between Your Moms Boobies
YourMainDude said:
I think that's. T-Mobile radio u flashed... if anything pull the 3 files from the efs folder and move them into the root of your SD Card but you need Root explorer... u can find the file in 4shared.com version 2.16 ... but make sure u flash a different radio before moving them... the files u need to move are
Nv.log
Nv_data.bin
Nv_data.bin.md5
Sent From In between Your Moms Boobies
Click to expand...
Click to collapse
THANK YOU!!! I thought I did this before, but you pointed out that I had to flash a different radio first.
...and the abused Nexus S with a n00b of an owner lives another day
http://forum.xda-developers.com/showthread.php?t=1116884
try UCKF1 , there are 10 radios , i think you will find right one...
i have seen other post like you who experienced lost signal , which is flashed wrong radio ...
i have the same problem and im searching for a solution too
theadb said:
THANK YOU!!! I thought I did this before, but you pointed out that I had to flash a different radio first.
...and the abused Nexus S with a n00b of an owner lives another day
Click to expand...
Click to collapse
^_^ glad your phone is running well
Sent From In between Your Moms Boobies
haitham18 said:
i have the same problem and im searching for a solution too
Click to expand...
Click to collapse
Follow the guide I posted
Sent From In between Your Moms Boobies
theadb said:
THANK YOU!!! I thought I did this before, but you pointed out that I had to flash a different radio first.
...and the abused Nexus S with a n00b of an owner lives another day
Click to expand...
Click to collapse
Glad to hear it . I love the Nexus S...
MC
Hi, today i flash my defy+ with this sbf DEFYPLUS_U3_4.5.1-134_DFP-188_TMOUK,
The problem is i cant root, and cant change the sbf by another.
Is i flash another, the phone no boot, a not show anything on screen, led are off.
Only work whith the t-mobile sbf, but i dont have signal and my batery dont charge.
Anyone have any solution for this, please help me.
Sorry my bad english, im argentine!
jonatan25 said:
Hi, today i flash my defy+ with this sbf DEFYPLUS_U3_4.5.1-134_DFP-188_TMOUK,
The problem is i cant root, and cant change the sbf by another.
Is i flash another, the phone no boot, a not show anything on screen, led are off.
Only work whith the t-mobile sbf, but i dont have signal and my batery dont charge.
Anyone have any solution for this, please help me.
Sorry my bad english, im argentine!
Click to expand...
Click to collapse
Try this solution
h**p://vulnfactory.org/blog/2012/02/11/rooting-the-droid-4-a-failed-bounty-experiment/
thx but dont work...
Did you see this from the XDA thread about that sbf:
NO DOWNGRADE TO ANY 2.3.6 rom or 2.3.4 or FROYO/ECLAIR and no root if you flash full sbf
i see it too late... i´m sending my phone to official service, is on guarantee, i hope they can change or repair my phone, if not, i be too sad.
Only can wait and if they not repair or change, i have a very nice mini netbook
thanks for help !
You can try this http://forum.xda-developers.com/showthread.php?t=1486731
Is a new sbf with CG ver 6 and Froyo Kernel, then you can flash any ROM that uses Froyo kernel
EDIT
Sorry, that doesn't work, you flashed the CG ver 7
LeonardoJegigzem said:
You can try this http://forum.xda-developers.com/showthread.php?t=1486731
Is a new sbf with CG ver 6 and Froyo Kernel, then you can flash any ROM that uses Froyo kernel
EDIT
Sorry, that doesn't work, you flashed the CG ver 7
Click to expand...
Click to collapse
4.5.1-134_DFP-188 has BL7
jonatan25 said:
i see it too late... i´m sending my phone to official service, is on guarantee, i hope they can change or repair my phone, if not, i be too sad.
Only can wait and if they not repair or change, i have a very nice mini netbook
thanks for help !
Click to expand...
Click to collapse
hey man, you repaired your phone, i have a bricked defy+, where testing many solutions i just do it power on without battery detector, and works well if 3g disabled, i would like put as original and working all =\
I am using MS2Green0.3 rom (2.3.4). I have signal problem, signals disappears after some time and then back after long time.
Is there any fix for signals Or do i change Rom?
Defy Baseband Switcher
Have you tried Defy Baseband Switcher??...
If you're having about a wifi signal then you have to set the IP lease time on your router to anything but unlimited. That should solve the problem.
Vicsa said:
If you're having about a wifi signal then you have to set the IP lease time on your router to anything but unlimited. That should solve the problem.
Click to expand...
Click to collapse
Wifi signals are good, no problem with that. I have problem with SIM signals.
sonric is right then, baseband switcher might help you. Check out this thread then. Good luck
Vicsa said:
sonric is right then, baseband switcher might help you. Check out this thread then. Good luck
Click to expand...
Click to collapse
doesnt work for me problem is still there signals are coming and going after a while... could you let me know any other good ROM for 2.3.4. I have search forum but still confuse.
Currently I'm using this ROM 2nd version on my defy+. It's the latest 2.3.6 though, but you can always downgrade if you don't like it. Make sure you make nandroid backup of your current ROM in case the things go wrong. If you decide to install it, don't freak out because of its battery indicator. It has 10% increments (on MS2GINGER is that 1%).
Vicsa said:
Currently I'm using this ROM 2nd version on my defy+. It's the latest 2.3.6 though, but you can always downgrade if you don't like it. Make sure you make nandroid backup of your current ROM in case the things go wrong. If you decide to install it, don't freak out because of its battery indicator. It has 10% increments (on MS2GINGER is that 1%).
Click to expand...
Click to collapse
line from Threat:
Compatible Devices: Motorola Defy Plus (MB526), Motorola Defy (MB525 - Bayer camera module only, devices with green lens is not supported)
I have green lens defy MB525 with Android 2.3.4. Is provided rom will work on it? if not please provide compatible rom. OR good way to upgrade to 2.3.6. Thanks
Oh boy, green lens?
This is the right ROM for you
Vicsa said:
Oh boy, green lens?
This is the right ROM for you
Click to expand...
Click to collapse
ah! this is for Defy Green Lens [Android 2.3.6] , but i am on 2.3.4 doesnt work for me.
Man, thats a nandroid. You can always downgrade to 2.3.4 if you want to.
Vicsa said:
Man, thats a nandroid. You can always downgrade to 2.3.4 if you want to.
Click to expand...
Click to collapse
OK for GGL rom that you provide, need any sbf fix or just do it on 2.3.4?
Vicsa said:
Man, thats a nandroid. You can always downgrade to 2.3.4 if you want to.
Click to expand...
Click to collapse
ok for GGL ROM, need to flash sbf or just install the rom on 2.3.4?
When you make a nandroid backup of a ROM, you make a COMPLETE backup of that ROM. So you don't need any fixed sbf if you want to flash it. This is, as I mentioned before, a nandroid backup.
Vicsa said:
When you make a nandroid backup of a ROM, you make a COMPLETE backup of that ROM. So you don't need any fixed sbf if you want to flash it. This is, as I mentioned before, a nandroid backup.
Click to expand...
Click to collapse
ok going to try it. Inform you know later
Vicsa said:
When you make a nandroid backup of a ROM, you make a COMPLETE backup of that ROM. So you don't need any fixed sbf if you want to flash it. This is, as I mentioned before, a nandroid backup.
Click to expand...
Click to collapse
doesnt work. you know any other nice rom?
slhysf said:
doesnt work. you know any other nice rom?
Click to expand...
Click to collapse
Damn man. Maybe you should follow the install procedure of walter79 on this one. Did you wipe data and cashe before flashing it? I'm out off suggestions man, hope you get it right.
I've been looking around and found nothing about this... So, a little back story...
Yesterday I updated to CM9, and it all was good. Trying to tune it, I elevated the number of touchscreen points (dont remember well the name of that option) to 4... but then I was like "why I need that much? Let's reduce to default" and screen no longer recognices touch keypress, not even the softkeys are working... Thought it was a CM9 bug and restored to original stock rom and bug still present...
Anybody has faced this? USB Debugging is disabled, so no way to extract a logcat (sorry for that)...
dbarrera said:
I've been looking around and found nothing about this... So, a little back story...
Yesterday I updated to CM9, and it all was good. Trying to tune it, I elevated the number of touchscreen points (dont remember well the name of that option) to 4... but then I was like "why I need that much? Let's reduce to default" and screen no longer recognices touch keypress... Thought it was a CM9 bug and restored to original stock rom and bug still present...
Anybody has faced this? USB Debugging is disabled, so no way to extract a logcat (sorry for that)...
Click to expand...
Click to collapse
Did You wipe data too apart from cache and dalvik while reverting ?
AnkurBedi said:
Did You wipe data too apart from cache and dalvik while reverting ?
Click to expand...
Click to collapse
I tried that, performed a Factory Reset with CM9 and no go. Restored back to Froyo and screen still doesn't respond.
dbarrera said:
I tried that, performed a Factory Reset with CM9 and no go. Restored back to Froyo and screen still doesn't respond.
Click to expand...
Click to collapse
Try flashing the kernel again and then the ROM zip .
AnkurBedi said:
Try flashing the kernel again and then the ROM zip .
Click to expand...
Click to collapse
Full wipe > Kernel > CM9 > Cache/Dalvik wipe > boot
Nothing
dbarrera said:
Full wipe > Kernel > CM9 > Cache/Dalvik wipe > boot
Nothing
Click to expand...
Click to collapse
The new Boot menu is touch enabled . Does the touch get recognized there ?
i am using CM 10 .
PS : From advanced try fix permissions too . I am at a loss to other solutions , apart from flashing fixed sbfs
Nope, yesterday (while working) a blue dot appeared where I touched in the recovery screen. Now, not even that... =(
I've been searching all around and found out I'm not the only one with this problem... Some have solved it by removing the sd card, I tried that solution and no luck... Guess I'll be flashing a sbf and pray for some warranty luck...
dbarrera said:
I've been searching all around and found out I'm not the only one with this problem... Some have solved it by removing the sd card, I tried that solution and no luck... Guess I'll be flashing a sbf and pray for some warranty luck...
Click to expand...
Click to collapse
Flashing a stock sbf would work, it worked atleast for me when i too did the same a month ago. Best of luck
Sent from my alienware lappy
vedang81 said:
Flashing a stock sbf would work, it worked atleast for me when i too did the same a month ago. Best of luck
Sent from my alienware lappy
Click to expand...
Click to collapse
Really? Which SBF version you flashed?
dbarrera said:
Really? Which SBF version you flashed?
Click to expand...
Click to collapse
I dnt remember properly just google stock sbfs for defy plus... flash it through rsd. It should work for u. And forst of all it doesn't matter vich one u flash coz u just want to ur phone to start up.. so u decide.. later u got options
Sent from my alienware lappy
vedang81 said:
I dnt remember properly just google stock sbfs for defy plus... flash it through rsd. It should work for u. And forst of all it doesn't matter vich one u flash coz u just want to ur phone to start up.. so u decide.. later u got options
Sent from my alienware lappy
Click to expand...
Click to collapse
True... Oh well... When I get home I'll get into it...
dbarrera said:
True... Oh well... When I get home I'll get into it...
Click to expand...
Click to collapse
I read ur thread abt what next... is it so that u don't know baseband num or kernel or whatever it is? The only option is flash all
Although here's the link to all sbfs for defy and defy plus http://forum.xda-developers.com/showthread.php?t=966537
Enjoy
Sent from my alienware lappy
Flash all, One must work... right? Yeah... I think I'll get into it... In my signature is the original version that came loaded, if it helps in any way...
I read that thread and it points to other threads where I have to fish the DL links... ATM, I'm downloading a CEE (wth does CEE means?) version... Office internet connection sucks, so for the other SBFs I'll download when I get home...
dbarrera said:
Flash all, One must work... right? Yeah... I think I'll get into it... In my signature is the original version that came loaded, if it helps in any way...
I read that thread and it points to other threads where I have to fish the DL links... ATM, I'm downloading a CEE (wth does CEE means?) version... Office internet connection sucks, so for the other SBFs I'll download when I get home...
Click to expand...
Click to collapse
As per i remember i flashed 2 or 3 for my Defy... if its wrong it wnt boot... aftr 2-3 attempts i succeeded. No idea abt that CEE. But thats the option coz i dnt think warranty would help here though worth a try.
Sent from my alienware lappy
Please ask all questions in the Q&A section. Thread moved there.
TeeJay3800 said:
Please ask all questions in the Q&A section. Thread moved there.
Click to expand...
Click to collapse
Sorry and thanks for the heads up...
Tried Latin America (Retail, Claro), British (Retail)' and no luck so far.. Iusacell Mexico, Claro Latin America previous version, T-Mobile US are in line downloading... Just wondering, couldn't it be the digitizer that is malfunctioning? I have a 2-year warranty still (bought at Best Buy)...
So, I went through Hell and back... Flashed Retail and Carrier SBFs and no luck..Which makes me think that problem is officially hardware... I'll flash an english SBF so I can send it back for warranty.. Fingers crossed... Thanks for your help anyway...
dbarrera said:
So, I went through Hell and back... Flashed Retail and Carrier SBFs and no luck..Which makes me think that problem is officially hardware... I'll flash an english SBF so I can send it back for warranty.. Fingers crossed... Thanks for your help anyway...
Click to expand...
Click to collapse
Sent from my HTC Wildfire S A510e using xda premium
Alright guys?
I want to go back to gingerbread, after having been tempted by the bright lights of ICS, and realising that actually they really aren't that bright. I've played with all sorts of roms, from aurora to shendu to pacman to cyanogenmod 10, all over the place. I've only very recently realised that the best thing for my phone, is to head on back to gingerbread, and install cm7.2.
But I can't. I keep trying a million different methods, and my phone simple responds with 'update failed'.
This is what's in the .log file:
Failure: OSBL°æ±¾¼ì²éʧ°Ü.
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Does anyone have any idea what's going wrong here?
I've tried it with no battery, same result.
I've followed the guides on here, same result.
I've tried only flashing part 2, same result.
Can someone please talk me through this? It's doing my head in and I just want a phone that works.
Going back to gingerbread
trionix said:
Alright guys?
I want to go back to gingerbread, after having been tempted by the bright lights of ICS, and realising that actually they really aren't that bright. I've played with all sorts of roms, from aurora to shendu to pacman to cyanogenmod 10, all over the place. I've only very recently realised that the best thing for my phone, is to head on back to gingerbread, and install cm7.2.
But I can't. I keep trying a million different methods, and my phone simple responds with 'update failed'.
This is what's in the .log file:
Failure: OSBL°æ±¾¼ì²éʧ°Ü.
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Does anyone have any idea what's going wrong here?
I've tried it with no battery, same result.
I've followed the guides on here, same result.
I've tried only flashing part 2, same result.
Can someone please talk me through this? It's doing my head in and I just want a phone that works.
Click to expand...
Click to collapse
Do you have a nandroid backup of any gingerbread or froyo rom with 404020 baseband? for downgrading to GB without nandroid backup, try to flash 404020 baseband first and flash gb rom after all wipes.
Madhunath said:
Do you have a nandroid backup of any gingerbread or froyo rom with 404020 baseband? for downgrading to GB without nandroid backup, try to flash 404020 baseband first and flash gb rom after all wipes.
Click to expand...
Click to collapse
I have no backups at all, sorry.
How do I go about flashing 404020?
trionix said:
I have no backups at all, sorry.
How do I go about flashing 404020?
Click to expand...
Click to collapse
It can't be happened like this.
Try to reflash official ics with all steps and after that, boot the phone once to stock ics and then flash step 2 from official gb.
Note.
Rename the step2 to, UPDATE.APP , if you're not rename it.
Sent from my U8800pro using xda premium
Okay, I've done it.
I used roadkil's disk image to install the froyo. Then I flashed gingerbread 572, and it installed, finally. Excellent stuff!
BUT now the phone is network locked (I think). It's refusing to connect to the network. I installed the cm7.2 rom (which incidentally is very nice to use), but yeah. I can use it for everything, other than as a phone.
Any ideas? I need it unlocked tomorrow, because I have a date and if my phone doesn't work, I can't contact the girl! Help!
EDIT: I'll make a new topic.
trionix said:
Okay, I've done it.
I used roadkil's disk image to install the froyo. Then I flashed gingerbread 572, and it installed, finally. Excellent stuff!
BUT now the phone is network locked (I think). It's refusing to connect to the network. I installed the cm7.2 rom (which incidentally is very nice to use), but yeah. I can use it for everything, other than as a phone.
Any ideas? I need it unlocked tomorrow, because I have a date and if my phone doesn't work, I can't contact the girl! Help!
EDIT: I'll make a new topic.
Click to expand...
Click to collapse
Oh God, you have a -51 ..
Please tell us that you have -51 .
The procedure is different on Pro.
Anyway, please don't make useless threads.
If you tell us that you have a -51 on CM7.2 Mod thread , then someone would help you.
So anything else you want to ask for this rom, go to the right thread and ask or tell us your problem.
For your problem now, ask somcom3x or danidable on CM7 thread, i'm sure that they can help you , cause they are -51 users.
Regards.
Sent from my U8800pro using xda premium
gkalenis said:
Oh God, you have a -51 ..
Please tell us that you have -51 .
The procedure is different on Pro.
Anyway, please don't make useless threads.
If you tell us that you have a -51 on CM7.2 Mod thread , then someone would help you.
So anything else you want to ask for this rom, go to the right thread and ask or tell us your problem.
For your problem now, ask somcom3x or danidable on CM7 thread, i'm sure that they can help you , cause they are -51 users.
Regards.
Sent from my U8800pro using xda premium
Click to expand...
Click to collapse
Oh no....
I can unlock your phone if you upgrade to gb. MAKE SURE THERE IS A -51 OR BRICK.
Message me instead of opening threads please.
Sent from my SGH-T769 using Tapatalk 2